arXiv subjects

Stefan Forstner

Publications and source records attributed to Stefan Forstner.

16 recordsLinked to original sources

arXiv2026

Current-based RF charge sensing in a carbon nanotube

Ultra-sensitive charge detection is a widely used tool for quantum electronics with applications in quantum information processing and in probing the physics of condensed matter systems. Existing approaches require either an impedance-matched resonant circuit, or millimeter-scale proximity between amplifier and sample, both adding complexity and constraining device design. In this work, we introduce a current-mode charge sensor in a suspended carbon nanotube, operating at the $1.25$ MHz resonance of an RLC tank circuit and achieving a charge sensitivity of $0.15~\mu e/\sqrt{\mathrm{Hz}}$. We utilize it to measure a double quantum dot (DQD) electrostatically defined in the same nanotube, revealing a highly regular charge stability diagram. We perform single-shot readout of the DQD charge state at an integration time of $3.56~\mu\mathrm{s}$, without any false assignments over $10^{7}$ measurements and a signal-to-noise ratio of 17 exceeding the state of the art.

cond-mat.mes-hall↗

arXiv2026

Tunable nonlinear electromechanics at the zero-point motion scale

Nonlinearity at the scale of zero-point motion opens new possibilities for the control and readout of nanomechanical systems, but achieving this remains a formidable challenge. Here we demonstrate that ultrastrong coupling (USC) between a nanotube mechanical oscillator and a double-quantum-dot electronic two-level system enables a mechanical Kerr (Duffing) nonlinearity at the zero-point motion scale. In the dispersive regime, this large coupling yields a mechanical anharmonicity of $\alpha = 1.4\%$ - three orders of magnitude larger than in previous work - while preserving the predominantly mechanical nature of the lowest energy states. We further demonstrate a purely quadratic cavity-based continuous readout of the mechanical motion. This continuous nonlinear optomechanical readout is enforced by a double-quantum dot symmetry, which can be broken by gate tuning to introduce a large linear transduction. These results establish a tunable USC platform that enables strong mechanical anharmonicity and nonlinear continuous readout at the zero-point motion scale.

quant-ph↗

arXiv2025

Emergent Bell Phase in an Electro-Nanomechanical Quantum Simulator

Suspended carbon nanotubes hosting electrostatically defined quantum dots allow for exceptionally strong and tunable electromechanical coupling as well as mechanical modes that can reach the quantum ground state of motion simply by cryogenic cooling. This makes them a unique platform for quantum simulation of electron-phonon coupling. Here, we propose an experimentally realisable setup with two such carbon nanotubes in parallel, each hosting four quantum dots. Our system not only exhibits phonon-mediated electron-electron attraction, but also supports a robust, maximally entangled Bell phase at mesoscopic scales shared across the subsystems. These features highlight its potential as a simulator of strongly correlated quantum systems.

quant-ph↗

arXiv2022

Testing spontaneous wavefunction collapse with quantum electromechanics

Theories of spontaneous wavefunction collapse offer an explanation of the possible breakdown of quantum mechanics for macroscopic systems. However, the challenge of resolving predicted collapse signatures above background noise has precluded conclusive tests. Here, we propose to overcome this challenge using a superconducting qubit to precisely readout the collapse-induced heating of a mechanical resonator. We show that the ability to strongly couple the qubit to the resonator can enable both fast measurements and initialization of the qubit close to its ground state. Combined this greatly suppresses the influence of quasiparticle heating of the qubit, which we predict to be the dominant noise source. We find that bulk acoustic wave resonances can amplify the collapse induced heating due to their ultra-low dissipation. Together, this could enable a conclusive test of collapse models.

quant-ph↗

arXiv2022

Steady-state Peierls transition in nanotube quantum simulator

Quantum dots placed along a vibrating nanotube provide a quantum simulation platform that can directly address the electron-phonon interaction. This offers promising prospects for the search of new quantum materials and the study of strong correlation effects. As this platform is naturally operated by coupling the dots to an electronic reservoir, state preparation is straightforwardly achieved by driving into the steady state. Here we show that for intermediate electron-phonon coupling strength, the system with spin-polarized quantum dots undergoes a Peierls transition into an insulating regime which exhibits charge-density wave order in the steady state as a consequence of the competition between electronic Coulomb repulsive interactions and phonon-induced attractive interactions. The transport phenomena can be directly observed as fingerprints of electronic correlations. We also present powerful methods to numerically capture the physics of such an open electron-phonon system at large numbers of phonons. Our work paves the way to study and detect correlated electron-phonon physics in the nanotube quantum simulator with current experimentally accessible techniques.

cond-mat.str-el↗

arXiv2021

Precision Magnetometers for Aerospace Applications

Aerospace technologies are crucial for modern civilization; space-based infrastructure underpins weather forecasting, communications, terrestrial navigation and logistics, planetary observations, solar monitoring, and other indispensable capabilities. Extraplanetary exploration -- including orbital surveys and (more recently) roving, flying, or submersible unmanned vehicles -- is also a key scientific and technological frontier, believed by many to be paramount to the long-term survival and prosperity of humanity. All of these aerospace applications require reliable control of the craft and the ability to record high-precision measurements of physical quantities. Magnetometers deliver on both of these aspects, and have been vital to the success of numerous missions. In this review paper, we provide an introduction to the relevant instruments and their applications. We consider past and present magnetometers, their proven aerospace applications, and emerging uses. We then look to the future, reviewing recent progress in magnetometer technology. We particularly focus on magnetometers that use optical readout, including atomic magnetometers, magnetometers based on quantum defects in diamond, and optomechanical magnetometers. These optical magnetometers offer a combination of field sensitivity, size, weight, and power consumption that allows them to reach performance regimes that are inaccessible with existing techniques. This promises to enable new applications in areas ranging from unmanned vehicles to navigation and exploration.

physics.app-ph↗

arXiv2021

Ultrasensitive optical magnetometry at the microscale

Recent advances in optical magnetometry have achieved record sensitivity at both macro- and nano-scale. Combined with high bandwidth and non-cryogenic operation, this has enabled many applications. By comparison, microscale optical magnetometers have been constrained to sensitivities five orders-of-magnitude worse than the state-of-the-art. Here, we report an ambient optical micro-magnetometer operating for the first time in the picoTesla range, a more than three order-of-magnitude advance on previous results. Unlike other ultrasensitive optical magnetometers, the device operates at earth field, achieves tens of MHz bandwidth, and is integrated and fiber coupled. Combined with 60 micrometer spatial resolution and microWatt optical power requirements, these unique capabilities open up a broad range of applications including cryogen-free and microfluidic magnetic resonance imaging, and electromagnetic interference-free investigation of spin physics in condensed matter systems such as semiconductors and ultracold atom clouds

physics.optics↗

arXiv2020

Ultra-broadband and sensitive cavity optomechanical magnetometry

Magnetostrictive optomechanical cavities provide a new optically-readout approach to room temperature magnetometry. Here we report ultrasensitive and ultrahigh bandwidth cavity optomechanical magnetometers constructed by embedding a grain of the magnetostrictive material Terfenol-D within a high quality (Q) optical microcavity on a silicon chip. By engineering their physical structure, we achieve a peak sensitivity of 26 pT/Hz^1/2 comparable to the best cryogenic microscale magnetometers, along with a 3~dB bandwidth as high as 11.3 MHz. Two classes of magnetic response are observed, which we postulate arise from the crystallinity of the Terfenol-D. This allows single- and poly-crystalline grains to be distinguished at the level of a single particle. Our results may enable applications such as lab-on-chip nuclear magnetic spectroscopy and magnetic navigation.

physics.app-ph↗

arXiv2019

Nanomechanical test of quantum linearity

Spontaneous wavefunction collapse theories provide the possibility to resolve the measurement problem of quantum mechanics. However, the best experimental tests have been limited by thermal fluctuations and have operated at frequencies far below those conjectured to allow the physical origins of collapse to be identified. Here we propose to use high-frequency nanomechanical resonators to surpass these limitations. We consider a specific implementation that uses a quantum optomechanical system cooled to near its motional ground state. The scheme combines phonon counting with efficient mitigation of technical noise, including non-linear photon conversion and photon coincidence counting. It is capable of resolving the exquisitely small phonon fluxes required for a conclusive test of collapse models as well as potentially identifying their physical origin.

quant-ph↗

arXiv2019

Strong optical coupling through superfluid Brillouin lasing

Brillouin scattering has applications ranging from signal processing, sensing and microscopy, to quantum information and fundamental science. Most of these applications rely on the electrostrictive interaction between light and phonons. Here we show that in liquids optically-induced surface deformations can provide an alternative and far stronger interaction. This allows the demonstration of ultralow threshold Brillouin lasing and strong phonon-mediated optical coupling for the first time. This form of strong coupling is a key capability for Brillouin-reconfigurable optical switches and circuits, for photonic quantum interfaces, and to generate synthetic electromagnetic fields. While applicable to liquids quite generally, our demonstration uses superfluid helium. Configured as a Brillouin gyroscope this provides the prospect of measuring superfluid circulation with unprecedented precision, and to explore the rich physics of quantum fluid dynamics, from quantized vorticity to quantum turbulence.

physics.optics↗

arXiv2019

Modelling of vorticity, sound and their interaction in two-dimensional superfluids

Vorticity in two-dimensional superfluids is subject to intense research efforts due to its role in quantum turbulence, dissipation and the BKT phase transition. Interaction of sound and vortices is of broad importance in Bose-Einstein condensates and superfluid helium [1-4]. However, both the modelling of the vortex flow field and of its interaction with sound are complicated hydrodynamic problems, with analytic solutions only available in special cases. In this work, we develop methods to compute both the vortex and sound flow fields in an arbitrary two-dimensional domain. Further, we analyse the dispersive interaction of vortices with sound modes in a two-dimensional superfluid and develop a model that quantifies this interaction for any vortex distribution on any two-dimensional bounded domain, possibly non-simply connected, exploiting analogies with fluid dynamics of an ideal gas and electrostatics. As an example application we use this technique to propose an experiment that should be able to unambiguously detect single circulation quanta in a helium thin film.

cond-mat.quant-gas↗

arXiv2019

Coherent vortex dynamics in a strongly-interacting superfluid on a silicon chip

Two-dimensional superfluidity and quantum turbulence are directly connected to the microscopic dynamics of quantized vortices. However, surface effects have prevented direct observations of coherent vortex dynamics in strongly-interacting two-dimensional systems. Here, we overcome this challenge by confining a two-dimensional droplet of superfluid helium at microscale on the atomically-smooth surface of a silicon chip. An on-chip optical microcavity allows laser-initiation of vortex clusters and nondestructive observation of their decay in a single shot. Coherent dynamics dominate, with thermal vortex diffusion suppressed by six orders-of-magnitude. This establishes a new on-chip platform to study emergent phenomena in strongly-interacting superfluids, test astrophysical dynamics such as those in the superfluid core of neutron stars in the laboratory, and construct quantum technologies such as precision inertial sensors.

cond-mat.other↗

arXiv2018

Precision ultrasound sensing on a chip

Ultrasound sensors have wide applications across science and technology. However, improved sensitivity is required for both miniaturisation and increased spatial resolution. Here, we introduce cavity optomechanical ultrasound sensing, where dual optical and mechanical resonances enhance the ultrasound signal. We achieve noise equivalent pressures of 8--300 $μ$Pa/$\sqrt{\rm Hz}$ at kilohertz to megahertz frequencies in a microscale silicon-chip-based sensor with $>$120 dB dynamic range. The sensitivity far exceeds similar sensors that use optical resonance alone and, normalised to sensing area, surpasses previous air-coupled ultrasound sensors by several orders of magnitude. The noise floor is, for the first time, dominated by collisions from molecules in the gas within which the acoustic wave propagates. This new approach to acoustic sensing could find applications ranging from biomedical diagnostics, to autonomous navigation, trace gas sensing, and scientific exploration of the life-induced-vibrations of single cells.

quant-ph↗

arXiv2018

On-chip scalable optomechanical magnetometers

The dual-resonant enhancement of mechanical and optical response in cavity optomechanical magnetometers enables precision sensing of magnetic fields. In previous working prototypes of such magnetometers, a cavity optomechanical system is functionalized by manually epoxy-bonding a grain of magnetostrictive material. While this approach allows proof-of-principle demonstrations, practical applications require more scalable and reproducible fabrication pathways. In this work, we scalably fabricate optomechanical magnetometers on a silicon chip, with reproducible performance across different devices, by sputter coating a magnetostrictive film onto high quality toroidal microresonators. Furthermore, we demonstrate that thermally annealing the sputtered film can improve the magnetometer sensitivity by a factor of 6.3. A peak sensitivity of 585 pT/Hz^1/2 is achieved, which is comparable with previously reported results using epoxy-bonding.

physics.app-ph↗

arXiv2018

Modelling of cavity optomechanical magnetometers

Cavity optomechanical magnetic field sensors, constructed by coupling a magnetostrictive material to a micro-toroidal optical cavity, act as ultra-sensitive room temperature magnetometers with tens of micrometre size and broad bandwidth, combined with a simple operating scheme. Here, we develop a general recipe for predicting the field sensitivity of these devices. Several geometries are analysed, with a highest predicted sensitivity of 180~p$\textrm{T}/\sqrt{\textrm{Hz}}$ at 28~$μ$m resolution limited by thermal noise in good agreement with previous experimental observations. Furthermore, by adjusting the composition of the magnetostrictive material and its annealing process, a sensitivity as good as 20~p$\textrm{T}/\sqrt{\textrm{Hz}}$ may be possible at the same resolution. This method paves a way for future design of magnetostrictive material based optomechanical magnetometers, possibly allowing both scalar and vectorial magnetometers.

physics.app-ph↗

arXiv2018

Quantum enhanced optomechanical magnetometry

The resonant enhancement of both mechanical and optical response in microcavity optomechanical devices allows exquisitely sensitive measurements of stimuli such as acceleration, mass and magnetic fields. In this work, we show that quantum correlated light can improve the performance of such sensors, increasing both their sensitivity and their bandwidth. Specifically, we develop a silicon-chip based cavity optomechanical magnetometer that incorporates phase squeezed light to suppress optical shot noise. At frequencies where shot noise is the dominant noise source this allows a 20% improvement in magnetic field sensitivity. Furthermore, squeezed light broadens the range of frequencies at which thermal noise dominates, which has the effect of increasing the overall sensor bandwidth by 50%. These proof-of-principle results open the door to apply quantum correlated light more broadly in chip-scale sensors and devices.

physics.optics↗