arXiv subjects

Sofia Sheikh

Publications and source records attributed to Sofia Sheikh.

14 recordsLinked to original sources

arXiv2025

COSMIC's Large-Scale Search for Technosignatures during the VLA sky Survey: Survey Description and First Results

Developing algorithms to search through data efficiently is a challenging part of searching for signs of technology beyond our solar system. We have built a digital signal processing system and computer cluster on the backend of the Karl G. Jansky Very Large Array (VLA) in New Mexico in order to search for signals throughout the Galaxy consistent with our understanding of artificial radio emissions. In our first paper, we described the system design and software pipelines. In this paper, we describe a postprocessing pipeline to identify persistent sources of interference, filter out false positives, and search for signals not immediately identifiable as anthropogenic radio frequency interference during the VLA Sky Survey. As of 01 September 2024, the Commensal Open-source Multi-mode Interferometric Cluster had observed more than 950,000 unique pointings. This paper presents the strategy we employ when commensally observing during the VLA Sky Survey and a postprocessing strategy for the data collected during the survey. To test this postprocessing pipeline, we searched toward 511 stars from the $Gaia$ catalog with coherent beams. This represents about 30 minutes of observation during VLASS, where we typically observe about 2000 sources per hour in the coherent beamforming mode. We did not detect any unidentifiable signals, setting isotropic power limits ranging from 10$^{11}$ to 10$^{16}$W.

astro-ph.IM↗

arXiv2023

The Breakthrough Listen Search for Intelligent Life: Technosignature Search of 97 Nearby Galaxies

The Breakthrough Listen search for intelligent life is, to date, the most extensive technosignature search of nearby celestial objects. We present a radio technosignature search of the centers of 97 nearby galaxies, observed by Breakthrough Listen at the Robert C. Byrd Green Bank Telescope. We performed a narrowband Doppler drift search using the turboSETI pipeline with a minimum signal-to-noise parameter threshold of 10, across a drift rate range of $\pm$ 4 Hz\ $s^{-1}$, with a spectral resolution of 3 Hz and a time resolution of $\sim$ 18.25 s. We removed radio frequency interference by using an on-source/off-source cadence pattern of six observations and discarding signals with Doppler drift rates of 0. We assess factors affecting the sensitivity of the Breakthrough Listen data reduction and search pipeline using signal injection and recovery techniques and apply new methods for the investigation of the RFI environment. We present results in four frequency bands covering 1 -- 11 GHz, and place constraints on the presence of transmitters with equivalent isotropic radiated power on the order of $10^{26}$ W, corresponding to the theoretical power consumption of Kardashev Type II civilizations.

astro-ph.IM↗

arXiv2023

On Detecting Interstellar Scintillation in Narrowband Radio SETI

To date, the search for radio technosignatures has focused on sky location as a primary discriminant between technosignature candidates and anthropogenic radio frequency interference (RFI). In this work, we investigate the possibility of searching for technosignatures by identifying the presence and nature of intensity scintillations arising from the turbulent, ionized plasma of the interstellar medium (ISM). Past works have detailed how interstellar scattering can both enhance and diminish the detectability of narrowband radio signals. We use the NE2001 Galactic free electron density model to estimate scintillation timescales to which narrowband signal searches would be sensitive, and discuss ways in which we might practically detect strong intensity scintillations in detected signals. We further analyze the RFI environment of the Robert C. Byrd Green Bank Telescope (GBT) with the proposed methodology and comment on the feasibility of using scintillation as a filter for technosignature candidates.

astro-ph.IM↗

arXiv2023

High-throughput Alloy and Process Design for Metal Additive Manufacturing

Designing alloys for additive manufacturing (AM) presents significant opportunities. Still, the chemical composition and processing conditions required for printability (ie., their suitability for fabrication via AM) are challenging to explore using solely experimental means. In this work, we develop a high-throughput (HTP) computational framework to guide the search for highly printable alloys and appropriate processing parameters. The framework uses material properties from state-of-the-art databases, processing parameters, and simulated melt pool profiles to predict process-induced defects, such as lack-of-fusion, keyholing, and balling. We accelerate the printability assessment using a deep learning surrogate for a thermal model, enabling a 1,000-fold acceleration in assessing the printability of a given alloy at no loss in accuracy when compared with conventional physics-based thermal models. We verify and validate the framework by constructing printability maps for the CoCrFeMnNi Cantor alloy system and comparing our predictions to an exhaustive 'in-house' database. The framework enables the systematic investigation of the printability of a wide range of alloys in the broader Co-Cr-Fe-Mn-Ni HEA system. We identified the most promising alloys that were suitable for high-temperature applications and had the narrowest solidification ranges, and that was the least susceptible to balling, hot-cracking, and the formation of macroscopic printing defects. A new metric for the global printability of an alloy is constructed and is further used for the ranking of candidate alloys. The proposed framework is expected to be integrated into ICME approaches to accelerate the discovery and optimization of novel high-performance, printable alloys.

cond-mat.mtrl-sci↗

arXiv2023

An Automated Fully-Computational Framework to Construct Printability Maps for Additively Manufactured Metal Alloys

In additive manufacturing, the optimal processing conditions need to be determined to fabricate porosity-free parts. For this purpose, the design space for an arbitrary alloy needs to be scoped and analyzed to identify the areas of defects for different laser power-scan speed combinations and can be visualized using a printability map. Constructing printability maps is typically a costly process due to the involvement of experiments, which restricts their application in high-throughput product design. To reduce the cost and effort of constructing printability maps, a fully computational framework is introduced in this work. The framework combines CALPHAD models and a reduced-order model to predict material properties. THen, an analytical thermal model, known as the Eagar-Tsai model, utilizes some of these materials' properties to calculate the melt pool geometry during the AM processes. In the end, printability maps are constructed using material properties, melt pool dimensions, and commonly used criteria for lack of fusion, balling, and keyholing defects. To validate the framework and its general application to laser powder-bed fusion alloys, five common additive manufacturing alloys are analyzed. Furthermore, NiTi-based alloys at three different compositions are evaluated to show the further extension of the framework to alloy systems at different compositions. The defect regions in these printability maps are validated with corresponding experimental observations to compare and benchmark the defect criteria and find the optimal criterion set with the maximum accuracy for each unique material composition. Furthermore, printability maps for NiTi that are obtained from our framework are used in conjunction with process maps resulting from a multi-model framework to guide the fabrication of defect-free additive manufactured parts with tailorable properties and performance.

cond-mat.mtrl-sci↗

arXiv2022

A Search for Radio Technosignatures at the Solar Gravitational Lens Targeting Alpha Centauri

Stars provide an enormous gain for interstellar communications at their gravitational focus, perhaps as part of an interstellar network. If the Sun is part of such a network, there should be probes at the gravitational foci of nearby stars. If there are probes within the solar system connected to such a network, we might detect them by intercepting transmissions from relays at these foci. Here, we demonstrate a search across a wide bandwidth for interstellar communication relays beyond the Sun's innermost gravitational focus at 550 AU using the Green Bank Telescope (GBT) and Breakthrough Listen (BL) backend. As a first target, we searched for a relay at the focus of the Alpha Centauri AB system while correcting for the parallax due to Earth's orbit around the Sun. We searched for radio signals directed at the inner solar system from such a source in the L and S bands. Our analysis, utilizing the turboSETI software developed by BL, did not detect any signal indicative of a non-human-made artificial origin. Further analysis excluded false negatives and signals from the nearby target HD 13908. Assuming a conservative gain of 10^3 in L-band and roughly 4 times that in S-band, a ~1 meter directed transmitter would be detectable by our search above 7 W at 550 AU or 23 W at 1000 AU in L-band, and above 2 W at 550 AU or 7 W at 1000 AU in S-band. Finally, we discuss the application of this method to other frequencies and targets.

astro-ph.IM↗

arXiv2022

Searching the SETI Ellipsoid with Gaia

The SETI Ellipsoid is a geometric method for prioritizing technosignature observations based on the strategy of receiving signals synchronized to conspicuous astronomical events. Precise distances to nearby stars from Gaia makes constraining Ellipsoid crossing times possible. Here we explore the utility of using the Gaia Catalog of Nearby Stars to select targets on the SN 1987A SETI Ellipsoid, as well the Ellipsoids defined by 278 classical novae. Less than 8% of stars within the 100 pc sample are inside the SN 1987A SETI Ellipsoid, meaning the vast majority of nearby stars are still viable targets for monitoring over time. We find an average of 734 stars per year within the 100 pc volume will intersect the Ellipsoid from SN 1987A, with ~10% of those having distance uncertainties from Gaia better than 0.1 lyr.

astro-ph.IM↗

arXiv2022

Opportunities for Technosignature Science in the Astro2020 Report

The Astro2020 report outlines numerous recommendations that could significantly advance technosignature science. Technosignatures refer to any observable manifestations of extraterrestrial technology, and the search for technosignatures is part of the continuum of the astrobiological search for biosignatures. The search for technosignatures is directly relevant to the "World and Suns in Context" theme and "Pathways to Habitable Worlds" program in the Astro2020 report. The relevance of technosignatures was explicitly mentioned in "E1 Report of the Panel on Exoplanets, Astrobiology, and the Solar System," which stated that "life's global impacts on a planet's atmosphere, surface, and temporal behavior may therefore manifest as potentially detectable exoplanet biosignatures, or technosignatures" and that potential technosignatures, much like biosignatures, must be carefully analyzed to mitigate false positives. The connection of technosignatures to this high-level theme and program can be emphasized, as the report makes clear the purpose is to address the question "Are we alone?" This question is also presented in the Explore Science 2020-2024 plan as a driver of NASA's mission. This white paper summarizes the potential technosignature opportunities within the recommendations of the Astro2020 report, should they be implemented by funding agencies. The objective of this paper is to demonstrate the relevance of technosignature science to a wide range of missions and urge the scientific community to include the search for technosignatures as part of the stated science justifications for the large and medium programs that include the Infrared/Optical/Ultraviolet space telescope, Extremely Large Telescopes, probe-class far-infrared and X-ray missions, and various facilities in radio astronomy.

astro-ph.IM↗

arXiv2021

The Breakthrough Listen Search for Intelligent Life: Searching for Technosignatures in Observations of TESS Targets of Interest

Exoplanetary systems are prime targets for the Search for Extraterrestrial Intelligence (SETI). With the recent uptick in the identification of candidate and confirmed exoplanets through the work of missions like the Transiting Exoplanet Survey Satellite (TESS), we are beginning to understand that Earth-like planets are common. In this work, we extend the Breakthrough Listen (BL) search for extraterrestrial intelligence to include targeted searches of stars identified by TESS as potential exoplanet hosts. We report on 113 30-min cadence observations collected for 28 targets selected from the TESS Input Catalog (TIC) from among those identified as containing signatures of transiting planets. The targets were searched for narrowband signals from 1-11 GHz using the turboSETI pipeline architecture modified for compatibility with the Google Cloud environment. Data were searched for drift rates of +/-4 Hz/s above a minimum signal-to-noise threshold of 10, following the parameters of previous searches conducted by Price et al. (2020) and Enriquez et al. (2017). The observations presented in this work establish some of the deepest limits to date over such a wide band (1-11 GHz) for life beyond Earth. We determine that fewer than 12.72% of the observed targets possess transmitters operating at these frequencies with an Equivalent Isotropic Radiated Power (EIRP) greater than our derived threshold of 4.9*10^(14) W.

astro-ph.EP↗

arXiv2021

The Breakthrough Listen Search for Intelligent Life: MeerKAT Target Selection

New radio telescope arrays offer unique opportunities for large-scale commensal SETI surveys. Ethernet-based architectures are allowing multiple users to access telescope data simultaneously by means of multicast Ethernet subscriptions. Breakthrough Listen will take advantage of this by conducting a commensal SETI survey on the MeerKAT radio telescope in South Africa. By subscribing to raw voltage data streams, Breakthrough Listen will be able to beamform commensally anywhere within the field of view during primary science observations. The survey will be conducted with unprecedented speed by forming and processing 64 coherent beams simultaneously, allowing the observation of several million objects within a few years. Both coherent and incoherent observing modes are planned. We present the list of desired sources for observation and explain how these sources were selected from the Gaia DR2 catalog. Given observations planned by MeerKAT's primary telescope users, we discuss their effects on the commensal survey and propose a commensal observing strategy in response. Finally, we outline our proposed approach towards observing one million nearby stars and analyse expected observing progress in the coming years.

astro-ph.IM↗

arXiv2020

The Breakthrough Listen Search for Intelligent Life: Public Data, Formats, Reduction and Archiving

Breakthrough Listen is the most comprehensive and sensitive search for extraterrestrial intelligence (SETI) to date, employing a collection of international observational facilities including both radio and optical telescopes. During the first three years of the Listen program, thousands of targets have been observed with the Green Bank Telescope (GBT), Parkes Telescope and Automated Planet Finder. At GBT and Parkes, observations have been performed ranging from 700 MHz to 26 GHz, with raw data volumes averaging over 1PB / day. A pseudo-real time software spectroscopy suite is used to produce multi-resolution spectrograms amounting to approximately 400 GB hr^-1 GHz^-1 beam^-1. For certain targets, raw baseband voltage data is also preserved. Observations with the Automated Planet Finder produce both 2-dimensional and 1-dimensional high resolution (R~10^5) echelle spectral data. Although the primary purpose of Listen data acquisition is for SETI, a range of secondary science has also been performed with these data, including studies of fast radio bursts. Other current and potential research topics include spectral line studies, searches for certain kinds of dark matter, probes of interstellar scattering, pulsar searches, radio transient searches and investigations of stellar activity. Listen data are also being used in the development of algorithms, including machine learning approaches to modulation scheme classification and outlier detection, that have wide applicability not just for astronomical research but for a broad range of science and engineering. In this paper, we describe the hardware and software pipeline used for collection, reduction, archival, and public dissemination of Listen data. We describe the data formats and tools, and present Breakthrough Listen Data Release 1.0 (BLDR 1.0), a defined set of publicly-available raw and reduced data totalling 1 PB.

astro-ph.IM↗

arXiv2020

Breakthrough Listen Search for Technosignatures Towards the Kepler-160 System

We have conducted a search for artificial radio emission associated with the Kepler-160 system following the report of the discovery of the Earth-like planet candidate KOI-456.04 on 2020 June 4 (arXiv:1905.09038v2). Our search targeted both narrowband (2.97 Hz) drifting ($\pm 4$ Hz s$^{-1})$ and wideband pulsed (5 ms at all bandwidths) artificially-dispersed technosignatures using the turboSETI (arXiv:1709.03491v2) and SPANDAK pipelines, respectively, from 1-8 GHz. No candidates were identified above an upper limit Equivalent Isotropic Radiated Power (EIRP) of $5.9 \times 10^{14}$ W for narrowband emission and $7.3 \times 10^{12}$ W for wideband emission. Here we briefly describe our observations and data reduction procedure.

astro-ph.EP↗

arXiv2018

Recommendations from the Ad Hoc Committee on SETI Nomenclature

The Ad Hoc Committee on SETI Nomenclature was convened at the suggestion of Frank Drake after the Decoding Alien Intelligence Workshop at the SETI Institute in March 2018. The purpose of the committee was to recommend standardized definitions for terms, especially those that are used inconsistently in the literature and the scientific community. The committee sought to recommend definitions and terms that are a compromise among several desirable but occasionally inconsistent properties for such terms: 1) Consistency with the historical literature and common use in the field; 2) Consistency with the present literature and common use in the field; 3) Precision of meaning; 4) Consistency with the natural (i.e. everyday, non-jargon) meanings of terms; 5) Compatibility with non-English terms and definitions. The definitions in this report are restricted to technical, SETI contexts, where they may have jargon senses different from their everyday senses. In many cases we include terms only to deprecate them (in the sense of "to withdraw official support for or discourage the use of...in favor of a newer or better alternative", Merriam-Webster sense 4). This is a consensus document that the committee members all endorse; however, in many cases the individual members have (or have expressed in the past) more nuanced opinions on these terms that are not fully reflected here, for instance Almár (2008, Acta Astronautica, 68, 351), Denning (2008, NASA-SP-2009-4802 Ch. 3 pp.63-124), and Wright (2018, arXiv:1803.06972).

physics.pop-ph↗

arXiv2017

The Breakthrough Listen Search for Intelligent Life: Target Selection of Nearby Stars and Galaxies

We present the target selection for the Breakthrough Listen search for extraterrestrial intelligence during the first year of observations at the Green Bank Telescope, Parkes Telescope and Automated Planet Finder. On the way to observing 1,000,000 nearby stars in search of technological signals, we present three main sets of objects we plan to observe in addition to a smaller sample of exotica. We choose the 60 nearest stars, all within 5.1 pc from the sun. Such nearby stars offer the potential to observe faint radio signals from transmitters having a power similar to those on Earth. We add a list of 1649 stars drawn from the Hipparcos catalog that span the Hertzprung-Russell diagram, including all spectral types along the main sequence, subgiants, and giant stars. This sample offers diversity and inclusion of all stellar types, but with thoughtful limits and due attention to main sequence stars. Our targets also include 123 nearby galaxies composed of a "morphological-type-complete" sample of the nearest spirals, ellipticals, dwarf spherioidals, and irregulars. While their great distances hamper the detection of technological electromagnetic radiation, galaxies offer the opportunity to observe billions of stars simultaneously and to sample the bright end of the technological luminosity function. We will also use the Green Bank and Parkes telescopes to survey the plane and central bulge of the Milky Way. Finally, the complete target list includes several classes of exotica, including white dwarfs, brown dwarfs, black holes, neutron stars, and asteroids in our Solar System.

astro-ph.IM↗