arXiv subjects

Simone Di Filippo

Publications and source records attributed to Simone Di Filippo.

32 records · Page 2Linked to original sources

arXiv2024

What is your favorite transient event? SOXS is almost ready to observe!

The Son Of X-Shooter (SOXS) will be the specialized facility to observe any transient event with a flexible scheduler at the ESO New Technology Telescope (NTT) at La Silla, Chile. SOXS is a single object spectrograph offering simultaneous spectral coverage in UV-VIS (350-850 nm) and NIR (800-2000 nm) wavelength regimes with an average of R~4500 for a 1arcsec slit. SOXS also has imaging capabilities in the visible wavelength regime. Currently, SOXS is being integrated at the INAF-Astronomical Observatory of Padova. Subsystem- and system-level tests and verification are ongoing to ensure and confirm that every requirement and performance are met. In this paper, we report on the integration and verification of SOXS as the team and the instrument prepare for the Preliminary Acceptance Europe (PAE).

astro-ph.IM↗

arXiv2024

The integration of the SOXS control electronics towards the PAE

SOXS (Son Of X-Shooter) is the new single object spectrograph for the ESO New Technology Telescope (NTT) at the La Silla Observatory, able to cover simultaneously both the UV-VIS and NIR bands (350-2000 nm). The instrument is currently in the integration and test phase, approaching the Preliminary Acceptance in Europe (PAE) before shipment to Chile for commissioning. After the assembly and preliminary test of the control electronics at INAF - Astronomical Observatory of Capodimonte (Napoli), the two main control cabinets of SOXS are now hosted in Padova, connected to the real hardware. This contribution describes the final electronic cabinets layout, the control strategy and the different integration phases, waiting for the Preliminary Acceptance in Europe and the installation of the instrument in Chile.

astro-ph.IM↗

arXiv2024

The evaluation of the CUSP scientific performance by a GEANT4 Monte Carlo simulation

The CUbesat Solar Polarimeter (CUSP) project is a CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. CUSP is a project in the framework of the Alcor Program of the Italian Space Agency aimed to develop new CubeSat missions. It is approved for a Phase B study. In this work, we report on the accurate simulation of the detector's response to evaluate the scientific performance. A GEANT4 Monte Carlo simulation is used to assess the physical interactions of the source photons with the detector and the passive materials. Using this approach, we implemented a detailed CUSP Mass Model. In this work, we report on the evaluation of the detector's effective area as a function of the beam energy.

astro-ph.IM↗

arXiv2024

The multi$-$physics analysis and design of CUSP, a two CubeSat constellation for Space Weather and Solar flares X-ray polarimetry

The CUbesat Solar Polarimeter (CUSP) project aims to develop a constellation of two CubeSats orbiting the Earth to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter on board of each satellite. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures. CUSP is a project approved for a Phase B study by the Italian Space Agency in the framework of the Alcor program aimed to develop CubeSat technologies and missions. In this paper we describe the a method for a multi-physical simulation analysis while analyzing some possible design optimization of the payload design solutions adopted. In particular, we report the mechanical design for each structural component, the results of static and dynamic finite element analysis, the preliminary thermo-mechanical analysis for two specific thermal cases (hot and cold orbit) and a topological optimization of the interface between the platform and the payload.

astro-ph.IM↗

arXiv2024

The CUbesat Solar Polarimeter (CUSP) mission overview

The CUbesat Solar Polarimeter (CUSP) project is a future CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band, by means of a Compton scattering polarimeter. CUSP will allow us to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. The project is in the framework of the Italian Space Agency Alcor Program, which aims to develop new CubeSat missions. CUSP is approved for a Phase B study that will last for 12 months, starting in mid-2024. We report on the current status of the CUSP mission project as the outcome of the Phase A.

astro-ph.IM↗

arXiv2024

An Ingot-like class of WaveFront Sensors for Laser Guide Stars

Full sky coverage Adaptive Optics on Extremely Large Telescopes requires the adoption of several Laser Guide Stars as references.With such large apertures, the apparent elongation of the beacons is absolutely significant.With few exceptions,WaveFront Sensors designed for Natural Guide Stars are adapted and used in suboptimal mode in this context. We analyse and describe the geometrical properties of a class of WaveFront Sensors that are specifically designed to deal with Laser Guide Stars propagated from a location in the immediate vicinity of the telescope aperture. We describe in three dimensions the loci where the light of the Laser Guide Stars would focus in the focal volume located behind the focal plane (where astronomical objects are reimaged). We also describe the properties of several types of optomechanical devices that, through refraction and reflections, act as perturbers for this new class of pupil plane sensors, which we call ingot WaveFront Sensor. We give the recipes both for the most reasonable complex version of these WaveFront Sensors, with 6 pupils, and for the simplest one, with only 3 pupils. Both of them are referred to the ELT case. Elements to have a qualitative idea of how the sensitivity of such a new class of sensors compared to conventional ones are outlined. We present a new class of WaveFront Sensors, by carrying out the extension to the case of elongated sources at finite distance of the pyramid WaveFront Sensor and pointing out which advantages of the pyramid are retained and how it can be adopted to optimize the sensing.

astro-ph.IM↗

arXiv2023

MORFEO enters final design phase

MORFEO (Multi-conjugate adaptive Optics Relay For ELT Observations, formerly MAORY), the MCAO system for the ELT, will provide diffraction-limited optical quality to the large field camera MICADO. MORFEO has officially passed the Preliminary Design Review and it is entering the final design phase. We present the current status of the project, with a focus on the adaptive optics system aspects and expected milestones during the next project phase.

astro-ph.IM↗

arXiv2022

Laboratory testing of the Ingot WFS

The ingot WFS is a new kind of wavefront sensor specifically designed to deal with the elongation of LGS reference sources on ELT-class telescopes. Like the pyramid, it belongs to the family of pupil plane wavefront sensors and can be considered as a generalization of the pyramid WFS for extended, three-dimensional elongated sources. The current design uses a simple, reflective roof-shaped prism to split the light into three pupils that are used to retrieve the wavefront shape. A test-bench has been realized at the INAF-Padova laboratories to test the alignment and functioning of the ingot. The bench is equipped with a deformable lens, conjugated to the pupil plane, able to apply low-order aberrations and with a hexapod for the precise alignment of the ingot prism. In this work we present a robust and fully automated Python-code alignment procedure, which is able, by using the optical feedback from the I-WFS, to adjust its 6-degrees of freedom. Moreover, we report on the tests conducted with the deformable lens to characterize the ingot WFS response to low-order aberrations in terms of sensitivity and linearity. The results are used as a comparison for simulations to validate the ray-tracing modeling approach with the future goal of optimizing the procedure adopted for signal calculation and phase retrieval.

astro-ph.IM↗

arXiv2022

The Ingot WFS ON an ELT-like telescope: the project and simulations

The Ingot WFS represents an innovative and indispensable class of sensors conceived to overcome some limitations due to the LGSs geometry, which is significantly different from the point-object originated by a NGS. Here we overview the project, aiming at investigating the performance of an ELT-like telescope equipped with the Ingot WFS, facing different aspects of the program: the needs for numerical simulations and laboratory experiments, the prototype and, finally the future plan for the verification on sky.

astro-ph.IM↗

arXiv2022

CUSP: a two cubesats constellation for Space Weather and solar flares X-ray polarimetry

The CUbesat Solar Polarimeter (CUSP) project aims to develop a constellation of two CubeSats orbiting the Earth to measure the linear polarisation of solar flares in the hard X-ray band by means of a Compton scattering polarimeter on board of each satellite. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures. CUSP is a project approved for a Phase A study by the Italian Space Agency in the framework of the Alcor program aimed to develop CubeSat technologies and missions.

astro-ph.SR↗

arXiv2021

Optical design trade-off study for the AO module of MAVIS

MAVIS (MCAO-Assisted Visible Imager and Spectrograph) is an instrument proposed for the VLT Adaptive Optics Facility (AOF), which is currently in the phase-A conceptual design study. It will be the first instrument performing Multi-conjugate adaptive optics at visible wavelengths, enabling a new set of science observations. MAVIS will be installed at the Nasmyth platform of VLT UT-4 taking advantage of the already operational Adaptive Optics Facility that consists of 4 LGS and an adaptive secondary mirror with 1170 actuators. In addition, two post-focal deformable mirrors and 3 Natural Guide Stars (NGS) are foreseen for the tomographic reconstruction and correction of atmospheric turbulence. The MAVIS AO module is intended to feed both an imager and a spectrograph that will take advantage of the increased resolution and depth with respect to current instrumentation. In this paper we present the trade-off study for the optical design of the MAVIS AO module, highlighting the peculiarities of the system and the requirements imposed by AO. We propose a set of possible optical solutions able to provide a compact and efficient implementation of the different subsystems and we compare them in terms of delivered optical quality, overall throughput, encumbrance, ease of alignment and residual distortion.

astro-ph.IM↗

arXiv2021

INGOT Wavefront Sensor: from the optical design to a preliminary laboratory test

The Ingot wavefront sensor is a novel pupil-plane wavefront sensor, specifically designed to cope with the elongation typical of the extended nature of the Laser Guide Star (LGS). In the framework of the ELT, we propose an optical solution suitable for a Laser launch telescope, located outside the telescope pupil. In this paper, we present the current optical design, based on a reflective roof-shaped prism, which, at the level of the focal plane, splits the light from an LGS producing three beams. The three images of the telescope pupils can be then used for the retrieval of the first derivative of the wavefront. The 3D nature of such a device requires new alignment techniques to be determined theoretically and verified in the real world. A possible fully automated procedure, relying solely on the illumination observed at the three pupils, to align the prism to the image of the LGS is discussed. Careful attention needs to be put both on the telecentricity of the system and on the reference systems of the Ingot adjustments in the 3D space. This is crucial in order to disentangle all the possible misalignment effects. In this context, we devised a test-bench able to reproduce, in a scaled manner, the 3D illumination that the Ingot will face at the ELT, in order to validate the design and to perform preliminary tests of phase retrieval.

astro-ph.IM↗

arXiv2020

Pupil plane wavefront sensing for extended and 3D sources

The basic outline of a pupil plane WaveFront Sensor is reviewed taking into account that the source to be sensed could be different from an unresolved source, i.e. it is extended, and that it could deploy also in a 3D fashion, enough to exceed the field's depth of the observing telescope. Under these conditions it is pointed out that the features of the reference are not invariant for different position on the pupil and it is shown that the INGOT WFS is the equivalent of the Pyramid for a Laser Guide Star. Under these conditions one can imagine to use a Dark WFS approach to improve the SNR of such a WFS, or to use a corrected upward beam in order to achieve a better use of the LGS photons with respect to an ideal Shack-Hartmann WFS.

astro-ph.IM↗

arXiv2020

INGOT Wavefront Sensor: Simulation of Pupil Images

The ingot wavefront sensor (I-WFS) has been proposed, for ELT-like apertures, as a possible pupil plane WFS, to cope with the geometrical characteristics of a laser guide star (LGS). Within the study and development of such a WFS, on-going in the framework of the MAORY project, the final purpose of the I-WFS simulation is to estimate its performance in terms of wavefront aberration measurement capability. The first step of this analysis is to translate incoming wavefronts into the three pupil images, produced by the optical system. The intrinsic geometrical characteristics of the ingot optical element, designed to be coupled with the LGS elongated image, make the system conceptually different with respect to other pupil WFSs (like the Pyramid WFS, P-WFS) also in terms of the simulation technique to be selected, within the ones which can be found in literature. In this paper, we aim to report the considerations and derivations which led to the selection of a ray-tracing method for ingot pupil images simulation, and the geometrical assumptions and approach made to optimize the computing time.

astro-ph.IM↗