arXiv subjects

Sihao Li

Publications and source records attributed to Sihao Li.

13 recordsLinked to original sources

arXiv2026

Concurrency Control as a Service

Existing disaggregated databases separate execution and storage layers, enabling independent and elastic scaling of resources. In most cases, this design makes transaction concurrency control (CC) a critical bottleneck, which demands significant computing resources for concurrent conflict management and struggles to scale due to the coordination overhead for concurrent conflict resolution. Coupling CC with execution or storage limits performance and elasticity, as CC's resource needs do not align with the free scaling of the transaction execution layer or the storage-bound data layer. This paper proposes Concurrency Control as a Service (CCaaS), which decouples CC from databases, building an execution-CC-storage three-layer decoupled database, allowing independent scaling and upgrades for improved elasticity, resource utilization, and development agility. However, adding a new layer increases latency due to the shift in communication from hardware to network. To address this, we propose a Sharded Multi-Write OCC (SM-OCC) algorithm with an asynchronous log push-down mechanism to minimize network communications overhead and transaction latency. Additionally, we implement a multi-write architecture with a deterministic conflict resolution method to reduce coordination overhead in the CC layer, thereby improving scalability. CCaaS is designed to be connected by a variety of execution and storage engines. Existing disaggregated databases can be revolutionized with CCaaS to achieve high elasticity, scalability, and high performance. Results show that CCaaS achieves 1.02-3.11X higher throughput and 1.11-2.75X lower latency than SoTA disaggregated databases.

cs.DB↗

arXiv2025

DentalSplat: Dental Occlusion Novel View Synthesis from Sparse Intra-Oral Photographs

In orthodontic treatment, particularly within telemedicine contexts, observing patients' dental occlusion from multiple viewpoints facilitates timely clinical decision-making. Recent advances in 3D Gaussian Splatting (3DGS) have shown strong potential in 3D reconstruction and novel view synthesis. However, conventional 3DGS pipelines typically rely on densely captured multi-view inputs and precisely initialized camera poses, limiting their practicality. Orthodontic cases, in contrast, often comprise only three sparse images, specifically, the anterior view and bilateral buccal views, rendering the reconstruction task especially challenging. The extreme sparsity of input views severely degrades reconstruction quality, while the absence of camera pose information further complicates the process. To overcome these limitations, we propose DentalSplat, an effective framework for 3D reconstruction from sparse orthodontic imagery. Our method leverages a prior-guided dense stereo reconstruction model to initialize the point cloud, followed by a scale-adaptive pruning strategy to improve the training efficiency and reconstruction quality of 3DGS. In scenarios with extremely sparse viewpoints, we further incorporate optical flow as a geometric constraint, coupled with gradient regularization, to enhance rendering fidelity. We validate our approach on a large-scale dataset comprising 950 clinical cases and an additional video-based test set of 195 cases designed to simulate real-world remote orthodontic imaging conditions. Experimental results demonstrate that our method effectively handles sparse input scenarios and achieves superior novel view synthesis quality for dental occlusion visualization, outperforming state-of-the-art techniques.

cs.CV↗

arXiv2025

EKF-Based Fusion of Wi-Fi/LiDAR/IMU for Indoor Localization and Navigation

Conventional Wi-Fi received signal strength indicator (RSSI) fingerprinting cannot meet the growing demand for accurate indoor localization and navigation due to its lower accuracy, while solutions based on light detection and ranging (LiDAR) can provide better localization performance but is limited by their higher deployment cost and complexity. To address these issues, we propose a novel indoor localization and navigation framework integrating Wi-Fi RSSI fingerprinting, LiDAR-based simultaneous localization and mapping (SLAM), and inertial measurement unit (IMU) navigation based on an extended Kalman filter (EKF). Specifically, coarse localization by deep neural network (DNN)-based Wi-Fi RSSI fingerprinting is refined by IMU-based dynamic positioning using a Gmapping-based SLAM to generate an occupancy grid map and output high-frequency attitude estimates, which is followed by EKF prediction-update integrating sensor information while effectively suppressing Wi-Fi-induced noise and IMU drift errors. Multi-group real-world experiments conducted on the IR building at Xi'an Jiaotong-Liverpool University demonstrates that the proposed multi-sensor fusion framework suppresses the instability caused by individual approaches and thereby provides stable accuracy across all path configurations with mean two-dimensional (2D) errors ranging from 0.2449 m to 0.3781 m. In contrast, the mean 2D errors of Wi-Fi RSSI fingerprinting reach up to 1.3404 m in areas with severe signal interference, and those of LiDAR/IMU localization are between 0.6233 m and 2.8803 m due to cumulative drift.

cs.RO↗

arXiv2025

Impact of Environmental Factors on LoRa 2.4 GHz Time of Flight Ranging Outdoors

In WSN/IoT, node localization is essential to long-running applications for accurate environment monitoring and event detection, often covering a large area in the field. Due to the lower time resolution of typical WSN/IoT platforms (e.g., 1 microsecond on ESP32 platforms) and the jitters in timestamping, packet-level localization techniques cannot provide meter-level resolution. For high-precision localization as well as world-wide interoperability via 2.4-GHz ISM band, a new variant of LoRa, called LoRa 2.4 GHz, was proposed by semtech, which provides a radio frequency (RF) time of flight (ToF) ranging method for meter-level localization. However, the existing datasets reported in the literature are limited in their coverages and do not take into account varying environmental factors such as temperature and humidity. To address these issues, LoRa 2.4 GHz RF ToF ranging data was collected on a sports field at the XJTLU south campus, where three LoRa nodes logged samples of ranging with a LoRa base station, together with temperature and humidity, at reference points arranged as a 3x3 grid covering 400 square meter over three weeks and uploaded all measurement records to the base station equipped with an ESP32-based transceiver for machine and user communications. The results of a preliminary investigation based on a simple deep neural network (DNN) model demonstrate that the environmental factors, including the temperature and humidity, significantly affect the accuracy of ranging, which calls for advanced methods of compensating for the effects of environmental factors on LoRa RF ToF ranging outdoors.

cs.NI↗

arXiv2024

Decentralized Indoor Localization Based on A Sparse Gaussian Process with Reduced-Dimensional Inputs for Real-Time Sensing and Training on IoT Devices

As a large number of Internet of Things (IoT) devices are deployed in the field, there arises huge potential of edge computing for indoor localization on those devices. Conventional indoor localization based on a centralized server with substantial computational resources, often covering a number of multistory buildings, cannot easily adapt to time-varying indoor electromagnetic environments due to its high cost of fingerprint database update and model retraining; the centralized server is also susceptible to security breaches. To address these issues, we propose a decentralized indoor localization framework, leveraging models based on a Sparse Gaussian Process with Reduced-dimensional Inputs (SGP-RI) deployed to IoT devices for a smaller service area, which can quickly adapt to time-varying indoor electromagnetic environments through real-time sensing and retraining. The experimental results based on a multibuilding, multifloor static database and a single-building, single-floor dynamic database, demonstrate the feasibility of the proposed framework, where the SGP-RI with less than half the training samples can produce localization performance comparable to the standard Gaussian process (GP) with the whole training samples.

eess.SP↗

arXiv2024

Mean Teacher based SSL Framework for Indoor Localization Using Wi-Fi RSSI Fingerprinting

Conventional large-scale indoor localization based on Wi-Fi RSSI fingerprinting faces issues of time-consuming and labor-intensive labeled data collection, limited generalization of a model trained under a supervised learning (SL) framework due to its inability to leverage unlabeled data, and model performance degradation in dynamic scenarios with environmental variations. To address those challenging issues, we propose a comprehensive semi-supervised learning (SSL) framework for a deep neural network (DNN) localization model based on the Mean Teacher, which incorporates access point selection, model pre-training/cloning, and batch-level noise injection. The proposed SSL framework can not only efficiently use hybrid labeled/unlabeled databases for static training of a model during the offline phase, but also exploit unlabeled fingerprints from users of the indoor localization system deployed in the field for continuous retraining of the model during the online phase. We base the proposed SSL framework on the Mean Teacher because it can generate more stable target labels through an exponential moving average of model weights without incurring the high computational complexity of the Pi-Model and with better scalability for online learning than Temporal Ensembling, making it an optimal choice that strikes the right balance between performance and computational complexity in large-scale indoor localization. With the UJIIndoorLoc database, the proposed SSL framework reduces the mean 3D errors of the CNNLoc and SIMO-DNN models by 7.403% and 7.748%, respectively, compared with those under the conventional SL framework; with the XJTLU dynamic database, the maximum reduction in mean 2D error reaches up to 49.227% under a dynamic training scenario, demonstrating the substantial performance improvement achieved by the proposed SSL framework.

cs.LG↗

arXiv2024

Hierarchical Stage-Wise Training of Linked Deep Neural Networks for Multi-Building and Multi-Floor Indoor Localization Based on Wi-Fi RSSI Fingerprinting

In this paper, we present a new solution to the problem of large-scale multi-building and multi-floor indoor localization based on linked neural networks, where each neural network is dedicated to a sub-problem and trained under a hierarchical stage-wise training framework. When the measured data from sensors have a hierarchical representation as in multi-building and multi-floor indoor localization, it is important to exploit the hierarchical nature in data processing to provide a scalable solution. In this regard, the hierarchical stage-wise training framework extends the original stage-wise training framework to the case of multiple linked networks by training a lower-hierarchy network based on the prior knowledge gained from the training of higher-hierarchy networks. The experimental results with the publicly-available UJIIndoorLoc multi-building and multi-floor Wi-Fi RSSI fingerprint database demonstrate that the linked neural networks trained under the proposed hierarchical stage-wise training framework can achieve a three-dimensional localization error of 8.19 m, which, to the best of the authors' knowledge, is the most accurate result ever obtained for neural network-based models trained and evaluated with the full datasets of the UJIIndoorLoc database, and that, when applied to a model based on hierarchical convolutional neural networks, the proposed training framework can also significantly reduce the three-dimensional localization error from 11.78 m to 8.71 m.

cs.LG↗

arXiv2024

Static vs. Dynamic Databases for Indoor Localization based on Wi-Fi Fingerprinting: A Discussion from a Data Perspective

Wi-Fi fingerprinting has emerged as the most popular approach to indoor localization. The use of ML algorithms has greatly improved the localization performance of Wi-Fi fingerprinting, but its success depends on the availability of fingerprint databases composed of a large number of RSSIs, the MAC addresses of access points, and the other measurement information. However, most fingerprint databases do not reflect well the time varying nature of electromagnetic interferences in complicated modern indoor environment. This could result in significant changes in statistical characteristics of training/validation and testing datasets, which are often constructed at different times, and even the characteristics of the testing datasets could be different from those of the data submitted by users during the operation of localization systems after their deployment. In this paper, we consider the implications of time-varying Wi-Fi fingerprints on indoor localization from a data-centric point of view and discuss the differences between static and dynamic databases. As a case study, we have constructed a dynamic database covering three floors of the IR building of XJTLU based on RSSI measurements, over 44 days, and investigated the differences between static and dynamic databases in terms of statistical characteristics and localization performance. The analyses based on variance calculations and Isolation Forest show the temporal shifts in RSSIs, which result in a noticeable trend of the increase in the localization error of a Gaussian process regression model with the maximum error of 6.65 m after 14 days of training without model adjustments. The results of the case study with the XJTLU dynamic database clearly demonstrate the limitations of static databases and the importance of the creation and adoption of dynamic databases for future indoor localization research and real-world deployment.

cs.LG↗

arXiv2023

Towards Transaction as a Service

This paper argues for decoupling transaction processing from existing two-layer cloud-native databases and making transaction processing as an independent service. By building a transaction as a service (TaaS) layer, the transaction processing can be independently scaled for high resource utilization and can be independently upgraded for development agility. Accordingly, we architect an execution-transaction-storage three-layer cloud-native database. By connecting to TaaS, 1) the AP engines can be empowered with ACID TP capability, 2) multiple standalone TP engine instances can be incorporated to support multi-master distributed TP for horizontal scalability, 3) multiple execution engines with different data models can be integrated to support multi-model transactions, and 4) high performance TP is achieved through extensive TaaS optimizations and consistent evolution. Cloud-native databases deserve better architecture: we believe that TaaS provides a path forward to better cloud-native databases.

cs.DB↗

arXiv2023

GeoGauss: Strongly Consistent and Light-Coordinated OLTP for Geo-Replicated SQL Database

Multinational enterprises conduct global business that has a demand for geo-distributed transactional databases. Existing state-of-the-art databases adopt a sharded master-follower replication architecture. However, the single-master serving mode incurs massive cross-region writes from clients, and the sharded architecture requires multiple round-trip acknowledgments (e.g., 2PC) to ensure atomicity for cross-shard transactions. These limitations drive us to seek yet another design choice. In this paper, we propose a strongly consistent OLTP database GeoGauss with full replica multi-master architecture. To efficiently merge the updates from different master nodes, we propose a multi-master OCC that unifies data replication and concurrent transaction processing. By leveraging an epoch-based delta state merge rule and the optimistic asynchronous execution, GeoGauss ensures strong consistency with light-coordinated protocol and allows more concurrency with weak isolation, which are sufficient to meet our needs. Our geo-distributed experimental results show that GeoGauss achieves 7.06X higher throughput and 17.41X lower latency than the state-of-the-art geo-distributed database CockroachDB on the TPC-C benchmark.

cs.DB↗

arXiv2023

GRB 220408B: A Three-Episode Burst from a Precessing Jet

Jet precession has previously been proposed to explain the apparently repeating features in the light curves of a few gamma-ray bursts (GRBs). In this {\it Letter}, we further apply the precession model to a bright GRB 220408B by examining both its temporal and spectral consistency with the predictions of the model. As one of the recently confirmed GRBs observed by our GRID CubeSat mission, GRB 220408B is noteworthy as it exhibits three apparently similar emission episodes. Furthermore, the similarities are reinforced by their strong temporal correlations and similar features in terms of spectral evolution and spectral lags. Our analysis demonstrates that these features can be well explained by the modulated emission of a Fast-Rise-Exponential-Decay (FRED) shape light curve intrinsically produced by a precessing jet with a precession period of $18.4 \pm 0.2$ seconds, a nutation period of $11.1 \pm 0.2$ seconds and viewed off-axis. This study provides a straightforward explanation for the complex yet similar multi-episode GRB light curves.

astro-ph.HE↗

arXiv2022

On the Multidimensional Augmentation of Fingerprint Data for Indoor Localization in A Large-Scale Building Complex Based on Multi-Output Gaussian Process

Wi-Fi fingerprinting becomes a dominant solution for large-scale indoor localization due to its major advantage of not requiring new infrastructure and dedicated devices. The number and the distribution of Reference Points (RPs) for the measurement of localization fingerprints like RSSI during the offline phase, however, greatly affects the localization accuracy; for instance, the UJIIndoorLoc is known to have the issue of uneven spatial distribution of RPs over buildings and floors. Data augmentation has been proposed as a feasible solution to not only improve the smaller number and the uneven distribution of RPs in the existing fingerprint databases but also reduce the labor and time costs of constructing new fingerprint databases. In this paper, we propose the multidimensional augmentation of fingerprint data for indoor localization in a large-scale building complex based on Multi-Output Gaussian Process (MOGP) and systematically investigate the impact of augmentation ratio as well as MOGP kernel functions and models with their hyperparameters on the performance of indoor localization using the UJIIndoorLoc database and the state-of-the-art neural network indoor localization model based on a hierarchical RNN. The investigation based on experimental results suggests that we can generate synthetic RSSI fingerprint data up to ten times the original data -- i.e., the augmentation ratio of 10 -- through the proposed multidimensional MOGP-based data augmentation without significantly affecting the indoor localization performance compared to that of the original data alone, which extends the spatial coverage of the combined RPs and thereby could improve the localization performance at the locations that are not part of the test dataset.

cs.NI↗

arXiv2022

Multi-Output Gaussian Process-Based Data Augmentation for Multi-Building and Multi-Floor Indoor Localization

Location fingerprinting based on RSSI becomes a mainstream indoor localization technique due to its advantage of not requiring the installation of new infrastructure and the modification of existing devices, especially given the prevalence of Wi-Fi-enabled devices and the ubiquitous Wi-Fi access in modern buildings. The use of AI/ML technologies like DNNs makes location fingerprinting more accurate and reliable, especially for large-scale multi-building and multi-floor indoor localization. The application of DNNs for indoor localization, however, depends on a large amount of preprocessed and deliberately-labeled data for their training. Considering the difficulty of the data collection in an indoor environment, especially under the current epidemic situation of COVID-19, we investigate three different methods of RSSI data augmentation based on Multi-Output Gaussian Process (MOGP), i.e., by a single floor, by neighboring floors, and by a single building; unlike Single-Output Gaussian Process (SOGP), MOGP can take into account the correlation among RSSI observations from multiple Access Points (APs) deployed closely to each other (e.g., APs on the same floor of a building) by collectively handling them. The feasibility of the MOGP-based RSSI data augmentation is demonstrated through experiments based on the state-of-the-art RNN indoor localization model and the UJIIndoorLoc, i.e., the most popular publicly-available multi-building and multi-floor indoor localization database, where the RNN model trained with the UJIIndoorLoc database augmented by using the whole RSSI data of a building in fitting an MOGP model (i.e., by a single building) outperforms the other two augmentation methods as well as the RNN model trained with the original UJIIndoorLoc database, resulting in the mean three-dimensional positioning error of 8.42 m.

cs.NI↗