arXiv subjects

Songhee Choi

Publications and source records attributed to Songhee Choi.

6 recordsLinked to original sources

arXiv2025

Observation of square-like moire lattice and quasicrystalline order in twisted rock-salt nitrides

Twistronics, which exploits moire modulation of lattice and electronic structures in twisted bilayers, has emerged as a powerful approach to engineer novel quantum states. Recent efforts have expanded beyond two dimensional van der Waals (vdWs) crystals to more complex, strongly correlated materials, where interfacial moire effects can dominate physical properties. Here we demonstrate a generalizable route to fabricate twisted bilayers of transition metal nitrides with vdWs like interfaces, using freestanding CrN membranes as a model system. Twisted bilayer CrN (tCrN) is realized by employing cubic alkaline earth metal monoxides as sacrificial layers, enabling the assembly of clean, controllable interfaces. Electron ptychography reveals well defined, periodic square moire superlattices in tCrN. For a twist angle of 16.3 degree, we identify a nearly commensurate moire lattice with coincident Cr columns, whereas at 45 degree we uncover localized octagonal quasicrystalline order with clear self-similarity. These results establish a practical platform for twisted TMNs and open avenues to explore moire-induced atomic configurations and emergent correlated phenomena in nitride based heterostructures.

cond-mat.mtrl-sci↗

arXiv2025

Unusual strain relaxation and Dirac semimetallic behavior in epitaxial antiperovskite nitrides

Antiperovskite nitrides (X3AN) are the structural analogues to perovskite oxides, while their epitaxial growth and electronic properties remain largely unexplored. We report the successful synthesis of Ni3InN thin films on substrates with different lattice constants. First-principles phonon calculations confirm the dynamical stability of cubic phase Ni3InN, providing the basis for epitaxial synthesis. High-resolution scanning transmission electron microscopy reveals coherent (001)-oriented interfaces when Ni3InN is grown on LaAlO3 and SrTiO3, while an unexpected (011)-orientation forms on DyScO3, aligning with surface-energy predictions. Transport measurements highlight a strain-controlled Fermi-liquid behavior, correlated with variations in the Ni-3d bandwidth and hybridization. Band structure calculations reveal a dual character near the Fermi level: a high-mobility Dirac-like band and a Ni-3d manifold that drives strange-metal transport with a reduced slope compared to oxide perovskites. The formal Ni valence (+2/3) places Ni3InN in an overdoped correlated-metal regime, distinguishing from most perovskite oxides. This positions antiperovskite nitrides as a promising platform for investigating overdoped Fermi liquids and strange-metal behavior.

cond-mat.mtrl-sci↗

arXiv2025

Advancing Antiferromagnetic Nitrides via Metal Alloy Nitridation

Nitride materials, valued for their structural stability and exceptional physical properties, have garnered significant interest in both fundamental research and technological applications. The fabrication of high-quality nitride thin films is essential for advancing their use in microelectronics and spintronics. Yet, achieving single-crystal nitride thin films with excellent structural integrity remains a challenge. Here, we introduce a straightforward yet innovative metallic alloy nitridation technique for the synthesis of stable single-crystal nitride thin films. By subjecting metal alloy thin films to a controlled nitridation process, nitrogen atoms integrate into the lattice, driving structural transformations while preserving high epitaxial quality. Combining nanoscale magnetic imaging with a diamond nitrogen-vacancy (NV) probe, X-ray magnetic linear dichroism, and comprehensive transport measurements, we confirm that the nitridated films exhibit a robust antiferromagnetic character with a zero net magnetic moment. This work not only provides a refined and reproducible strategy for the fabrication of nitride thin films but also lays a robust foundation for exploring their burgeoning device applications.

cond-mat.mtrl-sci↗

arXiv2024

Confined Magnetization at the Sublattice-Matched Ruthenium Oxide Heterointerface

Creating a heterostructure by combining two magnetically and structurally distinct ruthenium oxides is a crucial approach for investigating their emergent magnetic states and interactions. Previously, research has predominantly concentrated on the intrinsic properties of the ferromagnet SrRuO3 and recently discovered altermagnet RuO2 solely. Here, we engineered an ultrasharp sublattice-matched heterointerface using pseudo-cubic SrRuO3 and rutile RuO2, conducting an in-depth analysis of their spin interactions. Structurally, to accommodate the lattice symmetry mismatch, the inverted RuO2 layer undergoes an in-plane rotation of 18 degrees during epitaxial growth on SrRuO3 layer, resulting in an interesting and rotational interface with perfect crystallinity and negligible chemical intermixing. Performance-wise, the interfacial layer of 6 nm in RuO2 adjacent to SrRuO3 exhibits a nonzero magnetic moment, contributing to an enhanced anomalous Hall effect (AHE) at low temperatures. Furthermore, our observations indicate that, in contrast to SrRuO3 single layers, the AHE of [(RuO2)15/(SrRuO3)n] heterostructures shows nonlinear behavior and reaches its maximum when the SrRuO3 thickness reaches tens of nm. These results suggest that the interfacial magnetic interaction surpasses that of all-perovskite oxides (~5-unit cells). This study underscores the significance and potential applications of magnetic interactions based on the crystallographic asymmetric interfaces in the design of spintronic devices.

cond-mat.mtrl-sci↗

arXiv2024

A single-phase epitaxially grown ferroelectric perovskite nitride

The integration of ferroelectrics with semiconductors is crucial for developing functional devices, such as field-effect transistors, tunnel junctions, and nonvolatile memories. However, the synthesis of high-quality single-crystalline ferroelectric nitride perovskites has been limited, hindering a comprehensive understanding of their switching dynamics and potential applications. Here we report the synthesis and characterizations of epitaxial single-phase ferroelectric cerium tantalum nitride (CeTaN3) on both oxides and semiconductors. The polar symmetry of CeTaN3 was confirmed by observing the atomic displacement of central ions relative to the center of the TaN6 octahedra, as well as through optical second harmonic generation. We observed switchable ferroelectric domains in CeTaN3 films using piezo-response force microscopy, complemented by the characterization of square-like polarization-electric field hysteresis loops. The remanent polarization of CeTaN3 reaches approximately 20 uC/cm2 at room temperature, consistent with theoretical calculations. This work establishes a vital link between ferroelectric nitride perovskites and their practical applications, paving the way for next-generation information and energy-storage devices with enhanced performance, scalability, and manufacturability.

cond-mat.mtrl-sci↗

arXiv2023

Strain mediated phase crossover in Ruddlesden Popper nickelates

Recent progress on the signatures of pressure-induced high temperature superconductivity in Ruddlesden Popper (RP) nickelates (Lan+1NinO3n+1) has attracted growing interest in both theoretical calculations and experimental efforts. The fabrication of high-quality single crystalline RP nickelate thin films is critical for possible reducing the superconducting transition pressure and advancing applications in microelectronics in the future. In this study, we report the observations of an active phase transition in RP nickelate films induced by misfit strain. We found that RP nickelate films favor the perovskite structure (n = infinite) under tensile strains, while compressive strains stabilize the La3Ni2O7 (n = 2) phase. The selection of distinct phases is governed by the strain dependent formation energy and electronic configuration. In compressively strained La3Ni2O7, we experimentally determined splitting energy is ~0.2 eV and electrons prefer to occupy in-plane orbitals. First principles calculations unveil a robust coupling between strain effects and the valence state of Ni ions in RP nickelates, suggesting a dual driving force for the inevitable phase co-existence transition in RP nickelates. Our work underscores the sensitivity of RP nickelate formation to epitaxial strain, presenting a significant challenge in fabricating pure-phase RP nickelate films. Therefore, special attention to stacking defects and grain boundaries between different RP phases is essential when discussing the pressure-induced superconductivity in RP nickelates.

cond-mat.supr-con↗