SearcharxivSearch

arXiv subjects

Shuwei Zhou

Publications and source records attributed to Shuwei Zhou.

11 recordsLinked to original sources

A Variational Kolosov--Muskhelishvili Network for Elasticity and Fracture

Physics-informed neural networks provide a mesh-free framework for solving partial differential equation-governed problems in solid mechanics. However, most existing formulations in linear elasticity still learn the displacement field directly, which does not explicitly exploit the analytic structure of two-dimensional elasticity and becomes restrictive for fracture problems with crack face discontinuities and crack tip singularities. Moreover, existing Kolosov--Muskhelishvili informed neural network formulations still rely on residual-based loss functions with multiple boundary and interface terms, whereas a variational concept has not yet been established. To address these issues, a variational Kolosov--Muskhelishvili informed neural network framework for two-dimensional linear elastic problems with and without cracks is proposed in this work. The solution is represented by two holomorphic Kolosov--Muskhelishvili potentials and trained through an energy-based loss function derived from the principle of minimum total potential energy. For crack problems, a discontinuous stress potential representation is further introduced to embed the crack face condition and crack tip singularity directly into the solution ansatz. The proposed framework is validated on a series of benchmark problems with or without crack problems. The results show that variational Kolosov--Muskhelishvili informed neural network can accurately predict stress and displacement field as well as stress intensity factors. Compared with traditional neural network models, it achieves higher accuracy, simpler loss construction, and faster convergence in the considered cases. Overall, the proposed variational Kolosov--Muskhelishvili informed neural network provides an effective and physically consistent variational framework for two-dimensional linear elastic fracture analysis.

cs.CE

Transfer-learned Kolosov-Muskhelishvili Informed Neural Networks for Fracture Mechanics

Physics-informed neural networks have been widely applied to solid mechanics problems. However, balancing the governing partial differential equations and boundary conditions remains challenging, particularly in fracture mechanics, where accurate predictions strongly depend on refined sampling near crack tips. To overcome these limitations, a Kolosov-Muskhelishvili informed neural network with Williams enrichment is developed in this study. Benefiting from the holomorphic representation, the governing equations are satisfied by construction, and only boundary points are required for training. Across a series of benchmark problems, the Kolosov-Muskhelishvili informed neural network shows excellent agreement with analytical and finite element method references, achieving average relative errors below 1\% and $R^2$ above 0.99 for both mode I and mode II loadings. Furthermore, three crack propagation criteria (maximum tangential stress, maximum energy release rate, and principle of local symmetry) are integrated into the framework using a transfer learning strategy to predict crack propagation directions. The predicted paths are nearly identical across all criteria, and the transfer learning strategy reduces the required training time by more than 70\%. Overall, the developed framework provides a unified, mesh-free, and physically consistent approach for accurate and efficient crack propagation analysis.

cs.CE

Phase field modeling of hydraulic fracture propagation in transversely isotropic poroelastic media

This paper proposes a phase field model (PFM) for describing hydraulic fracture propagation in transversely isotopic media. The coupling between the fluid flow and displacement fields is established according to the classical Biot poroelasticity theory while the phase field model characterizes the fracture behavior. The proposed method uses a transversely isotropic constitutive relationship between stress and strain as well as anisotropy in fracture toughness and permeability. An additional pressure-related term and an anisotropic fracture toughness tensor are added in the energy functional, which is then used to obtain the governing equations of strong form via the variational approach. In addition, the phase field is used to construct indicator functions that transit the fluid property from the intact domain to the fully fractured one. Moreover, the proposed PFM is implemented using the finite element method where a staggered scheme is applied and the displacement and fluid pressure are monolithically solved in a staggered step. Afterwards, two examples are tested to initially verify the proposed PFM: a transversely isotropic single-edge-notched square plate subjected to tension and an isotropic porous medium subjected to internal fluid pressure. Finally, numerical examples of 2D and 3D transversely isotropic media with one or two interior notches subjected to internal fluid pressure are presented to further prove the capability of the proposed PFM in 2D and 3D problems.

physics.geo-ph

On the hydraulic fracturing in naturally-layered porous media using the phase field method

In the hydraulic fracturing of natural rocks, understanding and predicting crack penetrations into the neighboring layers is crucial and relevant in terms of cost-efficiency in engineering and environmental protection. This study constitutes a phase field framework to examine hydraulic fracture propagation in naturally-layered porous media. Biot's poroelasticity theory is used to couple the displacement and flow field, while a phase field method helps characterize fracture growth behavior. Additional fracture criteria are not required and fracture propagation is governed by the equation of phase field evolution. Thus, penetration criteria are not required when hydraulic fractures reach the material interfaces. The phase field method is implemented within a staggered scheme that sequentially solves the displacement, phase field, and fluid pressure. We consider the soft-to-stiff and the stiff-to-soft configurations, where the layer interface exhibits different inclination angles $θ$. Penetration, singly-deflected, and doubly-deflected fracture scenarios can be predicted by our simulations. In the soft-to-stiff configuration, $θ=0^\circ$ exhibits penetration or symmetrical doubly-deflected scenarios, and $θ=15^\circ$ exhibits singly-deflected or asymmetric doubly-deflected scenarios. Only the singly-deflected scenario is obtained for $θ=30^\circ$. In the stiff-to-soft configuration, only the penetration scenario is obtained with widening fractures when hydraulic fractures penetrate into the soft layer.

physics.geo-ph

Phase-field modeling of fluid-driven dynamic cracking in porous media

A phase field model for fluid-driven dynamic crack propagation in poroelastic media is proposed. Therefore, classical Biot poroelasticity theory is applied in the porous medium while arbitrary crack growth is naturally captured by the phase field model. We also account for the transition of the fluid property from the intact medium to the fully broken one by employing indicator functions. We employ a staggered scheme and implement our approach into the software package COMSOL Multiphysics. Our approach is first verified through three classical benchmark problems which are compared to analytical solutions for dynamic consolidation and pressure distribution in a single crack and in a specimen with two sets of joints. Subsequently, we present several 2D and 3D examples of dynamic crack branching and their interaction with pre-existing natural fractures. All presented examples demonstrate the capability of the proposed approach of handling dynamic crack propagation, branching and coalescence of fluid-driven fracture.

math.NA

Phase field modeling of brittle compressive-shear fractures in rock-like materials: A new driving force and a hybrid formulation

Compressive-shear fracture is commonly observed in rock-like materials. However, this fracture type cannot be captured by current phase field models (PFMs), which have been proven an effective tool for modeling fracture initiation, propagation, coalescence, and branching in solids. The existing PFMs also cannot describe the influence of cohesion and internal friction angle on load-displacement curve during compression tests. Therefore, to develop a new phase field model that can simulate well compressive-shear fractures in rock-like materials, we construct a new driving force in the evolution equation of phase field. Strain spectral decomposition is applied and only the compressive part of the strain is used in the new driving force with consideration of the influence of cohesion and internal friction angle. For ease of implementation, a hybrid formulation is established for the phase field modeling. Then, we test the brittle compressive-shear fractures in uniaxial compression tests on intact rock-like specimens as well as those with a single or two parallel inclined flaws. All numerical results are in good agreement with the experimental observation, validating the feasibility and practicability of the proposed PFM for simulating brittle compressive-shear fractures.

cs.CE

Phase field method for quasi-static hydro-fracture in porous media under stress boundary condition considering the effect of initial stress field

Phase field model (PFM) is an efficient fracture modeling method and has high potential for hydraulic fracturing (HF). However, the current PFMs in HF do not consider well the effect of in-situ stress field and the numerical examples of porous media with stress boundary conditions were rarely presented. The main reason is that if the remote stress is applied on the boundaries of the calculation domain, there will be relatively large deformation induced on these stress boundaries, which is not consistent with the engineering observations. To eliminate this limitation, this paper proposes a new phase field method to describe quasi-static hydraulic fracture propagation in porous media subjected to stress boundary conditions, and the new method is more in line with engineering practice. A new energy functional, which considers the effect of initial in-situ stress field, is established and then it is used to achieve the governing equations for the displacement and phase fields through the variational approach. Biot poroelasticity theory is used to couple the fluid pressure field and the displacement field while the phase field is used for determining the fluid properties from the intact domain to the fully broken domain. In addition, we present several 2D and 3D examples to show the effects of in-situ stress on hydraulic fracture propagation. The numerical examples indicate that under stress boundary condition our approach obtains correct displacement distribution and it is capable of capturing complex hydraulic fracture growth patterns.

cs.CE

Phase Field Characterization of Rock Fractures in Brazilian Splitting Test Specimens Containing Voids and Inclusions

The Brazilian splitting test is a widely used testing procedure for characterizing the tensile strength of natural rock or rock-like material due to the fact. However, the results of Brazilian tests on specimens with naturally existing voids and inclusions are strongly influenced by size effects and boundary conditions, while numerical modeling can assist in explaining and understanding the mechanisms. On the other hand, the potential of utilizing Brazilian test to characterize inhomogeneous deformation of rock samples with voids and inclusions of dissimilar materials still awaits to be explored. In the present study, fracture mechanisms in Brazilian discs with circular voids and filled inclusions are investigated by using the phase field model (PFM). The PFM is implemented within the framework of finite element method to study the influence of diameter, eccentricity, and quantity of the voids and inclusions on the fracture patterns and stress-strain curves. The phase field simulations can reproduce previous experimental phenomena and furthermore it deepens the understanding of the influence of inclusion and voids on the fracture pattern, overall strength and deformation behavior of inhomogeneous rock. The findings in the study highlight the potential of characterizing inhomogeneous rock through combining Brazilian tests and numerical modeling.

physics.geo-ph

Phase field modeling of quasi-static and dynamic crack propagation: COMSOL implementation and case studies

The phase-field model (PFM) represents the crack geometry in a diffusive way without introducing sharp discontinuities. This feature enables PFM to effectively model crack propagation compared with numerical methods based on discrete crack model, especially for complex crack patterns. Due to the involvement of \phased field", phase-field method can be essentially treated a multifield problem even for pure mechanical problem. Therefore, it is supposed that the implementation of PFM based on a software developer that especially supports the solution of multifield problems should be more effective, simpler and more efficient than PFM implemented on a general finite element software. In this work, the authors aim to devise a simple and efficient implementation of phase-field model for the modelling of quasi-static and dynamic fracture in the general purpose commercial software developer, COMSOL Multiphysics. Notably only the tensile stress induced crack is accounted for crack evolution by using the decomposition of elastic strain energy. The width of the diffusive crack is controlled by a length-scale parameter. Equations that govern body motion and phase-field evolution are written into different modules in COMSOL, which are then coupled to a whole system to be solved. A staggered scheme is adopted to solve the coupled system and each module is solved sequentially during one time step. A number of 2D and 3D examples are tested to investigate the performance of the present implementation. Our simulations show good agreement with previous works, indicating the feasibility and validity of the COMSOL implementation of PFM.

cs.CE

A phase-field modeling approach of fracture propagation in poroelastic media

This paper proposes a phase field model for fracture in poroelastic media. The porous medium is modeled based on the classical Biot poroelasticity theory and the fracture behavior is controlled by the phase field model. Moreover, the fracture propagation is driven by the elastic energy where the phase field is used as an interpolation function to transit fluid property from the intact medium to the fully broken one. We use a segregated (staggered) scheme and implement our approach in Comsol Multiphysics. The proposed model is verified by a single-phase solid subjected to tension and a 2D specimen subjected to an increasing internal pressure. We also compare our results with analytical solutions. Finally, we show 2D and 3D examples of internal fluid injection to illustrate the capability of the proposed approach.

physics.geo-ph

Phase field modelling of crack propagation, branching and coalescence in rocks

We present a phase field model (PFM) for simulating complex crack patterns including crack propagation, branching and coalescence in rock. The phase field model is implemented in COMSOL and is based on the strain decomposition for the elastic energy, which drives the evolution of the phase field. Then, numerical simulations of notched semi-circular bend (NSCB) tests and Brazil splitting tests are performed. Subsequently, crack propagation and coalescence in rock plates with multiple echelon flaws and twenty parallel flaws are studied. Finally, complex crack patterns are presented for a plate subjected to increasing internal pressure, the (3D) Pertersson beam and a 3D NSCB test. All results are in good agreement with previous experimental and numerical results.

cond-mat.soft