arXiv subjects

Simone Dal Zilio

Publications and source records attributed to Simone Dal Zilio.

8 recordsLinked to original sources

arXiv2026

Cavity-enhanced superconducting response in an underdoped cuprate

Superconductors carry electrical current without resistance when paired electrons condense into a coherent macroscopic quantum state. In underdoped cuprates, evidence suggests that pairing-related correlations and superconducting fluctuations can survive above the temperature at which global coherence is lost, pointing to phase fluctuations as a key limitation on superconductivity in this regime. Motivated by recent demonstrations of cavity-modified collective states in quantum materials, we investigate whether superconducting coherence can be stabilized by engineering the electromagnetic environment of the superconductor. We study an underdoped YBa$_2$Cu$_3$O$_{7-δ}$ thin film in a tunable terahertz cavity formed with a semi-transparent gold mirror. From temperature-dependent terahertz transmission measurements, we find that the cavity enhances the superconducting response below the critical temperature, with an increase of the inferred superfluid weight. The effect becomes more pronounced at smaller cavity lengths and is accompanied by an upward shift of the superconducting onset temperature. Calculations based on a cavity-coupled model for phase-fluctuating superconductors capture these trends and support an interpretation in terms of cavity-enhanced phase stiffness. These results showcase the potential of cavity engineering for designing emergent functionalities in correlated systems.

cond-mat.supr-con↗

arXiv2026

Automated Spin-Assisted Layer-by-Layer Epitaxy Produces Highly Oriented Mixed-Linker MOF Thin Films

Control over crystallographic orientation in metal-organic framework (MOF) thin films is crucial for exploiting their anisotropic properties in sensing, catalysis, and separation. Achieving reproducible, highly oriented films remains challenging, especially for mixed-linker, pillared-layered frameworks. Here we present an automated, spin-assisted layer-by-layer liquid-phase epitaxy (LbL-LPE) strategy that enables rapid, ambient-condition fabrication of highly oriented, mixed-linker MOF thin films, demonstrated for Zn2BDC2DABCO (BDC = terephthalate, DABCO = 1,4-diazabicyclo[2.2.2]octane). Correlative process monitoring by grazing-incidence wide-angle X-ray scattering (GIWAXS), grazing-angle infrared (GI-IR) and UV-Vis spectroscopy, contact-angle measurements, scanning electron microscopy (SEM), and time-of-flight secondary ion mass spectrometry (ToF-SIMS) ensure formation of uniform films with exceptional out-of-plane (001) orientation (degree of orientation >85%, Hermans parameter ~0.95) and excellent reproducibility. This strategy enables highly reproducible, high-throughput fabrication of orientation-controlled MOF thin films, providing a generalizable alternative to conventional LbL approaches. By enabling reproducible and entirely automated fabrication of highly anisotropic architectures, this work establishes a platform for integrating oriented MOFs into next-generation optoelectronic, sensing, and membrane devices where directional transport and ordered pore alignment are essential.

cond-mat.mtrl-sci↗

arXiv2025

Broadband, Flexible, Skin-Compatible Carbon Dots/Graphene Photodetectors for Wearable Applications

The development of wearable photodetectors demands a unique combination of broadband optical sensitivity, mechanical flexibility, and skin-compatibility, with these requirements rarely met simultaneously by existing technologies. Here, we present photodetectors that combine all of these performances. This is achieved by integrating carbon dots, engineered for extended ultraviolet-to-near-infrared absorption, with single-layer graphene transferred onto a plastic substrate. Unlike traditional quantum dot systems, our carbon dots achieve a broad ultraviolet-to-near-infrared response without toxic heavy metals. Graphene provides an efficient channel for charge transport, while a biocompatible chitosan-glycerol electrolyte enables efficient, low-voltage carrier modulation, with peak performance at approximately 0.5 V gate bias. The resulting photodetectors exhibit a broadband photoresponse with responsivities of approximately 0.19 A/W at 406 nm, 0.32 A/W at 642 nm, and 0.18 A/W at 785 nm. They maintain consistent performance at a bending radius of 0.8 cm with negligible degradation after repeated cycles. Furthermore, skin-compatibility assessments using the SkinEthic model confirm the non-toxic nature and suitability of our devices for direct skin contact. The combination of broadband absorption (400-800 nm), flexibility, and skin-compatibility, along with low-voltage operation ($<$ 1.5 V), positions our photodetectors as promising building blocks for next-generation wearable optoelectronics.

cond-mat.other↗

arXiv2024

Multimode vibrational coupling across the insulator-to-metal transition in 1T-TaS$_{2}$ in THz cavities

The use of optical cavities on resonance with material excitations allows controlling light-matter interaction in both the regimes of weak and strong coupling. We study here the multimode vibrational coupling of low energy phonons in the charge-density-wave material 1T-TaS$_{2}$ across its insulator-to-metal phase transition. For this purpose, we embed 1T-TaS$_{2}$ into THz Fabry-Pérot cryogenic cavities tunable in frequency within the spectral range of the vibrational modes of the insulating phase and track the linear response of the coupled phonons across the insulator-to-metal transition. In the low temperature dielectric state, we reveal the signatures of a multimode vibrational strong collective coupling. The observed polariton modes inherit character from all the vibrational resonances as a consequence of the cavity-mediated hybridization. We reveal that the vibrational strong collective coupling is suppressed across the insulator-to-metal transition as a consequence of the phonon-screening induced by the free charges. Our findings emphasize how the response of cavity-coupled vibrations can be modified by the presence of free charges, uncovering a new direction toward the tuning of coherent light-matter interaction in cavity-confined correlated materials.

cond-mat.mtrl-sci↗

arXiv2023

Cavity-mediated thermal control of metal-to-insulator transition in 1T-TaS$_{2}$

Placing quantum materials into optical cavities provides a unique platform for controlling quantum cooperative properties of matter, via both weak and strong light-matter coupling. Here we report the experimental evidence of reversible cavity control of a metal-to-insulator phase transition in a correlated solid-state material. We embed the charge density wave material 1T-TaS$_{2}$ into cryogenic tunable terahertz cavities and show that a switch between conductive and insulating behaviors, associated with a large change in the sample temperature, is obtained by mechanically tuning the distance between the cavity mirrors and their alignment. The large thermal modification observed is indicative of a Purcell-like scenario in which the spectral profile of the cavity modifies the energy exchange between the material and the external electromagnetic field. Our findings provide opportunities for controlling the thermodynamics and macroscopic transport properties of quantum materials by engineering their electromagnetic environment.

cond-mat.mtrl-sci↗

arXiv2023

Implication of the double-gating mode in hybrid photon counting detector for measurements of transient heat conduction in GaAs/AlAs superlattice structures

Understanding and control of thermal transport in solids at nanoscale is crucial to engineer and to enhance properties of a new generation of optoelectronic, thermoelectric, and photonic devices. In this regard, semiconductor superlattice structures provide a unique platform to study phenomena associated with phonon propagations in solids such as heat conduction. Transient X-ray diffraction can directly probe atomic motions and therefore is among the rare techniques sensitive to phonon dynamics in a condensed matter. Here, we study optically induced transient heat conduction in GaAs/AlAs superlattice structures using EIGER2 detector. Benchmark experiments have been performed at the Austrian SAXS beamline at Elettra Sincrotrone Trieste that operated in the hybrid filling mode. We demonstrate that drifts of experimental conditions, such as synchrotron beam fluctuations, become less essential when utilizing EIGER2 double gating mode that results in a faster acquisition of high quality data and facilitates data analysis and data interpretation.

physics.app-ph↗

arXiv2021

Tunable cryogenic THz cavity for strong light-matter coupling in complex materials

We report here the realization and commissioning of an experiment dedicated to the study of the optical properties of light matter hybrids constituted of crystalline samples embedded in an optical cavity. The experimental assembly developed offers the unique opportunity to study the weak and strong coupling regime between a tunable optical cavity in cryogenic environment and low energy degrees of freedom such as phonons, magnons or charge fluctuations. We describe here the setup developed which allows the positioning of crystalline samples in an optical cavity of different quality factor, the tuning of the cavity length at cryogenic temperatures and its optical characterization with a broadband time domain THz spectrometer (0.2-6 THz). We demonstrate the versatility of the setup by studying the vibrational strong coupling in CuGeO3 single crystal at cryogenic temperatures.

physics.ins-det↗

arXiv2020

Soft X-ray spectroscopies in liquids and at solid-liquid interface at BACH beamline at Elettra

The Beamline for Advanced diCHroism (BACH) of the Istituto Officina dei Materiali-Consiglio Nazionale delle Ricerche (IOM-CNR), operating at Elettra synchrotron in Trieste (Italy), works in the extreme ultra violet (EUV)-soft X-ray photon energy range with selectable light polarization, high energy resolution, brilliance and time resolution. The beamline offers a multi-technique approach for the investigation of the electronic, chemical, structural, magnetic, and dynamical properties of materials. Recently one of the three end-stations has been dedicated to experiments based on electron transfer processes at the solid/liquid interfaces and during photocatalytic or electrochemical reactions. Suitable cells to perform soft X-ray spectroscopy in the presence of liquids and reagent gases at ambient pressure were developed. Here we present two types of static cells working in transmission or in fluorescence yield, and an electrochemical flow cell which allows to carry out cyclic voltammetry in situ, electrodeposition on a working electrode (WE) and to study chemical reactions in-operando conditions. Examples of X-ray absorption spectroscopy (XAS) measurements performed in ambient conditions and during electrochemical experiments in liquid are presented.

physics.ins-det↗