arXiv subjects

Soumyaranjan Khuntia

Publications and source records attributed to Soumyaranjan Khuntia.

8 recordsLinked to original sources

arXiv2026

Coordinated Coronagraphic Observations from Proba-3 and Aditya-L1: Investigating CME Energetics in the Inner Corona

Constraining the plasma properties and energetics of coronal mass ejections (CMEs) in the inner corona is essential for understanding their early evolution, yet remains challenging because of limited observations. We investigate the mass and density evolution, and energy partitioning of two CMEs observed on 2025 September 14 and 16, and assess the potential of coordinated Proba-3/ASPIICS and Aditya-L1/VELC observations to constrain CME energetics in the low corona. We present the first coordinated observations of CMEs obtained simultaneously by Proba-3/ASPIICS and Aditya-L1/VELC. Using ASPIICS white-light observations, we estimate the CME mass, volume, number density, and the evolution of kinetic, thermal, and magnetic energies. Magnetic energies are estimated from observed CME properties using observationally constrained, physically motivated assumptions. Simultaneous VELC Fe XIV 5303 Angstorm observations provide independent estimates of the emission measure, electron number density, thermal energy, and CME lateral extent. The two events exhibit markedly different energy partitioning in the low corona. For the 14 September CME, the kinetic and magnetic energies are comparable, while the thermal energy remains nearly two orders of magnitude smaller, indicating limited plasma heating. In contrast, the 16 September CME exhibits a substantial thermal-energy enhancement, with thermal energy eventually becoming comparable to kinetic energy. For both CMEs, the estimated magnetic energy remains comparable to or exceeds the kinetic energy over the observed height. Our results demonstrate the scientific potential of synergetic ASPIICS and VELC observations for constraining CME mass, density, and energetics in the inner corona, providing new observational constraints on the early evolution of CMEs.

astro-ph.SR↗

arXiv2026

Comparative 3D Asymmetric Expansion and Angular Widths Evolution of Fast and Slow Coronal Mass Ejections

The radial and lateral dimensions of coronal mass ejections (CMEs) influence their duration and probability of encounter at Earth. These properties are linked to the expansion speed of CMEs in different radial and lateral directions; however, most earlier studies modeled CME evolution using a projected full ice-cream cone geometry, which does not distinguish between radial and lateral expansion. Our study investigates the asymmetric expansion (relative radial and lateral components) and kinematics of seven fast and seven slow CMEs within coronagraphic heights, using the Graduated Cylindrical Shell model. Our study confirms that CMEs expand asymmetrically, with lateral expansion exceeding radial expansion in both CME populations. This asymmetry limits the accuracy of the full ice-cream cone model. For both fast and slow CMEs, higher leading edge speeds are associated with higher expansion speeds. At a height of 10 Rs, slow CMEs with larger expansion speeds (lateral and radial) have larger angular widths (face-on and edge-on), whereas fast CMEs exhibit a negative correlation between lateral expansion speed and face-on angular width. We find that the expansion and propagation speeds of slow CMEs exhibit a two-phase evolution, whereas those of fast CMEs display more diverse trends. Overall, this study suggests that fast and slow CMEs evolve differently and should not be treated as a single population in statistical estimates of their physical parameters. Our study highlights the importance of estimating CME angular widths and expansion speeds along different directions, and beyond standard coronagraphic heights, to capture their complete physical evolution.

astro-ph.SR↗

arXiv2025

Thermal properties of interplanetary coronal mass ejections at 1 AU and their connection to geoeffectiveness across solar cycles 23-25

Interplanetary coronal mass ejections (ICMEs) are major drivers of heliospheric variability and can produce prolonged disturbances near Earth. Understanding their thermodynamic evolution is crucial for assessing their heat budget and exploring how thermal states relate to their plasma dynamics and geoeffectiveness. We conduct a comprehensive statistical analysis of magnetic ejecta (MEs) over Solar Cycles 23, 24, and the ascending phase of 25. Leveraging a polytropic framework, we characterized the thermal state of ME based on the event-wise median proton polytropic index (Gamma_p) from in-situ measurements at 1 AU. We find that MEs are thermodynamically active and rarely evolve adiabatically or isothermally. Notably, a significant fraction (45%) of MEs exhibit a heating state. Heating MEs dominate near solar maxima and exhibit strong solar-cycle modulation in Gamma_p, proton temperature, and expansion speed, indicating active in-transit heating processes. Whereas, Cooling MEs show a nearly constant Gamma_p = 2 across cycles, suggesting enhanced cooling beyond adiabatic expectations and possible thermal energy retention from eruption to 1 AU. Notably, the median Gamma_p value increases from 1.49 (SC23) to 1.88 (SC24), indicating a shift to cooling-dominated states over successive cycles. High-impact ICMEs, predominantly Heating MEs (Gamma_p = 0.59), often manifest as magnetic clouds with enhanced magnetic fields, low plasma beta, pronounced sheath compression, elevated expansion, and post-ICME high-speed flows, making them the most geoeffective drivers of strong geomagnetic storms. These results establish Gamma_p as a useful diagnostic of ICME thermal states, though meaningful assessment of geoeffectiveness requires combined consideration of thermal, plasma, and magnetic field properties.

astro-ph.SR↗

arXiv2025

Thermal and Turbulence Characteristics of Fast and Slow Coronal Mass Ejections at 1 AU

Understanding the thermal and turbulence properties of interplanetary coronal mass ejections (ICMEs) is essential for analyzing their evolution and interactions with the surrounding medium. This study explores these characteristics across different regions of two distinct ICMEs observed at 1 AU, utilizing in-situ measurements from the Wind spacecraft. The polytropic indices, Gamma_e for electrons and Gamma_p for protons) reveal significant deviations from adiabatic expansion, suggesting sustained heating mechanisms within the ICMEs even at 1AU. The effective polytropic index (Gamma_eff) of the magnetic ejecta (ME) in both ICME1 and ICME2 is found to be near-isothermal (Gamma_eff = 0.88 and 0.76), aligning with measurements near the Sun, highlighting consistent heating across heliospheric distances. Spectral analysis at the inertial scale reveals Kolmogorov-like turbulence in the fast ICME1's ME, while the ME of the slower ICME2 exhibits less developed turbulence with a shallower spectral index (alpha_B). The turbulence analysis in the dissipation scale indicates that the ME of slower ICME2 is less affected by the ambient medium than the faster ICME2. The MEs of both ICMEs show magnetic compressibility much smaller than unity (C_B < 1), suggesting dominant Alfvenic fluctuations in the MEs. Notably, the partial variance of increments (PVI) method identifies more intermittent structures, such as current sheets and reconnection sites, in the sheath and post-ICME regions. Higher PVI values correlate with regions of increased electron and proton temperature (for the sheath region), as well as higher C_B values, highlighting their role in local energy dissipation. These results underscore the importance of ongoing heating and turbulence processes in shaping the evolution of ICMEs.

astro-ph.SR↗

arXiv2025

Evolution of interacting coronal mass ejections driving the great geomagnetic storm on 10 May 2024

The arrival of a series of coronal mass ejections (CMEs) at the Earth resulted in a great geomagnetic storm on 10 May 2024, the strongest storm in the last two decades. We investigate the kinematic and thermal evolution of the successive CMEs to understand their interaction en route to Earth. We attempt to find the dynamics, thermodynamics, and magnetic field signatures of CME-CME interactions. Our focus is to compare the thermal state of CMEs near the Sun and in their post-interaction phase at 1 AU. The 3D kinematics of six identified Earth-directed CMEs were determined using the GCS model. The flux rope internal state (FRIS) model is implemented to estimate the CMEs' polytropic index and temperature evolution from their measured kinematics. The thermal states of the interacting CMEs are examined using in-situ at 1 AU. Our study determined the interaction heights of selected CMEs and confirmed their interaction that led to the formation of complex ejecta identified at 1 AU. The plasma, magnetic field, and thermal characteristics of magnetic ejecta (ME) within the complex ejecta and other substructures, such as interaction regions (IRs) within two ME and double flux rope-like structures within a single ME, show the possible signatures of CME-CME interaction in in-situ observations. The FRIS-model-derived thermal states for individual CMEs reveal their diverse thermal evolution near the Sun, with most CMEs transitioning to an isothermal state at 6-9 Rsun, except for CME4, which exhibits an adiabatic state due to a slower expansion rate. The complex ejecta at 1 AU shows a predominant heat-release state in electrons, while the ions show a bimodal distribution of thermal states. On comparing the characteristics of CMEs near the Sun and at 1 AU, we suggest that such one-to-one comparison is difficult due to CME-CME interactions significantly influencing their post-interaction characteristics.

astro-ph.SR↗

arXiv2024

Deciphering the Evolution of Thermodynamic Properties and their Connection to the Global Kinematics of High-Speed Coronal Mass Ejections Using FRIS Model

Most earlier studies have been limited to estimating the kinematic evolution of coronal mass ejections (CMEs), and only limited efforts have been made to investigate their thermodynamic evolution. We focus on the interplay of the thermal properties of CMEs with their observed global kinematics. We implement the Flux rope Internal State (FRIS) model to estimate variations in the polytropic index, heating rate per unit mass, temperature, pressure, and various internal forces. The model incorporates inputs of 3D kinematics obtained from the Graduated Cylindrical Shell (GCS) model. In our study, we chose nine fast-speed CMEs from 2010 to 2012. Our investigation elucidates that the selected fast-speed CMEs show a heat-release phase at the beginning, followed by a heat-absorption phase with a near-isothermal state in their later propagation phase. The thermal state transition, from heat release to heat absorption, occurs at around 3($\pm$0.3) to 7($\pm$0.7) $R_\odot$ for different CMEs. We found that the CMEs with higher expansion speeds experience a less pronounced sharp temperature decrease before gaining a near-isothermal state. The differential emission measurement (DEM) analysis findings, using multi-wavelength observation from SDO/AIA, also show a heat release state of CMEs at lower coronal heights. We also find the dominant internal forces influencing CME radial expansion at varying distances from the Sun. Our study shows the need to characterize the internal thermodynamic properties of CMEs better in both observational and modeling studies, offering insights for refining assumptions of a constant value of the polytropic index during the evolution of CMEs.

astro-ph.SR↗

arXiv2024

Distribution and Recovery Phase of Geomagnetic Storms During Solar Cycles 23 and 24

Coronal mass ejections (CMEs) and Stream Interaction Regions (SIRs) are the main drivers of intense geomagnetic storms. We study the distribution of geomagnetic storms associated with different drivers during solar cycles 23 and 24 (1996-2019). Although the annual occurrence rate of geomagnetic storms in both cycles tracks the sunspot cycle, the second peak in storm activity lags the second sunspot peak. SIRs contribute significantly to the second peak in storm numbers in both cycles, particularly for moderate to stronger-than-moderate storms. We note semiannual peaks in storm numbers much closer to equinoxes for moderate storms, and slightly shifted from equinoxes for intense and stronger-than-intense storms. We note a significant fraction of multiple-peak storms in both cycles due to isolated ICMEs/SIRs, while single-peak storms from multiple interacting drivers, suggesting a complex relationship between storm steps and their drivers. Our study focuses on investigating the recovery phases of geomagnetic storms and examining their dependencies on various storm parameters. Multiple-peak storms in both cycles have recovery phase duration strongly influenced by slow and fast decay phases with no correlation with the main phase buildup rate and Dst peak. However, the recovery phase in single-peak storms for both cycles depends to some extent on the main phase buildup rate and Dst peak, in addition to slow and fast decay phases. Future research should explore recovery phases of single and multiple-peak storms incorporating in-situ solar wind observations for a deeper understanding of storm evolution and decay processes.

astro-ph.SR↗

arXiv2023

Unraveling the Thermodynamic Enigma between Fast and Slow Coronal Mass Ejections

Coronal Mass Ejections (CMEs) are the most energetic expulsions of magnetized plasma from the Sun that play a crucial role in space weather dynamics. This study investigates the diverse kinematics and thermodynamic evolution of two CMEs (CME1: 2011 September 24 and CME2: 2018 August 20) at coronal heights where thermodynamic measurements are limited. The peak 3D propagation speed of CME1 is high (1,885 km/s) with two-phase expansion (rapid and nearly constant), while the peak 3D propagation speed of CME2 is slow (420 km/s) with only a gradual expansion. We estimate the distance-dependent variations in the polytropic index, heating rate, temperature, and internal forces implementing the revised FRIS model, taking inputs of 3D kinematics estimated from the GCS model. We find CME1 exhibiting heat-release during its early-rapid acceleration decrease and jumps to the heat-absorption state during its constant acceleration phase. In contrast to CME1, CME2 shows a gradual transition from the near-adiabatic to the heat-absorption state during its gradually increasing acceleration. Our analysis reveals that although both CMEs show differential heating, they experience heat-absorption during their later propagation phases, approaching the isothermal state. The faster CME1 achieves an adiabatic state followed by an isothermal state at smaller distances from the Sun than the slower CME2. We also find that the expansion of CMEs is primarily influenced by centrifugal and thermal pressure forces, with the Lorentz force impeding expansion. Multi-wavelength observations of flux-ropes at source regions support the FRIS model-derived findings at initially observed lower coronal heights.

astro-ph.SR↗