arXiv subjects

Sriram Narayanan

Publications and source records attributed to Sriram Narayanan.

10 recordsLinked to original sources

arXiv2026

Reduced-Order Data Assimilation for Thermospheric Density Using Physics-informed SINDyc Models

Orbit prediction and space situational awareness require accurate thermospheric mass density, which responds nonlinearly to solar and geomagnetic forcing across several orders of magnitude. Physics-based general circulation models resolve that response but are computationally expensive, while empirical models run cheaply and carry no time-evolving atmospheric state. An autoregressive Sparse Identification of Nonlinear Dynamics with control (SINDyc-AR) model, derived from the Thermosphere-Ionosphere-Electrodynamics General Circulation Model (TIE-GCM), captures the dominant modes of variability and their dependence on the drivers at a fraction of the parent model's cost. An extended Kalman filter assimilates in situ observations from CHAMP, GRACE, GRACE-FO, GOCE, and Swarm into that model across several orbital configurations and geomagnetic conditions, with a linear DMDc model as reference. Assimilation reduces density error relative to open-loop prediction, most visibly during geomagnetic storms and under single-satellite coverage. The two reduced-order models perform comparably throughout. NRLMSIS 2.1 and HASDM can outperform the assimilated model far from the assimilated track, so results are framed as improvements over the open-loop forecast. An observation-calibrated global density record spanning August 2000 to December 2025 is released alongside this work.

eess.SY↗

arXiv2026

State Forecasting in an Estimation Framework with Surrogate Sensor Modeling

In recent years, computational power and data availability breakthroughs have revolutionized our ability to analyze complex physical systems through the inverse problem approach. Data-driven techniques like system identification and machine learning play an important role in this field, allowing us to gain insights into previously inaccessible phenomena. However, a major hurdle remains: How can meaningful information from partial measurements be extracted? In the aerospace domain, the challenge of state estimation is particularly pronounced due to the limited availability of observational data and the constraints imposed by sensor capabilities for tracking resident space objects (RSOs). To address these limitations, advanced compensation methodologies are required. Currently, range and bearing measurements obtained from radar and optical systems constitute the primary observational tools in the space situational awareness (SSA) community. In this work, we propose a novel framework that integrates a simplified reference dynamics model with a data-driven surrogate measurement model. This fusion process leverages the strengths of both models to estimate complex dynamical behaviors under conditions of partial observability. Extensive numerical experiments were conducted across multiple datasets to validate the proposed framework. The results demonstrate its efficacy in accurately reconstructing system dynamics from incomplete measurement data. Furthermore, to ensure the robustness of the framework, an initial consistency analysis of the surrogate modeling approach is presented. By addressing the current challenges and refining the integration of data-driven techniques with traditional physics-based modeling, this framework aims to advance state estimation methodologies in the aerospace sector.

eess.SY↗

arXiv2026

PhyCo: Learning Controllable Physical Priors for Generative Motion

Modern video diffusion models excel at appearance synthesis but still struggle with physical consistency: objects drift, collisions lack realistic rebound, and material responses seldom match their underlying properties. We present PhyCo, a framework that introduces continuous, interpretable, and physically grounded control into video generation. Our approach integrates three key components: (i) a large-scale dataset of over 100K photorealistic simulation videos where friction, restitution, deformation, and force are systematically varied across diverse scenarios; (ii) physics-supervised fine-tuning of a pretrained diffusion model using a ControlNet conditioned on pixel-aligned physical property maps; and (iii) VLM-guided reward optimization, where a fine-tuned vision-language model evaluates generated videos with targeted physics queries and provides differentiable feedback. This combination enables a generative model to produce physically consistent and controllable outputs through variations in physical attributes-without any simulator or geometry reconstruction at inference. On the Physics-IQ benchmark, PhyCo significantly improves physical realism over strong baselines, and human studies confirm clearer and more faithful control over physical attributes. Our results demonstrate a scalable path toward physically consistent, controllable generative video models that generalize beyond synthetic training environments.

cs.CV↗

arXiv2026

Dual Band Thermal Videography: Separating Time-Varying Reflection and Emission Near Ambient Conditions

Long-wave infrared radiation captured by a thermal camera includes (a) emission from an object governed by its temperature and emissivity, and (b) reflected radiation from the surrounding environment. Separating these components is a long-standing challenge in thermography. Even when using multiple bands, the problem is under-determined without priors on emissivity. This difficulty is amplified in near ambient conditions, where emitted and reflected signals are of comparable magnitude. We present a dual-band thermal videography framework that reduces this ambiguity by combining two complementary ideas at a per-pixel level: (i) spectral cues (ratio of emissivity between bands is unknown but fixed), and (ii) temporal cues (object radiation changes smoothly while background radiation changes rapidly). We derive an image formation model and an algorithm to jointly estimate the object's emissivity at each band, and the time-varying object and background temperatures. Experiments with calibrated and uncalibrated emissivities in everyday scenes (e.g., coffee pot heating up, palm print on mirrors, reflections of moving people), demonstrate robust separation and recovery of temperature fields.

cs.CV↗

arXiv2025

Indoor Heat Estimation from a Single Visible-Light Panorama

This paper introduces a novel image-based rendering technique for jointly estimating indoor lighting and thermal conditions from paired indoor-outdoor high dynamic range (HDR) panoramas. Our method uses the indoor panorama to estimate the 3D floor layout, while the corresponding outdoor panorama serves as an environment map to infer spatially-varying illumination and material properties. Assuming indoor surfaces are Lambertian and that all heat originates from outdoor visible light, we model the relationship between light transport and heat transfer, and perform transient heat simulations to generate indoor temperature distributions. The simulated heat maps are validated against real-world thermal images captured with an infrared camera. This approach supports photorealistic and physically informed visualization, enabling integrated light and heat estimation to advance traditional virtual home staging.

cs.CV↗

arXiv2024

Time-delayed Dynamic Mode Decomposition for families of periodic trajectories in Cislunar Space

In recent years, the development of the Lunar Gateway and Artemis missions has renewed interest in lunar exploration, including both manned and unmanned missions. This interest necessitates accurate initial orbit determination (IOD) and orbit prediction (OP) in this domain, which faces significant challenges such as severe nonlinearity, sensitivity to initial conditions, large state-space volume, and sparse, faint, and unreliable measurements. This paper explores the capability of data-driven Koopman operator-based approximations for OP in these scenarios. Three stable periodic trajectories from distinct cislunar families are analyzed. The analysis includes theoretical justification for using a linear time-invariant system as the data-driven surrogate. This theoretical framework is supported by experimental validation. Furthermore, the accuracy is assessed by comparing the spectral content captured to period estimates derived from the fast Fourier transform (FFT) and Poincare-like sections.

eess.SY↗

arXiv2024

On the Effect of Quantization on Dynamic Mode Decomposition

Dynamic Mode Decomposition (DMD) is a widely used data-driven algorithm for estimating the Koopman Operator.This paper investigates how the estimation process is affected when the data is quantized. Specifically, we examine the fundamental connection between estimates of the operator obtained from unquantized data and those from quantized data. Furthermore, using the law of large numbers, we demonstrate that, under a large data regime, the quantized estimate can be considered a regularized version of the unquantized estimate. This key theoretical finding paves the way to accurately recover the unquantized estimate from quantized data. We also explore the relationship between the two estimates in the finite data regime. The theory is validated through repeated numerical experiments conducted on three different dynamical systems.

eess.SY↗

arXiv2024

On the Predictive Capability of Dynamic Mode Decomposition for Nonlinear Periodic Systems with Focus on Orbital Mechanics

This paper discusses the predictive capability of Dynamic Mode Decomposition (DMD) in the context of orbital mechanics. The focus is specifically on the Hankel variant of DMD which uses a stacked set of time-delayed observations for system identification and subsequent prediction. A theory on the minimum number of time delays required for accurate reconstruction of periodic trajectories of nonlinear systems is presented and corroborated using experimental analysis. In addition, the window size for training and prediction regions, respectively, is presented. The need for a meticulous approach while using DMD is emphasized by drawing comparisons between its performance on two candidate satellites, the ISS and MOLNIYA-3-50.

eess.SY↗

arXiv2022

Long-HOT: A Modular Hierarchical Approach for Long-Horizon Object Transport

We address key challenges in long-horizon embodied exploration and navigation by proposing a new object transport task and a novel modular framework for temporally extended navigation. Our first contribution is the design of a novel Long-HOT environment focused on deep exploration and long-horizon planning where the agent is required to efficiently find and pick up target objects to be carried and dropped at a goal location, with load constraints and optional access to a container if it finds one. Further, we propose a modular hierarchical transport policy (HTP) that builds a topological graph of the scene to perform exploration with the help of weighted frontiers. Our hierarchical approach uses a combination of motion planning algorithms to reach point goals within explored locations and object navigation policies for moving towards semantic targets at unknown locations. Experiments on both our proposed Habitat transport task and on MultiOn benchmarks show that our method significantly outperforms baselines and prior works. Further, we validate the effectiveness of our modular approach for long-horizon transport by demonstrating meaningful generalization to much harder transport scenes with training only on simpler versions of the task.

cs.CV↗

arXiv2021

Divide-and-Conquer for Lane-Aware Diverse Trajectory Prediction

Trajectory prediction is a safety-critical tool for autonomous vehicles to plan and execute actions. Our work addresses two key challenges in trajectory prediction, learning multimodal outputs, and better predictions by imposing constraints using driving knowledge. Recent methods have achieved strong performances using Multi-Choice Learning objectives like winner-takes-all (WTA) or best-of-many. But the impact of those methods in learning diverse hypotheses is under-studied as such objectives highly depend on their initialization for diversity. As our first contribution, we propose a novel Divide-And-Conquer (DAC) approach that acts as a better initialization technique to WTA objective, resulting in diverse outputs without any spurious modes. Our second contribution is a novel trajectory prediction framework called ALAN that uses existing lane centerlines as anchors to provide trajectories constrained to the input lanes. Our framework provides multi-agent trajectory outputs in a forward pass by capturing interactions through hypercolumn descriptors and incorporating scene information in the form of rasterized images and per-agent lane anchors. Experiments on synthetic and real data show that the proposed DAC captures the data distribution better compare to other WTA family of objectives. Further, we show that our ALAN approach provides on par or better performance with SOTA methods evaluated on Nuscenes urban driving benchmark.

cs.CV↗