arXiv subjects

Simon Geisert

Publications and source records attributed to Simon Geisert.

10 recordsLinked to original sources

arXiv2025

Double-Pumped Kerr Parametric Amplifier Beyond the Gain-Bandwidth Limit

Superconducting standing$-$wave parametric amplifiers are crucial for the readout of microwave quantum devices. Despite significant improvements in recent years, the need to operate near an instability point imposes a fundamental constraint: the instantaneous bandwidth decreases with increasing amplifier gain. Here we show that it is possible to obtain parametric amplification without instability by using two simultaneous drives that activate phase-preserving gain and frequency conversion. Realized in a granular aluminum dimer with Kerr nonlinearity, our method demonstrates a sixfold bandwidth increase at 20 dB gain, surpasses the conventional gain$-$bandwidth scaling up to 25 dB, and remains near the quantum limit.

quant-ph↗

arXiv2025

Quantum Coherence in Superconducting Vortex States

Abrikosov vortices, where the superconducting gap is completely suppressed in the core, are dissipative, semi-classical entities that impact applications from high-current-density wires to superconducting quantum devices. In contrast, we present evidence that vortices trapped in granular superconducting films can behave as two-level systems, exhibiting microsecond-range quantum coherence and energy relaxation times that reach fractions of a millisecond. These findings support recent theoretical modeling of superconductors with granularity on the scale of the coherence length as tunnel junction networks, resulting in gapped vortices. Using the tools of circuit quantum electrodynamics, we perform coherent manipulation and quantum non-demolition readout of vortex states in granular aluminum microwave resonators, heralding new directions for quantum information processing, materials characterization, and sensing.

quant-ph↗

arXiv2025

Enabling full localization of qubits and gates with a multi-mode coupler

Tunable couplers are a key building block of superconducting quantum processors, enabling high on-off ratios for two-qubit entangling interactions. While qubit-qubit interaction can be turned off, residual wavefunctions delocalize single-qubit excitations over the device, yielding weak effective couplings that manifest as unintended crosstalk. Moreover, conventional single-mode couplers lack independent control over interactions in the one- and two-excitation manifolds, leading to unitary errors such as leakage during gate operations. Here, we propose a multi-mode tunable coupler that enforces complete localization, yielding near-perfect qubit isolation at the decoupled point. We further show that the additional degrees of freedom in the coupler enable independent and nonlinear control of effective interactions across distinct excitation manifolds, with large on-off ratios. This architecture provides a new route toward the next generation of couplers for scalable and high-fidelity gate operations in superconducting quantum processors.

quant-ph↗

arXiv2025

On-chip stencil lithography for superconducting qubits

Improvements in circuit design and more recently in materials and surface cleaning have contributed to a rapid development of coherent superconducting qubits. However, organic resists commonly used for shadow evaporation of Josephson junctions (JJs) pose limitations due to residual contamination, poor thermal stability and compatibility under typical surface-cleaning conditions. To provide an alternative, we developed an inorganic SiO$_2$/Si$_3$N$_4$ on-chip stencil lithography mask for JJ fabrication. The stencil mask is resilient to aggressive cleaning agents and it withstands high temperatures up to 1200{\deg}C, thereby opening new avenues for JJ material exploration and interface optimization. To validate the concept, we performed shadow evaporation of Al-based transmon qubits followed by stencil mask lift-off using vapor hydrofluoric acid, which selectively etches SiO$_2$. We demonstrate average $T_1 \approx 75 \pm 11 \mu$s over a 200 MHz frequency range in multiple cool-downs for one device, and $T_1 \approx 44\pm 8 \mu$s for a second device. These results confirm the compatibility of stencil lithography with state-of-the-art superconducting quantum devices and motivate further investigations into materials engineering, film deposition and surface cleaning techniques.

quant-ph↗

arXiv2025

High Impedance Granular Aluminum Ring Resonators

Superconducting inductors with impedance surpassing the resistance quantum, i.e., superinductors, are important for quantum technologies because they enable the development of protected qubits, enhance coupling to systems with small electric dipole moments, and facilitate the study of phase-slip physics. We demonstrate superinductors with densely packed meandered traces of granular aluminum (grAl) with inductances up to $4\,\mu\mathrm{H}$, achieving impedances exceeding $100\,\mathrm{k}\Omega$ in the $4-8\,\mathrm{GHz}$ range. Ring resonators made with grAl meandered superinductors exhibit quality factors on the order of $10^5$ in the single-photon regime and low non-linearity on the order of tens of $\mathrm{Hz}$. Depending on the grAl resistivity, at $10\,\mathrm{Hz}$, we measure frequency noise spectral densities in the range of $10^2$ to $10^3\,\mathrm{Hz}/\sqrt{\mathrm{Hz}}$. In some devices, in the single-photon regime, we observe a positive Kerr coefficient of unknown origin. Using more complex fabrication, the devices could be released from the substrate, either freestanding or suspended on a membrane, thereby further improving their impedance by a factor of three.

quant-ph↗

arXiv2025

Offset Charge Dependence of Measurement-Induced Transitions in Transmons

A key challenge in achieving scalable fault tolerance in superconducting quantum processors is readout fidelity, which lags behind one- and two-qubit gate fidelity. A major limitation in improving qubit readout is measurement-induced transitions, also referred to as qubit ionization, caused by multiphoton qubit-resonator excitation occurring at specific photon numbers. Since ionization can involve highly excited states, it has been predicted that in transmons -- the most widely used superconducting qubit -- the photon number at which measurement-induced transitions occur is gate charge dependent. This dependence is expected to persist deep in the transmon regime where the qubit frequency is gate charge insensitive. We experimentally confirm this prediction by characterizing measurement-induced transitions with increasing resonator photon population while actively stabilizing the transmon's gate charge. Furthermore, because highly excited states are involved, achieving quantitative agreement between theory and experiment requires accounting for higher-order harmonics in the transmon Hamiltonian.

quant-ph↗

arXiv2025

Low crosstalk modular flip-chip architecture for coupled superconducting qubits

We present a flip-chip architecture for an array of coupled superconducting qubits, in which circuit components reside inside individual microwave enclosures. In contrast to other flip-chip approaches, the qubit chips in our architecture are electrically floating, which guarantees a simple, fully modular assembly of capacitively coupled circuit components such as qubit, control, and coupling structures, as well as reduced crosstalk between the components. We validate the concept with a chain of three nearest neighbor coupled generalized flux qubits in which the center qubit acts as a frequency-tunable coupler. Using this coupler, we demonstrate a transverse coupling on/off ratio $\approx$ 50, zz-crosstalk $\approx$ 0.7 kHz between resonant qubits and isolation between the qubit enclosures > 60 dB.

quant-ph↗

arXiv2024

Pure kinetic inductance coupling for cQED with flux qubits

We demonstrate a qubit-readout architecture where the dispersive coupling is entirely mediated by a kinetic inductance. This allows us to engineer the dispersive shift of the readout resonator independent of the qubit and resonator capacitances. We validate the pure kinetic coupling concept and demonstrate various generalized flux qubit regimes from plasmon to fluxon, with dispersive shifts ranging from 60 kHz to 2 MHz at the half-flux quantum sweet spot. We achieve readout performances comparable to conventional architectures with quantum state preparation fidelities of 99.7 % and 92.7 % for the ground and excited states, respectively, and below 0.1 % leakage to non-computational states.

quant-ph↗

arXiv2024

Granular Aluminum Parametric Amplifier for Low-Noise Measurements in Tesla Fields

Josephson junction parametric amplifiers have become essential tools for microwave quantum circuit readout with minimal added noise. Even after improving at an impressive rate in the last decade, they remain vulnerable to magnetic field, which limits their use in many applications such as spin qubits, Andreev and molecular magnet devices, dark matter searches, etc. Kinetic inductance materials, such as granular aluminum (grAl), offer an alternative source of non-linearity with innate magnetic field resilience. We present a non-degenerate amplifier made of two coupled grAl resonators resilient to in-plane magnetic field up to 1 T. It offers 20 dB of gain close to the quantum limit of added noise, with a gain-bandwidth product of 28 MHz and -110 dBm input saturation power.

quant-ph↗

arXiv2023

Observation of Josephson Harmonics in Tunnel Junctions

Approaches to developing large-scale superconducting quantum processors must cope with the numerous microscopic degrees of freedom that are ubiquitous in solid-state devices. State-of-the-art superconducting qubits employ aluminum oxide (AlO$_x$) tunnel Josephson junctions as the sources of nonlinearity necessary to perform quantum operations. Analyses of these junctions typically assume an idealized, purely sinusoidal current-phase relation. However, this relation is only expected to hold in the limit of vanishingly low-transparency channels in the AlO$_x$ barrier. Here we show that the standard current-phase relation fails to accurately describe the energy spectra of transmon artificial atoms across various samples and laboratories. Instead, a mesoscopic model of tunneling through an inhomogeneous AlO$_x$ barrier predicts percent-level contributions from higher Josephson harmonics. By including these in the transmon Hamiltonian, we obtain orders of magnitude better agreement between the computed and measured energy spectra. The presence and impact of Josephson harmonics has important implications for developing AlO$_x$-based quantum technologies including quantum computers and parametric amplifiers. As an example, we show that engineered Josephson harmonics can reduce the charge dispersion and the associated errors in transmon qubits by an order of magnitude, while preserving their anharmonicity.

quant-ph↗