arXiv subjects

Siddharth Soni

Publications and source records attributed to Siddharth Soni.

14 recordsLinked to original sources

arXiv2026

Scattered light noise at LIGO Livingston Observatory during O4

Scattered light is one of the most common sources of noise in the LIGO gravitational wave detectors. Light scattering is a highly non-linear process through which motion at low frequencies gets up-converted and creates noise in a higher frequency band in the detector data. From the beginning of the fourth observation run, many glitches appeared in the data of LIGO Livingston detector in the frequency range 10-40 Hz, and the morphology of these glitches suggested that they were produced by scattered light. From our analysis, we identified two different populations of scattered light glitches, one group having higher SNR than the other. The glitches of the high- SNR group were solely modulated by microseismic ground motion (ground motion in 0.1-1.0 Hz) and in this paper, we present models of possible coupling mechanisms for these glitches. We also present results of a statistical correlation analysis based on our models, which indicates that the microseismic ground motion at the corner station along the X direction is the one most correlated with the noise which create these high SNR glitches. After installing baffles very close to the test mass mirrors, we have noticed a significant reduction in the rate and SNR of these glitches. The low-SNR glitches were primarily modulated by high frequency (10-30 Hz) vertical ground motion at the corner station, and this motion was coupling through a specific vacuum chamber at the corner station. After installing an additional seismic isolation platform in that vacuum chamber, these glitches have disappeared.

astro-ph.IM↗

arXiv2026

ArchGEM: an Advanced Data Analysis Tool for Analyzing Scattered Light Noise in LIGO

Scattered light is one of the most common sources of non-stationary noise at low frequencies in Advanced LIGO detectors. It appears as arch-like features in time-frequency spectrograms, produced when stray light reflects from moving surfaces and recombines with the main interferometer beam. In this study, we present ArchGEM, an automated framework for identifying and characterizing these arches and recovering the physical properties of the scattering surfaces. ArchGEM combines a prominence-based peak-finding method with a Gaussian Mixture Model clustering approach to capture a range of scattered-light morphologies across different detector conditions. We apply ArchGEM to scattered light glitches across Advanced LIGO observing runs O3 (2019--2020) and O4 (2023--2024). We find that the average frequency distributions of this noise span 15--25 Hz in O3a and O4, but increase to 20--40 Hz during O3b. Typical inferred surface velocities are 0.2--0.5 $\mu$m/s, and inferred surface displacements are 0.1--0.3 $\mu$m. The Gaussian Mixture Model performs most consistently for complex or overlapping features, with mean frequency offsets within 5 Hz of the Gravity Spy baseline. Our results show that ArchGEM provides a practical tool for detector characterization by linking observed spectrogram features to the motion of scattering surfaces and helping guide future mitigation of scattered light noise in current and next-generation interferometers. By quantifying the temporal and spectral behavior of scattered light, ArchGEM provides a robust framework for diagnosing noise sources and guiding targeted mitigation strategies in future detector upgrades.

astro-ph.IM↗

arXiv2025

GW-YOLO: Multi-transient segmentation in LIGO using computer vision

Time series data and their time-frequency representation from gravitational-wave interferometers present multiple opportunities for the use of artificial intelligence methods associated with signal and image processing. Closely connected with this is the real-time aspect associated with gravitational-wave interferometers and the astrophysical observations they perform; the discovery potential of these instruments can be significantly enhanced when data processing can be achieved in O(1s) timescales. In this work, we introduce a novel signal and noise identification tool based on the YOLO (You Only Look Once) object detection framework. For its application into gravitational waves, we will refer to it as GW-YOLO. This tool can provide scene identification capabilities and essential information regarding whether an observed transient is any combination of noise and signal. Additionally, it supplies detailed time-frequency coordinates of the detected objects in the form of pixel masks, an essential property that can be used to understand and characterize astrophysical sources, as well as instrumental noise. The simultaneous identification of noise and signal, combined with precise pixel-level localization, represents a significant advancement in gravitational-wave data analysis. Our approach yields a 50\% detection efficiency for binary black hole signals at a signal-to-noise ratio (SNR) of 15 when such signals overlap with transient noise artifacts. When noise artifacts overlap with binary neutron star signals, our algorithm attains 50\% detection efficiency at an SNR of 30. This presents the first quantitative assessment of the ability to detect astrophysical events overlapping with realistic, instrument noise present in gravitational-wave interferometers.

astro-ph.IM↗

arXiv2025

A machine learning-enabled search for binary black hole mergers in LIGO-Virgo-KAGRAs third observing run

We conduct a search for stellar-mass binary black hole mergers in gravitational-wave data collected by the LIGO detectors during the LIGO-Virgo-KAGRA (LVK) third observing run (O3). Our search uses a machine learning (ML) based method, Aframe, an alternative to traditional matched filtering search techniques. The O3 observing run has been analyzed by the LVK collaboration, producing GWTC-3, the most recent catalog installment which has been made publicly available in 2021. Various groups outside the LVK have re-analyzed O3 data using both traditional and ML-based approaches. Here, we identify 38 candidates with probability of astrophysical origin ($p_\mathrm{astro}$) greater than 0.5, which were previously reported in GWTC-3. This is comparable to the number of candidates reported by individual matched-filter searches. In addition, we compare Aframe candidates with catalogs from research groups outside of the LVK, identifying three candidates with $p_\mathrm{astro} > 0.5$. No previously un-reported candidates are identified by Aframe. This work demonstrates that Aframe, and ML based searches more generally, are useful companions to matched filtering pipelines.

astro-ph.IM↗

arXiv2025

Coherence DeepClean: Toward autonomous denoising of gravitational-wave detector data

Technical and environmental noise in ground-based laser interferometers designed for gravitational-wave observations like Advanced LIGO, Advanced Virgo and KAGRA, can manifest as narrow (<1Hz) or broadband ($10'$s or even $100'$s of Hz) spectral lines and features in the instruments' strain amplitude spectral density. When the sources of this noise cannot be identified or removed, in cases where there are witness sensors sensitive to this noise source, denoising of the gravitational-wave strain channel can be performed in software, enabling recovery of instrument sensitivity over affected frequency bands. This noise hunting and removal process can be particularly challenging due to the wealth of auxiliary channels monitoring the interferometry and the environment and the non-linear couplings that may be present. In this work, we present a comprehensive analysis approach and corresponding cyberinfrastructure to promptly identify and remove noise in software using machine learning techniques. The approach builds on earlier work (referred to as DeepClean) in using machine learning methods for linear and non-linear regression of noise. We demonstrate how this procedure can be operated and optimized in a tandem fashion close to online data taking; it starts off with a coherence monitoring analysis that first singles out and prioritizes witness channels that can then be used by DeepClean. The resulting denoised strain by DeepClean reflects a 1.4\% improvement in the binary neutron star range, which can translate into a 4.3\% increase in the sensitive volume. This cyber infrastructure we refer to as Coherence DeepClean, or CDC, is a significant step toward autonomous operations of noise subtraction for ground-based interferometers.

gr-qc↗

arXiv2024

A Neural Network-Based Search for Unmodeled Transients in LIGO-Virgo-KAGRA's Third Observing Run

This paper presents the results of a Neural Network (NN)-based search for short-duration gravitational-wave transients in data from the third observing run of LIGO, Virgo, and KAGRA. The search targets unmodeled transients with durations of milliseconds to a few seconds in the 30-1500 Hz frequency band, without assumptions about the incoming signal direction, polarization, or morphology. Using the Gravitational Wave Anomalous Knowledge (GWAK) method, three compact binary coalescences (CBCs) identified by existing pipelines are successfully detected, along with a range of detector glitches. The algorithm constructs a low-dimensional embedded space to capture the physical features of signals, enabling the detection of CBCs, detector glitches, and unmodeled transients. This study demonstrates GWAK's ability to enhance gravitational-wave searches beyond the limits of existing pipelines, laying the groundwork for future detection strategies.

gr-qc↗

arXiv2024

Gravity Spy: Lessons Learned and a Path Forward

The Gravity Spy project aims to uncover the origins of glitches, transient bursts of noise that hamper analysis of gravitational-wave data. By using both the work of citizen-science volunteers and machine-learning algorithms, the Gravity Spy project enables reliable classification of glitches. Citizen science and machine learning are intrinsically coupled within the Gravity Spy framework, with machine-learning classifications providing a rapid first-pass classification of the dataset and enabling tiered volunteer training, and volunteer-based classifications verifying the machine classifications, bolstering the machine-learning training set and identifying new morphological classes of glitches. These classifications are now routinely used in studies characterizing the performance of the LIGO gravitational-wave detectors. Providing the volunteers with a training framework that teaches them to classify a wide range of glitches, as well as additional tools to aid their investigations of interesting glitches, empowers them to make discoveries of new classes of glitches. This demonstrates that, when giving suitable support, volunteers can go beyond simple classification tasks to identify new features in data at a level comparable to domain experts. The Gravity Spy project is now providing volunteers with more complicated data that includes auxiliary monitors of the detector to identify the root cause of glitches.

gr-qc↗

arXiv2023

Modeling and Reduction of High Frequency Scatter Noise at LIGO Livingston

The sensitivity of aLIGO detectors is adversely affected by the presence of noise caused by light scattering. Low frequency seismic disturbances can create higher frequency scattering noise adversely impacting the frequency band in which we detect gravitational waves. In this paper, we analyze instances of a type of scattered light noise we call "Fast Scatter" that is produced by motion at frequencies greater than 1 Hz, to locate surfaces in the detector that may be responsible for the noise. We model the phase noise to better understand the relationship between increases in seismic noise near the site and the resulting Fast Scatter observed. We find that mechanical damping of the Arm Cavity Baffles (ACBs) led to a significant reduction of this noise in recent data. For a similar degree of seismic motion in the 1-3 Hz range, the rate of noise transients is reduced by a factor of ~ 50.

astro-ph.IM↗

arXiv2023

A new method to distinguish gravitational-wave signals from detector noise transients with Gravity Spy

The Advanced LIGO and Advanced Virgo detectors have enabled the confident detection of dozens of mergers of black holes and neutron stars. However, the presence of detector noise transients (glitches) hinders the search for these gravitational wave (GW) signals. We prototyped a restructuring of Gravity Spy's classification model to distinguish between glitches and astrophysical signals. Our method is able to correctly classify three-quarters of retracted candidate events in O3b as non-astrophysical and 100\% of the confirmed astrophysical events as true signals. This approach will inform candidate event validation efforts in the latest observing run.

gr-qc↗

arXiv2023

Applications of Deep Learning to physics workflows

Modern large-scale physics experiments create datasets with sizes and streaming rates that can exceed those from industry leaders such as Google Cloud and Netflix. Fully processing these datasets requires both sufficient compute power and efficient workflows. Recent advances in Machine Learning (ML) and Artificial Intelligence (AI) can either improve or replace existing domain-specific algorithms to increase workflow efficiency. Not only can these algorithms improve the physics performance of current algorithms, but they can often be executed more quickly, especially when run on coprocessors such as GPUs or FPGAs. In the winter of 2023, MIT hosted the Accelerating Physics with ML at MIT workshop, which brought together researchers from gravitational-wave physics, multi-messenger astrophysics, and particle physics to discuss and share current efforts to integrate ML tools into their workflows. The following white paper highlights examples of algorithms and computing frameworks discussed during this workshop and summarizes the expected computing needs for the immediate future of the involved fields.

hep-ex↗

arXiv2023

QoQ: a Q-transform based test for Gravitational Wave transient events

The observation of transient gravitational waves is hindered by the presence of transient noise, colloquially referred to as glitches. These glitches can often be misidentified as gravitational waves by searches for unmodeled transients using the excess-power type of methods and sometimes even excite template waveforms for compact binary coalescences while using matched filter techniques. They thus create a significant background in the searches. This background is more critical in getting identified promptly and efficiently within the context of real-time searches for gravitational-wave transients. Such searches are the ones that have enabled multi-messenger astrophysics with the start of the Advanced LIGO and Advanced Virgo data taking in 2015 and they will continue to enable the field for further discoveries. With this work we propose and demonstrate the use of a signal-based test that quantifies the fidelity of the time-frequency decomposition of the putative signal based on first principles on how astrophysical transients are expected to be registered in the detectors and empirically measuring the instrumental noise. It is based on the Q-transform and a measure of the occupancy of the corresponding time-frequency pixels over select time-frequency volumes; we call it ``QoQ''. Our method shows a 40% reduction in the number of retraction of public alerts that were issued by the LIGO-Virgo-KAGRA collaborations during the third observing run with negligible loss in sensitivity. Receiver Operator Characteristic measurements suggest the method can be used in online and offline searches for transients, reducing their background significantly.

gr-qc↗

arXiv2023

Noise in the LIGO Livingston Gravitational Wave Observatory due to Trains

Environmental seismic disturbances limit the sensitivity of LIGO gravitational wave detectors. Trains near the LIGO Livingston detector produce low frequency (0.5-10 Hz) ground noise that couples into the gravitational wave sensitive frequency band (10-100 Hz) through light reflected in mirrors and other surfaces. We investigate the effect of trains during the Advanced LIGO third observing run, and propose a method to search for narrow band seismic frequencies responsible for contributing to increases in scattered light. Through the use of the linear regression tool Lasso (least absolute shrinkage and selection operator) and glitch correlations, we identify the most common seismic frequencies that correlate with increases in detector noise as 0.6-0.8 Hz, 1.7-1.9 Hz, 1.8-2.0 Hz, and 2.3-2.5 Hz in the LIGO Livingston corner station.

astro-ph.IM↗

arXiv2022

Merged-GHCIDR: Geometrical Approach to Reduce Image Data

The computational resources required to train a model have been increasing since the inception of deep networks. Training neural networks on massive datasets have become a challenging and time-consuming task. So, there arises a need to reduce the dataset without compromising the accuracy. In this paper, we present novel variations of an earlier approach called reduction through homogeneous clustering for reducing dataset size. The proposed methods are based on the idea of partitioning the dataset into homogeneous clusters and selecting images that contribute significantly to the accuracy. We propose two variations: Geometrical Homogeneous Clustering for Image Data Reduction (GHCIDR) and Merged-GHCIDR upon the baseline algorithm - Reduction through Homogeneous Clustering (RHC) to achieve better accuracy and training time. The intuition behind GHCIDR involves selecting data points by cluster weights and geometrical distribution of the training set. Merged-GHCIDR involves merging clusters having the same labels using complete linkage clustering. We used three deep learning models- Fully Connected Networks (FCN), VGG1, and VGG16. We experimented with the two variants on four datasets- MNIST, CIFAR10, Fashion-MNIST, and Tiny-Imagenet. Merged-GHCIDR with the same percentage reduction as RHC showed an increase of 2.8%, 8.9%, 7.6% and 3.5% accuracy on MNIST, Fashion-MNIST, CIFAR10, and Tiny-Imagenet, respectively.

cs.LG↗

arXiv2022

Geometrical Homogeneous Clustering for Image Data Reduction

In this paper, we present novel variations of an earlier approach called homogeneous clustering algorithm for reducing dataset size. The intuition behind the approaches proposed in this paper is to partition the dataset into homogeneous clusters and select some images which contribute significantly to the accuracy. Selected images are the proper subset of the training data and thus are human-readable. We propose four variations upon the baseline algorithm-RHC. The intuition behind the first approach, RHCKON, is that the boundary points contribute significantly towards the representation of clusters. It involves selecting k farthest and one nearest neighbour of the centroid of the clusters. In the following two approaches (KONCW and CWKC), we introduce the concept of cluster weights. They are based on the fact that larger clusters contribute more than smaller sized clusters. The final variation is GHCIDR which selects points based on the geometrical aspect of data distribution. We performed the experiments on two deep learning models- Fully Connected Networks (FCN) and VGG1. We experimented with the four variants on three datasets- MNIST, CIFAR10, and Fashion-MNIST. We found that GHCIDR gave the best accuracy of 99.35%, 81.10%, and 91.66% and a training data reduction of 87.27%, 32.34%, and 76.80% on MNIST, CIFAR10, and Fashion-MNIST respectively.

cs.LG↗