Searcharxiv⌕ Search

arXiv subjects

Son T. Le

Publications and source records attributed to Son T. Le.

At least 19 recordsLinked to original sources
arXiv2026

Transport Enhancement and In Situ Control of Electronic Correlation via Photoinduced Modulation Doping of van der Waals Heterostructures

Modulation doping, a well-established technique for traditional semiconductor heterostructures, is a promising approach for tailoring carrier concentration in 2D materials devices. In this letter we report on photoinduced modulation doping in hBN-graphene-hBN-SiO2 heterostructures utilizing standard white light sources and no additional fabrication complexity. We establish the use of this technique to both dope the channel material and to photoanneal devices, providing control over electronic doping and disorder in the graphene channel. We analyze the transport properties by employing Drude and Landauer transport models, highlighting the ability to reversibly tune the mobility and mean scattering length of the graphene with a high degree of accuracy. This tunability allows us to switch our device between the diffusive and quasi-ballistic transport regimes in situ. We utilize the exceptional control our technique provides over local disorder to realize quantum Hall isospin ferromagnetic states in a device whose initial quality would otherwise leave such states unobservable. These results demonstrate precise manipulation of carrier density and charge disorder in van der Waals heterostructures, providing a highly accessible approach to creating high-quality devices capable of realizing correlated electronic states.

cond-mat.mes-hall↗
arXiv2026

Magnetic Field-Mediated Superconducting Logic

While superconductors are highly attractive for energy-efficient computing, fundamental limitations in their logic circuit integration have hindered scaling and led to increased energy consumption. We therefore propose and experimentally demonstrate a novel superconducting switching device utilizing the proximity magnetization from a spin-orbit torque-switched magnet to control the resistivity of a superconductor. We further propose a complete logic family comprised solely of these devices. This novel implementation has the potential to drastically outperform existing superconducting logic families in terms of energy efficiency and scalability.

cs.ET↗
arXiv2025

Assembly of High-Performance van der Waals Devices Using Commercial Polyvinyl Chloride Films

Control over the position, orientation, and stacking order of two-dimensional (2D) materials within van der Waals heterostructures is crucial for applications in electronics, spintronics, optics, and sensing. The most popular strategy for assembling 2D materials uses purpose-built stamps with working surfaces made from one of several different polymers. However, these stamps typically require tedious preparation steps and suffer from poor durability, contamination, and limited applicability to specific 2D materials or surfaces. Here, we demonstrate significant improvements upon current 2D flake transfer and assembly practices by using mechanically durable stamps made from polyvinyl chloride (PVC) thin films. These stamps are simpler to prepare compared with existing methods and can withstand multiple transfer cycles, enabling greater reusability. We use two commercially available PVC films with distinct pick-up and release temperatures. Together, these films also enable polymer-to-polymer flake transfers and stack-and-flip fabrication of inverted heterostructures in one seamless process. Systematic comparisons of cleaning processes confirm the removal of PVC-derived residue from the assembled structures to create atomically clean interfaces. We demonstrate the utility and versatility of these polymer films and transfer process by fabricating graphene/hexagonal boron nitride heterostructure devices with high-performance electrical characteristics. Further, we demonstrate the ability to pick up and to deposit bulk aluminum gallium arsenide nanostructured films, enabling the creation of heterogeneously integrated devices. This technique increases fabrication rates, improves device quality, and enables more complex structures, thereby facilitating nanomaterial assembly in a broad range of applications.

cond-mat.mtrl-sci↗
arXiv2025

Direct-Write Printed Contacts to Layered and 2D Materials

Advancements in fabrication methods have shaped new computing device technologies. Among these methods, depositing electrical contacts to the channel material is fundamental to device characterization. Novel layered and two-dimensional (2D) materials are promising for next-generation computing electronic channel materials. Direct-write printing of conductive inks is introduced as a surprisingly effective, significantly faster, and cleaner method to contact different classes of layered materials, including graphene (semi-metal), MoS2 (semiconductor), Bi-2212 (superconductor), and Fe5GeTe2 (metallic ferromagnet). Based on the electrical response, the quality of the printed contacts is comparable to what is achievable with resist-based lithography techniques. These devices are tested by sweeping gate voltage, temperature, and magnetic field to show that the materials remain pristine post-processing. This work demonstrates that direct-write printing is an agile method for prototyping and characterizing the electrical properties of novel layered materials.

cs.ET↗
arXiv2024

Quantum Hall Transport Measurements of Lateral p-n Junctions Formed via Precise Spatial Photodoping of Graphene/hBN Heterostructures

Doped semiconductors are a central and crucial component of all integrated circuits. By using a combination of white light and a focused laser beam, and exploiting hBN defect states, heterostructures of hBN/Graphene/hBN are photodoped in-operando, reproducibly and reversibly. We demonstrate device geometries with spatially-defined doping type and magnitude. After each optical doping procedure, magnetotransport measurements including quantum Hall measurements are performed to characterize the device performance. In the unipolar (p+-p-p+ and n-n+-n) configurations, we observe quantization of the longitudinal resistance, proving well-defined doped regions and interfaces that are further analyzed by Landauer-Buttiker modeling. Our unique measurements and modeling of these optically doped devices reveal a complete separation of the p- and n-Landau level edge states. The non-interaction of the edge states results in an observed "insulating" state in devices with a bi-polar p-n-p configuration that is uncommon and has not been measured previously in graphene devices. This insulating state could be utilized in high-performance graphene electrical switches. These quantitative magnetotransport measurements confirm that these doping techniques can be applied to any 2D materials encapsulated within hBN layers, enabling versatile, rewritable circuit elements for future computing and memory applications.

cond-mat.mes-hall↗
arXiv2022

How to Report and Benchmark Emerging Field-Effect Transistors

Emerging low-dimensional nanomaterials have been studied for decades in device applications as field-effect transistors (FETs). However, properly reporting and comparing device performance has been challenging due to the involvement and interlinking of multiple device parameters. More importantly, the interdisciplinarity of this research community results in a lack of consistent reporting and benchmarking guidelines. Here we report a consensus among the authors regarding guidelines for reporting and benchmarking important FET parameters and performance metrics. We provide an example of this reporting and benchmarking process for a two-dimensional (2D) semiconductor FET. Our consensus will help promote an improved approach for assessing device performance in emerging FETs, thus aiding the field to progress more consistently and meaningfully.

cond-mat.mtrl-sci↗
arXiv2021

Geometric interference in a high-mobility graphene annulus p-n junction device

The emergence of interference is observed in the resistance of a graphene annulus pn junction device as a result of applying two separate gate voltages. The observed resistance patterns are carefully inspected, and it is determined that the position of the peaks resulting from those patterns are independent of temperature and magnetic field. Furthermore, these patterns are not attributable to Aharonov-Bohm oscillations, Fabry Perot interference at the junction, or moiré potentials. The device data are compared with those of another device fabricated with a traditional Hall bar geometry, as well as with quantum transport simulation data. Since the two devices are of different topological classes, the subtle differences observed in the corresponding measured data indicate that the most likely source of the observed geometric interference patterns is quantum scarring.

cond-mat.mes-hall↗
arXiv2020

Edge Channels of Broken-Symmetry Quantum Hall States in Graphene probed by Atomic Force Microscopy

The quantum Hall (QH) effect, a topologically non-trivial quantum phase, expanded and brought into focus the concept of topological order in physics. The topologically protected quantum Hall edge states are of crucial importance to the QH effect but have been measured with limited success. The QH edge states in graphene take on an even richer role as graphene is distinguished by its four-fold degenerate zero energy Landau level (zLL), where the symmetry is broken by electron interactions on top of lattice-scale potentials but has eluded spatial measurements. In this report, we map the quantum Hall broken-symmetry edge states comprising the graphene zLL at integer filling factors of $ν=0,\pm 1$ across the quantum Hall edge boundary using atomic force microscopy (AFM). Measurements of the chemical potential resolve the energies of the four-fold degenerate zLL as a function of magnetic field and show the interplay of the moiré superlattice potential of the graphene/boron nitride system and spin/valley symmetry-breaking effects in large magnetic fields.

cond-mat.mes-hall↗
arXiv2019

Rapid, Quantitative Therapeutic Screening for Alzheimer's Enzymes Enabled by Optimal Signal Transduction with Transistors

We show that simple, commercially sourced n-channel silicon field-effect transistors (nFETs) operating under closed loop control exhibit an ~3-fold improvement in pH readout resolution to (7.2+/-0.3)x10^-3 at a bandwidth of 10 Hz when compared with the open loop operation commonly employed by integrated ion-sensitive field-effect transistors (ISFETs). We leveraged the improved nFET performance to measure the change in solution pH arising from the activity of a pathological form of the kinase Cdk5, an enzyme implicated in Alzheimer's disease, and showed quantitative agreement with previous measurements. The improved pH resolution was realized while the devices were operated in a remote sensing configuration with the pH sensing element off-chip and connected electrically to the FET gate terminal. We compared these results with those measured by using a custom-built dual-gate 2D field-effect transistor (dg2DFET) fabricated with 2D semi-conducting MoS2 channels and a moderate device gain, alpha=8. Under identical solution conditions the pH resolution of the nFETs was only 2-fold worse than the dg2DFETs pH resolution of (3.9+/-0.7)x10^-3. Finally, using the nFETs, we demonstrated the effectiveness of a custom polypeptide, p5, as a therapeutic agent in restoring the function of Cdk5. We expect that the straight-forward modifications to commercially sourced nFETs demonstrated here will lower the barrier to widespread adoption of these remote-gate devices and enable sensitive bioanalytical measurements for high throughput screening in drug discovery and precision medicine applications.

physics.app-ph↗
arXiv2019

Strong equilibration of Landau levels edge-states at the graphene edge

We present the results of an experimental study of the interaction of quantized Landau level (LL) edge-states at the physical edge of graphene by using a graphene pn junction device with a ring-shaped geometry for the channel. The unique device geometry allows the interactions between edge-states to be probed at both electrostatic edges defined by pn junctions and at the graphene physical edge. Measurements show that while the lowest LL edge-state is decoupled from the other LLs along the electrostatic junction, all the edge-states strongly equilibrate at the graphene physical edge despite the relatively short distance that they travel along the edge in our device. These findings are fundamental for the engineering of future high-performance graphene field-effect transistors based upon electron optics.

cond-mat.mes-hall↗
arXiv2019

Reproducible Performance Improvements to Monolayer MoS2 Transistors through Exposed Material Forming Gas Annealing

Metal-mediated exfoliation has been demonstrated as a promising approach for obtaining large-area flakes of 2D materials to fabricate prototypical nanoelectronics. However, several processing challenges related to organic contamination at the interfaces of the 2D material and the gate oxide must be overcome to realize robust devices with high yield. Here, we demonstrate an optimized process to realize high-performance field-effect transistor (FET) arrays from large-area (~5000 um2) monolayer MoS2 with a yield of 85 %. A central element of this process is an exposed material forming gas anneal (EM-FGA) that results in uniform FET performance metrics (i.e., field-effect mobilities, threshold voltages, and contact performance). Complementary analytical measurements show that the EM-FGA process reduces deleterious channel doping effects by decreasing organic contamination, while also reducing the prevalence of insulating molybdenum oxide, effectively improving the MoS2-gate oxide interface. The uniform FET performance metrics and high device yield achieved by applying the EM-FGA technique on large-area 2D material flakes will help advance the fabrication of complex 2D nanoelectronics devices and demonstrates the need for improved engineering of the 2D material-gate oxide interface.

cond-mat.mtrl-sci↗
arXiv2018

Quantum Capacitance-Limited MoS2 Biosensors Enable Remote Label-Free Enzyme Measurements

We have demonstrated atomically thin, quantum capacitance-limited, field-effect transistors (FETs) that enable the detection of pH changes with ~75-fold higher sensitivity (4.4 V/pH) over the Nernst value of 59 mV/pH at room temperature when used as a biosensor. The transistors, which are fabricated from a monolayer of MoS2 with a room temperature ionic liquid (RTIL) in place of a conventional oxide gate dielectric, exhibit very low intrinsic noise resulting in a pH limit of detection (LOD) of 92x10^-6 at 10 Hz. This high device performance, which is a function of the structure of our device, is achieved by remotely connecting the gate to a pH sensing element allowing the FETs to be reused. Because pH measurements are fundamentally important in biotechnology, the low limit of detection demonstrated here will benefit numerous applications ranging from pharmaceutical manufacturing to clinical diagnostics. As an example, we experimentally quantified the function of the kinase Cdk5, an enzyme implicated in Alzheimer's disease, at concentrations that are 5-fold lower than physiological values, and with sufficient time-resolution to allow the estimation of both steady-state and kinetic parameters in a single experiment. The high sensitivity, low LOD and fast turnaround time of the measurements will allow the development of early diagnostic tools and novel therapeutics to detect and treat neurological conditions years before currently possible.

q-bio.QM↗
arXiv2017

Does the Cross-Talk Between Nonlinear Modes Limit the Performance of NFDM Systems?

We show a non-negligible cross-talk between nonlinear modes in Nonlinear Frequency-Division Multiplexed system when data is modulated over the nonlinear Fourier spectrum, both the continuous spectrum and the discrete spectrum, and transmitted over a lumped amplified fiber link. We evaluate the performance loss if the cross-talks are neglected.

eess.SP↗