arXiv subjects

Sophia H. Xue

Publications and source records attributed to Sophia H. Xue.

6 recordsLinked to original sources

arXiv2026

Co-Designing Error Mitigation and Error Detection for Logical Qubits

Near-term quantum workloads demand error management, yet the two lightest-weight techniques, Quantum Error Detection (QED) and Probabilistic Error Cancellation (PEC), have complementary cost profiles whose joint architectural design space remains unexplored. QED encodes logical qubits and discards error-flagged runs, filtering noise with low qubit overhead but leaving residual errors; PEC can correct these in software, but at exponential cost in noise strength. If QED efficiently reduces per-gate noise, PEC's cost savings can outweigh QED's discard overhead; realizing this, however, requires solving two system-level design challenges. First, the \textit{QED interval} -- how often detection cycles are inserted -- is a tunable architectural parameter governing the cost-accuracy tradeoff. We derive an efficiency condition and show that the canonical one-cycle-per-gate frequency does not achieve break-even in any code we evaluate, while optimized intervals on high-rate Iceberg codes do. Second, we discover that naive PEC+QED integration \textit{degrades} accuracy below the QED-only baseline. The root cause is a transient error profile in the first detection cycle that corrupts PEC's noise model. We develop \textit{steady-state extraction}, a co-designed characterization protocol that isolates steady-state error behavior, reducing estimation bias by up to $10.2\times$. On a $[[6,4,2]]$ Iceberg code running QAOA ($p{=}4$--$8$) with a fixed shot budget, PEC+QED achieves $2$--$11\times$ lower absolute error and up to $31\times$ lower MSE versus PEC on physical qubits, with per-interval savings compounding over interval depth.

quant-ph↗

arXiv2026

Efficient Routing of Quantum LDPC Codes on Programmable 2D Toric Architectures

Quantum low-density parity-check codes are promising candidates towards scalable fault-tolerant quantum computation. Among these, bivariate bicycle (BB) codes offer superior encoding rates and large code distance compared to surface codes. However, their requirement on long-range stabilizer measurements poses significant challenges for implementation on realistic hardware with limited connectivity, such as superconducting circuit platforms. In this work, we introduce a novel hardware-software co-design that leverages a programmable communication network architecture to address these limitations. Our approach utilizes a 2D toric network of oscillators as a flexible communication fabric linking qubits at each site. Such architecture significantly reduces the number of long-range couplers required from $O(n)$ to $O(\sqrt{n})$. Dual-rail qubits, along with native gates including Swap-Wait-Swap gates and beamsplitter SWAPs, ensure that long-range two-qubit gates can be executed with high fidelity and low latency. To further enhance performance, our qubit layout and routing algorithm utilize symmetries of the codes and enable maximum parallelism for long-range two-qubit gates, maintaining a low syndrome extraction cycle duration and scalability over the code length. We perform circuit-level simulation with realistic noise modeling based on experimental hardware parameters, observing an logical error rate per logical qubit per cycle of 3.06\% for $[[18, 4, 4]]$ BB code, 2.6$\times$ less than the existing experimental result. These findings provide a practical roadmap and identify key technological advancements needed to achieve low-overhead fault-tolerant quantum computing at scale.

quant-ph↗

arXiv2024

A mid-circuit erasure check on a dual-rail cavity qubit using the joint-photon number-splitting regime of circuit QED

Quantum control of a linear oscillator using a static dispersive coupling to a nonlinear ancilla underpins a wide variety of experiments in circuit QED. Extending this control to more than one oscillator while minimizing the required connectivity to the ancilla would enable hardware-efficient multi-mode entanglement and measurements. We show that the spectrum of an ancilla statically coupled to a single mode can be made to depend on the joint photon number in two modes by applying a strong parametric beamsplitter coupling between them. This `joint-photon number-splitting' regime extends single-oscillator techniques to two-oscillator control, which we use to realize a hardware-efficient erasure check for a dual-rail qubit encoded in two superconducting cavities. By leveraging the beamsplitter coupling already required for single-qubit gates, this scheme permits minimal connectivity between circuit elements. Furthermore, the flexibility to choose the pulse shape allows us to limit the susceptibility to different error channels. We use this scheme to detect leakage errors with a missed erasure fraction of $(9.0 \pm 0.5)\times10^{-4}$, while incurring an erasure rate of $2.92 \pm 0.01\%$ and a Pauli error rate of $0.31 \pm 0.01\%$, both of which are dominated by cavity errors.

quant-ph↗

arXiv2023

Dual-rail encoding with superconducting cavities

The design of quantum hardware that reduces and mitigates errors is essential for practical quantum error correction (QEC) and useful quantum computation. To this end, we introduce the circuit-Quantum Electrodynamics (QED) dual-rail qubit in which our physical qubit is encoded in the single-photon subspace of two superconducting microwave cavities. The dominant photon loss errors can be detected and converted into erasure errors, which are in general much easier to correct. In contrast to linear optics, a circuit-QED implementation of the dual-rail code offers unique capabilities. Using just one additional transmon ancilla per dual-rail qubit, we describe how to perform a gate-based set of universal operations that includes state preparation, logical readout, and parametrizable single and two-qubit gates. Moreover, first-order hardware errors in the cavities and the transmon can be detected and converted to erasure errors in all operations, leaving background Pauli errors that are orders of magnitude smaller. Hence, the dual-rail cavity qubit exhibits a favorable hierarchy of error rates and is expected to perform well below the relevant QEC thresholds with today's coherence times.

quant-ph↗

arXiv2023

Demonstrating a superconducting dual-rail cavity qubit with erasure-detected logical measurements

A critical challenge in developing scalable error-corrected quantum systems is the accumulation of errors while performing operations and measurements. One promising approach is to design a system where errors can be detected and converted into erasures. Such a system utilizing erasure qubits are known to have relaxed requirements for quantum error correction. A recent proposal aims to do this using a dual-rail encoding with superconducting cavities. However, experimental characterization and demonstration of a dual-rail cavity qubit has not yet been realized. In this work, we implement such a dual-rail cavity qubit; we demonstrate a projective logical measurement with integrated erasure detection and use it to measure dual-rail qubit idling errors. We measure logical state preparation and measurement errors at the $0.01\%$-level and detect over $99\%$ of cavity decay events as erasures. We use the precision of this new measurement protocol to distinguish different types of errors in this system, finding that while decay errors occur with probability $\sim 0.2\%$ per microsecond, phase errors occur 6 times less frequently and bit flips occur at least 140 times less frequently. These findings represent the first confirmation of the expected error hierarchy necessary to concatenate dual-rail erasure qubits into a highly efficient erasure code.

quant-ph↗

arXiv2023

A high on-off ratio beamsplitter interaction for gates on bosonically encoded qubits

Encoding a qubit in a high quality superconducting microwave cavity offers the opportunity to perform the first layer of error correction in a single device, but presents a challenge: how can quantum oscillators be controlled while introducing a minimal number of additional error channels? We focus on the two-qubit portion of this control problem by using a 3-wave mixing coupling element to engineer a programmable beamsplitter interaction between two bosonic modes separated by more than an octave in frequency, without introducing major additional sources of decoherence. Combining this with single-oscillator control provided by a dispersively coupled transmon provides a framework for quantum control of multiple encoded qubits. The beamsplitter interaction $g_\text{bs}$ is fast relative to the timescale of oscillator decoherence, enabling over $10^3$ beamsplitter operations per coherence time, and approaching the typical rate of the dispersive coupling $χ$ used for individual oscillator control. Further, the programmable coupling is engineered without adding unwanted interactions between the oscillators, as evidenced by the high on-off ratio of the operations, which can exceed $10^5$. We then introduce a new protocol to realize a hybrid controlled-SWAP operation in the regime $g_{bs}\approxχ$, in which a transmon provides the control bit for the SWAP of two bosonic modes. Finally, we use this gate in a SWAP test to project a pair of bosonic qubits into a Bell state with measurement-corrected fidelity of $95.5\% \pm 0.2\%$.

quant-ph↗