arXiv subjects

Sounak Kar

Publications and source records attributed to Sounak Kar.

10 recordsLinked to original sources

arXiv2026

A Dynamic Multiplexing Policy for a Quantum Repeater

We consider a multiplexed quantum repeater that distributes entanglement between two end nodes. Multiplexing is achieved through optical integration of many quantum chips. Each chip hosts an optically addressable communication qubit and a separate memory qubit. The communication qubit serves as an entanglement generation interface between different quantum chips, and the memory qubit can be used to store entanglement. The quantum chips on the repeater are interconnected using a reconfigurable router, which makes it possible to dynamically assign quantum chips for entanglement generation with either of the two end nodes in every end-to-end communication cycle. We propose a dynamic multiplexing policy in which after an entangled link has been established with one of the end nodes, all remaining quantum chips are assigned to the opposite end node. We compare this dynamic policy to a policy in which the assignment of quantum chips to end nodes is fixed. We consider a parameter regime where on average less than one entangled link is generated per end-to-end communication cycle, which is the relevant regime for near-term quantum networks. We show that in this regime, the dynamic multiplexing policy can lead to a significant improvement in fidelity over a fixed policy, while marginally improving the rate. Moreover, even though the dynamic multiplexing policy requires a deeper, and hence, more lossy, router than the fixed policy, it can still achieve higher secret key rates in the parameter regime studied. This makes dynamic multiplexing with a many-quantum-chip repeater especially relevant for the development of near-term quantum networks.

quant-ph↗

arXiv2026

On Utility-optimal Entanglement Routing in Quantum Networks

Quantum networks are envisioned to enable reliable distribution and manipulation of quantum information across distances, forming the foundation of a future quantum internet. The fair and efficient allocation of communication resources in such networks has been addressed through the quantum network utility maximization (QNUM) framework, which optimizes network utility under the assumption of predetermined routes for competing user demands. In this work, we relax this assumption and aim to identify optimal routes that correspond to the maximum achievable network utility. Specifically, we formulate the single-path utility-based entanglement routing problem as a Mixed-Integer Convex Program (MICP). The formulation is exact when negativity is chosen as the entanglement measure for utility quantification or the network supports sufficiently high entanglement generation rates across demands. For other entanglement measures considered, the formulation approximates the problem with over 99.99% accuracy on evaluated real-world examples. To improve computational tractability, we propose a randomized rounding-based heuristic and an upper bound via the relaxation of the MICP. Furthermore, based on min-congestion routing, we introduce an alternative randomized heuristic and upper bound. This heuristic is computationally faster, while both the heuristic and the upper bound often outperform their counterparts on considered real-world networks. Our work provides the framework for extending classical flow-based and quality of service-aware routing concepts to quantum networks.

quant-ph↗

arXiv2026

Requirements for Teleportation in an Intercity Quantum Network

We investigate the hardware requirements for quantum teleportation in an intercity-scale network topology consisting of two metropolitan-scale networks connected via a long-distance backbone link. Specifically, we identify the minimal improvements required beyond the state-of-the-art to achieve an end-to-end expected teleportation fidelity of $2/3$, which represents the classical limit. To this end, we formulate the hardware requirements computation as optimisation problems, where the hardware parameters representing the underlying device capabilities serve as decision variables. Assuming a simplified noise model, we derive closed-form analytical expressions for the teleportation fidelity and rate when the network is realised using heterogeneous quantum hardware, including a quantum repeater chain with a memory cut-off. Our derivations are based on events defined by the order statistics of link generation durations in both the metropolitan networks and the backbone, and the resulting expressions are validated through simulations on the NetSquid platform. The analytical expressions facilitate efficient exploration of the optimisation parameter space without resorting to computationally intensive simulations. We then apply this framework to a representative realisation in which the metropolitan nodes are based on trapped-ion processors and the backbone is composed of ensemble-based quantum memories. Our results suggest that teleportation across metropolitan distances is already achievable with state-of-the-art hardware when the data qubit is prepared after end-to-end entanglement has already been established, whereas extending teleportation to intercity scales requires additional, though plausibly achievable, improvements in hardware performance.

quant-ph↗

arXiv2025

Entanglement buffering with multiple quantum memories

Entanglement buffers are systems that maintain high-quality entanglement, ensuring it is readily available for consumption when needed. In this work, we study the performance of a two-node buffer, where each node has one long-lived quantum memory for storing entanglement and multiple short-lived memories for generating fresh entanglement. Newly generated entanglement may be used to purify the stored entanglement, which degrades over time. Stored entanglement may be removed due to failed purification or consumption. We derive analytical expressions for the system performance, which is measured using the entanglement availability and the average fidelity upon consumption. Our solutions are computationally efficient to evaluate, and they provide fundamental bounds to the performance of purification-based entanglement buffers. We show that purification must be performed as frequently as possible to maximise the average fidelity of entanglement upon consumption, even if this often leads to the loss of high-quality entanglement due to purification failures. Moreover, we obtain heuristics for the design of good purification policies in practical systems. A key finding is that simple purification protocols, such as DEJMPS, often provide superior buffering performance compared to protocols that maximize output fidelity.

quant-ph↗

arXiv2024

Convexification of the Quantum Network Utility Maximisation Problem

Network Utility Maximisation (NUM) addresses the problem of allocating resources fairly within a network and explores the ways to achieve optimal allocation in real-world networks. Although extensively studied in classical networks, NUM is an emerging area of research in the context of quantum networks. In this work, we consider the quantum network utility maximisation (QNUM) problem in a static setting, where a user's utility takes into account the assigned quantum quality (fidelity) via a generic entanglement measure as well as the corresponding rate of entanglement generation. Under certain assumptions, we demonstrate that the QNUM problem can be formulated as an optimisation problem with the rate allocation vector as the only decision variable. Using a change of variable technique known in the field of geometric programming, we then establish sufficient conditions under which this formulation can be reduced to a convex problem, a class of optimisation problems that can be solved efficiently and with certainty even in high dimensions. We further show that this technique preserves convexity, enabling us to formulate convex QNUM problems in networks where some routes have certain entanglement measures that do not readily admit convex formulation, while others do. This allows us to compute the optimal resource allocation in networks where heterogeneous applications run over different routes.

cs.NI↗

arXiv2023

Optimal Decision Making in Active Queue Management

Active Queue Management (AQM) aims to prevent bufferbloat and serial drops in router and switch FIFO packet buffers that usually employ drop-tail queueing. AQM describes methods to send proactive feedback to TCP flow sources to regulate their rate using selective packet drops or markings. Traditionally, AQM policies relied on heuristics to approximately provide Quality of Service (QoS) such as a target delay for a given flow. These heuristics are usually based on simple network and TCP control models together with the monitored buffer filling. A primary drawback of these heuristics is that their way of accounting flow characteristics into the feedback mechanism and the corresponding effect on the state of congestion are not well understood. In this work, we show that taking a probabilistic model for the flow rates and the dequeueing pattern, a Semi-Markov Decision Process (SMDP) can be formulated to obtain an optimal packet-dropping policy. This policy-based AQM, named PAQMAN, takes into account a steady-state model of TCP and a target delay for the flows. Additionally, we present an inference algorithm that builds on TCP congestion control in order to calibrate the model parameters governing underlying network conditions. Using simulation, we show that the prescribed AQM yields comparable throughput to state-of-the-art AQM algorithms while reducing delays significantly.

cs.PF↗

arXiv2023

An Analysis of the Completion Time of the BB84 Protocol

The BB84 QKD protocol is based on the idea that the sender and the receiver can reconcile a certain fraction of the teleported qubits to detect eavesdropping or noise and decode the rest to use as a private key. Under the present hardware infrastructure, decoherence of quantum states poses a significant challenge to performing perfect or efficient teleportation, meaning that a teleportation-based protocol must be run multiple times to observe success. Thus, performance analyses of such protocols usually consider the completion time, i.e., the time until success, rather than the duration of a single attempt. Moreover, due to decoherence, the success of an attempt is in general dependent on the duration of individual phases of that attempt, as quantum states must wait in memory while the success or failure of a generation phase is communicated to the relevant parties. In this work, we do a performance analysis of the completion time of the BB84 protocol in a setting where the sender and the receiver are connected via a single quantum repeater and the only quantum channel between them does not see any adversarial attack. Assuming certain distributional forms for the generation and communication phases of teleportation, we provide a method to compute the MGF of the completion time and subsequently derive an estimate of the CDF and a bound on the tail probability. This result helps us gauge the (tail) behaviour of the completion time in terms of the parameters characterising the elementary phases of teleportation, without having to run the protocol multiple times. We also provide an efficient simulation scheme to generate the completion time, which relies on expressing the completion time in terms of aggregated teleportation times. We numerically compare our approach with a full-scale simulation and observe good agreement between them.

cs.PF↗

arXiv2020

On the Throughput Optimization in Large-Scale Batch-Processing Systems

We analyze a data-processing system with $n$ clients producing jobs which are processed in \textit{batches} by $m$ parallel servers; the system throughput critically depends on the batch size and a corresponding sub-additive speedup function. In practice, throughput optimization relies on numerical searches for the optimal batch size, a process that can take up to multiple days in existing commercial systems. In this paper, we model the system in terms of a closed queueing network; a standard Markovian analysis yields the optimal throughput in $ω\left(n^4\right)$ time. Our main contribution is a mean-field model of the system for the regime where the system size is large. We show that the mean-field model has a unique, globally attractive stationary point which can be found in closed form and which characterizes the asymptotic throughput of the system as a function of the batch size. Using this expression we find the \textit{asymptotically} optimal throughput in $O(1)$ time. Numerical settings from a large commercial system reveal that this asymptotic optimum is accurate in practical finite regimes.

cs.PF↗

arXiv2017

Collaborative Uploading in Heterogeneous Networks: Optimal and Adaptive Strategies

Collaborative uploading describes a type of crowdsourcing scenario in networked environments where a device utilizes multiple paths over neighboring devices to upload content to a centralized processing entity such as a cloud service. Intermediate devices may aggregate and preprocess this data stream. Such scenarios arise in the composition and aggregation of information, e.g., from smartphones or sensors. We use a queuing theoretic description of the collaborative uploading scenario, capturing the ability to split data into chunks that are then transmitted over multiple paths, and finally merged at the destination. We analyze replication and allocation strategies that control the mapping of data to paths and provide closed-form expressions that pinpoint the optimal strategy given a description of the paths' service distributions. Finally, we provide an online path-aware adaptation of the allocation strategy that uses statistical inference to sequentially minimize the expected waiting time for the uploaded data. Numerical results show the effectiveness of the adaptive approach compared to the proportional allocation and a variant of the join-the-shortest-queue allocation, especially for bursty path conditions.

cs.PF↗

arXiv2016

A Generalized Performance Evaluation Framework for Parallel Systems with Output Synchronization

Frameworks, such as MapReduce and Hadoop are abundant nowadays. They seek to reap benefits of parallelization, albeit subject to a synchronization constraint at the output. Fork-Join (FJ) queuing models are used to analyze such systems. Arriving jobs are split into tasks each of which is mapped to exactly one server. A job leaves the system when all of its tasks are executed. As a metric of performance, we consider waiting times for both work-conserving and non-work conserving server systems under a mathematical set-up general enough to take into account possible phase-type behavior of the servers, and as suggested by recent evidences, bursty arrivals. To this end, we present a Markov-additive process framework for an FJ system and provide computable bounds on tail probabilities of steady-state waiting times, for both types of servers separately. We apply our results to three scenarios, namely, non-renewal (Markov-modulated) arrivals, servers showing phase-type behavior, and Markov-modulated arrivals and services. We compare our bounds against estimates obtained through simulations and also provide a theoretical conceptualization of provisions in FJ systems. Finally, we calibrate our model with real data traces, and illustrate how our bounds can be used to devise provisions.

cs.PF↗