arXiv subjects

Shyam Katnagallu

Publications and source records attributed to Shyam Katnagallu.

12 recordsLinked to original sources

arXiv2026

Conditional spinodal decomposition in Li-Mg anodes for lithium metal batteries

The development of batteries with high energy density, short charging times and use of sustainable materials is critical for decarbonization. Magnesium (Mg)-based anodes for lithium (Li) metal batteries promote homogeneous Li plating, thereby avoiding the formation of Li dendrites that cause short circuits and battery failure. However, microstructural modifications induced by Li-alloying and their influence on battery operation remain elusive. Here, we unveil the previously unknown formation of an ordered B2 phase, which creates a conditional spinodal decomposition with the \b{eta}-body-centered cubic phase. Chemical fluctuations characteristic of spinodal decomposition give rise to uniformly dispersed Li-rich \b{eta}-BCC and Li-poor B2 continuous interconnected phases, with the former providing a fast diffusion pathway for Li diffusion towards the anode, hence decreasing the propensity for dendrite formation at elevated current density. This is achieved using Earth-abundant and inexpensive Mg.

cond-mat.mtrl-sci↗

arXiv2025

Domain Boundaries in a Metallic Distortive Polar Metal

Polar metals are an underexplored material class combining two properties that are typically incompatible, namely a polar crystal structure and reasonable electrical conductivity. These intriguing materials offer a unique combination of properties, potentially relevant to optoelectronics, catalysis, memory devices, among other applications. The distortive polar metal (DPM) subclass forms through a symmetry-lifting phase transformation into a non-centrosymmetric polar crystal structure. In the process, domains with uniform geometric polar directions form, oftentimes separated by domain boundaries with polarity discontinuities arranged in "charged" head-to-head (H-H) or tail-to-tail (T-T) morphologies. To date, only metallic oxide DPM microstructures have been studied. Here we reveal, in the intermetallic DPM Mn$_{5}$Al$_{8}$, different surface interactions and electron transfer reactivity at domain boundaries depending on their H-H or T-T character. Variable surface reactivity suggests localized changes in electronic work functions due to an increase (H-H) or decrease (T-T) in the electronic density of states. These findings suggest that metallic DPMs may offer functionalizable domain boundaries and deserve increased attention, given that they allow tunable chemistries and various thermomechanical processing or transformation protocols. Ultimately, this study proposes unconventional metal physics, propelling the discovery and design of advanced electronic materials and devices.

cond-mat.mtrl-sci↗

arXiv2025

Electric Field-Induced Formation of a 2D Adatom Gas on Cryogenic Li Surfaces

Intense electrostatic fields, such as those able to break bonds and cause field-ion emission, can fundamentally alter the behaviour of atoms at and on the surface. Using density functional theory (DFT) calculations on the Li (110) surface under high electrostatic fields, we identify a critical field strength at which surface atoms occupying a kink site become thermodynamically unstable against adatom formation. This mechanism leads to the formation of a highly concentrated two-dimensional (2D) adatom gas on the surface. Moreover, the applied field reverses the stability of preferred adsorption sites, enabling barrierless diffusion of lithium atoms even well below the threshold required for field evaporation. The here identified mechanisms offer a unified explanation for experimental observations in atom probe tomography and for understanding high electric field phenomena in systems such as battery interfaces and electrochemical environments.

cond-mat.mtrl-sci↗

arXiv2024

Understanding atom probe's analytical performance for iron oxides using correlation histograms and ab initio calculations

Field evaporation from ionic or covalently bonded materials often leads to the emission of molecular ions. The metastability of these molecular ions, particularly under the influence of the intense electrostatic field (1010 Vm-1), makes them prone to dissociation with or without an exchange of energy amongst them. These processes can affect the analytical performance of atom probe tomography (APT). For instance, neutral species formed through dissociation may not be detected at all or with a time of flight no longer related to their mass, causing their loss from the analysis. Here, we evaluated the changes in the measured composition of FeO, Fe2O3 and Fe3O4 across a wide range of analysis conditions. Possible dissociation reactions are predicted by density-functional theory (DFT) calculations considering the spin states of the molecules. The energetically favoured reactions are traced on to the multi-hit ion correlation histograms, to confirm their existence within experiments, using an automated Python-based routine. The detected reactions are carefully analysed to reflect upon the influence of these neutrals from dissociation reactions on the performance of APT for analysing iron oxides.

cond-mat.mtrl-sci↗

arXiv2023

Accurate computation of chemical contrast in field ion microscopy

We present a computational approach to simulate local contrast observed in Field Ion Microscopy (FIM). It is based on density-functional theory utilizing the Tersoff-Hamann approach as done in Scanning Tunneling Microscopy (STM). A key requirement is the highly accurate computation of the surface states' wave-function tails. To refine the Kohn-Sham states from standard iterative global solvers we introduce and discuss the EXtrapolation of Tails via Reverse integration Algorithm (EXTRA). The decaying tails are obtained by reverse integration (from outside in) using a Numerov-like algorithm. The starting conditions are then iteratively adapted to match the values of plane-wave Kohn-Sham wave functions close to the surface. We demonstrate the performance of the proposed algorithm by analysing and showing the chemical contrast for Ta at Ni surface.

cond-mat.mtrl-sci↗

arXiv2023

A machine learning framework for quantifying chemical segregation and microstructural features in atom probe tomography data

Atom probe tomography (APT) is ideally suited to characterize and understand the interplay of chemical segregation and microstructure in modern multicomponent materials. Yet, the quantitative analysis typically relies on human expertise to define regions of interest. We introduce a computationally efficient, multistage machine learning strategy to identify chemically distinct domains in a semi automated way, and subsequently quantify their geometric and compositional characteristics. In our algorithmic pipeline, we first coarse grain the APT data into voxels, collect the composition statistics, and decompose it via clustering in composition space. The composition classification then enables the real space segmentation via a density based clustering algorithm, thus revealing the microstructure at voxel resolution. Our approach is demonstrated for a Sm(Co,Fe)ZrCu alloy. The alloy exhibits two precipitate phases with a plate-like, but intertwined morphology. The primary segmentation is further refined to disentangle these geometrically complex precipitates into individual plate like parts by an unsupervised approach based on principle component analysis, or a U-Net based semantic segmentation trained on the former. Following the chemical and geometric analysis, detailed chemical distribution and segregation effects relative to the predominant plate-like geometry can be readily mapped without resorting to the initial voxelization.

physics.chem-ph↗

arXiv2022

Ab initio vacancy formation energies and kinetics at metal surfaces under high electric field

Recording field ion microscope images under field evaporating conditions and subsequently reconstructing the underlying atomic configuration, called three-dimensional field ion microscopy (3D-FIM) is one of the few techniques capable of resolving crystalline defects at an atomic scale. However, the quantification of the observed vacancies and their origins are still a matter of debate. It was suggested that high electric fields (1-5 V/Å) used in 3D-FIM could introduce artefact vacancies. To investigate such effects, we used density functional theory (DFT) simulations. Stepped Ni and Pt surfaces with kinks were modelled in the repeated slab approach with a (971) surface orientation. An electrostatic field of up to 4 V/Å was introduced on one side of the slab using the generalized dipole correction. Contrary to what was proposed, we show that the formation of vacancies on the electrified metal surface is more difficult compared to a field-free case. We also find that the electric field can introduce kinetic barriers to a potential vacancy-annihilation mechanism. We rationalize these findings by comparing to insights from field evaporation models.

cond-mat.mtrl-sci↗

arXiv2021

Revealing atomic-scale vacancy-solute interaction in nickel

Imaging individual vacancies in solids and revealing their interactions with solute atoms remains one of the frontiers in microscopy and microanalysis. Here we study a creep-deformed binary Ni-2 at.% Ta alloy. Atom probe tomography reveals a random distribution of Ta. Field ion microscopy, with contrast interpretation supported by density-functional theory and time-of-flight mass spectrometry, evidences a positive correlation of tantalum with vacancies. Our results support solute-vacancy binding, which explains improvement in creep resistance of Ta-containing Ni-based superalloys and helps guide future material design strategies.

cond-mat.mtrl-sci↗

arXiv2021

Three-dimensional atomically-resolved analytical imaging with a field ion microscope

Atom probe tomography (APT) helps elucidate the link between the nanoscale chemical variations and physical properties, but it has limited structural resolution. Field ion microscopy (FIM), a predecessor technique to APT, is capable of attaining atomic resolution along certain sets of crystallographic planes albeit at the expense of elemental identification. We demonstrate how two commercially-available atom probe instruments, one with a straight flight path and one fitted with a reflectron-lens, can be used to acquire time-of-flight mass spectrometry data concomitant with a FIM experiment. We outline various experimental protocols making use of temporal and spatial correlations to best discriminate field evaporated signals from the large field ionised background signal, demonstrating an unsophisticated yet efficient data mining strategy to provide this discrimination. We discuss the remaining experimental challenges that need be addressed, notably concerned with accurate detection and identification of individual field evaporated ions contained within the high field ionised flux that contributes to a FIM image. Our hybrid experimental approach can, in principle, exhibit true atomic resolution with elemental discrimination capabilities, neither of which atom probe nor field ion microscopy can individually fully deliver - thereby making this new approach, here broadly termed analytical field ion microscope (aFIM), unique.

cond-mat.mtrl-sci↗

arXiv2019

A model to predict image formation in the three-dimensional field ion microscope

This article presents a numerical model dedicated to the simulation of field ion microscopy (FIM). FIM was the first technique to image individual atoms on the surface of a material. By a careful control of the field evaporation of the atoms from the surface, the bulk of the material exposed, and, through a digitally processing a sequence of micrographs, a three-dimensional reconstruction can be achieved. 3DFIM is particularly suited to the direct observation of crystalline defects such as vacancies, interstitials, vacancy clusters, dislocations, and any combinations of theses defects that underpin the physical properties of materials. This makes 3DFIM extremely valuable for many material science and engineering applications, and further developing this technique is becoming crucial. The proposed model enables the simulation of imaging artefacts that are induced by non-regular field evaporation and by the impact of the perturbation of the electric field distribution of the distorted distribution of atoms close to defects. The model combines the meshless algorithm for field evaporation proposed by Rolland et al. (Robin-Rolland Model, or RRM) with fundamental aspects of the field ionization process of the gas image involved in FIM.

cond-mat.mtrl-sci↗

arXiv2019

Imaging individual solute atoms at crystalline imperfections in metals

Directly imaging all atoms constituting a material and, maybe more importantly, crystalline defects that dictate materials' properties, remains a formidable challenge. Here, we propose a new approach to chemistry-sensitive field-ion microscopy (FIM) combining contrast interpretation from density-functional theory (DFT) and elemental identification enabled by time-of-flight mass-spectrometry and data mining. Analytical-FIM has true atomic resolution and we demonstrate how the technique can reveal the presence of individual solute atoms at specific positions in the microstructure. The performance of this new technique is showcased in revealing individual Re atoms at crystalline defects formed in Ni during creep deformation. The atomistic details offered by A-FIM allowed us to directly compare our results with simulations, and to tackle a long-standing question of how Re extends lifetime of Ni-based superalloys in service at high-temperature.

cond-mat.mtrl-sci↗

arXiv2017

Advanced data mining in field ion microscopy

Field ion microscopy (FIM) allows to image individual surface atoms by exploiting the effect of an intense electric field. Widespread use of atomic resolution imaging by FIM has been hampered by a lack of efficient image processing/data extraction tools. Recent advances in imaging and data mining techniques have renewed the interest in using FIM in conjunction with automated detection of atoms and lattice defects for materials characterization. After a brief overview of existing routines, we review the use of machine learning (ML) approaches for data extraction with the aim to catalyze new data-driven insights into high electrical field physics. Apart from exploring various supervised and unsupervised ML algorithms in this context, we also employ advanced image processing routines for data extraction from large sets of FIM images. The outcomes and limitations of such routines are discussed, and we conclude with the possible application of energy minimization schemes to the extracted point clouds as a way of improving the spatial resolution of FIM.

physics.app-ph↗