arXiv subjects

Simon Settele

Publications and source records attributed to Simon Settele.

12 recordsLinked to original sources

arXiv2025

Ultrashort Carbon Nanotubes with Luminescent Color Centers are Bright NIR-II Nano-Emitters

In the fields of bioimaging, photonics, and quantum science, it is equally crucial to combine high brightness with nanoscale size in short-wave infrared (SWIR) emitters. However, such nano-emitters are currently lacking. Here, we report that when functionalized with luminescent color centers, ultrashort carbon nanotubes with length much shorter than 100 nm, are surprisingly bright in the near-infrared second-biological window (NIR-II) of the SWIR domain. We discuss the origin of this exceptional brightness based on the uncontrollable presence of quenching defects in dispersed carbon nanotubes. We further investigate the nonlinear photoluminescence behavior of color centers functionalized carbon nanotubes in response to varying excitation conditions, spanning from ensemble measurements to single-nanotube experiments. We discuss how this behavior influences the determination of their photoluminescence quantum yields, which can reach values as high as 20% for ultrashort ones detected at the single nanotube level. Notably, the corresponding NIR-II brightness exceeds that of well-known visible emitters, including quantum dots. After rendering them biocompatible, we demonstrate point-spread function engineering and high-resolution, 3-dimensional single-particle tracking using these bright ultrashort carbon nanotubes allowing nanoscale imaging in the NIR-II window within thick brain tissue.

cond-mat.mtrl-sci↗

arXiv2024

How to Recognize Clustering of Luminescent Defects in Single-Wall Carbon Nanotubes

Semiconducting single-wall carbon nanotubes (SWCNTs) are a promising material platform for near-infrared in-vivo imaging, optical sensing, and single-photon emission at telecommunication wavelengths. The functionalization of SWCNTs with luminescent defects can lead to significantly enhanced photoluminescence (PL) properties due to efficient trapping of highly mobile excitons and red-shifted emission from these trap states. Among the most studied luminescent defect types are oxygen and aryl defects that have largely similar optical properties. So far, no direct comparison between SWCNTs functionalized with oxygen and aryl defects under identical conditions has been performed. Here, we employ a combination of spectroscopic techniques to quantify the number of defects, their distribution along the nanotubes and thus their exciton trapping efficiencies. The different slopes of Raman D/G+ ratios versus calculated defect densities from PL quantum yield measurements indicate substantial dissimilarities between oxygen and aryl defects. Supported by statistical analysis of single-nanotube PL spectra at cryogenic temperatures it reveals clustering of oxygen defects. The clustering of 2-3 oxygen defects, which act as a single exciton trap, occurs irrespective of the functionalization method and thus enables the use of simple equations to determine the density of oxygen defects and oxygen defect clusters in SWCNTs based on standard Raman spectroscopy. The presented analytical approach is a versatile and sensitive tool to study defect distribution and clustering in SWCNTs and can be applied to any new functionalization method.

cond-mat.mtrl-sci↗

arXiv2024

Easy Access to Bright Oxygen Defects in Biocompatible Single-Walled Carbon Nanotubes via a Fenton-Like Reaction

The covalent functionalization of single-walled carbon nanotubes (SWNTs) with luminescent oxygen defects increases their brightness and enables their application as optical biosensors or fluorescent probes for in-vivo imaging in the second-biological window (NIR-II). However, obtaining luminescent defects with high brightness is challenging with the current functionalization methods due to a restricted window of reaction conditions or the necessity for controlled irradiation with ultraviolet light. Here we report a method for introducing luminescent oxygen defects via a Fenton-like reaction that uses benign and inexpensive chemicals without light irradiation. (6,5) SWNTs in aqueous dispersion functionalized with this method show bright $E_{11}$* emission (1105 nm) with 3.2-times higher peak intensities than the pristine $E_{11}$ emission and a reproducible photoluminescence quantum yield of 3%. The functionalization can be performed within a wide range of reaction parameters and even with unsorted nanotube raw material at high concentrations (100 mg/L), giving access to large amounts of brightly luminescent SWNTs. We further find that the introduced oxygen defects rearrange under light irradiation, which gives additional insights into the structure and dynamics of oxygen defects. Finally, the functionalization of ultra-short SWNTs with oxygen defects also enables high photoluminescence quantum yields and their excellent emission properties are retained after surfactant exchange with biocompatible pegylated phospholipids or single-stranded DNA to make them suitable for in-vivo NIR-II imaging and dopamine sensing.

cond-mat.mtrl-sci↗

arXiv2024

Photo-Activated, Solid-State Introduction of Luminescent Oxygen Defects into Semiconducting Single-Walled Carbon Nanotubes

Oxygen defects in semiconducting single-walled carbon nanotubes (SWCNTs) are localized disruptions in the carbon lattice caused by the formation of epoxy or ether groups, commonly through wet-chemical reactions. The associated modifications of the electronic structure can result in luminescent states with emission energies below those of pristine SWCNTs in the near-infrared range, which makes them promising candidates for applications in biosensing and as single-photon emitters. Here, we demonstrate the controlled introduction of luminescent oxygen defects into networks of monochiral (6,5) SWCNTs using a solid-state photocatalytic approach. UV irradiation of SWCNTs on the photoreactive surfaces of the transition metal oxides TiOx and ZnOx in the presence of trace amounts of water and oxygen results in the creation of reactive oxygen species that initiate radical reactions with the carbon lattice and the formation of oxygen defects. The created ether-d and epoxide-l defect configurations give rise to two distinct red-shifted emissive features. The chemical and dielectric properties of the photoactive oxides influence the final defect emission properties, with oxygen-functionalized SWCNTs on TiOx substrates being brighter than those on ZnOx or pristine SWCNTs on glass. The photoinduced functionalization of nanotubes is further employed to create lateral patterns of oxygen defects in (6,5) SWCNT networks with micrometer resolution and thus spatially controlled defect emission.

physics.app-ph↗

arXiv2024

Ratiometric fluorescent sensing of pyrophosphate with sp$^{3}$-functionalized single-walled carbon nanotubes

Inorganic pyrophosphate is a key molecule in many biological processes from DNA synthesis to cell metabolism. Here we introduce sp$^{3}$-functionalized (6,5) single-walled carbon nanotubes (SWNTs) with red-shifted defect emission as near-infrared luminescent probes for the optical detection and quantification of inorganic pyrophosphate. The sensing scheme is based on the immobilization of Cu$^{2+}$ ions on the SWNT surface promoted by coordination to covalently attached aryl alkyne groups and a triazole complex. The presence of Cu$^{2+}$ ions on the SWNT surface causes fluorescence quenching via photoinduced electron transfer, which is reversed by copper-complexing analytes such as pyrophosphate. The differences in the fluorescence response of sp$^{3}$-defect to pristine nanotube emission enables reproducible ratiometric measurements in a wide concentration window. Biocompatible, phospholipid-polyethylene glycol-coated SWNTs with such sp$^{3}$ defects are employed for the detection of pyrophosphate in cell lysate and for monitoring the progress of DNA synthesis in a polymerase chain reaction. This robust ratiometric and near-infrared luminescent probe for pyrophosphate may serve as a starting point for the rational design of nanotube-based biosensors.

physics.app-ph↗

arXiv2023

A Hands-On Guide to Shear Force Mixing of Single-Walled Carbon Nanotubes with Conjugated Polymers

This guide provides a detailed step-by-step procedure for the dispersion of (6,5) single-walled carbon nanotubes by shear force mixing with the conjugated polymer PFO-BPy in organic solvents. All processes presented here were developed in the Zaumseil group at Heidelberg University since 2015 and represent best practices to the best of our knowledge. In addition to the detailed instructions, we discuss potential pitfalls and problems, that we have encountered over eight years of operation and show how to solve them. This also includes a detailed description of how to maintain and service a shear force mixer to ensure long operation lifetime. Finally, we show how to expand our process to the dispersion other nanotube chiralities in electronic-grade quality and how to treat dispersions for subsequent processing (e.g., thin film deposition or functionalization).

physics.app-ph↗

arXiv2023

Unified Quantification of Quantum Defects in Small-Diameter Single-Walled Carbon Nanotubes by Raman Spectroscopy

The covalent functionalization of single-walled carbon nanotubes (SWCNTs) with luminescent quantum defects enables their application as near-infrared single-photon sources, as optical sensors, and for in-vivo tissue imaging. Tuning the emission wavelength and defect density are crucial for these applications. While the former can be controlled by different synthetic protocols and is easily measured, defect densities are still determined as relative rather than absolute values, limiting the comparability between different nanotube batches and chiralities. Here, we present an absolute and unified quantification metric for the defect density in SWCNT samples based on Raman spectroscopy. It is applicable to a range of small-diameter nanotubes and for arbitrary laser wavelengths. We observe a clear inverse correlation of the D/G$^{+}$ ratio increase with nanotube diameter, indicating that curvature effects contribute significantly to the defect-activation of Raman modes. Correlation of intermediate frequency modes with defect densities further corroborates their activation by defects and provides additional quantitative metrics for the characterization of functionalized SWCNTs.

cond-mat.mtrl-sci↗

arXiv2023

Tuning Electroluminescence from Functionalized SWCNT Networks further into the Near-Infrared

Near-infrared electroluminescence from carbon-based emitters, especially in the second biological window (NIR-II) or at telecommunication wavelengths, is difficult to achieve. Single-walled carbon nanotubes (SWCNTs) have been proposed as a possible solution due to their tunable and narrowband emission in the near-infrared and high charge carrier mobilities. Furthermore, the covalent functionalization of SWCNTs with a controlled number of luminescent sp$^{3}$ defects leads to even more red-shifted photoluminescence with enhanced quantum yields. Here, we demonstrate that by tailoring the binding configuration of the introduced sp$^{3}$ defects and hence tuning their optical trap depth we can generate emission from polymer-sorted (6,5) and (7,5) nanotubes that is mainly occurring in the telecommunication O-band (1260-1360 nm). Networks of these functionalized nanotubes are integrated in ambipolar, light-emitting field-effect transistors to yield the corresponding narrowband near-infrared electroluminescence. Further investigation of the current and carrier density-dependent electro- and photoluminescence spectra enable insights into the impact of different sp$^{3}$ defects on charge transport in networks of functionalized SWCNTs.

physics.app-ph↗

arXiv2023

Understanding the optical properties of doped and undoped 9-armchair graphene nanoribbons in dispersion

Graphene nanoribbons are one-dimensional stripes of graphene with width- and edge-structure-dependent electronic properties. They can be synthesized bottom-up in solution to obtain precise ribbon geometries. Here we investigate the optical properties of solution-synthesized 9-armchair graphene nanoribbons (9-aGNRs) that are stabilized as dispersions in organic solvents and further fractioned by liquid cascade centrifugation (LCC). Absorption and photoluminescence spectroscopy reveal two near-infrared absorption and emission peaks whose ratios depend on the LCC fraction. Low-temperature single-nanoribbon photoluminescence spectra suggest the presence of two different nanoribbon species. Based on density functional theory (DFT) and time-dependent DFT calculations, the lowest energy transition can be assigned to pristine 9-aGNRs, while 9-aGNRs with edge-defects, caused by incomplete graphitization, result in more blue-shifted transitions and higher Raman D/G-mode ratios. Hole doping of 9-aGNR dispersions with the electron acceptor F4TCNQ leads to concentration dependent bleaching and quenching of the main absorption and emission bands and the appearance of redshifted, charge-induced absorption features but no additional emission peaks, thus indicating the formation of polarons instead of the predicted trions (charged excitons) in doped 9-aGNRs.

cond-mat.mtrl-sci↗

arXiv2023

Near-Intrinsic Photo- and Electroluminescence from Single-Walled Carbon Nanotube Thin Films on BCB-Passivated Surfaces

Their outstanding electrical and optical properties make semiconducting single-walled carbon nanotubes (SWCNTs) highly suitable for charge transport and emissive layers in near-infrared optoelectronic devices. However, the luminescence spectra of SWCNT thin films on commonly used glass and Si/SiO2 substrates are often compromised by broadening of the main excitonic emission and unwanted low-energy sidebands. Surface passivation with a commercially available, low dielectric constant, cross-linked bis-benzocyclobutene-based polymer (BCB) enhances the emission properties of SWCNTs to the same level as hexagonal boron nitride (h-BN) flakes do. The presence of BCB suppresses sideband emission, especially from the Y1 band, which is attributed to defects introduced by the interaction of the nanotube lattice with oxygen-containing terminal groups of the substrate surface. The facile and reproducible deposition of homogeneous BCB films over large areas combined with their resistance against common solvents and chemicals employed during photolithography make them compatible with standard semiconductor device fabrication. Utilizing this approach, light-emitting (6,5) SWCNT network field-effect transistors are fabricated on BCB-treated glass substrates with excellent electrical characteristics and near-intrinsic electroluminescence. Hence, passivation with BCB is proposed as a standard treatment for substrates used for spectroscopic investigations of and optoelectronic devices with SWCNTs and other low-dimensional emitters.

physics.app-ph↗

arXiv2022

Absolute Quantification of sp$^{3}$ Defects in Semiconducting Single-Wall Carbon Nanotubes by Raman Spectroscopy

The functionalization of semiconducting single-wall carbon nanotubes (SWCNTs) with luminescent sp$^{3}$ defects creates red-shifted emission features in the near-infrared and boosts their photoluminescence quantum yields (PLQYs). While multiple synthetic routes for the selective introduction of sp$^{3}$ defects have been developed, a convenient metric to precisely quantify the number of defects on a SWCNT lattice is not available. Here, we present a direct and simple quantification protocol based on a linear correlation of the integrated Raman D/G$^{+}$ signal ratios and defect densities as extracted from PLQY measurements. Corroborated by a statistical analysis of single-nanotube emission spectra at cryogenic temperature, this method enables the quantitative evaluation of sp$^{3}$ defect densities in (6,5) SWCNTs with an error of $\pm$ 3 defects per micrometer and the determination of oscillator strengths for different defect types. The developed protocol requires only standard Raman spectroscopy and is independent of the defect configuration, dispersion solvent and nanotube length.

cond-mat.mtrl-sci↗

arXiv2021

Interaction of Luminescent Defects in Carbon Nanotubes with Covalently Attached Stable Organic Radicals

The functionalization of single-walled carbon nanotubes (SWCNTs) with luminescent sp$^{3}$ defects has greatly improved their performance in applications such as quantum light sources and bioimaging. Here, we report the covalent functionalization of purified semiconducting SWCNTs with stable organic radicals (perchlorotriphenylmethyl, PTM) carrying a net spin. This model system allows us to use the near-infrared photoluminescence arising from the defect-localized exciton as a highly sensitive probe for the short-range interaction between the PTM radical and the SWCNT. Our results point toward an increased triplet exciton population due to radical-enhanced intersystem crossing, which could provide access to the elusive triplet manifold in SWCNTs. Furthermore, this simple synthetic route to spin-labeled defects could enable magnetic resonance studies complementary to in vivo fluorescence imaging with functionalized SWCNTs and facilitate the scalable fabrication of spintronic devices with magnetically switchable charge transport.

cond-mat.mtrl-sci↗