arXiv subjects

Soon Hock Ng

Publications and source records attributed to Soon Hock Ng.

14 recordsLinked to original sources

arXiv2026

Olivine annealed up to 1500 C: changes traced by polarised IR reflectance and magnetization

Spectral analysis at the infrared (IR) spectral range is introduced with assignment of synthetic red-green-blue (RGB) colours defined by adjustable wavelength and bandwidth. The RGB bands were selected at the phase-specific absorbance A or reflectance R bands of olivine and related materials, which can be formed via high temperature annealing (HTA) of natural minerals up to 1500 C. Natural olivines were collected from quarry at volcanic site in Mortlake, Victoria, Australia and spectrally characterised during IR-THz spectroscopy beamtime experiments at Australian Synchrotron. Phase changes in HTA natural olivines were traced by correlation of optical IR 4-polarisation spectroscopy, X-ray energy dispersive spectroscopy and magnetisation. After HTA, olivine samples were magnetized via precipitation of Fe-rich oxides.

physics.geo-ph↗

arXiv2026

High Entropy Alloy under Shock Compression: Optical-Pump X-Ray-Probe

High entropy alloys (HEAs) are multi-principal-element alloys designed for tailorable mechanical performance and have been attracting significant engineering interest, yet their fundamental behaviour under extreme dynamic conditions, such as shock loading, remains unexplored. Here, we report laser-shock experiments on two different types of 1-micrometers-thick HEA microfilms, CuPdAgPtAu and CrFeCoNiCuMo, on 25-micrometers-thick black-Kapton ablator driven by a high intensity laser pulse (532 nm, 5 ns, 16 J, 0.5-mm diameter focal spot) and probed by an X-ray free electron laser (XFEL) pulse (12 keV, 7 fs). Time-resolved X-ray diffraction (XRD) shows the formation of a transient phase with a lattice compression up to 5.1% of the CuPdAgPtAu HEA along the (111) plane; this transient compressed phase existed for 0.3 ns. The impedance matching Hugoniot analysis estimated a shock pressure of 55 +/- 6 GPa in the HEA film, while Au- and Fe-based equations of state (EoS) modelling predict 80 GPa (0.8 MBar) at the free HEA surface. The free HEA surface reached maximum velocities of ~ 5 km/s as recorded from in situ monitoring with the velocity interferometry system for any reflector (VISAR) imaging. These initial HEA results show the suitability of HEA sample preparation and XFEL-based XRD characterisation under extreme shock loading, and are promising for experimental determination of the EoS of this emerging class of materials (beamtime proposal No.: 2024A8503 for a 6-hour preliminary experiment).

cond-mat.mtrl-sci↗

arXiv2025

Ablation of black-Si by (Gauss-)Bessel femtosecond laser beams

Laser machining and modification of black-Si (b-Si) by femtosecond laser Gaussian (G-) and Gauss-Bessel (GB-) beams are compared at a wavelength of 1030 nm. The GB-beam was generated using a diffractive axicon lens and 10x demagnification optics. It was found that modification of b-Si well below (a factor 50x) the single pulse ablation fluence of 0.2 J/cm2 was possible, corresponding to ablation/melting of nano-needles. The width of modification was almost independent of pulse energy/fluence and had a width of 1/e2-intensity profile at the melting regime. For the GB-beam, the smallest width of laser modification at 0.2 J/cm2 threshold (at the center core) was close to the FWHM of the core of the GB-beam. The aspect ratio of the ablated groove on the surface of b-Si made by GB-beam was twice as large - up to 8 - compared to that achievable with G-beam, and it was at a lower fluence of 4 J/cm2 (50x reduction). Reflectivity of two-side nanotextured b-Si on plasma-thinned 70-micrometers thick Si was strongly reduced in the near-IR range, reaching transmittance >95% at 1.7-2.1 micrometres wavelengths.

physics.optics↗

arXiv2025

Anisotropy analysis of bamboo and tooth using 4-angle polarization micro-spectroscopy

To investigate the anisotropic properties of biomaterials, two distinct classes are considered: polymer-based (e.g., cellulose in plants) and crystalline-based (e.g., enamel in teeth), each demonstrating distinct structural and functional characteristics. Four-angle polarization (4-pol.) spectral mapping of sub-1 μm bamboo slices was carried out in the mid-IR spectral range (2.5-20 μm) to reveal the 3D organization of the chemical bonding of cellulose using the key characteristic absorption bands associated with C-O-C and C-N vibrational modes. The longitudinal and transverse microtome slices revealed a switch between the presence and absence of dichroism in parenchyma cell walls and vascular bundles. The cell wall showed continuous alignment of the C-O-C stretching vibrational mode (8.6 μm/1163 cm-1) down to the pixel resolution of ~ 4 μm (the step size in imaging) in the transverse slice; the cell wall thickness is ~ 1 μm. Thin microtomed slices of a tooth were measured in transmission and reflection modes. The single-point reflection measurements, performed using two perpendicular orientations, revealed orientational anisotropy in the enamel, which was absent in the dentin region. High sub-diffraction limited lateral resolution was numerically validated using a simplified-model of a Gaussian beam reading out material pixels with a defined orientation of absorption. It is shown that the orientation of small ~ λ/10 ~ 1 μm objects can be revealed using a focal spot of ~ λ/NA ~ 20 μm, defining the diffraction limit for the objective lens with a numerical aperture NA ~ 0.5.

physics.bio-ph↗

arXiv2025

Bridging Spectroscopy and Advanced Molecular Orientation Analysis with New 4+ Angle Polarization Toolbox in Quasar

Anisotropy plays a critical role in governing the mechanical, thermal, electrical, magnetic, and optical properties of materials, influencing their behavior across diverse applications. Probing and quantifying this directional dependence is crucial for advancing materials science and biomedical research, as it provides a deeper understanding of structural orientations at the molecular level, encompassing both scientific and industrial benefits. This study introduces the "4+ Angle Polarization" widget, an innovative extension to the open-source Quasar platform (https://quasar.codes/), tailored for advanced multiple-angle polarization analysis. This toolbox enables precise molecular orientation analysis of complex microspectroscopic datasets through a streamlined workflow. Using polarized Fourier transform infrared (p-FTIR) spectroscopy, we demonstrate its versatility across various sample types, including polylactic acid (PLA) organic crystals, murine cortical bone, and human osteons. By overcoming the limitations of traditional two-angle methods, the widget significantly enhances the accuracy of structural and orientational analysis. This novel analytical tool expands the potential of multiple-angle p-FTIR techniques into advanced characterization of structural anisotropy in heterogeneous systems, providing transformative insights for materials characterization, biomedical imaging and beyond.

cond-mat.mtrl-sci↗

arXiv2024

3D Free-Form Optical Lens -- Miniaturised Fibre Couplers for Astrophotonics

In astronomy, multi-object spectrographs employ fibre positioning robots to couple the light from multiple astronomy sources (stars or galaxies) into multiple multi-mode fibres, which are distributed across the focal plane of the telescope. These fibres transport the celestial light to the entrance slit of a spectrograph (or bank of spectrographs) for analysis. For any multi-object system mm-scale opto-mechanical solutions are required to couple the telescope light efficiently into the fibre. We demonstrate a unique micro-optics solution to replace current optical fibre couplers. Specifically, we target technology on board the Keck telescope's FOBOS - Fibre-Optic Broadband Optical Spectrograph - which operates at UV to IR spectral ranges. For spectrally broad UV-IR band operation we use glass and crystals: fused silica, crystalline quartz (transparency 0.16 - 2 micrometers), sapphire Al2O3 (0.2 - 5 micrometers), CaF2 (0.2-7 micrometers), and BaF2 (0.2-10 micrometers). The miniaturised micro-coupler is monolithic, with the entire light path contained within glass or crystal, seamlessly extending to the fibre entrance, which is laser-machined and precisely aligned with the optical axis.

astro-ph.IM↗

arXiv2024

Bessel-beam direct-write of the etch-mask in a nano-film of alumina for high-efficiency Si solar cells

Large surface area applications such as high-efficiency > 26% solar cells require surface patterning with 1-10 micrometers periodic patterns at high fidelity over 1-10 cm^2 areas (before up scaling to 1 m^2) to perform at, or exceed, the Lambertian (ray optics) limit of light trapping. Here we show a pathway to high-resolution sub-1 micrometer etch mask patterning by ablation using direct femtosecond laser writing performed at room conditions (without the need for a vacuum-based lithography approach). A Bessel beam was used to alleviate the required high surface tracking tolerance for ablation of 0.3-0.8 micrometer diameter holes in ~40 nm alumina Al2O3-mask at high writing speed, 7.5 cm/s; a patterning rate 1 cm^2 per 20 min. The plasma etching protocol was optimised for a zero-mesa formation of photonic crystal (PhC) trapping structures and smooth surfaces at the nanoscale level. Scaling up in area and throughput of the demonstrated approach is outlined.

physics.optics↗

arXiv2023

Determination of Stokes vector from a single image acquisition

Four Stokes parameters (1852) define the polarisation state of light. Measured changes of the Stokes vector of light traversing an inhomogeneous sample are linked to the local anisotropies of absorption and refraction and are harnessed over an increasing range of applications in photonics, material, and space/earth observation. Several independent polarisation sensitive measurements are usually required for determination of the all four Stokes parameters, which makes such characterisation procedure time-consuming or requires complex setups. Here we introduce a single-snapshot approach to Stokes polarimetry in transmission by use of a 4-polarisation camera with the on-chip integrated polarisers. A quarter-waveplate was added in front of the sample and was illuminated by a linearly polarised light. This approach is demonstrated by measuring birefringence $Δn\sim 0.012$ of spider silk of only $\sim 6~μ$m-diameter using microscopy, however, due to its generic nature, it is transferable to other spectral ranges and imaging applications, e.g., imaging from a fast moving satellite or drone or monitoring fast changing events such as phase transitions.

physics.optics↗

arXiv2021

Beyond Lambertian light trapping for large-area silicon solar cells: fabrication methods

Light trapping photonic crystal (PhC) patterns on the surface of Si solar cells provides a novel opportunity to approach the theoretical efficiency limit of 32.3%, for light-to-electrical power conversion with a single junction cell. This is beyond the efficiency limit implied by the Lambertian limit of ray trapping 29%. The interference and slow light effects are harnessed for collecting light even at the long wavelengths near the Si band-gap. We compare two different methods for surface patterning, that can be extended to large area surface patterning: 1) laser direct write and 2) step-&-repeat 5-times reduction projection lithography. Large area throughput limitations of these methods are compared with the established electron beam lithography (EBL) route, which is conventionally utilised but much slower than the presented methods. Spectral characterisation of the PhC light trapping is compared for samples fabricated by different methods. Reflectance of Si etched via laser patterned mask was 7% at visible wavelengths and was comparable with Si patterned via EBL made mask. The later pattern showed a stronger absorbance than the Lambertian limit (M.-L. Hsieh et al., Sci. Rep. 10, 11857 (2020)).

physics.optics↗

arXiv2021

Imaging with Diffractive Axicons Rapidly Milled on Sapphire by Femtosecond Laser Ablation

Fabrication of large area (sub 1 cm cross-section) micro-optical components in a short period of time (approximately 10 min) and with lesser number of processing steps is highly desirable and cost-effective. In the recent years, femtosecond laser fabrication technology has revolutionized the field of manufacturing by offering the above capabilities. In this study, a fundamental diffractive optical element, binary axicon i.e axicon with two phase or amplitude levels, has been designed in three configurations namely conventional axicon, photon sieve axicon (PSA) and sparse PSA and directly milled onto the Sapphire substrate. The fabrication results revealed that a single pulse burst fabrication can produce a flat and smooth profile than pulse overlapped fabrication which gives rise to surface damage and increased roughness. The fabricated elements were processed in IsoPropyl Alcohol and Potassium Hydroxide to remove debris and redeposited amorphous Sapphire. An incoherent illumination was used for optical testing of the components and a non-linear optical filter was used for cleaning the noisy images generated by the diffractive optical elements.

physics.optics↗

arXiv2020

Tilted black-Si: ~0.45 form-birefringence from sub-wavelength needles

The self-organised conical needles produced by plasma etching of silicon (Si), known as black silicon (b-Si), create a form-birefringent surface texture when etching of Si orientated at angles of $θ_i < 50 - 70^\circ$ (angle between the Si surface and vertical plasma E-field). The height of the needles in the form-birefringent region following 15~min etching was $d\sim 200$ nm and had a 100 $μ$m width of the optical retardance/birefringence, characterised using polariscopy. The height of the b-Si needles corresponds closely to the skin-depth of Si $\simλ/4$ for the visible spectral range. Reflection-type polariscope with a voltage-controlled liquid-crystal retarder is proposed to directly measure the retardance $Δn\times d/λ\approx 0.15$ of the region with tilted b-Si needles. The quantified form birefringence of $Δn = - 0.45$ over $λ= 400-700$~nm spectral window was obtained. Such high values of $Δn$ at visible wavelengths can only be observed in the most birefringence calcite or barium borate as well as in liquid crystals. The replication of b-Si into Ni-shim with high fidelity was also demonstrated and can be used for imprinting of the b-Si nanopattern into other materials.

physics.app-ph↗

arXiv2020

Giant enhancement of THz wave emission underdouble pulse excitation of thin water flow

Simultaneous measurements of THz wave and hard X-ray emission from thin and flat water flow when irradiated by double femtosecond laser pulses (800 nm, 35 fs, transform-limited, 0.5 kHz, delay times up to 15 ns) were carried out at the transmission and the reflection sides of the flow with THz time-domain spectroscopy and Geiger counters. THz wave emission spectra show their dynamic peak-shifts toward the low frequency with the highest intensity enhancements more than 1.5 x 10^3 times in |E|^2 at the delay time of 4.7 ns between the two pulses, while X-ray intensity enhancements are limited to about 20 times at 0 ns under the same experimental conditions. The mechanisms for the spectral changes and the intensity enhancements in THz wave emission are discussed from the viewpoint of laser ablation on the water flow induced by the pre-pulse irradiation.

physics.app-ph↗

arXiv2019

Fresnel incoherent correlation holography with single camera shot

Fresnel incoherent correlation holography (FINCH) is a self-interference based super-resolution three-dimensional imaging technique. FINCH in inline configuration requires an active phase modulator and at least three camera shots to reconstruct objects without the twin image and bias terms. In this study, FINCH is realized using a randomly multiplexed bifocal binary Fresnel zone lenses fabricated using electron beam lithography. A modified hologram reconstruction mechanism is presented which introduces the single shot capability in FINCH. A point spread hologram library was recorded using a point object located at different axial locations and an object hologram was recorded. The image of the object at different planes were reconstructed using decorrelation of the object hologram by the point spread hologram library. Application potential including bio-medical optics is discussed.

physics.optics↗

arXiv2018

All-dielectric metasurface for wavefront control at terahertz frequencies

Recently, metasurfaces have gained popularity due to their ability to offer a spatially varying phase response, low intrinsic losses and high transmittance. Here, we demonstrate numerically and experimentally a silicon metasurface at THz frequencies that converts a Gaussian beam into a Vortex beam independent of the polarization of the incident beam. The metasurface consists of an array of sub-wavelength silicon cross resonators made of a high refractive index material on substrates such as sapphire and CaF$_2$ that are transparent at IR-THz spectral range. With these substrates, it is possible to create phase elements for a specific spectral range including at the molecular finger printing around 10$~μ$m as well as at longer THz wavelengths where secondary molecular structures can be revealed. This device offers high transmittance and a phase coverage of 0 to $2π$. The transmittance phase is tuned by varying the dimensions of the meta-atoms. To demonstrate wavefront engineering, we used a discretized spiraling phase profile to convert the incident Gaussian beam to vortex beam. To realize this, we divided the metasurface surface into eight angular sectors and chose eight different dimensions for the crosses providing successive phase shifts spaced by $π/4$ radians for each of these sectors. Photolithography and reactive ion etching (RIE) were used to fabricate these silicon crosses as the dimensions of these cylinders range up to few hundreds of micrometers. Large 1-cm-diameter optical elements were successfully fabricated and characterised by optical profilometry.

physics.optics↗