arXiv subjects

Songling Huang

Publications and source records attributed to Songling Huang.

At least 19 recordsLinked to original sources

arXiv2026

Design and Initial Test of the Weighing Unit for Tsinghua Tabletop Kibble Balance

This paper presents a customized weighing unit developed for the Tsinghua tabletop Kibble balance. The system is based on a flexure hinge mechanism sourced from a commercial weighing cell, with a major modification to the feedback control loop. The redesigned loop incorporates a capacitive displacement sensor for high-resolution position detection and a novel PID control strategy that ensures both fast dynamic response and high static stability. Initial characterization results demonstrate a repeatability better than 0.1 mg in air for 1 kg mass exchanges, validating the system's potential for high-accuracy mass metrology in Kibble balances.

physics.ins-det↗

arXiv2026

Design and Verification of a New Current Source for Tsinghua Tabletop Kibble Balance

This paper presents an ultra-stable current source tailored for the one-mode, two-phase (OMTP) measurement scheme in Tsinghua tabletop Kibble balances. To achieve simultaneous high resolution and nA/A-level stability, a composite 'coarse-fine' control topology is proposed, utilizing a dual-DAC architecture and an active digital feedback loop. Experimental results show that the Allan deviation reaches 1 nA/A at an integration time of approximately 3 minutes, representing a tenfold improvement in measurement speed compared to commercial-source-based setups. Furthermore, the design offers a significant cost advantage, providing a satisfying option for high-precision, cost-effective mass realization.

physics.ins-det↗

arXiv2026

An Optical System for Monitoring Coil Parasitic Motion and Mass Position for Tsinghua Tabletop Kibble Balance

This paper presents a novel seven-channel optical measurement system for monitoring coil parasitic motion and mass position in the Tsinghua Tabletop Kibble balance. The system employs seven spectrally-confocal displacement sensors arranged in a distributed configuration to simultaneously measure the coil's translational ($x_{\rm{c}}, y_{\rm{c}}$), rotational ($\theta_x,\theta_y$) degrees of freedom, and the mass position offset ($x_{\rm{m}}, y_{\rm{m}}$) due to corner errors. Three vertically oriented sensors target an equilateral triangle target rigidly connected to the coil, enabling real-time calculation of tilt angles through geometric relationships. Two horizontally oriented sensors measure the translational displacement of a frame target on the coil assembly. Two additional horizontal sensors monitor the mass position to quantify corner errors. The initial experimental setup has been completed, featuring sufficient resolution and minimal signal loss, providing a new approach for alignment adjustment and corner error compensation in high-precision Kibble balances.

physics.ins-det↗

arXiv2026

Status of the Tsinghua Tabletop Kibble Balance

This paper reports on the status of the Tsinghua tabletop Kibble balance experiment, aiming to deliver a mass calibration instrument for kilogram realizations in accordance with the new International System of Units (SI). Major progress since 2024 in different aspects, i.e., electrical, magnetic, mechanical, and optical, is presented. The primary weighing and velocity measurement results are discussed.

physics.ins-det↗

arXiv2026

Recent Advances in Tabletop Kibble Balance -- KBmini

This paper presents recent advances in the KBmini Kibble balance, a tabletop system for E2-accuracy mass calibration up to 1 kg. The $Bl(z)$ profile is characterized by manually setting the magnet at different vertical positions, and the extremum point is selected as the weighing position. The spring constant of the weighing cell around this point is measured. With a new coil of a larger number of turns and a multi-harmonic excitation technique, a near-constant velocity profile over a moving range of 180 $\mu$m, producing an induced-voltage flat-top region exceeding 1 V, is achieved. These results establish a foundation for subsequent mass calibration experiments.

physics.ins-det↗

arXiv2026

Design of a Miniature Kibble Balance for Kilogram-Scale Mass Calibration -- KBmini

Tabletop version Kibble balances are a significant developing trend for mass realizations following the revised International System of Units. A key innovation through the miniaturization of the Kibble balance from a large-scale instrument into a tabletop device is making the quantum-based realization of mass accessible to a wider range of calibration laboratories and industries. This paper presents a tabletop Kibble balance design at Tsinghua University targeting E2-accuracy class mass calibrations from 1 g to 1 kg. For calibrating a mass of 1 kg, for instance, the required relative standard measurement uncertainty must be below 0.27 ppm to meet E2-accuracy class. Major components and features of the proposed system are discussed. A novel method of multi-harmonic excitation is proposed to improve the coil-motion linearity during velocity measurement. We show that injecting odd-order harmonics into the motion-driving current can significantly improve the uniformity of the coil's moving velocity, while the second-order component can address the asymmetry between upward and downward movements. This achieves a flat velocity $\Delta v/v< 5\%$ over 60% of the motion cycle.

physics.ins-det↗

arXiv2025

Self-Error Correcting Method for Magnetic-Array-Type Current Sensors in Multi-Core Cable Applications

Data-driven methods enable online assessment of error states in magnetic-array-type current sensors, and long-term measurement stability can be enhanced through further self-error correction. However, when the magnetic-array-type current sensors are applied to multi-conductor systems such as multi-core cables, the time-varying correlations among conductor currents may degrade the performance of multi-latent-variable data-driven models for error evaluation. To address this issue, this paper proposes a robust self-error correcting method for magnetic-array-type current sensors even under significant variations in phase current correlations (e.g., large fluctuations in three-phase current imbalance). By incorporating phase current decoupling and principal component analysis (PCA), the correlation analysis of multi-latent variables (i.e., multi-conductor currents) is transformed into a single-latent-variable (corresponding to single phase current) modeling problem. Experimental results demonstrate that the proposed method effectively detects error drifts of magnetic field sensors as low as $2\times10^{-3}$ in relative error and $2\times10^{-3}$ rad in phase error. Accurate evaluation and correction of each magnetic field sensor's error drifts substantially eliminates the overall error drift in the magnetic-array-type current sensor, validating the feasibility and effectiveness of the proposed self-error correcting method.

physics.ins-det↗

arXiv2025

An Approach for Restoring Magnetic Field Uniformity in Openable BIPM-Type Kibble Balance Magnets

The Kibble balance realizes the kilogram by linking mechanical and electrical quantities via a magnet system. In an improved BIPM-type magnet design by Tsinghua University, an open/close surface was incorporated, facilitating operation. However, an unavoidable mechanical air gap at the splitting plane introduces asymmetry in the magnetic flux density profile, degrading field uniformity. This study proposes a two-step yoke compensation method to restore symmetry by adjusting the upper outer yoke's inner radius and the splitting gap height. Finite element simulations show linear relationships between asymmetry and these parameters, enabling predictive compensation. Experimental results confirm that sequential tuning successfully eliminates asymmetry and recovers the designed uniform field range. The method provides an effective solution for enhancing magnetic field quality in openable Kibble balance magnets.

physics.ins-det↗

arXiv2025

An Evaluation of External Magnetic Flux Error in Magnet-Moving Kibble balances

The magnet-moving measurement scheme in Kibble balances avoids displacing force-sensitive components, such as the weighing cell, and enables a broader magnetic profile measurement range during the velocity phase. However, this mechanism introduces the risk of asymmetry in the $Bl$ measurement due to external magnetic flux, leading to a potential systematic error in the final measurement results. Using the Tsinghua tabletop Kibble balance magnet as a case study, this paper investigates the error mechanism through finite element analysis and experimental investigations. An evaluation method combining external weak-field measurements with attenuation factor analysis is proposed to assess external magnetic flux errors in magnet-moving measurement schemes. The findings demonstrate that selecting an optimal weighing position can reduce the far-end flux effect to the order of $10^{-9}$. In contrast, the near-end flux effect can be quantified by monitoring the magnetic field surrounding the magnet system. In the Tsinghua Kibble balance system, we show that with proper control of external flux sources, the relative error can be reduced below $1 \times 10^{-8}$ without requiring additional magnetic shielding.

physics.ins-det↗

arXiv2025

Metering Error Estimation of Fast-Charging Stations Using Charging Data Analytics

Accurate electric energy metering (EEM) of fast charging stations (FCSs), serving as critical infrastructure in the electric vehicle (EV) industry and as significant carriers of vehicle-to-grid (V2G) technology, is the cornerstone for ensuring fair electric energy transactions. Traditional on-site verification methods, constrained by their high costs and low efficiency, struggle to keep pace with the rapid global expansion of FCSs. In response, this paper adopts a data-driven approach and proposes the measuring performance comparison (MPC) method. By utilizing the estimation value of state-of-charge (SOC) as a medium, MPC establishes comparison chains of EEM performance of multiple FCSs. Therefore, the estimation of EEM errors for FCSs with high efficiency is enabled. Moreover, this paper summarizes the interfering factors of estimation results and establishes corresponding error models and uncertainty models. Also, a method for discriminating whether there are EEM performance defects in FCSs is proposed. Finally, the feasibility of MPC method is validated, with results indicating that for FCSs with an accuracy grade of 2\%, the discriminative accuracy exceeds 95\%. The MPC provides a viable approach for the online monitoring of EEM performance for FCSs, laying a foundation for a fair and just electricity trading market.

eess.SP↗

arXiv2024

Updates on the Tsinghua Tabletop Kibble Balance

With the adoption of the revised International System of Units (SI), the Kibble balance has become a pivotal instrument for mass calibrations against the Planck constant, $h$. One of the major focuses in the Kibble balance community is prioritizing experiments that achieve both high accuracy and compactness. The Tsinghua tabletop Kibble balance experiment seeks to develop a compact, high-precision, user-friendly, cost-effective, and open-hardware apparatus for mass realization, specifically within the kilogram range. This paper reports on the progress of the Tsinghua tabletop Kibble balance project over the past two years. Various aspects of the Tsinghua tabletop system, including electrical, magnetic, mechanical, and optical components, are summarized. Key achievements, such as the construction and characterization of the magnet system, determination of absolute gravitational acceleration, investigation of a capacitor-sensor-based weighing unit, and development of a high-precision current source, are presented to provide a comprehensive understanding of the experiment's status.

physics.ins-det↗

arXiv2024

A Compact Magnet System for the Tsinghua Tabletop Kibble Balance

Although the so-called magnetic geometrical factor, $Bl$, of a Kibble balance does not appear in the Kibble equations, it offers the precision link between electrical and mechanical quantities and furthers a quasi-quantum traceability path for mass metrology. This feature makes the magnet system, supplying the $Bl$ in Kibble equations, play a core role in Kibble balances. Following the open-hardware idea, we report here on the design, manufacture, assembly, optimization, and finally performance of a compact magnet system for the Tsinghua tabletop Kibble balance. Notably, the magnet system showcased in this study facilitates a straightforward upper levitation of splitting through a streamlined mechanism guide, substantially enhancing the ease of open and close operations. Experimental tests show the realized magnet systems can yield a high $Bl$ value (e.g., 400 Tm for a bifilar coil and 800 Tm for a single coil with a wire gauge of 0.2 mm) meanwhile a low volume/weight (40 kg) thanks to the uniformity improvement of magnetic profiles. Furthermore, important parameters related to systematic effects, such as the current effect, are checked, aiming for a final mass-realization accuracy at the $10^{-8}$ level.

physics.ins-det↗

arXiv2024

A Bi-polar Current Source with High Short-term Stability for Tsinghua Tabletop Kibble Balance

A high-precision current source, capable of supporting weighing measurements with a relative uncertainty at the $10^{-9}$ level, is essential for Kibble balance experiments. However, most current sources utilized in Kibble balances to date are homemade and not commercially available. In this paper, we introduce a digital-feedback, two-stage current source designed for the Tsinghua tabletop Kibble balance, relying solely on commercially available sources and voltmeters. A high-resolution, small-range current source is employed to digitally compensate for current output fluctuations from a large-range current source. Experimental tests show the proposal can offer an easy realization of a current source with nA/A stability to support Kibble balance measurements.

physics.ins-det↗

arXiv2024

IMC 2024 Methods & Solutions Review

For the past three years, Kaggle has been hosting the Image Matching Challenge, which focuses on solving a 3D image reconstruction problem using a collection of 2D images. Each year, this competition fosters the development of innovative and effective methodologies by its participants. In this paper, we introduce an advanced ensemble technique that we developed, achieving a score of 0.153449 on the private leaderboard and securing the 160th position out of over 1,000 participants. Additionally, we conduct a comprehensive review of existing methods and techniques employed by top-performing teams in the competition. Our solution, alongside the insights gathered from other leading approaches, contributes to the ongoing advancement in the field of 3D image reconstruction. This research provides valuable knowledge for future participants and researchers aiming to excel in similar image matching and reconstruction challenges.

cs.CV↗

arXiv2024

A Determination of the Local Gravitational Acceleration for the Tsinghua Tabletop Kibble Balance

The Kibble balance requires a measurement of the local gravitational acceleration, $g$, with a typical relative measurement uncertainty of $10^{-9}$. In this paper, the determination of $g$ for the Tsinghua tabletop Kibble balance is presented. A polynomial fitting method is proposed for blind transfers of the absolute gravitational acceleration using relative gravimeters, showing agreement with the value obtained by the tide correction within a few parts in $10^{9}$. Horizontal and vertical gravity gradients are extracted by mapping the gravity distribution at different heights. The self-attraction effect of major components in the experiment, as well as some time-varying systematic effects, are modeled. The final determination of the gravitational acceleration at the mass position, with an uncertainty of 5.4 $\mu$Gal ($k=2$), is achieved for the Tsinghua tabletop Kibble balance experiment.

physics.ins-det↗

arXiv2024

A Self-Healing Magnetic-Array-Type Current Sensor with Data-Driven Identification of Abnormal Magnetic Measurement Units

Magnetic-array-type current sensors have garnered increasing popularity owing to their notable advantages, including broadband functionality, a large dynamic range, cost-effectiveness, and compact dimensions. However, the susceptibility of the measurement error of one or more magnetic measurement units (MMUs) within the current sensor to drift significantly from the nominal value due to environmental factors poses a potential threat to the measurement accuracy of the current sensor. In light of the need to ensure sustained measurement accuracy over the long term, this paper proposes an innovative self-healing approach rooted in cyber-physics correlation. This approach aims to identify MMUs exhibiting abnormal measurement errors, allowing for the exclusive utilization of the remaining unaffected MMUs in the current measurement process. To achieve this, principal component analysis (PCA) is employed to discern the primary component, arising from fluctuations of the measured current, from the residual component, attributed to the drift in measurement error. This analysis is conducted by scrutinizing the measured data obtained from the MMUs. Subsequently, the squared prediction error (SPE) statistic (also called $Q$ statistic) is deployed to individually identify any MMU displaying abnormal behavior. The experimental results demonstrate the successful online identification of abnormal MMUs without the need for a standard magnetic field sensor. By eliminating the contributions from the identified abnormal MMUs, the accuracy of the current measurement is effectively preserved.

eess.SP↗

arXiv2023

Design of the Tsinghua Tabletop Kibble Balance

The Kibble balance is a precision instrument for realizing the mass unit, the kilogram, in the new international system of units (SI). In recent years, an important trend for Kibble balance experiments is to go tabletop, in which the instrument's size is notably reduced while retaining a measurement accuracy of $10^{-8}$. In this paper, we report a new design of a tabletop Kibble balance to be built at Tsinghua University. The Tsinghua Kibble balance aims to deliver a compact instrument for robust mass calibrations from 10 g to 1 kg with a targeted measurement accuracy of 50 $μ$g or less. Some major features of the Tsinghua Kibble balance system, including the design of a new magnet, one-mode measurement scheme, the spring-compensated magnet moving mechanism, and magnetic shielding considerations, are discussed.

physics.ins-det↗

arXiv2022

A SVD-based Dynamic Harmonic Phasor Estimator with Improved Suppression of Out-of-Band Interference

The diffusion of nonlinear loads and power electronic devices in power systems deteriorates the signal environment and increases the difficulty of measuring harmonic phasors. Considering accurate harmonic phasor information is necessary to deal with harmonic-related issues, this paper focuses on realizing accurate dynamic harmonic phasor estimation when the signal is contaminated by certain interharmonic tones, i.e. the out-of-band interference (OBI). Specifically, this work introduces the singular value decomposition into the Taylor-Fourier transform algorithm, deriving a general decomposition form for harmonic phasor filters, and yielding a set of adjustable parameters. Then these parameters are configured to minimize the negative influence of OBI on the dynamic harmonic phasor filters. Based on the recommended parameter values, the optimized harmonic estimator is obtained, and then tested under signals distorted by OBI, harmonic, noise, and in worse cases, frequency deviation, and some dynamic conditions. Test results show the proposal achieves good harmonic phasor estimation even under multiple interferences and dynamic scenarios, and has a much weaker dependence on OBI tones compared to conventional approaches.

eess.SP↗