Searcharxiv⌕ Search

arXiv subjects

Sourav Biswas

Publications and source records attributed to Sourav Biswas.

26 records · Page 2Linked to original sources

Does shot noise always provide the quasiparticle charge?

The fractional charge of quasiparticles is a fundamental feature of quantum Hall effect (QHE) States. The charge has long been measured via shot-noise at moderate temperatures ($T$>30mK), with the Fano factor $F=e^*/e$ revealing the charge $e^*$ of the quasiparticles. However, at sufficiently low temperatures ($T\approx$10mK), we consistently find $F$ being equal to the bulk filling factor, $ν_b$. Surprisingly, noise with $F=ν_b$ is also observed on intermediate conductance plateaus in the transmission of the quantum point contact (QPC), where shot noise is not expected. We attribute the unexpected Fano factor to upstream neutral modes, which proliferate at the lowest spinless Landau level. The universality of the Fano factor is also confirmed when the edge modes do not conform to the bulk. For this, the ubiquitous edge modes at the periphery of the sample are replaced by artificially constructed 'interface modes', propagating at the interface between two adjoined QHE states: the tested state and a different state. We present a new theoretical paradigm based on an interplay between charge and neutral modes, explaining the origin of the universal Fano factor.

cond-mat.mes-hall↗

MuSCLE: Multi Sweep Compression of LiDAR using Deep Entropy Models

We present a novel compression algorithm for reducing the storage of LiDAR sensor data streams. Our model exploits spatio-temporal relationships across multiple LiDAR sweeps to reduce the bitrate of both geometry and intensity values. Towards this goal, we propose a novel conditional entropy model that models the probabilities of the octree symbols by considering both coarse level geometry and previous sweeps' geometric and intensity information. We then use the learned probability to encode the full data stream into a compact one. Our experiments demonstrate that our method significantly reduces the joint geometry and intensity bitrate over prior state-of-the-art LiDAR compression methods, with a reduction of 7-17% and 15-35% on the UrbanCity and SemanticKITTI datasets respectively.

eess.IV↗

Chiral Luttinger liquids in graphene tuned by irradiation

We show that chiral co-propagating Luttinger liquids can be created and tuned by shining high frequency, circularly polarized light, normal to the layers, with different polarizations on two sections of bilayer graphene. By virtue of the broken time-reversal symmetry and the resulting mismatch of Chern number, the one-dimensional chiral modes are localized along the domain wall where the polarization changes. Single layer graphene hosts a single chiral edge mode near each Dirac node, whereas in bilayer graphene, there are two chiral modes near each of the Dirac nodes. These modes, under a high-frequency drive, essentially have a static charge distribution and form a chiral Luttinger liquid under Coulomb interaction, which can be tuned by means of the driving parameters. We also note that unlike the Luttinger liquids created by electrostatic confinement in bilayer graphene, here there is no back-scattering, and hence our wires along the node are stable to disorder.

cond-mat.mes-hall↗

Elimination of thermal bistability in superconducting weak links by an inductive shunt

The quantum phase-coherent behavior of superconducting weak links (WL) is often quenched in the finite voltage state, due to the heat dissipation and related thermal hysteresis. The latter can be reduced by improving heat evacuation and/or by lowering the critical current, so that a phase-dynamic regime is obtained, albeit over a narrow bias-current and temperature range. Here we demonstrate that an inductive shunt with well-chosen parameters introduces unexpected nonlinear dynamics that destabilize an otherwise stable fixed point in the dissipative branch. This leads to a nonhysteretic behavior with large voltage oscillations in intrinsically hysteretic WL-based micron-size superconducting quantum interference devices. A dynamic thermal model quantitatively describes our observations and further allows us to elaborate on the optimal shunting conditions.

cond-mat.supr-con↗

Josephson Coupling in the Dissipative State of a Thermally Hysteretic $μ$-SQUID

Micron-sized superconducting interference devices ($μ$-SQUIDs) based on constrictions optimized for minimizing thermal runaway are shown to exhibit voltage oscillations with applied magnetic flux despite their hysteretic behavior. We explain this remarkable feature by a significant supercurrent contribution surviving deep into the resistive state, due to efficient heat evacuation. A resistively shunted junction model, complemented by a thermal balance determining the amplitude of the critical current, describes well all experimental observations, including the flux modulation of the (dynamic) retrapping current and voltage by introducing a single dimensionless parameter. Thus hysteretic $μ$-SQUIDs can be operated in the voltage read-out mode with a faster response. The quantitative modeling of this regime incorporating both heating and phase dynamics paves the way for further optimization of $μ$-SQUIDs for nano-magnetism.

cond-mat.supr-con↗

Micron size superconducting quantum interference devices of lead (Pb)

Micron size superconducting quantum interference devices ($μ$-SQUID) of lead (Pb), for probing nano-magnetism, were fabricated and characterized. In order to get continuous Pb films with small grain size, Pb was thermally evaporated on a liquid nitrogen cooled Si substrate. Pb was sandwiched between two thin Cr layers for improved adhesion and protection. The SQUID pattern was made by e-beam lithography with Pb lift-off after deposition. The current-voltage characteristics of these devices show a critical current, which exhibits the expected SQUID oscillations with magnetic field, and two re-trapping currents. As a result these devices have hysteresis at low temperatures, which disappears just below the critical temperature.

cond-mat.supr-con↗

Controlling hysteresis in superconducting constrictions with a resistive shunt

We demonstrate control of the thermal hysteresis in superconducting constrictions by adding a resistive shunt. In order to prevent thermal relaxation oscillations, the shunt resistor is placed in close vicinity of the constriction, making the inductive current-switching time smaller than the thermal equilibration time. We investigate the current-voltage characteristics of the same constriction with and without the shunt-resistor. The widening of the hysteresis-free temperature range is explained on the basis of a simple model.

cond-mat.supr-con↗

Temperature and phase dynamics in superconducting weak-link

A time dependent thermal model for a superconducting constriction based weak-link (WL) is discussed for investigating the deterministic dynamics of its temperature and phase. A new dynamic regime is found where a non-zero voltage exists across the WL and its temperature stabilizes between the bath temperature and superconductor's critical temperature. This regime exists over a limited bias current range and gives rise to a new hysteretic regime in current-voltage characteristics. We also discuss the effect of fluctuations on the current-voltage characteristics and experimental implications of this dynamic regime.

cond-mat.supr-con↗