arXiv subjects

Silvania F. Pereira

Publications and source records attributed to Silvania F. Pereira.

12 recordsLinked to original sources

arXiv2024

Optimum parameter estimation of shaped phase objects

We show a general method to estimate with optimum precision, i.e., the best precision determined by the light-matter interaction process, a set of parameters that characterize a phase object. The method derives from ideas presented by Pezze et al., [Phys. Rev. Lett. 119, 130504 (2017)]. Our goal is to illuminate the main characteristics of this method as well as its applications to the physics community, probably not familiar with the formal quantum language usually employed in works related to quantum estimation theory. First, we derive precision bounds for the estimation of the set of parameters characterizing the phase object. We compute the Cràmer-Rao lower bound for two experimentally relevant types of illumination: a multimode coherent state with mean photon number N, and N copies of a multimode single-photon quantum state. We show under which conditions these two models are equivalent. Second, we show that the optimum precision can be achieved by projecting the light reflected/transmitted from the object onto a set of modes with engineered spatial shape. We describe how to construct these modes, and demonstrate explicitly that the precision of the estimation using these measurements is optimum. As example, we apply these results to the estimation of the height and sidewall angle of a cliff-like nanostructure, an object relevant in semiconductor industry for the evaluation of nanofabrication techniques.

quant-ph↗

arXiv2023

Coherent Fourier Scatterometry for detection of killer defects on silicon carbide samples

It has been a widely growing interest in using silicon carbide (SiC)in high-power electronic devices. Yet, SiC wafers may contain killer defects that could reduce fabrication yield and make the device fall into unexpected failures. To prevent these failures from happening, it is very important to develop inspection tools that can detect, characterize and locate these defects in a non-invasive way. Current inspection techniques such as Dark Field or Bright field microscopy are effectively able to visualize most such defects; however, there are some scenarios where the inspection becomes problematic or almost impossible, such as when the defects are too small or have low contrast or if the defects lie deep into the substrate. Thus, an alternative method is needed to face these challenges. In this paper, we demonstrate the application of coherent Fourier scatterometry (CFS) as a complementary tool in addition to the conventional techniques to overcome different and problematic scenarios of killer defects inspection on SiC samples. Scanning electron microscopy (SEM)has been used to assess the same defects to validate the findings of CFS. Great consistency has been demonstrated in the comparison between the results obtained with CFS and SEM.

physics.app-ph↗

arXiv2023

High-quality amorphous Silicon Carbide for hybrid photonic integration at low temperature

Integrated photonic platforms have proliferated in recent years, each demonstrating its own unique strengths and shortcomings. However, given the processing incompatibilities of different platforms, a formidable challenge in the field of integrated photonics still remains for combining the strength of different optical materials in one hybrid integrated platform. Silicon carbide is a material of great interest because of its high refractive index, strong second and third-order non-linearities and broad transparecy window in the visible and near infrared. However, integrating SiC has been difficult, and current approaches rely on transfer bonding techniques, that are time consuming, expensive and lacking precision in layer thickness. Here, we demonstrate high index Amorphous Silicon Carbide (a-SiC) films deposited at 150$^{\circ}$C and verify the high performance of the platform by fabricating standard photonic waveguides and ring resonators. The intrinsic quality factors of single-mode ring resonators were in the range of $Q_{int} = (4.7-5.7)\times10^5$ corresponding to optical losses between 0.78-1.06 dB/cm. We then demonstrate the potential of this platform for future heterogeneous integration with ultralow loss thin SiN and LiNbO$_3$ platforms.

physics.optics↗

arXiv2023

Quantum enhanced non-interferometric quantitative phase imaging

Quantum entanglement and squeezing have significantly improved phase estimation and imaging in interferometric settings beyond the classical limits. However, for a wide class of non-interferometric phase imaging/retrieval methods vastly used in the classical domain e.g., ptychography and diffractive imaging, a demonstration of quantum advantage is still missing. Here, we fill this gap by exploiting entanglement to enhance imaging of a pure phase object in a non-interferometric setting, only measuring the phase effect on the free-propagating field. This method, based on the so-called "transport of intensity equation", is quantitative since it provides the absolute value of the phase without prior knowledge of the object and operates in wide-field mode, so it does not need time-consuming raster scanning. Moreover, it does not require spatial and temporal coherence of the incident light. Besides a general improvement of the image quality at a fixed number of photons irradiated through the object, resulting in better discrimination of small details, we demonstrate a clear reduction of the uncertainty in the quantitative phase estimation. Although we provide an experimental demonstration of a specific scheme in the visible spectrum, this research also paves the way for applications at different wavelengths, e.g., X-ray imaging, where reducing the photon dose is of utmost importance.

quant-ph↗

arXiv2021

Phase retrieval enhanced by quantum correlation

Quantum correlation, such as entanglement and squeezing have shown to improve phase estimation in interferometric setups on one side, and non-interferometric imaging scheme of amplitude object on the other. In the last case, quantum correlation among a pair of beams leads to a sub-shot-noise readout of the image intensity pattern, where weak details, otherwise hidden in the noise, can be appreciated. In this paper we propose a technique which exploits entanglement to enhance quantitative phase retrieval of an object in a non-interferometric setting, i.e only measuring the propagated intensity pattern after interaction with the object. The method exploits existing technology, it operates in wide field mode, so does not require time consuming raster scanning and can operate with small spatial coherence of the incident field. This protocol can find application in optical microscopy and X-ray imaging, reducing the photon dose necessary to achieve a fixed signal-to-noise ratio.

quant-ph↗

arXiv2021

Mid-infrared Single-photon Detection Using Superconducting NbTiN Nanowires with Sub-15 ps Time Resolution in a Gifford-McMahon Cryocooler

Shortly after their inception, superconducting nanowire single-photon detectors (SNSPDs) became the leading quantum light detection technology. With the capability of detecting single-photons with near-unity efficiency, high time resolution, low dark count rate, and fast recovery time, SNSPDs outperform conventional single-photon detection techniques. However, detecting lower energy single-photons (<0.8 eV) with high efficiency and low timing jitter has remained a challenge. To achieve unity internal efficiency at mid-infrared wavelengths, previous works used amorphous superconducting materials with low energy gaps at the expense of reduced time resolution (close to a nanosecond), and by operating them in complex mK dilution refrigerators. In this work, we provide an alternative approach with SNSPDs fabricated from 5-9.5 nm thick NbTiN superconducting films and devices operated in conventional Gifford-McMahon (GM) cryocoolers. By optimizing the superconducting film deposition process, film thickness and nanowire design, our fiber-coupled devices achieved > 70% system detection efficiency (SDE) at 2 μm and sub-15 ps timing jitter. Furthermore, detectors from the same batch demonstrated unity internal detection efficiency at 3 μm and 80% internal efficiency at 4 μm, paving the road for an efficient mid-infrared single-photon detection technology with unparalleled time resolution and without mK cooling requirements.

physics.ins-det↗

arXiv2020

Detecting Infrared Single Photons with Near-Unity System Detection Efficiency

Single photon detectors are indispensable tools in optics, from fundamental measurements to quantum information processing. The ability of superconducting nanowire single photon detectors to detect single photons with unprecedented efficiency, short dead time and high time resolution over a large frequency range enabled major advances in quantum optics. However, combining near-unity system detection efficiency with high timing performance remains an outstanding challenge. In this work, we show novel superconducting nanowire single photon detectors fabricated on membranes with 94-99.5 (plus minus 2.07%) system detection efficiency in the wavelength range 1280-1500 nm. The SiO2/Au membrane enables broadband absorption in small SNSPDs, offering high detection efficiency in combination with high timing performance. With low noise cryogenic amplifiers operated in the same cryostat, our efficient detectors reach timing jitter in the range of 15-26 ps. We discuss the prime challenges in optical design, device fabrication as well as accurate and reliable detection efficiency measurements to achieve high performance single-photon detection. As a result, the fast-developing fields of quantum information science, quantum metrology, infrared imaging and quantum networks will greatly benefit from this far-reaching quantum detection technology.

quant-ph↗

arXiv2020

Coherent Fourier scatterometry reveals nerve fiber crossings in the brain

Previous simulation studies by Menzel et al. [Phys. Rev. X 10, 021002 (2020)] have shown that scattering patterns of light transmitted through artificial nerve fiber constellations contain valuable information about the tissue substructure such as the individual fiber orientations in regions with crossing nerve fibers. Here, we present a method that measures these scattering patterns in monkey and human brain tissue using coherent Fourier scatterometry with normally incident light. By transmitting a non-focused laser beam (wavelength of 633 nm) through unstained histological brain sections, we measure the scattering patterns for small tissue regions (with diameters of 0.1-1 mm), and show that they are in accordance with the simulated scattering patterns. We reveal the individual fiber orientations for up to three crossing nerve fiber bundles, with crossing angles down to 25°.

physics.med-ph↗

arXiv2020

A platform for high performance photon correlation measurements

A broad range of scientific and industrial disciplines require precise optical measurements at very low light levels. Single-photon detectors combining high efficiency and high time resolution are pivotal in such experiments. By using relatively thick films of NbTiN (8-11\,nm) and improving the pattern fidelity of the nano-structure of the superconducting nanowire single-photon detectors (SNSPD), we fabricated devices demonstrating superior performance over all previously reported detectors in the combination of efficiency and time resolution. Our findings prove that small variations in the nanowire width, in the order of a few nanometers, can lead to a significant penalty on their temporal response. Addressing these issues, we consistently achieved high time resolution (best device 7.7\,ps, other devices $\sim$10-16\,ps) simultaneously with high system detection efficiencies ($80-90\%$) in the wavelength range of 780-1000\,nm, as well as in the telecom bands (1310-1550\,nm). The use of thicker films allowed us to fabricate large-area multi-pixel devices with homogeneous pixel performance. We first fabricated and characterized a $100\times100\, μm^2$ 16-pixel detector and showed there was little variation among individual pixels. Additionally, to showcase the power of our platform, we fabricated and characterized 4-pixel multimode fiber-coupled detectors and carried out photon correlation experiments on a nanowire quantum dot resulting in $g^2(0)$ values lower than 0.04. The multi-pixel detectors alleviate the need for beamsplitters and can be used for higher order correlations with promising prospects not only in the field of quantum optics, but also in bio-imaging applications, such as fluorescence microscopy and positron emission tomography.

physics.ins-det↗

arXiv2019

Multimode Fiber Coupled Superconducting Nanowire Single Photon Detectors with High Detection Efficiency and Time Resolution

In the past decade superconducting nanowire single photon detectors (SNSPDs) have gradually become an indispensable part of any demanding quantum optics experiment. Until now, most SNSPDs are coupled to single-mode fibers. SNSPDs coupled to multimode fibers have shown promising efficiencies but are yet to achieve high time resolution. For a number of applications ranging from quantum nano-photonics to bio-optics, high efficiency and high time-resolution are desired at the same time. In this paper, we demonstrate the role of polarization on the efficiency of multi-mode fiber coupled detectors, and show how it can be addressed. We fabricated high performance 20, 25 and 50μm diameter detectors targeted for visible, near infrared, and telecom wavelengths. A custom-built setup was used to simulate realistic experiments with randomized modes in the fiber. We simultaneously achieved system efficiency >80% and time resolution <20 ps and made large detectors that offer outstanding performances.

physics.ins-det↗

arXiv2015

Extended object reconstruction from image intensities blurred by unknown aberrations

We describe and experimentally validate an algorithm to reconstruct an unknown extended object from through-focus measured image intensities blurred by unknown aberrations. It is shown that the method can recover diffraction-limited image quality. The algorithm is a rigorous, computational optics alternative to the conventional adaptive optics which requires additional high end optical devices to measure and to correct the wavefront aberrations. The method can be applied to any optical system that fulfills the condition of incoherent imaging.

physics.optics↗

arXiv2012

Birefringence of small apertures for shaping ultrashort pulses

For ultrashort pulses having different states of polarization, the experienced time delay when passing through small apertures is different. In the case of a small slit (or a circular aperture), we report a significantly stronger dispersion for the TE (or azimuthal) mode as compared to that for the TM (or radial) mode, creating a noticeable time delay between the two orthogonal polarization states, even for very thin apertures. The birefringent effect of small apertures is caused by waveguide mode dispersion. In essence, the propagation constant of the excited modes varies with wavelength differently for othogonal polarization states: it increases with the incoming wavelength for TE (or azimuthal) and remains constant for TM (or radial) mode. A fundamental understanding of this phenomenon helps to explain, for example, the use of small apertures as wave plates. Furthermore, this effect can be exploited by tailoring the width and thickness of the aperture to obtain the desired pulse-shape and delay.

physics.optics↗