arXiv subjects

Simone Lisi

Publications and source records attributed to Simone Lisi.

10 recordsLinked to original sources

arXiv2026

Electronic structure of Graphene/Co interfaces

Photoemission, from core levels and valence band, and low-energy electron diffraction (LEED) have been employed to investigate the electronic and structural properties of novel graphene-ferromagnetic (G-FM) systems,obtained by intercalation of one mono-layer (1ML) and several layers (4ML) of Co on G grown on Ir(111). Upon intercalation of 1ML of Co, the Co lattice is resized to match the Ir-Ir lattice parameter, resulting in a mismatched G/Co/Ir(111) system. The intercalation of further Co layers leads to a relaxation of the Co lattice and a progressive formation of a commensurate G layer lying on top. We show the C 1s line shape and the band structure of G in the two artificial phases, mismatched and commensurate G/Co, through a comparison with the electronic structure of G grown directly on a Co thick film. Our results show that while the G valence band mainly reflects the hybridization with the d states of Co, regardless of the structural phase, the C 1s line shape is very sensitive to the rumpling of the G layer and the coordination of carbon atoms with the underlying Co. Even in the commensurate (1x1) G/Co phase, where graphene is in register with the Co film, from the angular dependence of the C 1s core level we infer the presence of a double component, due to in-equivalent adsorption sites of carbon sub-lattices.

cond-mat.mtrl-sci↗

arXiv2023

Electronic structure of few-layer black phosphorus from $\mu$-ARPES

Black phosphorus (BP) stands out among two-dimensional (2D) semiconductors because of its high mobility and thickness dependent direct band gap. However, the quasiparticle band structure of ultrathin BP has remained inaccessible to experiment thus far. Here we use a recently developed laser-based micro-focus angle resolved photoemission ($\mu$-ARPES) system to establish the electronic structure of 2-9 layer BP from experiment. Our measurements unveil ladders of anisotropic, quantized subbands at energies that deviate from the scaling observed in conventional semiconductor quantum wells. We quantify the anisotropy of the effective masses and determine universal tight-binding parameters which provide an accurate description of the electronic structure for all thicknesses.

cond-mat.mes-hall↗

arXiv2022

Two-way twisting of a confined monolayer: orientational ordering within the van der Waals gap between graphene and its crystalline substrate

Two-dimensional confinement of lattices produces a variety of order and disorder phenomena. When the confining walls have atomic granularity, unique structural phases are expected, of relevance in nanotribology, porous materials or intercalation compounds where \textit{e.g.} electronic states can emerge accordingly. The interlayer's own order is frustrated by the competing interactions exerted by the two confining surfaces. We revisit the concept of orientational ordering, introduced by Novaco and McTague to describe the twist of incommensurate monolayers on crystalline surfaces. We predict a two-way twist of the monolayer as its density increases. We discover such a behavior in alkali atom monolayers (sodium, cesium) confined between graphene and an iridium surface, using scanning tunneling microscopy and electron diffraction.

cond-mat.mes-hall↗

arXiv2022

Electronic structure of 2D van der Waals crystals and heterostructures investigated by spatially- and angle-resolved photoemission

Angle-resolved photoemission is a direct probe of the momentum-resolved electronic structure and proved influential in the study of bulk crystals with novel electronic properties. Thanks to recent technical advances, this technique can now be applied for the first time for the study of van der Waals heterostructures built by stacking two-dimensional crystals. In this article we will present the current state of the art in angle-resolved photoemission measurements on two-dimensional materials and review this still young field. We will focus in particular on devices similar to those used in transport and optics experiments, including the latest developments on magic-angle twisted bilayer graphene and on the in-operando characterization of gate tunable devices.

cond-mat.mtrl-sci↗

arXiv2020

Structure of graphene and a surface carbide grown on the (0001) surface of rhenium

Transition metal surfaces catalyse a broad range of thermally-activated reactions involving carbon-containing-species -- from atomic carbon to small hydrocarbons or organic molecules, and polymers. These reactions yield well-separated phases, for instance graphene and the metal surface, or, on the contrary, alloyed phases, such as metal carbides. Here, we investigate carbon phases on a rhenium (0001) surface, where the former kind of phase can transform into the latter. We find that this transformation occurs with increasing annealing time, which is hence not suitable to increase the quality of graphene. Our scanning tunneling spectroscopy and reflection high-energy electron diffraction analysis reveal that repeated short annealing cycles are best suited to increase the lateral extension of the structurally coherent graphene domains. Using the same techniques and with the support of density functional theory calculations, we next unveil, in real space, the symmetry of the many variants (two six-fold families) of a rhenium surface carbide observed with diffraction since the 1970s, and finally propose models of the atomic details. One of these models, which nicely matches the microscopy observations, consists of parallel rows of eight aligned carbon trimers with a so-called $(7\times\sqrt{\mathrm{19}})$ unit cell with respect to Re(0001).

cond-mat.mtrl-sci↗

arXiv2020

How to induce superconductivity in epitaxial graphene $via$ remote proximity effect through an intercalated gold layer

Graphene holds promises for exploring exotic superconductivity with Dirac-like fermions. Making graphene a superconductor at large scales is however a long-lasting challenge. A possible solution relies on epitaxially-grown graphene, using a superconducting substrate. Such substrates are scarce, and usually destroy the Dirac character of the electronic band structure. Using electron diffraction (reflection high-energy, and low-energy), scanning tunneling microscopy and spectroscopy, atomic force microscopy, angle-resolved photoemission spectroscopy, Raman spectroscopy, and density functional theory calculations, we introduce a strategy to induce superconductivity in epitaxial graphene $via$ a remote proximity effect, from the rhenium substrate through an intercalated gold layer. Weak graphene-Au interaction, contrasting with the strong undesired graphene-Re interaction, is demonstrated by a reduced graphene corrugation, an increased distance between graphene and the underlying metal, a linear electronic dispersion and a characteristic vibrational signature, both latter features revealing also a slight $p$ doping of graphene. We also reveal that the main shortcoming of the intercalation approach to proximity superconductivity is the creation of a high density of point defects in graphene (10$^{14}$~cm$^{-2}$). Finally, we demonstrate remote proximity superconductivity in graphene/Au/Re(0001), at low temperature.

cond-mat.supr-con↗

arXiv2020

Decoupling Molybdenum Disulfide from its Substrate by Cesium Intercalation

Intercalation of alkali atoms within the lamellar transition metal dichalcogenides is a possible route toward a new generation of batteries. It is also a way to induce structural phase transitions authorizing the realization of optical and electrical switches in this class of materials. The process of intercalation has been mostly studied in three-dimensional dichalcogenide films. Here, we address the case of a single-layer of molybdenum disulfide (MoS$_2$), deposited on a gold substrate, and intercalated with cesium (Cs) in ultra-clean conditions (ultrahigh vacuum). We show that intercalation decouples MoS$_2$ from its substrate. We reveal electron transfer from Cs to MoS$_2$, relative changes in the energy of the valence band maxima, and electronic disorder induced by structural disorder in the intercalated Cs layer. Besides, we find an abnormal lattice expansion of MoS$_2$, which we relate to immediate vicinity of Cs. Intercalation is thermally activated, and so is the reverse process of de-intercalation. Our work opens the route to a microscopic understanding of a process of relevance in several possible future technologies, and shows a way to manipulate the properties of two-dimensional dichalcogenides by "under-cover" functionalization.

cond-mat.mtrl-sci↗

arXiv2020

Direct evidence for flat bands in twisted bilayer graphene from nano-ARPES

Transport experiments in twisted bilayer graphene revealed multiple superconducting domes separated by correlated insulating states. These properties are generally associated with strongly correlated states in a flat mini-band of the hexagonal moir\'e superlattice as it was predicted by band structure calculations. Evidence for such a flat band comes from local tunneling spectroscopy and electronic compressibility measurements, reporting two or more sharp peaks in the density of states that may be associated with closely spaced van Hove singularities. Direct momentum resolved measurements proved difficult though. Here, we combine different imaging techniques and angle resolved photoemission with simultaneous real and momentum space resolution (nano-ARPES) to directly map the band dispersion in twisted bilayer graphene devices near charge neutrality. Our experiments reveal large areas with homogeneous twist angle that support a flat band with spectral weight that is highly localized in momentum space. The flat band is separated from the dispersive Dirac bands which show multiple moir\'e hybridization gaps. These data establish the salient features of the twisted bilayer graphene band structure.

cond-mat.str-el↗

arXiv2018

FePc Adsorption on the Moir\'e Superstructure of Graphene Intercalated with a Co Layer

The moir\'e superstructure of graphene grown on metals can drive the assembly of molecular architectures, as iron-phthalocyanine (FePc) molecules, allowing for the production of artificial molecular configurations. A detailed analysis of the Gr/Co interaction upon intercalation (including a modelling of the resulting moir\'e pattern) is performed here by density functional theory, which provides an accurate description of the template as a function of the corrugation parameters. The theoretical results are a preliminary step to describe the interaction process of the FePc molecules adsorption on the Gr/Co system. Core level photoemission and absorption spectroscopies have been employed to control the preferential adsorption regions of the FePc on the graphene moir\'e superstructure and the interaction of the central Fe ion with the underlying Co. Our results show that upon molecular adsorption the distance of C atoms from the Co template mainly drives the strength of the molecules-substrate interaction, thereby allowing for locally different electronic properties within the corrugated interface.

cond-mat.mtrl-sci↗

arXiv2018

Weakly Trapped, Charged, and Free Excitons in Single-Layer MoS2 in the Presence of Defects, Strain, and Charged Impurities

Few- and single-layer MoS2 host substantial densities of defects. They are thought to influence the doping level, the crystal structure, and the binding of electron-hole pairs. We disentangle the concomitant spectroscopic expression of all three effects and identify to what extent they are intrinsic to the material or extrinsic to it, i.e., related to its local environment. We do so by using different sources of MoS2 -- a natural one and one prepared at high pressure and high temperature -- and different substrates bringing varying amounts of charged impurities and by separating the contributions of internal strain and doping in Raman spectra. Photoluminescence unveils various optically active excitonic complexes. We discover a defect-bound state having a low binding energy of 20 meV that does not appear sensitive to strain and doping, unlike charged excitons. Conversely, the defect does not significantly dope or strain MoS2. Scanning tunneling microscopy and density functional theory simulations point to substitutional atoms, presumably individual nitrogen atoms at the sulfur site. Our work shows the way to a systematic understanding of the effect of external and internal fields on the optical properties of two-dimensional materials.

cond-mat.mtrl-sci↗