arXiv subjects

Slava Maslennikov

Publications and source records attributed to Slava Maslennikov.

6 recordsLinked to original sources

arXiv2026

Quantifying and Improving the Accuracy of Electromagnetic Transient-Transient Stability Hybrid Simulation

The increasing penetration of inverter-based resources introduces new dynamic challenges to modern power grids, such as sub- and super-synchronous oscillations and other faster dynamics. These dynamics are typically fast in nature and are difficult to accurately model and analyze using standard transient stability (TS) methods, necessitating the need for electromagnetic transient (EMT) analysis. However, EMT simulations are notoriously slow for large-scale grids due to both equation formulations and computational limitations. To overcome this challenge, EMT-TS hybrid simulation is often used, since it offers a balanced trade-off between accuracy and speed, making it feasible to perform EMT analysis on large systems. One open question about EMT-TS hybrid simulation is the accuracy of the EMT-TS boundary or interface. This paper introduces an error index to quantify EMT-TS hybrid interface errors, identifies conditions where the hybrid simulation approach may become inaccurate, and suggests EMT region expansions to improve the simulation accuracy. Additionally, a three-sequence hybrid interface model is proposed to mitigate inaccuracies caused by unbalanced conditions.

eess.SY↗

arXiv2026

Applicability and Limitation Analysis of PMU Data and Phasor Concept for Low- and High- Frequency Oscillations

Phasor Measurement Units (PMUs) convert high-speed waveform data into low-speed phasor data, which are fundamental to wide-area monitoring and control in power systems, with oscillation detection and localization among their most prominent applications. However, representing electrical waveform signals with oscillations using PMU phasors is effective only for low-frequency oscillations. This paper investigates the root causes of this limitation, focusing on errors introduced by Discrete Fourier Transform (DFT)-based signal processing, in addition to the attenuation effects of anti-aliasing filters, and the impact of low reporting rates. To better represent and estimate waveform signals with oscillations, we propose a more general signal model and a multi-step estimation method that leverages one-cycle DFT, the Matrix Pencil Method, and the Least Squares Method. Numerical experiments demonstrate the superior performance of the proposed signal model and estimation method. Furthermore, this paper reveals that the phasor concept, let alone PMU phasors, can become invalid for waveform signals with high-frequency oscillations characterized by asymmetric sub- and super-synchronous components. These findings highlight the fundamental limitations of PMU data and phasor concept, and emphasize the need to rely on waveform data for analyzing high-frequency oscillations in modern power systems.

eess.SP↗

arXiv2024

Implementing Deep Reinforcement Learning-Based Grid Voltage Control in Real-World Power Systems: Challenges and Insights

Deep reinforcement learning (DRL) holds significant promise for managing voltage control challenges in simulated power grid environments. However, its real-world application in power system operations remains underexplored. This study rigorously evaluates DRL's performance and limitations within actual operational contexts by utilizing detailed experiments across the IEEE 14-bus system, Illinois 200-bus system, and the ISO New England node-breaker model. Our analysis critically assesses DRL's effectiveness for grid control from a system operator's perspective, identifying specific performance bottlenecks. The findings provide actionable insights that highlight the necessity of advancing AI technologies to effectively address the growing complexities of modern power systems. This research underscores the vital role of DRL in enhancing grid management and reliability.

eess.SY↗

arXiv2023

Physics-Aware Neural Dynamic Equivalence of Power Systems

This letter devises Neural Dynamic Equivalence (NeuDyE), which explores physics-aware machine learning and neural-ordinary-differential-equations (ODE-Net) to discover a dynamic equivalence of external power grids while preserving its dynamic behaviors after disturbances. The contributions are threefold: (1) an ODE-Net-enabled NeuDyE formulation to enable a continuous-time, data-driven dynamic equivalence of power systems; (2) a physics-informed NeuDyE learning method (PI-NeuDyE) to actively control the closed-loop accuracy of NeuDyE without an additional verification module; (3) a physics-guided NeuDyE (PG-NeuDyE) to enhance the method's applicability even in the absence of analytical physics models. Extensive case studies in the NPCC system validate the efficacy of NeuDyE, and, in particular, its capability under various contingencies.

eess.SY↗

arXiv2020

A Modal-Space Method for Online Power System Steady-State Stability Monitoring

This paper proposes a novel approach to estimate the steady-state angle stability limit (SSASL) by using the nonlinear power system dynamic model in the modal space. Through two linear changes of coordinates and a simplification introduced by the steady-state condition, the nonlinear power system dynamic model is transformed into a number of single-machine-like power systems whose power-angle curves can be derived and used for estimating the SSASL. The proposed approach estimates the SSASL of angles at all machines and all buses without the need for manually specifying the scenario, i.e. setting sink and source areas, and also without the need for solving multiple nonlinear power flows. Case studies on 9-bus and 39-bus power systems demonstrate that the proposed approach is always able to capture the aperiodic instability in an online environment, showing promising performance in the online monitoring of the steady-state angle stability over the traditional power flow-based analysis.

eess.SY↗

arXiv2018

Using Passivity Theory to Interpret the Dissipating Energy Flow Method

Despite wide-scale deployment of phasor measurement unit technology, locating the sources of low frequency forced oscillations in power systems is still an open research topic. The dissipating energy flow method is one source location technique which has performed remarkably well in both simulation and real time application at ISO New England. The method has several deficiencies, though, which are still poorly understood. This paper borrows the concepts of passivity and positive realness from the controls literature in order to interpret the dissipating energy flow method, pinpoint the reasons for its deficiencies, and set up a framework for improving the method. The theorems presented in this paper are then tested via simulation on a simple infinite bus power system model.

eess.SY↗