arXiv subjects

Shu Kanno

Publications and source records attributed to Shu Kanno.

At least 19 recordsLinked to original sources

arXiv2026

Point-group symmetry analysis of many-electron wavefunctions on a quantum computer

A point group is a set of spatial symmetry operations in molecular systems and is an indispensable tool for analyzing molecular orbitals and spectroscopy experiments in chemistry. Several quantum algorithms to exploit this symmetry have been proposed, but practical implementations of point-group symmetry operations and the detailed symmetry analysis of realistic many-electron wavefunctions are still missing. In this work, we propose an ancilla-free hybrid method to analyze point-group symmetries of many-electron states, which works for both abelian and non-abelian groups. For a given wavefunction, our method calculates the projection weights of point-group irreducible representations by applying orbital rotations derived from the eigenvectors of the representation matrices, making it applicable to arbitrary basis functions. The usefulness of our approach is demonstrated through numerical simulations of benzene and ferrocene molecules. Furthermore, we perform a hardware demonstration of the weight calculation of the ground state and the first excited state of benzene in $D_{2h}$ symmetry, using up to 32 qubits of IBM's ibm_kawasaki device. By combining a tensor-network based encoding scheme and error mitigation techniques, we find the weights of irreducible representations for both states are faithfully reproduced within a few percent error. Our results suggest that the proposed method serves as a practical tool for analyzing symmetry properties of many-electron wavefunctions in realistic material simulations on near-term and early fault-tolerant quantum computers.

quant-ph↗

arXiv2026

Generative Circuit Design for Quantum-Selected Configuration Interaction

Quantum-selected configuration interaction (QSCI) has emerged as a feasible approach for approximating electronic ground states on noisy quantum devices toward large-system demonstrations. In QSCI, Slater determinants are sampled from a quantum-prepared state, and the Hamiltonian is then diagonalized in the sampled subspace. To create a high-quality subspace under hardware constraints, the design of the state-preparation circuit is crucial. Here, we present a Generative Quantum Eigensolver (GQE)-based framework that optimizes ansatz structures using a Transformer policy trained on the QSCI subspace energy. We validate the framework on N2 in active spaces of up to 32 qubits. We found that the optimized circuits reach chemical precision with substantially lower gate counts than time-evolved circuits. Quantitatively, this corresponds to an average reduction of 98% in the required two-qubit gate count relative to the single-step first-order Trotterized approximation and 83% relative to the qDRIFT approximation. Furthermore, the resulting wavefunctions are competitive with heat-bath configuration interaction (HCI) in terms of compactness. In stretched-bond, strongly correlated regimes, they achieve chemical precision with subspaces that are 50% smaller than those required by HCI.

quant-ph↗

arXiv2026

Auger Spectroscopy via Generative Quantum Eigensolver: A Quantum Approach to Molecular Excitations

Auger electron spectroscopy, a way of characterizing electronic structure through core-level decay processes, is widely used in materials characterization; however direct calculation from molecular geometry requires accurate treatment of many excited states, posing a challenge for classical methods. We present a hybrid quantum-classical workflow for calculating Auger spectra that combines the generative quantum eigensolver (GQE) for ground-state preparation, the quantum self-consistent equation-of-motion method for excited-state calculations, and the one-centre approximation for Auger transition rates. GQE uses a GPT-2 model to generate quantum circuits for ground-state optimization, allowing our workflow to benefit from HPC parallelization and GPU-acceleration for favourable scaling with system size. We demonstrate the validity of our workflow by calculating the Auger spectrum of water with the STO-3G basis set and demonstrating qualitative and quantitative agreement with spectra obtained using completely classical full configuration interaction calculations, from the computational literature, and from the experimental literature. We also find that for water, substituting the variational quantum eigensolver (VQE) for GQE results in near-identical spectra, but that the ground state estimator generated by GQE contains about half the total gate count as that generated by VQE.

quant-ph↗

arXiv2026

Quantum Simulations for Extreme Ultraviolet Photolithography

A key challenge of extreme ultraviolet (EUV) lithography in semiconductor fabrication is the line edge roughness or "blur" produced by the electron cascades following absorption of a high-energy photon. Here we present quantum algorithms to compute EUV absorption and photoelectron emission spectra, which are key to predicting blur. The first is a time-domain algorithm resolving absorption at a given frequency; the second is a first-quantized plane-wave algorithm computing the photoemission spectrum via real-time dynamics that treats bound and continuum states on equal footing. For a model photoresist monomer IMePh, 92 eV absorption requires $200$ logical qubits and $10^{9}$ non-Clifford gates per circuit with $10^3$ shots, while the photoemission spectrum needs $\geq 10^{14}$ gates, $10^4$ shots, and several thousand logical qubits. These results establish high-fidelity quantum simulations as a key component to parameterize the multi-scale macroscopic models required to overcome the electron blur bottleneck in semiconductor miniaturization.

quant-ph↗

arXiv2026

Tensor-based phase difference estimation on time series analysis

We propose a phase-difference estimation algorithm based on the tensor-network circuit compression, leveraging time-evolution data to pursue scalability and higher accuracy on a quantum phase estimation (QPE)-type algorithm. Using tensor networks, we construct circuits composed solely of nearest-neighbor gates and extract time-evolution data by four-type circuit measurements. In addition, to enhance the accuracy of time-evolution and state-preparation circuits, we propose techniques based on algorithmic error mitigation and on iterative circuit optimization combined with merging into matrix product states, respectively. Verifications using a noiseless simulator for the 8-qubit one-dimensional Hubbard model using an ancilla qubit show that the proposed algorithm achieves accuracies with 0.4--4.7\% error from a true energy gap on an appropriate time-step size, and that accuracy improvements due to the algorithmic error mitigation are observed. We also confirm the enhancement of the overlap with matrix product states through iterative optimization. Finally, the proposed algorithm is demonstrated on IBM Heron devices with Q-CTRL error suppression for 8-, 36-, and 52-qubit models using more than 4,000 2-qubit gates. These largest-scale demonstrations for the QPE-type algorithm represent significant progress not only toward practical applications of near-term quantum computing but also toward preparation for the era of error-corrected quantum devices.

quant-ph↗

arXiv2025

Quantum phase estimation based filtering: performance analysis and application to low-energy spectral calculation

Filtering is an important technique in quantum computing used for isolating or enhancing some specific states of quantum many-body systems. In this paper, we analyze the performance of filters based on the quantum phase estimation (QPE) algorithm, in which filtering removes states associated with bitstrings in the ancilla register above a given threshold. We show that when the conventional rectangular window function is used for the QPE input state, the resulting filter function exhibits an oscillating behavior known as the Gibbs phenomenon. We also show that in the case of the sine and Kaiser windows, this phenomenon is suppressed. Furthermore, we perform numerical simulations to compare the number of necessary queries to the Hamiltonian time evolution operation of for the QPE-based filtering algorithm and the quantum eigenvalue transformation of unitary matrices with real polynomials (QETU). We find that the number of queries required for Kaiser window-based filtering is comparable to that for QETU with optimized phase angles. As an application of the QPE-based filter, we also study a two-step algorithm for low-energy spectral simulations, composed of a coarse grid for filtering and a fine grid for obtaining final high-resolution spectra. As a benchmark of the proposed scheme for realistic continuous spectra, we present the density-of-states (DOS) calculation of antiferromagnetic type-II MnO in a one-particle approximation.

quant-ph↗

arXiv2025

Efficient implementation of randomized quantum algorithms with dynamic circuits

Randomized algorithms are crucial subroutines in quantum computing, but the requirement to execute many types of circuits on a real quantum device has been challenging to their extensive implementation. In this study, we propose an engineering method to reduce the executing time for randomized algorithms using dynamic circuits, i.e., quantum circuits involving intermediate measurement and feedback processes. The main idea is to generate the probability distribution defining a target randomized algorithm on a quantum computer, instead of a classical computer, which enables us to implement a variety of static circuits on a single dynamic circuit with many measurements. We applied the proposed method to the task of random Pauli measurement for one qubit on an IBM superconducting device, showing that a 14,000-fold acceleration of executing time was observed compared with a conventional method using static circuits. Additionally, for the problem of estimating expectation values of 28- and 40-qubit hydrogen chain models, we successfully applied the proposed method to realize the classical shadow with 10 million random circuits, which is the largest demonstration of classical shadow. This work significantly simplifies the execution of randomized algorithms on real quantum hardware.

quant-ph↗

arXiv2024

Hamiltonian simulation-based quantum-selected configuration interaction for large-scale electronic structure calculations with a quantum computer

Quantum-selected configuration interaction (QSCI) is an approach for quantum chemical calculations using current quantum computers. In conventional QSCI, Slater determinants used for the wave function expansion are sampled by iteratively performing approximate wave function preparation and subsequent measurement in the computational basis, and then the subspace Hamiltonian matrix is diagonalized on a classical computer. In this approach, preparation of a high-quality approximate wave function is necessary to accurately compute total energies. Here we propose a Hamiltonian simulation-based QSCI (HSB-QSCI) to avoid this difficulty, by sampling the Slater determinants from quantum states generated by the real-time evolution of approximate wave functions. We provide numerical simulations for the lowest spin-singlet and triplet states of oligoacenes (benzene, naphthalene, and anthracene), phenylene-1,4-dinitrene, and hexa-1,2,3,4,5-pentaene. We found that the HSB-QSCI is applicable not only to molecules where the Hartree--Fock provides a good approximation of the ground state, but also to strongly correlated systems where preparing a high-quality approximate wave function is hard. Hardware demonstrations of the HSB-QSCI are also reported for carbyne molecules expressed by up to 36 qubits, using an IBM Quantum processor. The HSB-QSCI captures more than 99.18\% of the correlation energies in the active space by considering about 1\% of all the Slater determinants in 36 qubit systems, illustrating the ability of the proposed method to efficiently consider important electronic configurations.

quant-ph↗

arXiv2024

Optimizing a parameterized controlled gate using Free Quaternion Selection

In variational quantum algorithms, parameterization is typically applied to single-qubit gates.In this study, we instead parameterize a generalized controlled gate and propose an algorithm to locally minimize the cost function by maximally optimizing these parameters. This method extends the Free Quaternion Selection (FQS) technique, which was originally developed for single-qubit gate optimization. To evaluate its performance, we apply the proposed method to a variety of quantum optimization tasks, including the Variational Quantum Eigensolver (VQE) for both Ising and molecular Hamiltonians, fidelity maximization in general variational quantum algorithms (VQAs), and unitary compilation of time evolution operators. Across these applications, our method demonstrates efficient optimization, enhanced expressibility, and the ability to construct shallower circuits compared to existing techniques. Moreover, the method can be generalized to optimize particle-number-conserving gates, which are particularly relevant for quantum chemistry. Leveraging this capability, we further demonstrate that the method achieves superior quantum compilation of molecular time-evolution operators by approximating them with shallower circuits than standard Trotter decomposition.

quant-ph↗

arXiv2024

Tensor-based quantum phase difference estimation for large-scale demonstration

We develop an energy calculation algorithm leveraging quantum phase difference estimation (QPDE) scheme and a tensor-network-based unitary compression method in the preparation of superposition states and time-evolution gates. Alongside its efficient implementation, this algorithm reduces depolarization noise affections exponentially. We demonstrated energy gap calculations for one-dimensional Hubbard models on IBM superconducting devices using circuits up to 32-system (plus one-ancilla) qubits, a five-fold increase over previous QPE demonstrations, at the 7242 controlled-Z gate level of standard transpilation, utilizing a Q-CTRL error suppression module. Additionally, we propose a technique towards molecular executions using spatial orbital localization and index sorting, verified linear polyene simulations up to 21 qubits. Since QPDE can handle the same objectives as QPE, our algorithm represents a leap forward in quantum computing on real devices.

quant-ph↗

arXiv2024

Quantum computing quantum Monte Carlo with hybrid tensor network for electronic structure calculations

Quantum computers have a potential for solving quantum chemistry problems with higher accuracy than classical computers. Quantum computing quantum Monte Carlo (QC-QMC) is a QMC with a trial state prepared in quantum circuit, which is employed to obtain the ground state with higher accuracy than QMC alone. We propose an algorithm combining QC-QMC with a hybrid tensor network to extend the applicability of QC-QMC beyond a single quantum device size. In a two-layer quantum-quantum tree tensor, our algorithm for the larger trial wave function can be executed than preparable wave function in a device. Our algorithm is evaluated on the Heisenberg chain model, graphite-based Hubbard model, hydrogen plane model, and MonoArylBiImidazole using full configuration interaction QMC. Our algorithm can achieve energy accuracy (specifically, variance) several orders of magnitude higher than QMC, and the hybrid tensor version of QMC gives the same energy accuracy as QC-QMC when the system is appropriately decomposed. Moreover, we develop a pseudo-Hadamard test technique that enables efficient overlap calculations between a trial wave function and an orthonormal basis state. In a real device experiment by using the technique, we obtained almost the same accuracy as the statevector simulator, indicating the noise robustness of our algorithm. These results suggests that the present approach will pave the way to electronic structure calculation for large systems with high accuracy on current quantum devices.

quant-ph↗

arXiv2024

Entanglement-assisted phase estimation algorithm for calculating dynamical response functions

Dynamical response functions are fundamental quantities to describe the excited-state properties in quantum many-body systems. Quantum algorithms have been proposed to evaluate these quantities by means of quantum phase estimation (QPE), where the energy spectra are directly extracted from the QPE measurement outcomes in the frequency domain. Accurate estimation of excitation energies and transition probabilities with these QPE-based approaches is, however, challenging because of the problem of spectral leakage (or peak broadening) which is inherent in the QPE algorithm. To overcome this issue, in this work we consider an extension of the QPE-based approach adopting the optimal entangled input states, which is known to achieve the Heisenberg-limited scaling for the estimation precision. We show that with this method the peaks in the calculated energy spectra are more localized than those calculated by the original QPE-based approaches, suggesting the mitigation of the spectral leakage problem. By analyzing the probability distribution with the entangled phase estimation, we propose a simple scheme to better estimate both the transition energies and the corresponding transition probabilities of the peaks of interest in the spectra. The validity of our prescription is demonstrated by numerical simulations in various quantum many-body problems: the spectral function of a simple electron-plasmon model in condensed-matter physics, the dipole transitions of the H$_2$O molecule in quantum chemistry, and the electromagnetic transitions of the $^6$Li nucleus in nuclear physics.

quant-ph↗

arXiv2023

Quantum channel decomposition with pre- and post-selection

The quantum channel decomposition techniques, which contain the so-called probabilistic error cancellation and gate/wire cutting, are powerful approach for simulating a hard-to-implement (or an ideal) unitary operation by concurrently executing relatively easy-to-implement (or noisy) quantum channels. However, such virtual simulation necessitates an exponentially large number of decompositions, thereby significantly limiting their practical applicability. This paper proposes a channel decomposition method for target unitaries that have their input and output conditioned on specific quantum states, namely unitaries with pre- and post-selection. Specifically, we explicitly determine the requisite number of decomposing channels, which could be significantly smaller than the selection-free scenario. Furthermore, we elucidate the structure of the resulting decomposed unitary. We demonstrate an application of this approach to the quantum linear solver algorithm, highlighting the efficacy of the proposed method.

quant-ph↗

arXiv2022

Excited state calculations using variational quantum eigensolver with spin-restricted ansätze and automatically-adjusted constraints

The ground and excited state calculations at key geometries, such as the Frank-Condon (FC) and the conical intersection (CI) geometries, are essential for understanding photophysical properties. To compute these geometries on noisy intermediate-scale quantum devices, we proposed a strategy that combined a chemistry-inspired spin-restricted ansatz and a new excited state calculation method called the variational quantum eigensolver under automatically-adjusted constraints (VQE/AC). Unlike the conventional excited state calculation method, called the variational quantum deflation, the VQE/AC does not require the pre-determination of constraint weights and has the potential to describe smooth potential energy surfaces. To validate this strategy, we performed the excited state calculations at the FC and CI geometries of ethylene and phenol blue at the complete active space self-consistent field (CASSCF) level of theory, and found that the energy errors were at most 2 kcal mol$^{-1}$ even on the ibm_kawasaki device.

quant-ph↗

arXiv2022

Resource estimations for the Hamiltonian simulation in correlated electron materials

Correlated electron materials, such as superconductors and magnetic materials, are regarded as fascinating targets in quantum computing. However, the quantitative resources, specifically the number of quantum gates and qubits, required to perform a quantum algorithm to simulate correlated electron materials remain unclear. In this study, we estimate the resources required for the Hamiltonian simulation algorithm for correlated electron materials, specifically for organic superconductors, iron-based superconductors, binary transition metal oxides, and perovskite oxides, using the fermionic swap network. The effective Hamiltonian derived using the $ab~initio$ downfolding method is adopted for the Hamiltonian simulation, and a procedure for the resource estimation by using the fermionic swap network for the effective Hamiltonians including the exchange interactions is proposed. For example, in the system for the $10^2$ unit cells, the estimated number of gates per Trotter step and qubits are approximately $10^7$ and $10^3$, respectively, on average for the correlated electron materials. Furthermore, our results show that the number of interaction terms in the effective Hamiltonian, especially for the Coulomb interaction terms, is dominant in the gate resources when the number of unit cells constituting the whole system is up to $10^2$, whereas the number of fermionic swap operations is dominant when the number of unit cells is more than $10^3$.

quant-ph↗

arXiv2022

Quantum algorithm for a chemical reaction path optimization by using a variational quantum algorithm and a reaction path generation

The search for new computational tasks of quantum chemistry that can be performed on current quantum computers is important for the development of quantum computing and quantum chemistry. Although calculations of chemical reactions have a wide range of applications in quantum chemical calculations, a quantum algorithm for obtaining activation energy $E_a$, which determines the rate of chemical reactions, has not been performed. In this study, we propose a quantum algorithm for the chemical reaction path optimization to obtain $E_a$. In our algorithm, quantum circuits can be used not only for the energy evaluation by the variational quantum eigensolver (VQE) but also for chemical reaction path generation. The chemical reaction path is obtained by encoding the initial reaction path to the circuit, operating parameterized gates, and extracting the path information by measurement. The nudged elastic band method was used for optimizing a reaction path, and the ground-state calculation for each state on the path was performed by the VQE or the exact diagonalization (ED). The proposed algorithm was applied to $\mathrm{H}_2 + \mathrm{H} \rightarrow \mathrm{H}_2 + \mathrm{H}$ reaction, and we confirmed that $E_a$ was obtained accurately in the case of both the VQE and the ED. We also obtained numerical results that the entanglement between the images accelerates the path optimization. From these results, we show the feasibility of performing fast and accurate chemical reaction calculations by using quantum algorithms.

quant-ph↗

arXiv2021

Electronic correlation strength of inorganic electrides from first principles

We present a systematic study clarifying an electronic correlation trend of electrides from first principles. By using the maximally localized Wannier function and the constrained random phase approximation, we calculated the electronic correlation strength $(U-U_{nn})/|t|$ of 19 inorganic electrides, where $U$, $U_{nn}$, and $t$ are the effective onsite Coulomb repulsion, nearest-neighbor Coulomb repulsion, and the nearest-neighbor transfer integrals, respectively. The electronic correlation was found to be highly correlated with the dimensionality of the Wannier-function network of anionic electrons in electrides; the correlation strength varies in the order 0D $>>$ 1D $>$ 2D $\sim$ 3D, showing good correspondence with experimental trends, and exceeds 10 (a measure for the emergence of exotic properties) in all the 0D systems and some of the 1D materials. We also found that the electronic correlation depends on the cation species surrounding the anionic electrons; in the 1D electrides, the electronic correlation becomes stronger for cationic walls consisting of $\mathrm{Ca^{2+}}$, $\mathrm{Sr^{2+}}$, and $\mathrm{Ba^{2+}}$ in this order, and the correlation strength exceeds 10 for $\mathrm{Ba_5As_3}$. The theoretical results indicate that 0- and 1-dimensional electrides will be new research targets for studies on strongly correlated electron systems.

cond-mat.str-el↗

arXiv2021

Quantum algorithm for calculation of transition amplitudes in hybrid tensor networks

The hybrid tensor network approach allows us to perform calculations on systems larger than the scale of a quantum computer. However, when calculating transition amplitudes, there is a problem that the number of terms to be measured increases exponentially with that of contracted operators. The problem is caused by the fact that the contracted operators are represented as non-Hermitian operators. In this study, we propose a method for the hybrid tensor network calculation that contracts non-Hermitian operators without the exponential increase of the number of terms. In the proposed method, calculations of transition amplitudes are performed by combining the singular value decomposition of the contracted non-Hermitian operators with the Hadamard test. The method significantly extends the applicability of the hybrid tensor network approach.

quant-ph↗