arXiv subjects

Soumya Biswas

Publications and source records attributed to Soumya Biswas.

6 recordsLinked to original sources

arXiv2024

Predicting the Realizable Maximum Power Factor using the Jonker and Ioffe formulation: Al-doped ZnO Triangular Microcrystals with Graphite Inclusion Case Study

Among the popular TE materials, selenides and tellurides are the benchmarks of high-efficiency systems. However, for the high-temperature application (>700 K), it is required to rely on the silicides and the oxides due to their exceptional thermal stability. ZnO is among the first few oxides in the field of thermoelectricity. Al-doped ZnO is a proven material for its high-temperature thermoelectric applications. However, the high grain boundary resistance limits further improvement of the efficiency of this oxide. Band-engineering, band-modification is a successful approach in lowering the grain boundary resistance. The addition of graphite and graphite-based materials at the grain boundaries is shown to serve this purpose. In this work, graphite powder is added in varying proportions to Al-doped ZnO triangular microcrystals. Thus, prepared materials are characterized to confirm the formation and investigate the nature of interface, morphology, etc. TE parameters such as electrical conductivity, Seebeck coefficient, and thermal conductivity of those materials also have been measured. The theoretical calculation of TE efficiency zT often differs from the actual experimental results due to the wide range of preparation methods, leading to changes in porosity, the nature and density defects, and several other factors. In this paper, an effort has been made to estimate the maximum achievable power factor (PFmax) from the measured TE parameters of this set of samples by the Jonker and Ioffe analysis. Based on the predicted PFmax, an appropriate material composition has been identified to achieve that same. Subsequently, including the measured parameters the TE efficiency (zT) is calculated. Further, a sudden dip observed in the thermal conductivity at the high-temperature range (625 K - 1000 K) of the prepared undoped ZnO graphite composite is investigated in this paper.

cond-mat.mtrl-sci↗

arXiv2024

Coexistence of Multiple Magnetic Interactions in Oxygen Deficient V2O5 Nanoparticles

This paper reports on the spin glass-like coexistence of competing magnetic orders in oxygen-deficient V2O5 nanoparticles having a broad size distribution. X-ray photoelectron spectroscopy yields the surface chemical stoichiometry of nearly V2O4.65 due to significant defect density. Temperature-dependent electrical conductivity and thermopower measurements demonstrate a polaronic conduction mechanism with a hopping energy of about 0.112 eV. The V2O5-δ sample exhibits strong field as well as temperature-dependent magnetic behaviour when measured with a SQUID magnetometer, showing positive magnetic susceptibility across the temperature range of 2-350 K. Field-cooled and zero-field-cooled data indicate hysteresis, suggesting glassy behaviour. The formation of small polarons due to oxygen vacancy defects, compensated by V4+ charge defects, results in Magneto-Electronic Phase Separation (MEPS) and various magnetic exchanges, as predicted by first-principle calculations. This is evidenced by the strong hybridisation of V orbitals in the vicinity of vacant oxygen site. An increase in V4+ defects shows an antiferromagnetic (AFM) component. The magnetic diversity in undoped V2O4.9 originates from defect density and their random distribution, leading to MEPS. This involves localised spins in polarons and ferromagnetic (FM) clusters on a paramagnetic (PM) background, while V4+ dimers induce AFM interactions. Electron paramagnetic resonance spectra measured at different temperatures indicate a dominant paramagnetic signal at a g-value of 1.97 due to oxygen defects, with a broad FM resonance-like hump. Both signals diminish with increasing temperature. Neutron diffraction data rules out long-range magnetic ordering, reflecting the composition as V2O4.886. Despite the FM hysteresis, no long-range order is observed in ND data, consistent with the polaron cluster-like FM with MEPS nature.

cond-mat.mtrl-sci↗

arXiv2022

CVD Growth of Tin Selenide Thin Films for Optoelectronic Applications

Tin Selenide (SnSe) thin films were grown onto glass and alumina substrates by Chemical Vapor Deposition (CVD) method. The structural, micro-structural and morphological characterizations of the as grown thin films were investigated using XRD, SEM and Raman spectroscopy which reveals that the films on glass are phase pure oriented SnSe while those on Alumina are polycrystalline SnSe with SnSe2 impurity phase. The optical properties of the films grown onto glass substrate were studied by UV-vis spectroscopy. The optical band gap calculated is 1 to 1.3 eV for indirect and direct transition in film deposited on glass substrates. The Arrhenius plots of the two films show very different thermal activations i.e. 0.088 eV for tin vacancy acceptor level close to valance band maxima in pure SnSe and 0.44 eV for mid gap selenium vacancies of SnSe2. Photoresponse was observed by illuminating the sample (Glass and alumina Substrate) using white and UV light (400 nm) for a fixed time pulses. The deposited onto Alumina substrate were found to show better photoresponse due to SnSe/SnSe2 p-n heterojunctions.

cond-mat.mtrl-sci↗

arXiv2021

Selective Enhancement in Phonon Scattering leads to High Thermoelectric Figure of Merit in ZnO -- Graphene Oxide Core-shell Nanohybrids

ZnO is a promising candidate as an environment friendly thermoelectric (TE) material. However, the poor TE figure of merit (zT) needs to be addressed to achieve significant TE efficiency for commercial applications. Here we demonstrate that selective enhancement in phonon scattering leads to increase in zT of RGO encapsulated Al-doped ZnO core shell nanohybrids, synthesized via a facile and scalable method. The incorporation of 1 at% Al with 1.5 wt% RGO into ZnO (AGZO) has been found to show significant enhancement in zT (=0.52 at 1100 K) which is an order of magnitude larger compared to that of bare undoped ZnO. Photoluminescence and X-ray photoelectron spectroscopy measurements confirm that RGO encapsulation significantly quenches surface oxygen vacancies in ZnO along with nucleation of new interstitial Zn donor states. Tunneling spectroscopy reveals that the band gap of ~ 3.4 eV for bare ZnO reduces effectively to ~ 0.5 eV upon RGO encapsulation, facilitating charge transport. The electrical conductivity enhancement also benefits from the more than 95% densification achieved, using the spark plasma sintering method, which aids reduction of GO into RGO. The same Al doping and RGO capping synergistically brings about drastic reduction of thermal conductivity, through enhanced phonon-phonon and point defect-phonon scatterings. These opposing effects on electrical and thermal conductivities enhances the power factors as well as the zT value. Overall, a practically viable route for synthesis of oxide - RGO TE material which could find its practical applications for the high-temperature TE power generation.

cond-mat.mtrl-sci↗

arXiv2020

Proof-of-concept thermoelectric oxygen sensor exploiting oxygen mobility of GdBaCo2O5+δ

In this paper, we demonstrate a proof-of-concept oxygen sensor based on the thermoelectric principle using polycrystalline $GdBaCo_2O_{5+δ}$ where 0.45<$δ$<0.55 (GDCO). The lattice oxygen in layered double perovskite oxides is highly susceptible to the ambient oxygen partial pressure. The as-synthesized GDCO sample processed in ambient conditions shows pure orthorhombic ($P_{mmm}$ space group) phase and a $δ$-value close to 0.5 as confirmed from X-ray diffraction reitveld refinement. The X-ray photoelectron spectroscopy shows significant $Co^{3+}$ oxidation state in non-octahedral sites in addition to $Co^{3+}$ and $Co^{4+}$ in octahedral sites. The insulator-to-metal transition (MIT) is observed at nearly 340 K as seen in electrical resistivity and seebeck coefficient measurements. The seebeck coefficient shows a large change of about 10-13 $μ$V/K with time constant of ~20 sec, at room temperature (300 K) when the gas ambience changes from 100% oxygen to 100% nitrogen and vice versa, under a constant temperature gradient of 1 K. The response in seebeck is found to be particularly large below MIT. The diffusion of oxygen into the lattice leading to hole doping shows a large change in carrier concentration resulting in a large change in the seebeck coefficient in insulating state. On the other hand, due to insignificant increase in already large carrier concentration in metallic state the change in seebeck is minimal. Nevertheless, below MIT the response is fairly reproducible within stoichiometry $δ$ = 0.5 $\pm$ 0.05. This principle shall be of significant utility to design the oxygen sensors which work at room temperature or even cryogenic temperatures.

cond-mat.mtrl-sci↗

arXiv2019

Simple, Reversible Gradient Seebeck Coefficient Measurement System for 300-600K

An in-house Seebeck coefficient measurement system has been developed which can measure the thermoemf (Seebeck coefficient) of the sample, under large temperature difference, in the temperature range 300-600 K. Unlike majority of reported instrumental designs, the system does not have a hot walled chamber and hence is much closer to real time thermoelectric applications conditions. The system consists of two brass blocks supported heaters. These heaters are placed on either side of the sample through silver caps, thus allows individual temperature control. A reversible temperature gradient is applied across the sample and the measurement is carried out in quasi-static direct current mode. Hence, a more accurate Seebeck coefficient measurement is obtained.

physics.ins-det↗