arXiv subjects

Simen Å. Ellingsen

Publications and source records attributed to Simen Å. Ellingsen.

50 records · Page 3Linked to original sources

arXiv2012

Casimir-Polder interaction of fullerene molecules with surfaces

We calculate the thermal Casimir--Polder potential of C60 and C70 fullerene molecules near gold and silicon nitride surfaces, motivated by their relevance for molecular matter wave interference experiments. We obtain the coefficients governing the asymptotic power laws of the interaction in the thermal, retarded and nonretarded distance regimes and evaluate the full potential numerically. The interaction is found to be dominated by electronic transitions, and hence independent of the internal temperature of the molecules. The contributions from phonon transitions, which are affected by the molecular temperature, give rise to only a small correction. Moreover, we find that the sizeable molecular line widths of thermal fullerenes may modify the nonretarded interaction, depending on the model used. Detailed measurements of the nonretarded potential of fullerene thus allow one to distinguish between different theories of incorporating damping.

quant-ph↗

arXiv2012

Casimir-Polder energy level shifts of an out-of-equilibrium particle near a microsphere

Rydberg atoms and beams of ultracold polar molecules have become highly useful experimental tools in recent years. There is therefore a need for accessible calculations of interaction potentials between such particles and nearby surfaces and structures, bearing in mind that the particles are far out of thermal equilibrium with their environment and that their interaction is predominantly non-retarded. Based on a new perturbative expansion with respect to the inverse speed of light and the inverse conductivity, we derive a simple, closed-form expression for the interaction potential (i.e., the particle energy level shifts) of a particle and a metallic sphere that is is accurate at better than 1% level for typical experimental set-ups at room temperature and above, and off by no more than a few percent at any temperature including zero. Our result illuminates the influence of retardation and imperfect conductivity and the interplay of these effects with geometry. The method developed for the present study may be applied to other, more complex geometries.

quant-ph↗

arXiv2011

Microdroplet oscillations during optical pulling

It was recently shown theoretically that it is possible to pull a spherical dielectric body towards the source of a laser beam [Nature Photonics {\bf 5}, 531 (2011)], a result with immediate consequences to optical manipulation of small droplets. Optical pulling can be realised e.g.\ using a diffraction free Bessel beam, and is expected to be of great importance in manipulation of microscopic droplets in micro- and nanofluidics. Compared to conventional optical pushing, however, the radio of optical net force to stress acting on a droplet is much smaller, increasing the importance of oscillations. We describe the time-dependent surface deformations of a water microdroplet under optical pulling to linear order in the deformation. Shape oscillations have a lifetime in the order of microseconds for droplet radii of a few micrometers. The force density acting on the initially spherical droplet is strongly peaked near the poles on the beam axis, causing the deformations to take the form of jet-like protrusions.

physics.flu-dyn↗

arXiv2011

Electrostrictive fluid pressure from a laser beam

Recent times have seen surge of research activity on systems combining fluid mechanics and electromagnetic fields. In radiation optics, whenever information about the distribution of pressure in a dielectric fluid is required, the contribution from electrostriction becomes important. In the present paper we calculate how the local pressure varies with position and time when a laser beam is imposed in a uniform fluid. A Gaussian intensity profile of arbitrary time dependence is assumed for the beam, and general results are derived in this case. For demonstration we analyze two different cases: first, that the beam is imposed suddenly (mathematically in the form of a step function); secondly, that the beam is switched on in a soft way. In both cases, simple analytical expressions for the pressure distribution are found.

physics.flu-dyn↗

arXiv2011

Temperature-independent Casimir-Polder forces in arbitrary geometries

We show that the Casimir-Polder potential of a particle in an energy eigenstate at nonretarded distance from a well-conducting body of arbitrary shape is independent of the environment temperature. This is true even when the thermal photon numbers at the relevant atomic transition energies are large. A compact expression is obtained for the temperature-independent potential, which can greatly simplify calculations in nontrivial geometries for experimentally relevant systems such as Rydberg atoms and polar molecules. We give criteria for the validity of our temperature-independent result. They are illustrated by numerical studies of a particle near a gold sphere or inside a gold cylindrical cavity.

quant-ph↗

arXiv2010

Electromagnetic Momentum Conservation in media

That static electric and magnetic fields can store momentum may be perplexing, but is necessary to ensure total conservation of momentum. Simple situations in which such field momentum is transferred to nearby bodies and point charges have often been considered for pedagogical purposes, normally assuming vacuum surroundings. If dielectric media are involved, however, the analysis becomes more delicate, not least since one encounters the electromagnetic energy-momentum problem in matter, the `Abraham-Minkowski enigma', of what the momentum is of a photon in matter. We analyze the momentum balance in three nontrivial examples obeying azimuthal symmetry, showing how the momentum conservation is satisfied as the magnetic field decays and momentum is transferred to bodies present. In the last of the examples, that of point charge outside a dielectric sphere in an infinite magnetic field, we find that not all of the field momentum is transferred to the nearby bodies; a part of the momentum appears to vanish as momentum flux towards infinity. We discuss this and other surprising observations which can be attributed to the assumption of magnetic fields of infinite extent. We emphasize how formal arguments of conserved quantities cannot determine which energy-momentum tensor is more "correct", and each of our conservation checks may be performed equally well in the Minkowski or Abraham framework.

physics.optics↗

arXiv2010

Thermal Casimir-Polder shifts in Rydberg atoms near metallic surfaces

The Casimir-Polder (CP) potential and transition rates of a Rydberg atom above a plane metal surface at finite temperature are discussed. As an example, the CP potential and transition rates of a rubidium atom above a copper surface at room temperature is computed. Close to the surface we show that the quadrupole correction to the force is significant and increases with increasing principal quantum number n. For both the CP potential and decay rates one finds that the dominant contribution comes from the longest wavelength transition and the potential is independent of temperature. We provide explicit scaling laws for potential and decay rates as functions of atom-surface distance and principal quantum number of the initial Rydberg state.

quant-ph↗

arXiv2010

Casimir-Polder potential and transition rate in resonating cylindrical cavities

We consider the Casimir-Polder potential of particles placed inside a metallic cylindrical cavity at finite temperatures, taking account of thermal non-equilibrium effects. In particular, we study how the resonant (thermal non-equilibrium) potential and transition rates can be enhanced by fine-tuning the radius of the cavity to match the transition wavelength of the dominant transition of the particle. Numerical calculations show that the CP potential acting atoms prepared in low-lying Rydberg states can be enhanced beyond 30 kHz, which is within the range of observability of modern experiments. Because the magnitude of the resonance peaks depend sensitively on the low frequency dissipation of the cavity metal, experiments in this set-up could be a critical test of the disputed thermal correction to the Casimir force between metal plates.

quant-ph↗

arXiv2010

Model for Density Waves in Gravity-Driven Granular Flow in Narrow Pipes

A gravity-driven flow of grains through a narrow pipe in vacuum is studied by means of a one-dimensional model with two coefficients of restitution. Numerical simulations show clearly how density waves form when a strikingly simple criterion is fulfilled: that dissipation due to collisions between the grains and the walls of the pipe is greater per collision than that which stems from collisions between particles. Counterintuitively, the highest flow rate is observed when the number of grains per density wave grows large. We find strong indication that the number of grains per density wave always approaches a constant as the particle number tends to infinity, and that collapse to a single wave, which was often observed also in previous simulations, occurs because the number of grains is insufficient for multiple wave formation.

cond-mat.soft↗

arXiv2010

Casimir-Polder Potential in Thermal Non-Equilibrium

Different non-equilibrium situations have recently been considered when studying the thermal Casimir--Polder interaction with a body. We show that the Keldysh Green function method provides a very general common framework for such studies where non-equilibrium of either the atom or the body with the environment can be accounted for. We apply the results to the case of ground state polar molecules out of equilibrium with their environment, observing several striking effects. We consider thermal Casimir--Polder potentials in planar configurations, and new results for a molecule in a cylindrical cavity are reported, showing similar characteristic behaviour as found in planar geometry.

quant-ph↗

arXiv2010

Casimir-Foucault interaction: Free energy and entropy at low temperature

It was recently found that thermodynamic anomalies which arise in the Casimir effect between metals described by the Drude model can be attributed to the interaction of fluctuating Foucault (or eddy) currents [Phys. Rev. Lett. 103, 130405 (2009)]. We show explicitly that the two leading terms of the low-temperature correction to the Casimir free energy of interaction between two plates, are identical to those pertaining to the Foucault current interaction alone, up to a correction which is very small for good metals. Moreover, a mode density along real frequencies is introduced, showing that the Casimir free energy, as given by the Lifshitz theory, separates in a natural manner in contributions from eddy currents and propagating cavity modes, respectively. The latter have long been known to be of little importance to the low-temperature Casimir anomalies. This convincingly demonstrates that eddy current modes are responsible for the large temperature correction to the Casimir effect between Drude metals, predicted by the Lifshitz theory, but not observed in experiments.

quant-ph↗

arXiv2010

Casimir effect at nonzero temperature for wedges and cylinders

We consider the Casimir-Helmholtz free energy at nonzero temperature $T$ for a circular cylinder and perfectly conducting wedge closed by a cylindrical arc, either perfectly conducting or isorefractive. The energy expression at nonzero temperature may be regularized to obtain a finite value, except for a singular corner term in the case of the wedge which is present also at zero temperature. Assuming the medium in the interior of the cylinder or wedge be nondispersive with refractive index $n$, the temperature dependence enters only through the non-dimensional parameter $2πnaT$, $a$ being the radius of the cylinder or cylindrical arc. We show explicitly that the known zero temperature result is regained in the limit $aT\to 0$ and that previously derived high temperature asymptotics for the cylindrical shell are reproduced exactly.

hep-th↗

arXiv2009

Transverse radiation force in a tailored optical fiber

We show, by means of simple model calculations, how a weak laser beam sent through an optical fiber exerts a transverse radiation force if there is an azimuthal asymmetry present in the fiber such that one side has a slightly different refractive index than the other. The refractive index difference $Δn$ needs only to be very small, of order $10^{-3}$, in order to produce an appreciable transverse displacement of order 10 microns. We argue that the effect has probably already been seen in a recent experiment of She et al. [Phys. Rev. Lett. 101, 243601 (2008)], and we discuss correspondence between these observations and the theory presented. The effect could be used to bend optical fibers in a predictable and controlled manner and we propose that it could be useful for micron-scale devices.

physics.optics↗

arXiv2008

Casimir Lifshitz pressure and free energy: exploring a simple model

The Casimir effect, the dispersion force attracting neutral objects to each other, may be understood in terms of multiple scattering of light between the interacting bodies. We explore the simple model in which the bodies are assumed to possess reflection coefficients independent of the energy and angle of incidence of an impinging field and show how a multitude of information can be extracted within the geometry of two parallel plates. The full thermal behaviour of the model is found and we discuss how non-analytic behaviour emerges in the combined limits of zero temperature and perfect reflection. Finally we discuss the possibility of a generalised force conjugate to the reflection coefficients of the interacting materials and how, if the materials involved were susceptible to changing their reflective properties, this would tend to enhance the Casimir attraction. The dependence of this correction on separation is studied for the constant reflection model, indicating that the effect is likely to be negligible under most experimental circumstances.

quant-ph↗