arXiv subjects

Simone Cialdi

Publications and source records attributed to Simone Cialdi.

At least 19 recordsLinked to original sources

arXiv2026

A Simple and Robust Balanced Homodyne Detector for High-Repetition-Rate Pulsed Sources

We design and experimentally characterize a balanced homodyne detector optimized for high-repetition-rate (100 MHz) pulsed optical sources. Unlike conventional transimpedance-amplifier architectures, which suffer from nonlinearities and dynamic instabilities with ultrashort pulses, our approach allows to directly amplify the photocurrent extracted at the common photodiode node without feedback loops. A theoretical model describing the detector response, noise, and pulse-to-pulse correlations is developed, providing quantitative predictions for the signal variance, signal-to-noise ratio (SNR), and inter-pulse correlations. Implemented with two matched InGaAs photodiodes illuminated by a 1030 nm mode-locked laser at 100 MHz, the detector exhibits excellent linearity and shot-noise-limited scaling of the signal variance with optical power. Optimizing the temporal integration window yields a maximum SNR of about 14 dB, while correlation measurements confirm negligible inter-pulse correlations. These results demonstrate that the proposed architecture offers a robust and simple solution for high-speed pulsed homodyne detection, suitable for quantum optics and continuous-variable quantum information applications.

physics.optics↗

arXiv2026

Experimental investigation of the effect of dispersion on squeezing generation in a synchronously pumped optical parametric oscillator

An experimental investigation of intracavity dispersion effects in a synchronously pumped optical parametric oscillator (SPOPO) is presented. A flexible setup combining spectral and phase shaping of both pump and local oscillator fields with frequency-resolved balanced homodyne detection is employed to examine how intracavity dispersion influences squeezing. Different cavity configurations with varying finesse and dispersion conditions are studied, and the squeezing is measured as a function of pump power and local oscillator bandwidth. Contrary to expectations based on existing theoretical models, the measured squeezing levels remain essentially unchanged as dispersion varies. To account for these observations, a modeling approach is introduced in which intracavity dispersion is described as an effective spectral filtering occurring at the stage of SPOPO supermode generation. Within this framework, the filtering is incorporated directly into the interaction Hamiltonian of the nonlinear process. This perspective establishes a consistent experimental benchmark for the study of dispersion in SPOPOs and underscores the importance of spectral filtering in the interpretation of multimode squeezing experiments.

physics.optics↗

arXiv2025

Generation and detection of squeezed states via a synchronously pumped optical parametric oscillator

A synchronously pumped optical parametric oscillator (SPOPO) operating at 93 MHz is used to generate squeezed states at 1035 nm. The system features a counter-propagating beam at the same wavelength as the quantum state, which simultaneously actively stabilizes the cavity and, after transmission, acts as the local oscillator for homodyne detection. By deriving the local oscillator directly from the SPOPO cavity, the setup establishes an intrinsically excellent spatial mode overlap and high interference visibility, forming a distinctive self-referenced architecture. Two spatial light modulators enable precise spectral shaping of both the pump and the local oscillator in amplitude and phase, allowing investigation of the spectral properties of the generated states. The versatility of the setup further allows exploration of different SPOPO configurations, including regimes with varied finesse and escape efficiency. Representative measurements, including homodyne traces and squeezing levels as functions of pump power and local oscillator bandwidth, demonstrate the performance of the system. Theoretical simulations based on a multimode singular-value-decomposition model reproduce well the measured dependence of squeezing on pump power and LO bandwidth, confirming the accuracy of the description and the robustness of the setup. Measured squeezing levels up to -3.3 dB are achieved, corresponding to -5.7 dB at SPOPO output, evidencing the robustness and versatility of this platform for stable pulsed squeezed-light generation and advanced quantum optical applications.

quant-ph↗

arXiv2025

A minimalist self-differencing gating scheme for dead-time-free single-photon avalanche diodes at high repetition rate

Gated quenched SPAD detectors are widely used in quantum communication and quantum computing setups employing high-repetition-rate lasers. Here, we present a novel scheme for high-repetition-rate (100 MHz) sine-wave gated SPADs, based on the self-differencing technique, which significantly simplifies previous designs while offering additional advantages. These include straightforward implementation, more precise control of the SPAD biasing, and an improved SNR. We implemented this approach using an InGaAs photodiode and characterized it experimentally with 100 MHz attenuated laser pulses, measuring quantum efficiency, dark count rate, and afterpulsing behavior. Importantly, we demonstrate that the detector recovers full quantum efficiency in less than one pulse-repetition period after a detection event, enabling continuous operation at 100 MHz, which, in principle, could reach the GHz regime.

quant-ph↗

arXiv2025

Measuring spatial coherence of quantum and classical light with an ultrastable monolithic interferometer

We describe a monolithic interferometer for spatial coherence measurements of both classical and quantum light sources. The design combines parametric down-conversion with a thermal source, using two identical calcite crystals to control beam alignment via birefringence. The monolithic structure ensures inherent stability. Spatial coherence is measured through temporal interferograms and spectral analysis, with both methods showing close agreement with theoretical predictions. The system is robust and performs reliably for both quantum and classical light. Its design enables automated, rapid coherence measurements across different source types.

quant-ph↗

arXiv2025

Ytterbium-laser-driven THz generation in thin lithium niobate at 1.9 kW average power in a passive enhancement cavity

Single-cycle, high-power, high-repetition-rate THz pulse sources are becoming the cornerstone of several scientific and industrial applications. A promising and versatile method for high-power THz generation is optical rectification in nonlinear crystals pumped by powerful near-infrared ultrafast laser systems. In this context, ytterbium-based laser sources are particularly advantageous in terms of power scalability and technology establishment. However, as the repetition rate increases toward hundreds of MHz, the conversion efficiency typically decreases, as most laser systems do not reach sufficiently high average power to correspondingly enhance the peak power to drive the nonlinear conversion process efficiently. An alternative approach to achieving sufficiently high average power at high repetition rate is based on passive enhancement cavities, which boost the pulse energy of standard watt-level ytterbium lasers by orders of magnitude. We present the first demonstration of optical rectification in a passive enhancement cavity at multi-kW levels, achieved by a 240-fold power enhancement. By irradiating a 50-$\mu$m thin lithium niobate plate with 1.9-kW average power inside the enhancement cavity, we generate milliwatt-level THz pulses with 2-THz bandwidth and 93-MHz repetition rate, mostly limited by the driving pulse duration. To the best of our knowledge, this represents the highest driving average power used for OR. This methodology represents a promising new step towards high-repetition-rate and high average power single-cycle THz sources using widely available multi-watt level Yb lasers.

physics.optics↗

arXiv2023

Local discrimination of orbital angular momentum in entangled states

We address the use of a calcite crystal-based local detector to the discrimination of orbital angular momentum of quantum radiation produced by parametric down conversion. We demonstrate that a discrimination can be obtained exploiting the introduction of a fine and controlled spatial shift between two replicas of the state in the crystals. We believe that this technology could be used for future development of long-distance quantum communication techniques, where information encoding is based on orbital angular momentum.

quant-ph↗

arXiv2023

A monolithic interferometer for high-sensitive strictly-local detection of orbital angular momentum states of light

We propose an innovative monolithic interferometer to distinguish the topological charge of radiation carrying orbital angular momentum. Remarkably, our method requires to access only a small portion of the entire wavefront. The proposed scheme relies on a monolithic birefringent crystal, and as such it is intrinsically stable and does not require any feedback or thermal drift compensation. An experimental setup has been realized to prove the effectiveness of the proposed method down to the photon counting regime.

physics.optics↗

arXiv2022

Low frequency-to-intensity noise conversion in a pulsed laser cavity locking by exploiting Carrier-Envelope Offset manipulation

We report on the dependence of the frequency-to-intensity noise conversion in the locking of an ultrafast laser against a high-finesse optical resonator from the Carrier Envelope Offset (CEO) frequency. By a proper combination of the cavity finesse and laser CEO frequency it is possible to optimize the signal-to-noise ratio of the laser intensity trapped into the optical resonator. The theoretical description of the problem together with the numerical simulations and experimental results are presented with the aim of a strong suppression of the intensity fluctuations of the trapped laser field.

physics.optics↗

arXiv2021

Experimentally determining the incompatibility of two qubit measurements

We describe and realize an experimental procedure for assessing the incompatibility of two qubit measurements. The experiment consists in a state discrimination task where either measurement is used according to some partial intermediate information. The success statistics of the task provides an upper bound for the amount of incompatibility of the two measurements, as it is quantified by means of their incompatibility robustness. For a broad class of unbiased and possibly noisy qubit measurements, one can make this upper bound coincide with the true value of the robustness by suitably tuning the preparation of the experiment. We demonstrate this fact in an optical setup, where the qubit states are encoded into the photons' polarization degrees of freedom, and incompatibility is directly accessed by virtue of a refined control on the amplitude, phase and purity of the final projection stage of the measurements. Our work thus establishes the practical feasibility of a recently proposed method for the detection of quantum incompatibility.

quant-ph↗

arXiv2021

An Enhanced Photonic Quantum Finite Automaton

In a recent paper we have described an optical implementation of a measure-once one-way quantum finite automaton recognizing a well-known family of unary periodic languages, accepting words not in the language with a given error probability. To process input words, the automaton exploits the degree of polarization of single photons and, to reduce the acceptance error probability, a technique of confidence amplification using the photon counts is implemented. In this paper, we show that the performance of this automaton may be further improved by using strategies that suitably consider both the orthogonal output polarizations of the photon. In our analysis, we also take into account how detector dark counts may affect the performance of the automaton.

quant-ph↗

arXiv2021

Novel technique for the active stabilization of the relative phase between seed and pump in an optical parametric oscillator

We design and demonstrate a novel technique for the active stabilization of the relative phase between seed and pump in an optical parametric oscillator (OPO). We show that two error signals for the stabilization of the OPO frequency, based on Pound-Drever-Hall (PDH), and of the seed-pump relative phase can be obtained just from the reflected beam of the OPO cavity, without the necessity of two different modulation and demodulation stages. We also analyze the effect of the pump in the cavity stabilization for different seed-pump relative phase configurations, resulting in an offset in the PDH error signal, which has to be compensated. Finally, an application of our technique in the reliable generation of squeezed coherent states is presented.

quant-ph↗

arXiv2021

Phase noise mitigation by a realistic optical parametric oscillator

We address the exploitation of an optical parametric oscillator (OPO) in the task of mitigating, at least partially, phase noise produced by phase diffusion. In particular, we analyze two scenarios where phase diffusion is typically present. The first one is the measurement of the phase of a noisy optical field, while the second involves a quantum estimation scheme of a phase shift imposed on a noisy probe. In both cases, we prove that an OPO may lead to a partial or full compensation of the noise.

quant-ph↗

arXiv2021

Realization and characterization of a low intensity noise ultrafast Yb-doped fiber amplifier

We report on the design and whole characterization of low-noise and affordable-cost Yb-doped double-clad fiber amplifiers operating at room temperature in the near-infrared spectral region at pulse repetition rate of 160 MHz. Two different experimental configurations are discussed. In the first one, a broadband seed radiation with a transform limited pulse duration of 71 fs, an optical spectrum of 20 nm wide at around 1040 nm, and 20 mW average power is adopted. In the second configuration, the seed radiation is constituted by stretched pulses with a time duration as long as 170 ps, with a 5-nm narrow pulse spectrum centered at 1029 nm and 2 mW average input power. In both cases we obtained transform limited pulse trains with an amplified output power exceeding 2 W. Furthermore, relative intensity noise measurements show that no significant noise degradation occurs during the amplification process.

physics.optics↗

arXiv2021

A new method for spatial mode shifting of a stabilized optical cavity for the generation of dual-color X-rays

We propose an innovative method to shift the transversal position of the focal point of an optical cavity keeping it actively stabilized. Our cavity is a 4 mirrors bow-tie cavity and the spatial shift of the resonant mode is obtained by properly rotating the two curved mirrors by piezo actuators. This method allows us to move the transversal position of the cavity focal point of $135 \mu m$ in a time of $50 ms$, keeping the resonance condition of the cavity by means of the Pound-Drever-Hall technique. We propose to use this technique for the generation of 2-color X-rays via Inverse Compton Scattering (ICS). This technique exploits the large average power stored in the high finesse cavity by shifting the laser beam with respect to the electron beam trajectory, hence controlling the spatial superposition of the electron and photon beams in the interaction region. Arranging two cavities assembled one on top of the other, with different collision angle with the electron beam, allows the generation of X-ray bursts of different energies just by swiftly moving the two cavities, switching the two focal points onto the electron beam trajectory, thus activating in sequence two different ICS spectral lines.

physics.optics↗

arXiv2020

Squeezing as a resource to counteract phase diffusion in optical phase estimation

We address a phase estimation scheme using Gaussian states in the presence of non-Gaussian phase noise. At variance with previous analysis, we analyze situations in which the noise occurs before encoding phase information. In particular, we study how squeezing may be profitably used before or after phase diffusion. Our results show that squeezing the probe after the noise greatly enhances the sensitivity of the estimation scheme, as witnessed by the increase of the quantum Fisher information. We then consider a realistic setup where homodyne detection is employed at the measurement stage, and address its optimality as well as its performance in the two different scenarios.

quant-ph↗

arXiv2020

Experimental realization of local-to-global noise transition in a two-qubit optical simulator

We demonstrate the transition from local to global noise in a two-qubit all-optical quantum simulator subject to classical random fluctuations. Qubits are encoded in the polarization degree of freedom of two entangled photons generated by parametric down-conversion (PDC) while the environment is implemented using their spatial degrees of freedom. The ability to manipulate with high accuracy the number of correlated pixels of a spatial-light-modulator and the spectral PDC width, allows us to control the transition from a scenario where the qubits are embedded in local environments to the situation where they are subject to the same global noise. We witness the transition by monitoring the decoherence of the two-qubit state.

quant-ph↗

arXiv2020

Photonic Realization of a Quantum Finite Automaton

We describe a physical implementation of a quantum finite automaton recognizing a well known family of periodic languages. The realization exploits the polarization degree of freedom of single photons and their manipulation through linear optical elements. We use techniques of confidence amplification to reduce the acceptance error probability of the automaton. It is worth remarking that the quantum finite automaton we physically realize is not only interesting per se, but it turns out to be a crucial building block in many quantum finite automaton design frameworks theoretically settled in the literature.

quant-ph↗