arXiv subjects

Slavomir Nemsak

Publications and source records attributed to Slavomir Nemsak.

12 recordsLinked to original sources

arXiv2025

Mesoscale variations of chemical and electronic landscape on the surface of Weyl semimetal Co$_3$Sn$_2$S$_2$ visualized by ARPES and XPS

The multiple crystalline terminations in magnetic Weyl semimetal Co$_3$Sn$_2$S$_2$ display distinct topological and trivial surface states, which have successfully been distinguished experimentally. However, a model of pure terminations is known to be inadequate because these surfaces exhibit a high degree of spatial heterogeneity and point disorder. Here we perform a spectromicroscopy study of the surface chemistry and surface electronic structure using photoemission measurements in combination with first-principles calculations of core levels. We identify an intermediate region with properties distinct from both the sulfur and tin terminations, and demonstrate that the spectral features in this region can be associated with a disordered termination with a varying density of surface tin vacancies. This work establishes heuristics for identifying variable surface disorder using photoemission, an important prerequisite to experimentally establishing the behavior of momentum-space topological surface features subject to variable surface disorder on a single cleave.

cond-mat.mtrl-sci↗

arXiv2025

Chemical and Morphological Transformations of a Ag-Cu Nanocatalyst During CO2 Reduction Reaction

The conversion of CO2 into high-value chemicals through a photoreduction reaction in water is a promising route to reduce the dependence on fossil fuels. Ag nanoparticles can drive this reaction via localized surface plasmon resonance, but their low selectivity limits usage in industry. Enhancing selectivity toward hydrocarbons or alcohols requires addition of a co-catalyst such as Cu. However, the stabilized surface state created by Ag-Cu interactions is still poorly understood. In this work, soft x-ray Ambient-Pressure X-ray Photoelectron Spectroscopy (AP-XPS) and Grazing-Incidence X-ray Scattering (AP-GIXS) were used to investigate the evolution of Ag-Cu nanoparticles under CO2RR-like conditions. AP-XPS revealed Ag and Cu surface and sub-surface diffusion, while AP-GIXS tracked change of shape and size of nanoparticles induced by diffusion mechanics. Under 532 nm laser irradiation, further oxidation of Cu and Ag sub-surface diffusion were observed, providing invaluable insights into the dynamic restructuring of the catalyst under reaction conditions.

cond-mat.mtrl-sci↗

arXiv2024

Resolving the Valence of Iron Oxides by Resonant Photoemission Spectroscopy

Precisely determining the oxidation states of metal cations within variable-valence transition metal oxides remains a significant challenge, yet it is crucial for understanding and predicting the properties of these technologically important materials. Iron oxides, in particular, exhibit a remarkable diversity of electronic structures due to the variable valence states of iron (Fe2+ and Fe3+), however, quantitative analysis using conventional X-ray photoelectron spectroscopy (XPS) is challenging because of significant overlapping of the Fe2p spectra among different oxidation states. In this study, we leverage the intriguing case of Pt supported FeO2 phase of monolayer thickness (ML) as a model system and employ Resonant Photoemission Spectroscopy (ResPES) to directly quantify the cation valence states and compositional ratios in this complex Fe oxide. Our results reveal that this ultrathin FeO2 film (Pt-O-Fe-O), contrary to the +3 valence predicted by density functional theory (DFT), consists of an equal mixture of Fe2+ and Fe3+ cations, yielding an average valence of +2.5. Structurally, FeO2 is likely derived from the Fe3O4 sublattice, featuring an octahedral Fe layer (50% Fe3+ and 50% Fe2+) bonded to upper and lower oxygen layers.

cond-mat.mtrl-sci↗

arXiv2024

Direct observation of phase change accommodating hydrogen uptake in bimetallic nanoparticles

Hydrogen holds great promise as a cleaner alternative to fossil fuels, but its efficient and affordable storage remains a significant challenge. Bimetallic systems, such as Pd-Ni, present a promising option for storing hydrogen. In this study, using the combination of different cuttingedge X-ray and electron techniques, we observed the transformations of Pd-Ni nanoparticles, which initially consist of a NiO-rich shell surrounding a Pd-rich core but undergo a major transformation when interacting with hydrogen. During the hydrogen exposure, the Pd core breaks into smaller pockets, dramatically increasing its surface area and enhancing the hydrogen storage capacity, especially in nanoparticles with lower Pd content. The findings provide deep understanding of the morphological changes at the atomic level during hydrogen storage and contribute for designing cost-effective hydrogen storage using multi-metallic systems.

cond-mat.mtrl-sci↗

arXiv2023

Elucidating the active phases of CoOx films on Au(111) in the CO Oxidation Reaction

Using CoOx thin films supported on Au(111) single crystal surfaces as model catalysts for the CO oxidation reaction we show that three reaction regimes exist in response to chemical and topographic restructuring of the CoOx catalyst as a function of reactant gas phase CO/O2 stoichiometry a finding that highlights the versatility of catalysts and their evolution in response to reaction conditions. Under oxygen-lean conditions and moderate temperatures (below 150C degrees) partially oxidized films containing CoO were found to be efficient catalysts. In contrast, stoichiometric CoO films containing only Co2+ form carbonates in the presence of CO that poison the reaction below 300 C degrees. Under oxygen-rich conditions a more oxidized catalyst phase forms containing Co3+ species that is effective in a wide temperature range. Resonant photoemission spectroscopy (ResPES) revealed the unique role of Co3+ sites in catalyzing the CO oxidation. DFT calculations provided deeper insights into the pathway and free energy barriers for the reactions on these oxide phases.

cond-mat.mtrl-sci↗

arXiv2022

Copper migration and surface oxidation of $\text{Cu}_{x}\text{Bi}_2\text{Se}_3$ in ambient pressure environments

Chemical modifications such as intercalation can be used to modify surface properties or to further functionalize the surface states of topological insulators. Using ambient pressure X-ray photoelectron spectroscopy, we report copper migration in $\text{Cu}_{x}\text{Bi}_2\text{Se}_3$, which occurs on a timescale of hours to days after initial surface cleaving. The increase in near-surface copper proceeds along with the oxidation of the sample surface and large changes in the selenium content. These complex changes are further modelled with core-level spectroscopy simulations, which suggest a composition gradient near the surface which develops with oxygen exposure. Our results shed light on a new phenomenon that must be considered for intercalated topological insulators$\unicode{x2014}$and intercalated materials in general$\unicode{x2014}$that surface chemical composition can change when specimens are exposed to ambient conditions.

cond-mat.mes-hall↗

arXiv2021

Near total reflection X-ray photoelectron spectroscopy: Quantifying chemistry at solid/liquid and solid/solid interfaces

Near total reflection regime has been widely used in X-ray science, specifically in grazing incidence small angle X-ray scattering and in hard X-ray photoelectron spectroscopy. In this work, we introduce some practical aspects of using near total reflection in ambient pressure X-ray photoelectron spectroscopy and apply this technique to study chemical concentration gradients in a substrate/photoresist system. Experimental data are accompanied by X-ray optical and photoemission simulations to quantitatively probe the photoresist and the interface with the depth accuracy of ~1 nm. Together, our calculations and experiments confirm that near total reflection X-ray photoelectron spectroscopy is a suitable method to extract information from buried interfaces with highest depth-resolution, which can help address open research questions regarding our understanding of concentration profiles, electrical gradients, and charge transfer phenomena at such interfaces. The presented methodology is especially attractive for solid/liquid interface studies, since it provides all the strengths of a Bragg-reflection standing-wave spectroscopy without the need of an artificial multilayer mirror serving as a standing wave generator, thus dramatically simplifying the sample synthesis.

physics.app-ph↗

arXiv2021

Layer-Resolved Many-Electron Interactions in Delafossite PdCoO2 from Standing-Wave Photoemission Spectroscopy

When a three-dimensional material is constructed by stacking different two-dimensional layers into an ordered structure, new and unique physical properties can emerge. An example is the delafossite PdCoO2, which consists of alternating layers of metallic Pd and Mott-insulating CoO2 sheets. To understand the nature of the electronic coupling between the layers that gives rise to the unique properties of PdCoO2, we revealed its layer-resolved electronic structure combining standing-wave X-ray photoemission spectroscopy and ab initio many-body calculations. Experimentally, we have decomposed the measured valence band spectrum into contributions from Pd and CoO2 layers. Computationally, we find that many-body interactions in Pd and CoO2 layers are highly different. Holes in the CoO2 layer interact strongly with charge-transfer excitons in the same layer, whereas holes in the Pd layer couple to plasmons in the Pd layer. Interestingly, we find that holes in states hybridized across both layers couple to both types of excitations (charge-transfer excitons or plasmons), with the intensity of photoemission satellites being proportional to the projection of the state onto a given layer. This establishes satellites as a sensitive probe for inter-layer hybridization. These findings pave the way towards a better understanding of complex many-electron interactions in layered quantum materials.

cond-mat.mtrl-sci↗

arXiv2017

Probing frontier orbital energies of (Co9(P2W15)3) polyoxometalate clusters at molecule-metal and molecule-water interfaces

Functionalization of polyoxotungstates with organoarsonate co-ligands enabling surface decoration was explored for the triangular cluster architectures of the composition [CoII9(H2O)6(OH)3(p-RC6H4AsVO3)2(α-PV2WVI15O56)3]25-({Co9(P2W15)3}, R = H or NH2), isolated as Na25[Co9(OH)3(H2O)6(C6H5AsO3)2(P2W15O56)3]86H2O (Na-1) and Na25[Co9(OH)3(H2O)6(H2NC6H4AsO3)2(P2W15O56)3]86H2O (Na-2). The axially oriented para-aminophenyl groups in 2 facilitate the formation of self-assembled monolayers on gold surfaces, and thus provide a viable molecular platform for charge transport studies of magnetically functionalized polyoxometalates. The title systems were isolated and characterized in the solid state and in aqueous solutions, and on metal surfaces. Using conducting tip atomic force microscopy (C-AFM), the energies of {Co9(P2W15)3} frontier molecular orbitals in the surface-bound state were found to directly correlate with cyclic voltammetry data in aqueous solution.

physics.app-ph↗

arXiv2016

Accurate determination of the valence band edge in hard x-ray photoemission spectra using GW theory

We introduce a new method for determining accurate values of the valence-band maximum in x-ray photoemission spectra. Specifically, we align the sharpest peak in the valence-band region of the experimental spectrum with the corresponding feature of a theoretical valence-band density of states curve from ab initio GW theory calculations. This method is particularly useful for soft and hard x-ray photoemission studies of materials with a mixture of valence-band characters, where strong matrix element effects can render standard methods for extracting the valence-band maximum unreliable. We apply our method to hydrogen-terminated boron-doped diamond, which is a promising substrate material for novel solar cell devices. By carrying out photoemission experiments with variable light polarizations, we verify the accuracy of our analysis and the general validity of the method.

cond-mat.mtrl-sci↗

arXiv2015

Functional Materials for Information and Energy Technology: Insights by Photoelectron Spectroscopy

The evolution of both information and energy technology is intimately connected to complex condensed matter systems, the properties of which are determined by electronic and chemical interactions and processes on a broad range of length and time scales. Dedicated photoelectron spectroscopy and spectromicroscopy experiments can provide important insights. We discuss some recent methodological developments with application to relevant questions in spintronics, and towards in-operando studies of resistive switching and electrochemical processes.

cond-mat.mtrl-sci↗

arXiv2014

Strong interlayer coupling in van der Waals heterostructures built from single-layer chalcogenides

Semiconductor heterostructures are the fundamental platform for many important device applications such as lasers, light-emitting diodes, solar cells and high-electron-mobility transistors. Analogous to traditional heterostructures, layered transition metal dichalcogenide (TMDC) heterostructures can be designed and built by assembling individual single-layers into functional multilayer structures, but in principle with atomically sharp interfaces, no interdiffusion of atoms, digitally controlled layered components and no lattice parameter constraints. Nonetheless, the optoelectronic behavior of this new type of van der Waals (vdW) semiconductor heterostructure is unknown at the single-layer limit. Specifically, it is experimentally unknown whether the optical transitions will be spatially direct or indirect in such hetero-bilayers. Here, we investigate artificial semiconductor heterostructures built from single layer WSe2 and MoS2 building blocks. We observe a large Stokes-like shift of ~100 meV between the photoluminescence peak and the lowest absorption peak that is consistent with a type II band alignment with spatially direct absorption but spatially indirect emission. Notably, the photoluminescence intensity of this spatially indirect transition is strong, suggesting strong interlayer coupling of charge carriers. The coupling at the hetero-interface can be readily tuned by inserting hexagonal BN (h-BN) dielectric layers into the vdW gap. The generic nature of this interlayer coupling consequently provides a new degree of freedom in band engineering and is expected to yield a new family of semiconductor heterostructures having tunable optoelectronic properties with customized composite layers.

cond-mat.mes-hall↗