arXiv subjects

Shuai S. A. Yuan

Publications and source records attributed to Shuai S. A. Yuan.

17 recordsLinked to original sources

arXiv2026

Wearable metasurfaces for boosting the effective area of mobile-device antennas

Wireless communications increasingly face scenarios with compact user equipments operating in propagation environments where signal blockage, absorption, and device size limitations strongly constrain link performance. Most approaches to wireless-link enhancement focus either on improving base-station antenna systems, for example, through massive MIMO architectures; on engineering the propagation environment using reconfigurable intelligent surfaces and active relays. Here, we propose an alternative user-side strategy for improving wireless links based on wearable metasurfaces that enhance the effective antenna area of compact wireless devices. The proposed passive metasurface is integrated into clothing and engineered to collect the power of electromagnetic waves incident on user's body and route the collected power toward a mobile device in the form of surface waves. This mechanism significantly increases the effective receiving and transmitting area of the device antenna and its gain without external power sources, active control electronics, or additional stand-alone hardware. We implement the concept on a hoodie textile using a scalable screen-printing process with conductive silver ink and demonstrate an approximately tenfold enhancement of the received signal at 26 GHz. This passive approach effectively brings the human body into the communication network by turning clothing into a virtual thin and flexible lens for focusing the incident power on the user equipment.

physics.optics↗

arXiv2026

Metacrystals: Inversely-designed 3D-printed intelligent panels for 6G communications

Metasurfaces represent a promising platform for improving coverage in future communication systems. Passive designs are especially attractive because they need no power supply and can be manufactured at low cost. However, most passive metasurfaces work well only for one polarization, frequency band, or incidence angle, which limits their practical use. Here we propose passive intelligent panels, termed metacrystals, that overcome these limitations by enabling highly complex multiplexed responses to multiple incident waves simultaneously and independently. This capability is enabled by a compact volumetric architecture that goes beyond conventional metasurfaces by exploiting a finite, yet still modest, thickness to unlock substantially more degrees of freedom. Through simulations and experiments, we demonstrate all-dielectric metacrystals capable of simultaneously controlling anomalous reflection and absorption, both in transmission and reflection regimes. Designed using inverse topology optimization, these metacrystals combine structural integrity, straightforward scalability, and compatibility with low-cost 3D printing for operation up to 100 GHz.

physics.optics↗

arXiv2026

Non-Reciprocal Dynamic Metasurface Antenna: Practical Multiport-Network Modeling and Optimization for Multi-User Interference Resilience

Channel reciprocity fundamentally limits full-duplex (FD) base stations due to multi-user co-channel interference. We examine the potential of deploying a non-reciprocal dynamic metasurface antenna (NR-DMA) at the base station to overcome this limitation. Our NR-DMA architecture connects a single circulator to three feed ports of a multi-feed DMA with strong mutual coupling (MC) between its seven feeds and 96 1-bit-programmable meta-elements. We model our system with multiport network theory, using experimentally estimated proxy parameters of a fabricated 19-GHz DMA and the measured circulator response. Our NR-DMA's reconfigurability is captured by a diagonal tunable scattering matrix, showing that non-reciprocal DMAs and RISs need not require a "beyond-diagonal" tunable scattering matrix. We jointly optimize the DMA state, analog feed weights, circulator-port assignment, and circulation direction. Our optimized NR-DMA realizes distinct forward and reverse channel responses. In our interference-limited high-SNR case study, the NR-DMA improves the FD sum rate by about 60% over a reciprocal DMA benchmark. Comparisons with proxy objectives and MC-unaware optimization show that end-to-end FD optimization and MC-aware modeling are both essential.

eess.SP↗

arXiv2026

Single-Frequency Symmetry-Empowered Through-Barrier Sensing in Reconfigurable Complex Media

Mirror symmetry can strongly enhance the transmission of waves through a barrier inside a complex medium. We recently showed that this phenomenon enables quantitative through-barrier sensing: by tuning programmable scatterers on one side of the barrier to maximize the broadband total transmission through the barrier, the characteristics of scatterers at mirror-symmetric positions on the other side of the barrier can be determined. Considering a sufficiently large bandwidth was crucial to ensure that no accidental narrowband asymmetric resonance can outperform the symmetry-induced transmission enhancement. Here, we overcome this scheme's vexing need for a large bandwidth by replacing the underlying frequency diversity with configurational diversity. Specifically, we introduce auxiliary tunable scatterers at mirror-symmetric positions on either side of the barrier and sweep their characteristics through a series of random mirror-symmetric configurations. We tune the programmable main scatterers on one side of the barrier to maximize the average of the total through-barrier transmission over a series of configurations of the auxiliary scatterers at a single frequency, in order to sense the characteristics of the main scatterers on the other side of the barrier. We systematically study the accuracy of our single-frequency sensing scheme based on a multiport-network system model that cascades two mirror-related wave-chaotic cavities with a weakly transmitting barrier in between. We further examine an extension to non-reciprocal chaotic cavities involving circulators. Altogether, our results establish configurational diversity as a route to single-frequency, symmetry-empowered through-barrier sensing in reconfigurable complex media.

physics.optics↗

arXiv2026

Electromagnetic Signal and Information Theory: A Continuous-Aperture Array Perspective

Emerging wireless systems are evolving toward larger, denser, higher-frequency, and more reconfigurable apertures, which motivates the study of continuous-aperture arrays (CAPAs). Unlike conventional spatially discrete arrays (SPDAs), CAPAs are more naturally modeled as spatially continuous electromagnetic apertures and therefore call for a fundamental shift in both signal processing and information-theoretic analysis. In particular, the underlying channels, signals, and beamformers are no longer finite-dimensional vectors and matrices, but continuous fields and operators governed by Maxwell's equations. This paper provides a tutorial overview of CAPA systems from the perspective of electromagnetic signal and information theory (ESIT), with an emphasis on the transition from discrete array models to physics-consistent continuous-aperture formulations. We review the electromagnetic foundations of CAPAs, practical hardware implementations, line-of-sight and multipath channel modeling, continuous-space beamforming and channel estimation, and the fundamental degrees of freedom and capacity limits of CAPA systems. We also highlight how tools such as wavenumber-domain methods, functional analysis, and compressive sensing can transform challenging infinite-dimensional problems into tractable finite-dimensional ones while preserving the essential physical structure of the channel. Overall, this tutorial aims to clarify the key principles, analytical tools, and open challenges that shape CAPA-enabled wireless communications.

cs.IT↗

arXiv2026

Symmetry-Empowered Through-Barrier Sensing in Complex Media

Symmetry strongly impacts wave transport in complex media. In this Letter, we demonstrate that the phenomenon of symmetry-induced through-barrier transmission enhancement enables quantitative sensing across barriers in complex media. We consider two mirror-symmetric chaotic cavities coupled through a narrow slit and containing point scatterers at mirror-symmetric positions. The characteristics of the scatterers in one cavity are unknown, whereas those of the scatterers in the other cavity are programmable. By tuning the programmable scatterers to maximize broadband total transmission, we recover the unknown scatterers' characteristics across the barrier. We show that reliable sensing requires a sufficiently large bandwidth, because otherwise a narrowband asymmetric resonant enhancement can dominate over the desired symmetry-induced enhancement. We further examine how absorption and barrier opacity influence the minimum required bandwidth. Our results establish a symmetry-empowered principle for through-barrier sensing in complex media, suggesting a route toward through-wall imaging in complex environments.

physics.optics↗

arXiv2026

On Systematic Performance of 3-D Holographic MIMO: Clarke, Kronecker, and 3GPP Models

Holographic multiple-input multiple-output (MIMO) has emerged as a key enabler for 6G networks, yet conventional planar implementations suffer from spatial correlation and mutual coupling at sub-wavelength spacing, which fundamentally limit the effective degrees of freedom (EDOF) and channel capacity. Three-dimensional (3-D) holographic MIMO offers a pathway to overcome these constraints by exploiting volumetric array configurations that enlarge the effective aperture and unlock additional spatial modes. This work presents the first systematic evaluation that jointly incorporates electromagnetic (EM) characteristics, such as mutual coupling and radiation efficiency, into the analysis of 3-D arrays under Clarke, Kronecker, and standardized 3rd Generation Partnership Project (3GPP) channel models. Analytical derivations and full-wave simulations demonstrate that 3-D architectures achieve higher EDOF, narrower beamwidths, and notable capacity improvements compared with planar baselines. In 3GPP urban macro channels with horizontal element spacing of 0.3 lambda, 3-D configurations yield approximately 20% capacity improvement over conventional 2-D arrays, confirming the robustness and scalability of volumetric designs under realistic conditions. These findings bridge the gap between theoretical feasibility and practical deployment, offering design guidance for next-generation 6G base station arrays.

eess.SP↗

arXiv2025

Quantum-inspired Beamforming Optimization for Quantized Phase-only Massive MIMO Arrays

This paper introduces an innovative quantum-inspired method for beamforming (BF) optimization in multiple-input multiple-output (MIMO) arrays. The method leverages the simulated bifurcation (SB) algorithm to address the complex combinatorial optimization problem due to the quantized phase configuration. We propose novel encoding techniques for high-bit phase quantization, which are then mapped into Ising spins. This enables efficient construction of the Hamiltonians and subsequent optimization of BF patterns. The results clearly demonstrate that the SB optimizer surpasses traditional schemes such as digital BF, holographic algorithms and genetic algorithms, offering faster convergence and higher solution quality. The impressive capability of the SB optimizer to handle complex BF scenarios, including sidelobe suppression and multiple beams with nulls, is undoubtedly demonstrated through several application cases. These findings strongly suggest that quantum-inspired methods have great potential to advance MIMO techniques in next-generation wireless communication.

physics.app-ph↗

arXiv2025

Capacity Enhancement Analysis and Implementation of a 3D Array Based on Miniaturized Dipole Antennas

Theoretically, the three-dimensional (3D) array architecture provides a higher communication degree of freedom (DoF) compared to the planar arrays, allowing for greater capacity potential in multiple-input multiple-output (MIMO) systems. However, in practical implementations, the upper elements of 3D arrays significantly degrade the performance of the lower elements, leading to increased inter-element correlation and reduced array efficiency. As a result, the expected enhancement in MIMO performance is often suboptimal. To address this issue, this work employs a miniaturized antenna element to reduce the inter-element correlation and thus enhance the DoF of the 3D array. Moreover, to mitigate the efficiency degradation of the lower elements caused by the upper ones, the structures of lower elements are modified to achieve wideband impedance matching. The influence of upper element profile distribution on DoF and element efficiency is investigated, and the scalability of the proposed 3D array is theoretically analyzed. Finally, the MIMO performance of the proposed 3D array is evaluated under 3GPP scenarios, demonstrating a 16% higher capacity than conventional 2D arrays under the same SNR of 20 dB and a physical aperture area of 6.26 λ02. These results indicate that 3D arrays of appropriately arranged miniaturized elements offer a promising approach to enhancing MIMO system performance.

physics.app-ph↗

arXiv2025

Electromagnetic Channel Modeling and Capacity Analysis for HMIMO Communications

Advancements in emerging technologies, e.g., reconfigurable intelligent surfaces and holographic MIMO (HMIMO), facilitate unprecedented manipulation of electromagnetic (EM) waves, significantly enhancing the performance of wireless communication systems. To accurately characterize the achievable performance limits of these systems, it is crucial to develop a universal EM-compliant channel model. This paper addresses this necessity by proposing a comprehensive EM channel model tailored for realistic multi-path environments, accounting for the combined effects of antenna array configurations and propagation conditions in HMIMO communications. Both polarization phenomena and spatial correlation are incorporated into this probabilistic channel model. Additionally, physical constraints of antenna configurations, such as mutual coupling effects and energy consumption, are integrated into the channel modeling framework. Simulation results validate the effectiveness of the proposed probabilistic channel model, indicating that traditional Rician and Rayleigh fading models cannot accurately depict the channel characteristics and underestimate the channel capacity. More importantly, the proposed channel model outperforms free-space Green's functions in accurately depicting both near-field gain and multi-path effects in radiative near-field regions. These gains are much more evident in tri-polarized systems, highlighting the necessity of polarization interference elimination techniques. Moreover, the theoretical analysis accurately verifies that capacity decreases with expanding communication regions of two-user communications.

cs.IT↗

arXiv2024

Electromagnetic Modeling and Capacity Analysis of Rydberg Atom-Based MIMO System

Rydberg atom-based antennas exploit the quantum properties of highly excited Rydberg atoms, providing unique advantages over classical antennas, such as high sensitivity, broad frequency range, and compact size. Despite the increasing interests in their applications in antenna and communication engineering, two key properties, involving the lack of polarization multiplexing and isotropic reception without mutual coupling, remain unexplored in the analysis of Rydberg atom-based spatial multiplexing, i.e., multiple-input and multiple-output (MIMO), communications. Generally, the design considerations for any antenna, even for atomic ones, can be extracted to factors such as radiation patterns, efficiency, and polarization, allowing them to be seamlessly integrated into existing system models. In this letter, we extract the antenna properties from relevant quantum characteristics, enabling electromagnetic modeling and capacity analysis of Rydberg MIMO systems in both far-field and near-field scenarios. By employing ray-based method for far-field analysis and dyadic Green's function for near-field calculation, our results indicate that Rydberg atom-based antenna arrays offer specific advantages over classical dipole-type arrays in single-polarization MIMO communications.

eess.SP↗

arXiv2024

Electromagnetic Normalization of Channel Matrix for Holographic MIMO Communications

Holographic multiple-input and multiple-output (MIMO) communications introduce innovative antenna array configurations, such as dense arrays and volumetric arrays, which offer notable advantages over conventional planar arrays with half-wavelength element spacing. However, accurately assessing the performance of these new holographic MIMO systems necessitates careful consideration of channel matrix normalization, as it is influenced by array gain, which, in turn, depends on the array topology. Traditional normalization methods may be insufficient for assessing these advanced array topologies, potentially resulting in misleading or inaccurate evaluations. In this study, we propose electromagnetic normalization approaches for the channel matrix that accommodate arbitrary array topologies, drawing on the array gains from analytical, physical, and full-wave methods. Additionally, we introduce a normalization method for near-field MIMO channels based on a rigorous dyadic Green's function approach, which accounts for potential losses of gain at near field. Finally, we perform capacity analyses under quasi-static, ergodic, and near-field conditions, through adopting the proposed normalization techniques. Our findings indicate that channel matrix normalization should reflect the realized gains of the antenna array in target directions. Failing to accurately normalize the channel matrix can result in errors when evaluating the performance limits and benefits of unconventional holographic array topologies, potentially compromising the optimal design of holographic MIMO systems.

eess.SP↗

arXiv2024

Breaking the Degrees-of-Freedom Limit of Holographic MIMO Communications: A 3-D Antenna Array Topology

The performance of holographic multiple-input multiple-output (MIMO) communications, employing two-dimensional (2-D) planar antenna arrays, is typically compromised by finite degrees-of-freedom (DOF) stemming from limited array size. The DOF constraint becomes significant when the element spacing approaches approximately half a wavelength, thereby restricting the overall performance of MIMO systems. To break this inherent limitation, we propose a novel three-dimensional (3-D) antenna array that strategically explores the untapped vertical dimension. We investigate the performance of MIMO systems utilizing 3-D arrays across different multi-path scenarios, encompassing Rayleigh channels with varying angular spreads and the 3rd generation partnership project (3GPP) channels. We subsequently showcase the advantages of these 3-D arrays over their 2-D counterparts with the same aperture sizes. As a proof of concept, a practical dipole-based 3-D array, facilitated by an electromagnetic band-gap (EBG) reflecting surface, is conceived, constructed, and evaluated. The experimental results align closely with full-wave simulations, and channel simulations substantiate that the DOF and capacity constraints of traditional holographic MIMO systems can be surpassed by adopting such a 3-D array configuration.

cs.IT↗

arXiv2023

Effects of Mutual Coupling on Degree of Freedom and Antenna Efficiency in Holographic MIMO Communications

The holographic multiple-input-multiple-output (MIMO) communications refer to the MIMO systems built with ultra-dense antenna arrays, whose channel models and potential applications have attracted increasing attentions recently. When the spacing between adjacent array elements is larger than half wavelength, the effect of mutual coupling can generally be neglected in current antenna designs. However, in holographic MIMO communications, the influence of strong mutual coupling on antenna characteristics is inevitable, resulting in distorted radiation patterns and low radiation efficiencies. In this paper, starting from the analytical correlation and efficiency models, we investigate how the mutual coupling affects the capacity of a space-constrained MIMO system from the aspects of degree of freedom (DOF) and antenna efficiency. The involved fundamental concepts of correlation, DOF, efficiency and mutual coupling are crucial for both antenna and wireless-communication engineers when designing emerging MIMO communication systems.

cs.IT↗

arXiv2022

Electromagnetic Effective-Degree-of-Freedom Limit of a MIMO System in 2-D Inhomogeneous Environment

Compared with a single-input-single-output (SISO) wireless communication system, the benefit of multiple-input-multiple-output (MIMO) technology originates from its extra degree of freedom (DOF), also referred as scattering channels or spatial electromagnetic (EM) modes, brought by spatial multiplexing. When the physical sizes of transmitting and receiving arrays are fixed, and there are sufficient antennas (typically with half-wavelength spacings), the DOF limit is only dependent on the propagating environment. Analytical methods can be used to estimate this limit in free space, and some approximate models are adopted in stochastic environments, such as Clarke's model and Ray-tracing methods. However, this DOF limit in an certain inhomogeneous environment has not been well discussed with rigorous full-wave numerical methods. In this work, volume integral equation (VIE) is implemented for investigating the limit of MIMO effective degree of freedom (EDOF) in three representative two-dimensional (2-D) inhomogeneous environments. Moreover, we clarify the relation between the performance of a MIMO system and the scattering characteristics of its propagating environment.

cs.IT↗

arXiv2022

Approaching the Fundamental Limit of Orbital Angular Momentum Multiplexing Through a Hologram Metasurface

Establishing and approaching the fundamental limit of orbital angular momentum (OAM) multiplexing are necessary and increasingly urgent for current multiple-input multiple-output research. In this work, we elaborate the fundamental limit in terms of independent scattering channels (or degrees of freedom of scattered fields) through angular-spectral analysis, in conjunction with a rigorous Green function method. The scattering channel limit is universal for arbitrary spatial mode multiplexing, which is launched by a planar electromagnetic device, such as antenna, metasurface, etc, with a predefined physical size. As a proof of concept, we demonstrate both theoretically and experimentally the limit by a metasurface hologram that transforms orthogonal OAM modes to plane-wave modes scattered at critically separated angular-spectral regions. Particularly, a minimax optimization algorithm is applied to suppress angular spectrum aliasing, achieving good performances in both full-wave simulation and experimental measurement at microwave frequencies. This work offers a theoretical upper bound and corresponding approach route for engineering designs of OAM multiplexing.

physics.app-ph↗

arXiv2022

Electromagnetic Effective Degree of Freedom of a MIMO System in Free Space

Effective degree of freedom (EDOF) of a multiple-input-multiple-output (MIMO) system represents its equivalent number of independent single-input-single-output (SISO) systems, which directly characterizes the communication performance. Traditional EDOF only considers single polarization, where the full polarized components degrade into two independent transverse components under the far-field approximation. However, the traditional model is not applicable to complex scenarios especially for the near-field region. Based on an electromagnetic (EM) channel model built from the dyadic Green's function, we first calculate the EM EDOF to estimate the performance of an arbitrary MIMO system with full polarizations in free space. Then, we clarify the relations between the limit of EDOF and the optimal number of sources/receivers. Finally, potential benefits of near-field MIMO communications are demonstrated with the EM EDOF, in which the contribution of the longitudinally polarized source is taken into account. This work establishes a fundamental EM framework for MIMO wireless communications.

cs.IT↗