arXiv subjects

Siyuan Dong

Publications and source records attributed to Siyuan Dong.

31 records · Page 2Linked to original sources

arXiv2021

Extrinsic Contact Sensing with Relative-Motion Tracking from Distributed Tactile Measurements

This paper addresses the localization of contacts of an unknown grasped rigid object with its environment, i.e., extrinsic to the robot. We explore the key role that distributed tactile sensing plays in localizing contacts external to the robot, in contrast to the role that aggregated force/torque measurements play in localizing contacts on the robot. When in contact with the environment, an object will move in accordance with the kinematic and possibly frictional constraints imposed by that contact. Small motions of the object, which are observable with tactile sensors, indirectly encode those constraints and the geometry that defines them. We formulate the extrinsic contact sensing problem as a constraint-based estimation. The estimation is subject to the kinematic constraints imposed by the tactile measurements of object motion, as well as the kinematic (e.g., non-penetration) and possibly frictional (e.g., sticking) constraints imposed by rigid-body mechanics. We validate the approach in simulation and with real experiments on the case studies of fixed point and line contacts. This paper discusses the theoretical basis for the value of distributed tactile sensing in contrast to aggregated force/torque measurements. It also provides an estimation framework for localizing environmental contacts with potential impact in contact-rich manipulation scenarios such as assembling or packing.

cs.RO↗

arXiv2021

GelSlim3.0: High-Resolution Measurement of Shape, Force and Slip in a Compact Tactile-Sensing Finger

This work presents a new version of the tactile-sensing finger GelSlim 3.0, which integrates the ability to sense high-resolution shape, force, and slip in a compact form factor for use with small parallel jaw grippers in cluttered bin-picking scenarios. The novel design incorporates the capability to use real-time analytic methods to measure shape, estimate the contact 3D force distribution, and detect incipient slip. To achieve a compact integration, we optimize the optical path from illumination source to camera and other geometric variables in a optical simulation environment. In particular, we optimize the illumination sources and a light shaping lens around the constraints imposed by the photometric stereo algorithm used for depth reconstruction. The optimized optical configuration is integrated into a finger design composed of robust and easily replaceable snap-to-fit fingetip module that allow for ease of manufacture, assembly, use, and repair. To stimulate future research in tactile-sensing and provide the robotics community access to reliable and easily-reproducible tactile finger with a diversity of sensing modalities, we open-source the design and software at https://github.com/mcubelab/gelslim.

cs.RO↗

arXiv2020

Cable Manipulation with a Tactile-Reactive Gripper

Cables are complex, high dimensional, and dynamic objects. Standard approaches to manipulate them often rely on conservative strategies that involve long series of very slow and incremental deformations, or various mechanical fixtures such as clamps, pins or rings. We are interested in manipulating freely moving cables, in real time, with a pair of robotic grippers, and with no added mechanical constraints. The main contribution of this paper is a perception and control framework that moves in that direction, and uses real-time tactile feedback to accomplish the task of following a dangling cable. The approach relies on a vision-based tactile sensor, GelSight, that estimates the pose of the cable in the grip, and the friction forces during cable sliding. We achieve the behavior by combining two tactile-based controllers: 1) Cable grip controller, where a PD controller combined with a leaky integrator regulates the gripping force to maintain the frictional sliding forces close to a suitable value; and 2) Cable pose controller, where an LQR controller based on a learned linear model of the cable sliding dynamics keeps the cable centered and aligned on the fingertips to prevent the cable from falling from the grip. This behavior is possible by a reactive gripper fitted with GelSight-based high-resolution tactile sensors. The robot can follow one meter of cable in random configurations within 2-3 hand regrasps, adapting to cables of different materials and thicknesses. We demonstrate a robot grasping a headphone cable, sliding the fingers to the jack connector, and inserting it. To the best of our knowledge, this is the first implementation of real-time cable following without the aid of mechanical fixtures.

cs.RO↗

arXiv2020

Tactile Dexterity: Manipulation Primitives with Tactile Feedback

This paper develops closed-loop tactile controllers for dexterous robotic manipulation with a dual-palm robotic system. Tactile dexterity is an approach to dexterous manipulation that plans for robot/object interactions that render interpretable tactile information for control. We divide the role of tactile control into two goals: 1) control the contact state between the end-effector and the object (contact/no-contact, stick/slip) by regulating the stability of planned contact configurations and monitoring undesired slip events; and 2) control the object state by tactile-based tracking and iterative replanning of the object and robot trajectories. Key to this formulation is the decomposition of manipulation plans into sequences of manipulation primitives with simple mechanics and efficient planners. We consider the scenario of manipulating an object from an initial pose to a target pose on a flat surface while correcting for external perturbations and uncertainty in the initial pose of the object. We experimentally validate the approach with an ABB YuMi dual-arm robot and demonstrate the ability of the tactile controller to react to external perturbations.

cs.RO↗

arXiv2019

Tactile-Based Insertion for Dense Box-Packing

We study the problem of using high-resolution tactile sensors to control the insertion of objects in a box-packing scenario. We propose a new system based on a tactile sensor GelSlim for the dense packing task. In this paper, we propose an insertion strategy that leverages tactile sensing to: 1) safely probe the box with the grasped object while monitoring incipient slip to maintain a stable grasp on the object. 2) estimate and correct for residual position uncertainties to insert the object into a designated gap without disturbing the environment. Our proposed methodology is based on two neural networks that estimate the error direction and error magnitude, from a stream of tactile imprints, acquired by two GelSlim fingers, during the insertion process. The system is trained on four objects with basic geometric shapes, which we show generalizes to four other common objects. Based on the estimated positional errors, a heuristic controller iteratively adjusts the position of the object and eventually inserts it successfully without requiring prior knowledge of the geometry of the object. The key insight is that dense tactile feedback contains useful information with respect to the contact interaction between the grasped object and its environment. We achieve high success rate and show that unknown objects can be inserted with an average of 6 attempts of the probe-correct loop. The method's ability to generalize to novel objects makes it a good fit for box packing in warehouse automation.

cs.RO↗

arXiv2019

Dense Tactile Force Distribution Estimation using GelSlim and inverse FEM

In this paper, we present a new version of tactile sensor GelSlim 2.0 with the capability to estimate the contact force distribution in real time. The sensor is vision-based and uses an array of markers to track deformations on a gel pad due to contact. A new hardware design makes the sensor more rugged, parametrically adjustable and improves illumination. Leveraging the sensor's increased functionality, we propose to use inverse Finite Element Method (iFEM), a numerical method to reconstruct the contact force distribution based on marker displacements. The sensor is able to provide force distribution of contact with high spatial density. Experiments and comparison with ground truth show that the reconstructed force distribution is physically reasonable with good accuracy.

cs.RO↗

arXiv2018

Maintaining Grasps within Slipping Bound by Monitoring Incipient Slip

In this paper, we propose an approach to detect incipient slip, i.e. predict slip, by using a high-resolution vision-based tactile sensor, GelSlim. The sensor dynamically captures the tactile imprints of the contact object and their changes with a soft gel pad. The method assumes the object is mostly rigid and treats the motion of object's imprint on sensor surface as a 2D rigid-body motion. We use the deviation of the true motion field from that of a 2D planar rigid transformation as a measure of slip. The output is a dense slip field which we use to detect when small areas of the contact patch start to slip (incipient slip). The method can detect both translational and rotational incipient slip without any prior knowledge of the object at 24 Hz. We test the method on 10 objects 240 times and achieve 86.25% detection accuracy. We further show how the slip feedback can be used to monitor the gripping force to avoid slip with a closed-loop bottle-cap screwing and unscrewing experiment with incipient slip detection feedback. The method was demonstrated to be useful for the robot to apply proper gripping force and stop screwing at the right point before breaking objects. The method can be applied to many manipulation tasks in both structured and unstructured environments.

cs.RO↗

arXiv2018

GelSlim: A High-Resolution, Compact, Robust, and Calibrated Tactile-sensing Finger

This work describes the development of a high-resolution tactile-sensing finger for robot grasping. This finger, inspired by previous GelSight sensing techniques, features an integration that is slimmer, more robust, and with more homogeneous output than previous vision-based tactile sensors. To achieve a compact integration, we redesign the optical path from illumination source to camera by combining light guides and an arrangement of mirror reflections. We parameterize the optical path with geometric design variables and describe the tradeoffs between the finger thickness, the depth of field of the camera, and the size of the tactile sensing area. The sensor sustains the wear from continuous use -- and abuse -- in grasping tasks by combining tougher materials for the compliant soft gel, a textured fabric skin, a structurally rigid body, and a calibration process that maintains homogeneous illumination and contrast of the tactile images during use. Finally, we evaluate the sensor's durability along four metrics that track the signal quality during more than 3000 grasping experiments.

cs.RO↗

arXiv2018

Slip Detection with Combined Tactile and Visual Information

Slip detection plays a vital role in robotic manipulation and it has long been a challenging problem in the robotic community. In this paper, we propose a new method based on deep neural network (DNN) to detect slip. The training data is acquired by a GelSight tactile sensor and a camera mounted on a gripper when we use a robot arm to grasp and lift 94 daily objects with different grasping forces and grasping positions. The DNN is trained to classify whether a slip occurred or not. To evaluate the performance of the DNN, we test 10 unseen objects in 152 grasps. A detection accuracy as high as 88.03% is achieved. It is anticipated that the accuracy can be further improved with a larger dataset. This method is beneficial for robots to make stable grasps, which can be widely applied to automatic force control, grasping strategy selection and fine manipulation.

cs.RO↗

arXiv2017

Improved GelSight Tactile Sensor for Measuring Geometry and Slip

A GelSight sensor uses an elastomeric slab covered with a reflective membrane to measure tactile signals. It measures the 3D geometry and contact force information with high spacial resolution, and successfully helped many challenging robot tasks. A previous sensor, based on a semi-specular membrane, produces high resolution but with limited geometry accuracy. In this paper, we describe a new design of GelSight for robot gripper, using a Lambertian membrane and new illumination system, which gives greatly improved geometric accuracy while retaining the compact size. We demonstrate its use in measuring surface normals and reconstructing height maps using photometric stereo. We also use it for the task of slip detection, using a combination of information about relative motions on the membrane surface and the shear distortions. Using a robotic arm and a set of 37 everyday objects with varied properties, we find that the sensor can detect translational and rotational slip in general cases, and can be used to improve the stability of the grasp.

cs.RO↗

arXiv2017

Connecting Look and Feel: Associating the visual and tactile properties of physical materials

For machines to interact with the physical world, they must understand the physical properties of objects and materials they encounter. We use fabrics as an example of a deformable material with a rich set of mechanical properties. A thin flexible fabric, when draped, tends to look different from a heavy stiff fabric. It also feels different when touched. Using a collection of 118 fabric sample, we captured color and depth images of draped fabrics along with tactile data from a high resolution touch sensor. We then sought to associate the information from vision and touch by jointly training CNNs across the three modalities. Through the CNN, each input, regardless of the modality, generates an embedding vector that records the fabric's physical property. By comparing the embeddings, our system is able to look at a fabric image and predict how it will feel, and vice versa. We also show that a system jointly trained on vision and touch data can outperform a similar system trained only on visual data when tested purely with visual inputs.

cs.CV↗

arXiv2014

SEK: Sparsity exploiting $k$-mer-based estimation of bacterial community composition

Motivation: Estimation of bacterial community composition from a high-throughput sequenced sample is an important task in metagenomics applications. Since the sample sequence data typically harbors reads of variable lengths and different levels of biological and technical noise, accurate statistical analysis of such data is challenging. Currently popular estimation methods are typically very time consuming in a desktop computing environment. Results: Using sparsity enforcing methods from the general sparse signal processing field (such as compressed sensing), we derive a solution to the community composition estimation problem by a simultaneous assignment of all sample reads to a pre-processed reference database. A general statistical model based on kernel density estimation techniques is introduced for the assignment task and the model solution is obtained using convex optimization tools. Further, we design a greedy algorithm solution for a fast solution. Our approach offers a reasonably fast community composition estimation method which is shown to be more robust to input data variation than a recently introduced related method. Availability: A platform-independent Matlab implementation of the method is freely available at http://www.ee.kth.se/ctsoftware; source code that does not require access to Matlab is currently being tested and will be made available later through the above website.

q-bio.GN↗

arXiv2014

Spectrum multiplexing and coherent-state decomposition in Fourier ptychographic imaging

Information multiplexing is important for biomedical imaging and chemical sensing. In this paper, we report a microscopy imaging technique, termed state-multiplexed Fourier ptychography (FP), for information multiplexing and coherent-state decomposition. Similar to a typical Fourier ptychographic setting, we use an array of light sources to illuminate the sample from different incident angles and acquire corresponding low-resolution images using a monochromatic camera. In the reported technique, however, multiple light sources are lit up simultaneously for information multiplexing, and the acquired images thus represent incoherent summations of the sample transmission profiles corresponding to different coherent states. We show that, by using the state-multiplexed FP recovery routine, we can decompose the incoherent mixture of the FP acquisitions to recover a high-resolution sample image. We also show that, color-multiplexed imaging can be performed by simultaneously turning on R/G/B LEDs for data acquisition. The reported technique may provide a solution for handling the partially coherent effect of light sources used in Fourier ptychographic imaging platforms. It can also be used to replace spectral filter, gratings or other optical components for spectral multiplexing and demultiplexing. With the availability of cost-effective broadband LEDs, the reported technique may open up exciting opportunities for computational multispectral imaging.

physics.optics↗