arXiv subjects

Simon Moser

Publications and source records attributed to Simon Moser.

32 records · Page 2Linked to original sources

arXiv2022

On-chip beam rotators, adiabatic mode converters, and waveplates through low-loss waveguides with variable cross-sections

Photonics integrated circuitry would benefit considerably from the ability to arbitrarily control waveguide cross-sections with high precision and low loss, in order to provide more degrees of freedom in manipulating propagating light. Here, we report a new method for femtosecond laser writing of optical-fibre-compatible glass waveguides, namely spherical phase induced multi-core waveguide (SPIM-WG), which addresses this challenging task with three dimensional on-chip light control. Fabricating in the heating regime with high scanning speed, precise deformation of cross-sections is still achievable along the waveguide, with shapes and sizes finely controllable of high resolution in both horizontal and vertical transversal directions. We observed that these waveguides have high refractive index contrast of 0.017, low propagation loss of 0.14 dB/cm, and very low coupling loss of 0.19 dB coupled from a single mode fibre. SPIM-WG devices were easily fabricated that were able to perform on-chip beam rotation through varying angles, or manipulate polarization state of propagating light for target wavelengths. We also demonstrated SPIM-WG mode converters that provide arbitrary adiabatic mode conversion with high efficiency between symmetric and asymmetric non-uniform modes; examples include circular, elliptical modes and asymmetric modes from ppKTP (periodically-poled potassium titanyl phosphate) waveguides which are generally applied in frequency conversion and quantum light sources. Created inside optical glass, these waveguides and devices have the capability to operate across ultra-broad bands from visible to infrared wavelengths. The compatibility with optical fibre also paves the way toward packaged photonic integrated circuitry, which usually needs input and output fibre connections.

physics.optics↗

arXiv2022

Hydroelastomers: soft, tough, highly swelling composites

Inspired by the cellular design of plant tissue, we present a new approach to make versatile, tough, highly water-swelling composites. We embed highly swelling hydrogel particles inside tough, water-permeable, elastomeric matrices. The resulting composites, which we call \emph{hydroelastomers}, show little softening as they swell, and have excellent fracture properties that match those of the best-performing, tough hydrogels. Our composites are straightforward to fabricate, based on commercial materials, and can easily be molded or extruded to form shapes with complex swelling geometries. Furthermore, there is a large design space available for making hydroelastomers, since one can use any hydrogel as the dispersed phase in the composite, including hydrogels with stimuli-responsiveness. These features should make hydroelastomers excellent candidates for use in soft robotics and swelling-based actuation, or as shape-morphing materials, while also being useful as hydrogel replacements in a wide range of other fields.

cond-mat.soft↗

arXiv2022

The Huygens Principle of Angle-Resolved Photoemission

Angle-resolved photoemission spectroscopy (ARPES) measures the interference of dipole allowed Coulomb wavelets from the individual orbital emitters that contribute to an electronic band. If Coulomb scattering of the outgoing electron is neglected, this Huygens view of ARPES simplifies to a Fraunhofer diffraction experiment, and the relevant cross-sections to orbital Fouriertransforms. This plane wave approximation (PWA) is surprisingly descriptive of photoelectron distributions, but fails to reproduce kinetic energy dependent final state effects like dichroism. Yet, Huygens principle of ARPES can be easily adapted to allow for distortion and phase shift of the outgoing Coulomb wave. This retains the strong physical intuition and low computational cost of the PWA, but naturally captures momentum dependent interference effects in systems that so far required treatment at the ab initio level, such as linear dichroism in Rashba systems BiAg2 and AgTe.

cond-mat.mtrl-sci↗

arXiv2021

Design and realization of topological Dirac fermions on a triangular lattice

Large-gap quantum spin Hall insulators are promising materials for room-temperature applications based on Dirac fermions. Key to engineer the topologically non-trivial band ordering and sizable band gaps is strong spin-orbit interaction. Following Kane and Mele's original suggestion, one approach is to synthesize monolayers of heavy atoms with honeycomb coordination accommodated on templates with hexagonal symmetry. Yet, in the majority of cases, this recipe leads to triangular lattices, typically hosting metals or trivial insulators. Here, we conceive and realize "indenene", a triangular monolayer of indium on SiC exhibiting non-trivial valley physics driven by local spin-orbit coupling, which prevails over inversion-symmetry breaking terms. By means of tunneling microscopy of the 2D bulk we identify the quantum spin Hall phase of this triangular lattice and unveil how a hidden honeycomb connectivity emerges from interference patterns in Bloch $p_x \pm ip_y$-derived wave functions.

cond-mat.mtrl-sci↗

arXiv2020

Photo-physics and electronic structure of lateral graphene/MoS2 and metal/MoS2 junctions

Integration of semiconducting transition metal dichalcogenides (TMDs) into functional optoelectronic circuitries requires an understanding of the charge transfer across the interface between the TMD and the contacting material. Here, we use spatially resolved photocurrent microscopy to demonstrate electronic uniformity at the epitaxial graphene/molybdenum disulfide (EG/MoS2) interface. A 10x larger photocurrent is extracted at the EG/MoS2 interface when compared to metal (Ti/Au) /MoS2 interface. This is supported by semi-local density-functional theory (DFT), which predicts the Schottky barrier at the EG/MoS2 interface to be ~2x lower than Ti/MoS2. We provide a direct visualization of a 2D material Schottky barrier through combination of angle resolved photoemission spectroscopy with spatial resolution selected to be ~300 nm (nano-ARPES) and DFT calculations. A bending of ~500 meV over a length scale of ~2-3 micrometer in the valence band maximum of MoS2 is observed via nano-ARPES. We explicate a correlation between experimental demonstration and theoretical predictions of barriers at graphene/TMD interfaces. Spatially resolved photocurrent mapping allows for directly visualizing the uniformity of built-in electric fields at heterostructure interfaces, providing a guide for microscopic engineering of charge transport across heterointerfaces. This simple probe-based technique also speaks directly to the 2D synthesis community to elucidate electronic uniformity at domain boundaries alongside morphological uniformity over large areas.

physics.app-ph↗

arXiv2019

Topological electronic structure and intrinsic magnetization in MnBi$_4$Te$_7$: a Bi$_2$Te$_3$-derivative with a periodic Mn sublattice

Combinations of non-trivial band topology and long-range magnetic order hold promise for realizations of novel spintronic phenomena, such as the quantum anomalous Hall effect and the topological magnetoelectric effect. Following theoretical advances material candidates are emerging. Yet, a compound with a band-inverted electronic structure and an intrinsic net magnetization remains unrealized. MnBi$_2$Te$_4$ is a candidate for the first antiferromagnetic topological insulator and the progenitor of a modular (Bi$_2$Te$_3$)$_n$(MnBi$_2$Te$_4$) series. For $n$ = 1, we confirm a non-stoichiometric composition proximate to MnBi$_4$Te$_7$ and establish an antiferromagnetic state below 13 K followed by a state with net magnetization and ferromagnetic-like hysteresis below 5 K. Angle-resolved photoemission experiments and density-functional calculations reveal a topological surface state on the MnBi$_4$Te$_7$(0001) surface, analogous to the non-magnetic parent compound Bi$_2$Te$_3$. Our results render MnBi$_4$Te$_7$ as a band-inverted material with an intrinsic net magnetization and a complex magnetic phase diagram providing a versatile platform for the realization of different topological phases.

cond-mat.mtrl-sci↗

arXiv2019

Orbital-driven Rashba effect in a binary honeycomb monolayer AgTe

The Rashba effect is fundamental to the physics of two-dimensional electron systems and underlies a variety of spintronic phenomena. It has been proposed that the formation of Rashba-type spin splittings originates microscopically from the existence of orbital angular momentum (OAM) in the Bloch wave functions. Here, we present detailed experimental evidence for this OAM-based origin of the Rashba effect by angle-resolved photoemission (ARPES) and two-photon photoemission (2PPE) experiments for a monolayer AgTe on Ag(111). Using quantitative low-energy electron diffraction (LEED) analysis we determine the structural parameters and the stacking of the honeycomb overlayer with picometer precision. Based on an orbital-symmetry analysis in ARPES and supported by first-principles calculations, we unequivocally relate the presence and absence of Rashba-type spin splittings in different bands of AgTe to the existence of OAM.

cond-mat.mtrl-sci↗

arXiv2019

The Dirac nodal line network in non-symmorphic rutile semimetal RuO$_2$

We employ angle resolved photoemission spectroscopy (ARPES) to investigate the Fermi surface of RuO$_2$. We find a network of two Dirac nodal lines (DNL) as previously predicted in theory, where the valence- and conduction bands touch along continuous lines in momentum space. In addition, we find evidence for a third DNL close to the Fermi level which appears robust despite the presence of significant spin orbit coupling. We demonstrate that the third DNL gives rise to a topologically trivial flat-band surface state (FBSS) at the (110) surface. This FBSS can be tuned by surface doping and presents an interesting playground for the study of surface chemistry and exotic correlation phenomena.

cond-mat.mes-hall↗

arXiv2019

Accurate modeling of the fringing field effect in liquid crystal based spatial light modulators

Liquid crystal based spatial light modulators are widely used in applied optics due to their ability to continuously modulate the phase of a light field with very high spatial resolution. A common problem in these devices is the pixel crosstalk, also called the fringing field effect, which causes the response of these devices to deviate from the ideal behavior. This fringing effect decreases the performance of the spatial light modulator and is shown to cause an asymmetry in the diffraction efficiency between positive and negative diffraction orders. We use simulations of the director distribution to reproduce diffraction efficiency measurements of binary and blazed gratings. To overcome these limitations in performance, the simulations of the director distribution in the liquid crystal layer are used to develop a fast and precise model to compute the phase response of the spatial light modulator. To compensate the fringing field effect, we implement this model in phase retrieval algorithms and calculate the phase profile corresponding to a regular spot pattern as a generic example. With this method, we are able to increase the spot uniformity significantly compared to a calculation without considering the fringing field effect. Additionally, polarization conversion efficiencies of various simple phase patterns are simulated and measured for different orientations of the spatial light modulator. We found that the polarization conversion has the the smallest effect for a setup in which the liquid crystal molecules at the alignment layer lie in the plane of incidence of the light beam.

physics.optics↗

arXiv2019

Non-trivial topological valence bands of common diamond and zinc-blende semiconductors

The diamond and zinc-blende semiconductors are well-known and have been widely studied for decades. Yet, their electronic structure still surprises with unexpected topological properties of the valence bands. In this joint theoretical and experimental investigation we demonstrate for the benchmark compounds InSb and GaAs that the electronic structure features topological surface states below the Fermi energy. Our parity analysis shows that the spin-orbit split-off band near the valence band maximum exhibits a strong topologically non-trivial behavior characterized by the $\mathcal{Z}_2$ invariants $(1;000)$. The non-trivial character emerges instantaneously with non-zero spin-orbit coupling, in contrast to the conventional topological phase transition mechanism. \textit{Ab initio}-based tight-binding calculations resolve topological surface states in the occupied electronic structure of InSb and GaAs, further confirmed experimentally by soft X-ray angle-resolved photoemission from both materials. Our findings are valid for all other materials whose valence bands are adiabatically linked to those of InSb, i.e., many diamond and zinc-blende semiconductors, as well as other related materials, such as half-Heusler compounds.

cond-mat.mtrl-sci↗

arXiv2018

Electronic Structure of Exfoliated and Epitaxial Hexagonal Boron Nitride

Hexagonal boron nitride (hBN) is an essential component in van der Waals heterostructures as it provides high quality and weakly interacting interfaces that preserve the electronic properties of adjacent materials. While exfoliated flakes of hBN have been extensively studied using electron transport and optical probes, detailed experimental measurements of the energy- and momentum- dependent electronic excitation spectrum are lacking. Here, we directly determine the full valence band (VB) electronic structure of micron-sized exfoliated flakes of hBN using angle-resolved photoemission spectroscopy with micrometer spatial resolution. We identify the π- and σ-band dispersions, the hBN stacking order and determine a total VB bandwidth of 19.4 eV. We compare these results with electronic structure data for epitaxial hBN on graphene on silicon carbide grown in situ using a borazine precursor. The epitaxial growth and electronic properties are investigated using photoe- mission electron microscopy. Our measurements show that the fundamental electronic properties of hBN are highly dependent on the fabrication strategy.

cond-mat.mtrl-sci↗

arXiv2018

Giant spin-splitting and gap renormalization driven by trions in single-layer WS$_2$/h-BN heterostructures

In two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs), new electronic phenomena such as tunable band gaps and strongly bound excitons and trions emerge from strong many-body effects, beyond spin-orbit coupling- and lattice symmetry-induced spin and valley degrees of freedom. Combining single-layer (SL) TMDs with other 2D materials in van der Waals heterostructures offers an intriguing means of controlling the electronic properties through these many-body effects via engineered interlayer interactions. Here, we employ micro-focused angle-resolved photoemission spectroscopy (microARPES) and in-situ surface doping to manipulate the electronic structure of SL WS$_2$ on hexagonal boron nitride (WS$_2$/h-BN). Upon electron doping, we observe an unexpected giant renormalization of the SL WS$_2$ valence band (VB) spin-orbit splitting from 430~meV to 660~meV, together with a band gap reduction of at least 325~meV, attributed to the formation of trionic quasiparticles. These findings suggest that the electronic, spintronic and excitonic properties are widely tunable in 2D TMD/h-BN heterostructures, as these are intimately linked to the quasiparticle dynamics of the materials.

cond-mat.mtrl-sci↗

arXiv2017

Strongly bound excitons in anatase TiO2 single crystals and nanoparticles

Anatase TiO$_2$ is among the most studied materials for light-energy conversion applications, but the nature of its fundamental charge excitations is still unknown. Yet it is crucial to establish whether light absorption creates uncorrelated electron-hole pairs or bound excitons and, in the latter case, to determine their character. Here, by combining steady-state angle-resolved photoemission spectroscopy and spectroscopic ellipsometry with state-of-the-art ab initio calculations, we demonstrate that the direct optical gap of single crystals is dominated by a strongly bound exciton rising over the continuum of indirect interband transitions. This exciton possesses an intermediate character between the Wannier-Mott and Frenkel regimes and displays a peculiar two-dimensional wavefunction in the three-dimensional lattice. The nature of the higher-energy excitations is also identified. The universal validity of our results is confirmed up to room temperature by observing the same elementary excitations in defect-rich samples (doped single crystals and nanoparticles) via ultrafast two-dimensional deep-ultraviolet spectroscopy.

cond-mat.mtrl-sci↗

arXiv2016

Non-Zhang-Rice singlet character of the first ionization state of T-CuO

We argue that tetragonal CuO (T-CuO) has the potential to finally settle long-standing modelling issues for cuprate physics. We compare the one-hole quasiparticle (qp) dispersion of T-CuO to that of cuprates, in the framework of the strongly-correlated ($U_{dd}\rightarrow \infty$) limit of the three-band Emery model. Unlike in CuO$_2$, magnetic frustration in T-CuO breaks the $C_4$ rotational symmetry and leads to strong deviations from the Zhang-Rice singlet picture in parts of the reciprocal space. Our results are consistent with angle-resolved photoemission spectroscopy data but in sharp contradiction to those of a one-band model previously suggested for them. These differences identify T-CuO as an ideal material to test a variety of scenarios proposed for explaining cuprate phenomenology.

cond-mat.str-el↗