arXiv subjects

Shuai Sun

Publications and source records attributed to Shuai Sun.

35 records · Page 2Linked to original sources

arXiv2020

Induced Homomorphism Kirchhoffs Law in Photonics

When solving, modelling or reasoning about complex problems, it is usually convenient to use the knowledge of a parallel physical system for representing it. This is the case of lumped-circuit abstraction, which can be used for representing mechanical and acoustic systems, thermal and heat-diffusion problems and in general partial differential equations. Integrated photonic platforms hold the prospect to perform signal processing and analog computing inherently, by mapping into hardware specific operations which relies on the wave-nature of their signals, without trusting on logic gates and digital states like electronics. Although, the distributed nature of photonic platforms leads to the absence of an equivalent approximation to Kirchhoffs law, the main principle used for representing physical systems using circuits. Here we argue that in absence of a straightforward parallelism and homomorphism can be induced. We introduce a photonic platform capable of mimicking Kirchhoffs law in photonics and used as node of a finite difference mesh for solving partial differential equation using monochromatic light in the telecommunication wavelength. We experimentally demonstrate generating in one-shot discrete solutions of a Laplace partial differential equation, with an accuracy above 95% relative to commercial solvers, for an arbitrary set of boundary conditions. Our photonic engine can provide a route to achieve chip-scale, fast (10s of ps), and integrable reprogrammable accelerators for the next generation hybrid high performance computing.

physics.optics↗

arXiv2020

FedCoin: A Peer-to-Peer Payment System for Federated Learning

Federated learning (FL) is an emerging collaborative machine learning method to train models on distributed datasets with privacy concerns. To properly incentivize data owners to contribute their efforts, Shapley Value (SV) is often adopted to fairly assess their contribution. However, the calculation of SV is time-consuming and computationally costly. In this paper, we propose FedCoin, a blockchain-based peer-to-peer payment system for FL to enable a feasible SV based profit distribution. In FedCoin, blockchain consensus entities calculate SVs and a new block is created based on the proof of Shapley (PoSap) protocol. It is in contrast to the popular BitCoin network where consensus entities "mine" new blocks by solving meaningless puzzles. Based on the computed SVs, a scheme for dividing the incentive payoffs among FL clients with nonrepudiation and tamper-resistance properties is proposed. Experimental results based on real-world data show that FedCoin can promote high-quality data from FL clients through accurately computing SVs with an upper bound on the computational resources required for reaching consensus. It opens opportunities for non-data owners to play a role in FL.

cs.CR↗

arXiv2019

ITO-based Electro-absorption Modulator for Photonic Neural Activation Function

Recently integrated optics has become an intriguing platform for implementing machine learning algorithms and inparticular neural networks. Integrated photonic circuits can straightforwardly perform vector-matrix multiplicationswith high efficiency and low power consumption by using weighting mechanism through linear optics. Although,this can not be said for the activation function which requires either nonlinear optics or an electro-optic module withan appropriate dynamic range. Even though all-optical nonlinear optics is potentially faster, its current integrationis challenging and is rather inefficient. Here we demonstrate an electro-absorption modulator based on an IndiumTin Oxide layer, whose dynamic range is used as nonlinear activation function of a photonic neuron. The nonlinearactivation mechanism is based on a photodiode, which integrates the weighed products, and whose photovoltage drivesthe elecro-absorption modulator. The synapse and neuron circuit is then constructed to execute a 200-node MNISTclassification neural network used for benchmarking the nonlinear activation function and compared with an equivalentelectronic module.

physics.app-ph↗

arXiv2019

Coupling-enhanced Dual ITO Layer Electro-absorption Modulator in Silicon Photonics

Electro-optic signal modulation provides a key functionality in modern technology and information networks. Photonic integration has enabled not only miniaturizing photonic components, but also provided performance improvements due to co-design addressing both electrical and optical device rules. However, the millimeter-to-centimeter large footprint of many foundry-ready photonic electro-optic modulators significantly limits on-chip scaling density. To address these limitations, here we experimentally demonstrate a coupling-enhanced electro-absorption modulator by heterogeneously integrating a novel dual-gated indium-tin-oxide (ITO) phase-shifting tunable absorber placed at a silicon directional coupler region. Our experimental modulator shows a 2 dB extinction ratio for a just 4 um short device at 4 volt bias. Since no material nor optical resonances are deployed, this device shows spectrally broadband operation as demonstrated here across the entire C-band. In conclusion we demonstrate a modulator utilizing strong index-change from both real and imaginary part of active material enabling compact and high-performing modulators using semiconductor foundry-near materials.

physics.app-ph↗

arXiv2019

Towards integrated metatronics: a holistic approach on precise optical and electrical properties of Indium Tin Oxide

The class of transparent conductive oxides includes the material indium tin oxide (ITO) and has become a widely used material of modern every-day life such as in touch screens of smart phones and watches, but also used as an optically transparent low electrically-resistive contract in the photovoltaics industry. More recently ITO has shown epsilon-near-zero (ENZ) behavior in the telecommunication frequency band enabling both strong index modulation and other optically-exotic applications such as metatronics. However the ability to precisely obtain targeted electrical and optical material properties in ITO is still challenging due to complex intrinsic effects in ITO and as such no integrated metatronic platform has been demonstrated to-date. Here we deliver an extensive and accurate description process parameters of RF-sputtering, showing a holistic control of the quality of ITO thin films in the visible and particularly near-infrared spectral region. We further are able to custom-engineer the ENZ point across the telecommunication band by explicitly controlling the sputtering process conditions. Exploiting this control we design a functional sub-wavelength-scale filter based on lumped circuit-elements, towards the realization of integrated metatronic devices and circuits.

physics.app-ph↗

arXiv2018

Coupling-controlled Dual ITO Layer Electro-Optic Modulator in Silicon Photonics

Electro-optic signal modulation provides a key functionality in modern technology and information networks. Photonic integration has enabled not only miniaturizing photonic components, but also provided performance improvements due to co-design addressing both electrical and optical device rules. However the millimeter-to-centimeter large footprint of many foundry-ready photonic electro-optic modulators significantly limits scaling density. Furthermore, modulators bear a fundamental a frequency-response to energy-sensitive trade-off, a limitation that can be overcome with coupling-based modulators where the temporal response speed is decoupled from the optical cavity photo lifetime. Thus, the coupling effect to the resonator is modulated rather then tuning the index of the resonator itself. However, the weak electro-optic response of silicon limits such coupling modulator performance, since the micrometer-short overlap region of the waveguide-bus and a microring resonator is insufficient to induce signal modulation. To address these limitations, here we demonstrate a coupling-controlled electro-optic modulator by heterogeneously integrating a dual-gated indium-tin-oxide (ITO) phase shifter placed at the silicon microring-bus coupler region. Our experimental modulator shows about 4 dB extinction ratio on resonance, and a about 1.5 dB off resonance with a low insertion loss of 0.15 dB for a just 4 μm short device demonstrating a compact high 10:1 modulation-to-loss ratio. In conclusion we demonstrate a coupling modulator using strongly index-changeable materials enabling compact and high-performing modulators using semiconductor foundry-near materials.

physics.app-ph↗

arXiv2018

Joint Target Detection and Tracking in Multipath Environment: A Variational Bayesian Approach

We consider multitarget detection and tracking problem for a class of multipath detection system where one target may generate multiple measurements via multiple propagation paths, and the association relationship among targets, measurements and propagation paths is unknown. In order to effectively utilize multipath measurements from one target to improve detection and tracking performance, a tracker has to handle high-dimensional estimation of latent variables including target active/dormant meta-state, target kinematic state, and multipath data association. Based on variational Bayesian inference, we propose a novel joint detection and tracking algorithm that incorporates multipath data association, target detection and target state estimation in a unified Bayesian framework. The posterior probabilities of these latent variables are derived in a closed-form iterative manner, which is effective for reducing the performance deterioration caused by the coupling between estimation errors and identification errors. Loopy belief propagation is exploited to approximately calculate the probability of multipath data association, saving the computational cost significantly. Simulation results of over-the-horizon radar multitarget tracking show that the proposed algorithm outperforms multihypothesis multipath track fusion and multi-detection (hypothesis-oriented) multiple hypothesis tracker, especially under low signal-to-noise ratio circumstance.

cs.CV↗

arXiv2018

Compact Graphene Plasmonic Slot Photodetector on Silicon-on-insulator with High Responsivity

Graphene has extraordinary electro-optic properties and is therefore a promising candidate for monolithic photonic devices such as photodetectors. However, the integration of this atom-thin layer material with bulky photonic components usually results in a weak light-graphene interaction leading to large device lengths limiting electro-optic performance. In contrast, here we demonstrate a plasmonic slot graphene photodetector on silicon-on-insulator platform with high-responsivity given the 5 um-short device length. We observe that the maximum photocurrent, and hence the highest responsivity, scales inversely with the slot gap width. Using a dual-lithography step, we realize 15 nm narrow slots that show a 15-times higher responsivity per unit device-length compared to photonic graphene photodetectors. Furthermore, we reveal that the back-gated electrostatics is overshadowed by channel-doping contributions induced by the contacts of this ultra-short channel graphene photodetector. This leads to quasi charge neutrality, which explains both the previously-unseen offset between the maximum photovoltaic-based photocurrent relative to graphenes Dirac point and the observed non-ambipolar transport. Such micrometer compact and absorption-efficient photodetectors allow for short-carrier pathways in next-generation photonic components, while being an ideal testbed to study short-channel carrier physics in graphene optoelectronics.

physics.app-ph↗

arXiv2017

Integrated Nanophotonics Architecture for Residue Number System Arithmetic

Residue number system (RNS) enables dimensionality reduction of an arithmetic problem by representing a large number as a set of smaller integers, where the number is decomposed by prime number factorization using the moduli as basic functions. These reduced problem sets can then be processed independently and in parallel, thus improving computational efficiency and speed. Here we show an optical RNS hardware representation based on integrated nanophotonics. The digit-wise shifting in RNS arithmetic is expressed as spatial routing of an optical signal in 2x2 hybrid photonic-plasmonic switches. Here the residue is represented by spatially shifting the input waveguides relative to the routers outputs, where the moduli are represented by the number of waveguides. By cascading the photonic 2x2 switches, we design a photonic RNS adder and a multiplier forming an all-to-all sparse directional network. The advantage of this photonic arithmetic processor is the short (10's ps) computational execution time given by the optical propagation delay through the integrated nanophotonic router. Furthermore, we show how photonic processing in-the-network leverages the natural parallelism of optics such as wavelength-division-multiplexing or optical angular momentum in this RNS processor. A key application for photonic RNS is the functional analysis convolution with widespread usage in numerical linear algebra, computer vision, language- image- and signal processing, and neural networks.

cs.ET↗

arXiv2017

Hybrid Photonic-Plasmonic Non-blocking Broadband 5x5 Router for Optical Networks

Photonic data routing in optical networks overcomes the limitations of electronic routers with respect to data rate, latency, and energy consumption while suffering from dynamic power consumption, non-simultaneous usage of multiple wavelength channels, and large footprints. Here we show the first hybrid photonic-plasmonic, non-blocking, broadband 5x5 router. The compact footprint (<250 μm2) enables high operation speed (480 GHz) requiring only 82 fJ/bit (1.9 dB) of averaged energy consumption (routing loss). The router supports multi-wavelength up to 206 nm in the telecom band. Having a data-capacity of >70 Tbps, thus demonstrating key features required by future high data-throughput optical networks.

physics.app-ph↗

arXiv2017

MODetector (MOD): A Dual-Functional Optical Modulator-Detector for On-Chip Communication

Physical challenges at the device and interconnect level limit both network and computing energy efficiency. While photonics is being considered to address interconnect bottlenecks, optical routing is still limited by electronic circuitry, requiring substantial overhead for optical-electrical-optical conversion. Here we show a novel design of an integrated broadband photonic-plasmonic hybrid device termed MODetector featuring dual light modulation and detection function to act as an optical transceiver in the photonic network-on-chip. With over 10 dB extinction ratio and 0.8 dB insertion loss at the modulation state, this MODetector provides 0.7 W/A responsivity in the detection state with 36 ps response time. This multi-functional device: (i) eliminates OEO conversion, (ii) reduces optical losses from photodetectors when not needed, and (iii) enables cognitive routing strategies for network-on-chips.

physics.app-ph↗

arXiv2017

Plasmonic Optical Modulator based on Adiabatic Coupled Waveguides

In atomic multi-level systems, adiabatic elimination is a method used to minimize complicity of the system by eliminating irrelevant and strongly coupled levels by detuning them from one-another. Such a three-level system, for instance, can be mapped onto physical in form of a three-waveguide system. Actively detuning the coupling strength between the respective waveguide modes allows modulating light propagating through the device, as proposed here. The outer waveguides act as an effective two- photonic-mode system similar to ground- and excited states of a three-level atomic system, whilst the center waveguide is partially plasmonic. In adiabatic elimination regime, the amplitude of the middle waveguide oscillates much faster in comparison to the outer waveguides leading to a vanishing field build up. As a result, the middle waveguide becomes a dark state and hence a low insertion-loss of 8 decibel is expected to keep when achieving the modulation depth as high as 70 decibel despite the involvement of a plasmonic waveguide in the design presented here. The modulation mechanism relies on switching this waveguide system from a critical coupling regime to adiabatic elimination condition via electrostatically tuning the free-carrier concentration and hence the optical index of a thin ITO layer residing in the plasmonic center waveguide. This alters the effective coupling length and the phase mismatching condition thus modulation in each of outer waveguides. Our results show a modulator energy efficiency as low as 40 atto-joule per bit and an extinction ratio of 50 decibel. Given the minuscule footprint of the modulator, the resulting lumped-element limited RC delay is expected to exceed 200 giga hertz. This type of modulator paves the way for next-generation both energy-and speed conscience optical short-reach interconnects.

physics.optics↗

arXiv2017

D3NOC: Dynamic Data-Driven Network On Chip in Photonic Electronic Hybrids

In this paper, we present a reconfigurable hybrid Photonic-Plasmonic Network-on-Chip (NoC) based on the Dynamic Data Driven Application System (DDDAS) paradigm. In DDDAS computations and measurements form a dynamic closed feedback loop in which they tune one another in response to changes in the environment. Our proposed system enables dynamic augmentation of a base electrical mesh topology with an optical express bus during the run-time. In addition, the measurement process itself adjusts to the environment. In order to achieve lower latencies, lower dynamic power, and higher throughput, we take advantage of a Configurable Hybrid Photonic Plasmonic Interconnect (CHyPPI) for our reconfigurable connections. We evaluate the performance and power of our system against kernels from NAS Parallel Benchmark (NPB) in addition to some synthetically generated traffic. In comparison to a 16x16 base electrical mesh, D3NOC shows up to 89% latency and 67% dynamic power net improvements beyond overhead-corrected performance. It should be noted that the design-space of NoC reconfiguration is vast and the goal of this study is not design-space exploration. Our goal is to show the potentials of adaptive dynamic measurements when coupled with other reconfiguration techniques in the NoC context.

cs.OH↗

arXiv2017

MorphoNoC: Exploring the Design Space of a Configurable Hybrid NoC using Nanophotonics

As diminishing feature sizes drive down the energy for computations, the power budget for on-chip communication is steadily rising. Furthermore, the increasing number of cores is placing a huge performance burden on the network-on-chip (NoC) infrastructure. While NoCs are designed as regular architectures that allow scaling to hundreds of cores, the lack of a flexible topology gives rise to higher latencies, lower throughput, and increased energy costs. In this paper, we explore MorphoNoCs - scalable, configurable, hybrid NoCs obtained by extending regular electrical networks with configurable nanophotonic links. In order to design MorphoNoCs, we first carry out a detailed study of the design space for Multi-Write Multi-Read (MWMR) nanophotonics links. After identifying optimum design points, we then discuss the router architecture for deploying them in hybrid electronic-photonic NoCs. We then study explore the design space at the network level, by varying the waveguide lengths and the number of hybrid routers. This affords us to carry out energy-latency trade-offs. For our evaluations, we adopt traces from synthetic benchmarks as well as the NAS Parallel Benchmark suite. Our results indicate that MorphoNoCs can achieve latency improvements of up to 3.0x or energy improvements of up to 1.37x over the base electronic network.

cs.OH↗

arXiv2017

HyPPI NoC: Bringing Hybrid Plasmonics to an Opto-Electronic Network-on-Chip

As we move towards an era of hundreds of cores, the research community has witnessed the emergence of opto-electronic network on-chip designs based on nanophotonics, in order to achieve higher network throughput, lower latencies, and lower dynamic power. However, traditional nanophotonics options face limitations such as large device footprints compared with electronics, higher static power due to continuous laser operation, and an upper limit on achievable data rates due to large device capacitances. Nanoplasmonics is an emerging technology that has the potential for providing transformative gains on multiple metrics due to its potential to increase the light-matter interaction. In this paper, we propose and analyze a hybrid opto-electric NoC that incorporates Hybrid Plasmonics Photonics Interconnect (HyPPI), an optical interconnect that combines photonics with plasmonics. We explore various opto-electronic network hybridization options by augmenting a mesh network with HyPPI links, and compare them with the equivalent options afforded by conventional nanophotonics as well as pure electronics. Our design space exploration indicates that augmenting an electronic NoC with HyPPI gives a performance to cost ratio improvement of up to 1.8x. To further validate our estimates, we conduct trace based simulations using the NAS Parallel Benchmark suite. These benchmarks show latency improvements up to 1.64x, with negligible energy increase. We then further carry out performance and cost projections for fully optical NoCs, using HyPPI as well as conventional nanophotonics. These futuristic projections indicate that all-HyPPI NoCs would be two orders more energy efficient than electronics, and two orders more area efficient than all-photonic NoCs.

cs.ET↗

arXiv2016

Moore's Law in CLEAR Light

The inability of Moore's Law and other figure-of-merits (FOMs) to accurately explain the technology development of the semiconductor industry demands a holistic merit to guide the industry. Here we introduce a FOM termed CLEAR that accurately postdicts technology developments since the 1940's until today, and predicts photonics as a logical extension to keep-up the pace of information-handling machines. We show that CLEAR (Capability-to-Latency-Energy-Amount-Resistance) is multi-hierarchical applying to the device, interconnect, and system level. Being a holistic FOM, we show that empirical trends such as Moore's Law and the Makimoto's wave are special cases of the universal CLEAR merit. Looking ahead, photonic board- and chip-level technologies are able to continue the observed doubling rate of the CLEAR value every 12 months, while electronic technologies are unable to keep pace.

cs.ET↗

arXiv2016

A Universal Multi-Hierarchy Figure-of-Merit for On-Chip Computing and Communications

Continuing demands for increased compute efficiency and communication bandwidth have led to the development of novel interconnect technologies with the potential to outperform conventional electrical interconnects. With a plurality of interconnect technologies to include electronics, photonics, plasmonics, and hybrids thereof, the simple approach of counting on-chip devices to capture performance is insufficient. While some efforts have been made to capture the performance evolution more accurately, they eventually deviate from the observed development pace. Thus, a holistic figure of merit (FOM) is needed to adequately compare these recent technology paradigms. Here we introduce the Capability-to-Latency-Energy-Amount-Resistance (CLEAR) FOM derived from device and link performance criteria of both active optoelectronic devices and passive components alike. As such CLEAR incorporates communication delay, energy efficiency, on-chip scaling and economic cost. We show that CLEAR accurately describes compute development including most recent machines. Since this FOM is derived bottom-up, we demonstrate remarkable adaptability to applications ranging from device-level to network and system-level. Applying CLEAR to benchmark device, link, and network performance against fundamental physical compute and communication limits shows that photonics is competitive even for fractions of the die-size, thus making a case for on-chip optical interconnects.

cs.ET↗