SearcharxivSearch

arXiv subjects

Shu-Chi Wu

Publications and source records attributed to Shu-Chi Wu.

4 recordsLinked to original sources

Scalable Quantum Molecular Generation via GPU-Accelerated Tensor-Network Simulation

We propose Scalable Quantum Molecular Generation (SQMG), a variational quantum-circuit for sampling molecular graphs using chemical priors on atoms and bonds. SQMG assigns a fixed 3-qubit register to each heavy atom and reuses a single 2-qubit bond register to generate bonds sequentially, yielding an ''atom no-reuse, bond reuse'' architecture with linear qubit scaling. Measurement results are mapped to molecular graphs via lightweight classical decoding with structural constraints. In CUDA-Q, we benchmark the state-vector simulation (CPU/GPU) and the tensor-network simulation (GPU). At $N=8$ heavy atoms, the state-vector simulator (GPU) and the tensor-network simulator (GPU) achieve speeds of up to $4.5\times 10^{4}$ and $2.2\times 10^{3}$ over the state-vector (CPU) baseline, respectively. Crucially, tensor-network simulation extends exact simulation to $N=40$ heavy atoms, where state-vector methods become memory-limited. For training, Bayesian optimization outperforms COBYLA on a Validity$\times$Uniqueness objective, and the same architecture supports \textit{de novo} generation, scaffold decoration, and linker design. Overall, SQMG provides a scalable, reproducible testbed for evaluating accelerated tensor-network simulation and future quantum molecular generation algorithms.

quant-ph

Rechargeable Li/Cl$_2$ battery down to -80 °C

Low temperature rechargeable batteries are important to life in cold climates, polar/deep-sea expeditions and space explorations. Here, we report ~ 3.5 - 4 V rechargeable lithium/chlorine (Li/Cl2) batteries operating down to -80 °C, employing Li metal negative electrode, a novel CO2 activated porous carbon (KJCO2) as the positive electrode, and a high ionic conductivity (~ 5 to 20 mS cm-1 from -80 °C to 25 °C) electrolyte comprised of 1 M aluminum chloride (AlCl3), 0.95 M lithium chloride (LiCl), and 0.05 M lithium bis(fluorosulfonyl)imide (LiFSI) in low melting point (-104.5 °C) thionyl chloride (SOCl2). Between room-temperature and -80 °C, the Li/Cl2 battery delivered up to ~ 30,000 - 4,500 mAh g-1 first discharge capacity and a 1,200 - 5,000 mAh g-1 reversible capacity (discharge voltages in ~ 3.5 to 3.1 V) over up to 130 charge-discharge cycles. Mass spectrometry and X-ray photoelectron spectroscopy (XPS) probed Cl2 trapped in the porous carbon upon LiCl electro-oxidation during charging. At lower temperature down to -80 °C, SCl2/S2Cl2 and Cl2 generated by electro-oxidation in the charging step were trapped in porous KJCO2 carbon, allowing for reversible reduction to afford a high discharge voltage plateau near ~ 4 V with up to ~ 1000 mAh g-1 capacity for SCl2/S2Cl2 reduction and up to ~ 4000 mAh g-1 capacity at ~ 3.1 V plateau for Cl2 reduction. Towards practical use, we made CR2032 Li/Cl2 battery cells to drive digital watches at -40 °C and light emitting diode at -80 °C, opening Li/Cl2 secondary batteries for ultra-cold conditions.

physics.app-ph

Shedding Light on Rechargeable Na/Cl$_2$ Battery

Advancing new ideas of rechargeable batteries represents an important path to meeting the ever increasing energy storage needs. Recently we showed rechargeable sodium/chlorine (Na/Cl$_2$) (or lithium/chlorine Li/Cl$_2$) batteries that used a Na (or Li) metal negative electrode, a microporous amorphous carbon nanosphere (aCNS) positive electrode and an electrolyte containing dissolved AlCl$_3$ and fluoride additives in thionyl chloride (SOCl$_2$). The main battery redox reaction involved conversion between NaCl and Cl$_2$ trapped in the carbon positive electrode, delivering a cyclable capacity of up to 1200 mAh g$^{-1}$ (based on positive electrode mass) at a ~ 3.5 V discharge voltage. Here, we discovered by X-ray photoelectron spectroscopy (XPS) that upon charging a Na/Cl$_2$ battery, chlorination of carbon in the positive electrode occurred to form C-Cl accompanied by molecular Cl$_2$ infiltrating the porous aCNS, consistent with Cl$_2$ probed by mass spectrometry. Synchrotron X-ray diffraction observed the development of graphitic ordering in the initially amorphous aCNS under battery charging when the carbon matrix was oxidized/chlorinated and infiltrated with Cl$_2$. The C-Cl, Cl$_2$ species and graphitic ordering were reversible upon discharge, accompanied by NaCl formation. The results revealed redox conversion between NaCl and Cl$_2$, reversible graphitic ordering/amorphourization of carbon through battery charge/discharge, and for the first time probed trapped Cl$_2$ in porous carbon by XPS.

physics.app-ph

High-Capacity Rechargeable $Li/Cl_2$ Batteries with Graphite Positive Electrodes

Developing new types of high-capacity and high-energy density rechargeable battery is important to future generations of consumer electronics, electric vehicles, and mass energy storage applications. Recently we reported ~ 3.5 V sodium/chlorine $(Na/Cl_2)$ and lithium/chlorine $(Li/Cl_2)$ batteries with up to 1200 mAh $g^{-1}$ reversible capacity, using either a Na or Li metal as the negative electrode, an amorphous carbon nanosphere (aCNS) as the positive electrode, and aluminum chloride $(AlCl_3)$ dissolved in thionyl chloride $(SOCl_2)$ with fluoride-based additives as the electrolyte. The high surface area and large pore volume of aCNS in the positive electrode facilitated NaCl or LiCl deposition and trapping of $Cl_2$ for reversible $NaCl/Cl_2$ or $LiCl/Cl_2$ redox reactions and battery discharge/charge cycling. Here we report an initially low surface area/porosity graphite (DGr) material as the positive electrode in a $Li/Cl_2$ battery, attaining high battery performance after activation in carbon dioxide $(CO_2)$ at 1000 °C (DGr_ac) with the first discharge capacity ~ 1910 mAh $g^{-1}$ and a cycling capacity up to 1200 mAh $g^{-1}$. Ex situ Raman spectroscopy and X-ray diffraction (XRD) revealed the evolution of graphite over battery cycling, including intercalation/de-intercalation and exfoliation that generated sufficient pores for hosting $LiCl/Cl_2$ redox. This work opens up widely available, low-cost graphitic materials for high-capacity alkali metal/$Cl_2$ batteries. Lastly, we employed mass spectrometry to probe the $Cl_2$ trapped in the graphitic positive electrode, shedding light into the $Li/Cl_2$ battery operation.

physics.app-ph