SearcharxivSearch

arXiv subjects

Stefan Kuhn

Publications and source records attributed to Stefan Kuhn.

18 recordsLinked to original sources

Reversible Deep Learning for 13C NMR in Chemoinformatics: On Structures and Spectra

We introduce a reversible deep learning model for 13C NMR that uses a single conditional invertible neural network for both directions between molecular structures and spectra. The network is built from i-RevNet style bijective blocks, so the forward map and its inverse are available by construction. We train the model to predict a 128-bit binned spectrum code from a graph-based structure encoding, while the remaining latent dimensions capture residual variability. At inference time, we invert the same trained network to generate structure candidates from a spectrum code, which explicitly represents the one-to-many nature of spectrum-to-structure inference. On a filtered subset, the model is numerically invertible on trained examples, achieves spectrum-code prediction above chance, and produces coarse but meaningful structural signals when inverted on validation spectra. These results demonstrate that invertible architectures can unify spectrum prediction and uncertainty-aware candidate generation within one end-to-end model.

cs.LG

Quantum Computing for High-Energy Physics: State of the Art and Challenges. Summary of the QC4HEP Working Group

Quantum computers offer an intriguing path for a paradigmatic change of computing in the natural sciences and beyond, with the potential for achieving a so-called quantum advantage, namely a significant (in some cases exponential) speed-up of numerical simulations. The rapid development of hardware devices with various realizations of qubits enables the execution of small scale but representative applications on quantum computers. In particular, the high-energy physics community plays a pivotal role in accessing the power of quantum computing, since the field is a driving source for challenging computational problems. This concerns, on the theoretical side, the exploration of models which are very hard or even impossible to address with classical techniques and, on the experimental side, the enormous data challenge of newly emerging experiments, such as the upgrade of the Large Hadron Collider. In this roadmap paper, led by CERN, DESY and IBM, we provide the status of high-energy physics quantum computations and give examples for theoretical and experimental target benchmark applications, which can be addressed in the near future. Having the IBM 100 x 100 challenge in mind, where possible, we also provide resource estimates for the examples given using error mitigated quantum computing.

quant-ph

NMR shift prediction from small data quantities

Prediction of chemical shift in NMR using machine learning methods is typically done with the maximum amount of data available to achieve the best results. In some cases, such large amounts of data are not available, e.g. for heteronuclei. We demonstrate a novel machine learning model which is able to achieve good results with comparatively low amounts of data. We show this by predicting 19F and 13C NMR chemical shifts of small molecules in specific solvents.

physics.chem-ph

Direct deduction of chemical class from NMR spectra

This paper presents a proof-of-concept method for classifying chemical compounds directly from NMR data without doing structure elucidation. This can help to reduce time in finding good structure candidates, as in most cases matching must be done by a human engineer, or at the very least a process for matching must be meaningfully interpreted by one. Therefore, for a long time automation in the area of NMR has been actively sought. The method identified as suitable for the classification is a convolutional neural network (CNN). Other methods, including clustering and image registration, have not been found suitable for the task in a comparative analysis. The result shows that deep learning can offer solutions to automation problems in cheminformatics.

physics.chem-ph

Laser Cooling of a Yb Doped Silica Fiber by 18 Kelvin From Room Temperature

A ytterbium doped silica optical fiber has been cooled by 18.4K below ambient temperature by pumping with 20W of 1035nm light in vacuum. In air, cooling by 3.6K below ambient was observed with the same 20W pump. The temperatures were measured with a thermal imaging camera and differential luminescence thermometry. The cooling efficiency is calculated to be 1.2+-0.1%. The core of the fiber was codoped with Al3+ for an Al to Yb ratio of 6:1, to allow for a larger Yb concentration and enhanced laser cooling.

physics.optics

Executable Interval Temporal Logic Specifications

In this paper the reversibility of executable Interval Temporal Logic (ITL) specifications is investigated. ITL allows for the reasoning about systems in terms of behaviours which are represented as non-empty sequences of states. It allows for the specification of systems at different levels of abstraction. At a high level this specification is in terms of properties, for instance safety and liveness properties. At concrete level one can specify a system in terms of programming constructs. One can execute these concrete specification, i.e., test and simulate the behaviour of the system. In this paper we will formalise this notion of executability of ITL specifications. ITL also has a reflection operator which allows for the reasoning about reversed behaviours. We will investigate the reversibility of executable ITL specifications, i.e., how one can use this reflection operator to reverse the concrete behaviour of a particular system.

cs.FL

A Pilot Study For Fragment Identification Using 2D NMR and Deep Learning

This paper presents a method to identify substructures in NMR spectra of mixtures, specifically 2D spectra, using a bespoke image-based Convolutional Neural Network application. This is done using HSQC and HMBC spectra separately and in combination. The application can reliably detect substructures in pure compounds, using a simple network. It can work for mixtures when trained on pure compounds only. HMBC data and the combination of HMBC and HSQC show better results than HSQC alone.

q-bio.QM

Experimental Investigations on the TMI Thresholds of Low-NA Yb-doped single mode fibers

In this contribution we investigate the transversal mode instability behavior of an ytterbium doped commercial 20/400 fiber and obtain 2.9 kW of output power after optimizing the influencing parameters. In this context, we evaluate the influence of the bend diameter and the pump wavelength within the scope of the absorption length and the length of the fiber. Furthermore with a newly developed fiber we report on 4.4 kW of single-mode output power at 40 cm bend diameter.

physics.optics

Laser-induced anti-Stokes fluorescence cooling of ytterbium-doped silica glass by more than 6 Kelvin

Laser cooling of a solid is achieved when a coherent laser illuminates the material, and the heat is extracted by resulting anti-Stokes fluorescence. Over the past year, net solid-state laser cooling was successfully demonstrated for the first time in Yb-doped silica glass in both bulk samples and fibers. Here, we improve the previously published results by one order of magnitude and report more than 6K of cooling below the ambient temperature. This result is the lowest temperature achieved in solid-state laser cooling of silica glass to date to the best of our knowledge. We present details on the experiment performed using a 20W laser operating at 1035nm wavelength and temperature measurements using both a thermal camera and the differential luminescence thermometry technique.

physics.optics

Laser Cooling of Silica Glass

Laser cooling of a solid is achieved when a coherent laser illuminates the material in the red tail of its absorption spectrum, and the heat is carried out by anti-Stokes fluorescence of the blue-shifted photons. Solid-state laser cooling has been successfully demonstrated in several materials, including rare-earth-doped crystals and glasses. Silica glass, being the most widely used optical material, has so far evaded all laser cooling attempts. In addition to its fundamental importance, many potential applications can be conceived for anti-Stokes fluorescence cooling of silica. These potential applications range from the substrate cooling of optical circuits for quantum information processing and cryogenic cooling of mirrors in high-sensitivity interferometers for gravitational wave detection to the heating reduction in high-power fiber lasers and amplifiers. Here we report the net cooling of high-purity Yb-doped silica glass samples that are primarily developed for high-power fiber laser applications, where special care has been taken in the fabrication process to reduce their impurities and lower their parasitic background loss. The non-radiative decay rate of the excited state in Yb ions is very small in these glasses due to the low level of impurities, resulting in near-unity quantum efficiency. We report the measurement of the cooling efficiency as a function of the laser wavelength, from which the quantum efficiency of the silica glass is calculated.

physics.optics

Probing Macroscopic Quantum Superpositions with Nanorotors

Whether quantum physics is universally valid is an open question with far-reaching implications. Intense research is therefore invested into testing the quantum superposition principle with ever heavier and more complex objects. Here we propose a radically new, experimentally viable route towards studies at the quantum-to-classical borderline by probing the orientational quantum revivals of a nanoscale rigid rotor. The proposed interference experiment testifies a macroscopic superposition of all possible orientations. It requires no diffraction grating, uses only a single levitated particle, and works with moderate motional temperatures under realistic environmental conditions. The first exploitation of quantum rotations of a massive object opens the door to new tests of quantum physics with submicron particles and to quantum gyroscopic torque sensors, holding the potential to improve state-of-the art devices by many orders of magnitude.

quant-ph

Nanoparticle detection in an open-access silicon microcavity

We report on the detection of free nanoparticles in a micromachined, open-access Fabry-Pérot microcavity. With a mirror separation of $130\,μ$m, a radius of curvature of $1.3\,$mm, and a beam waist of $12\,μ$m, the mode volume of our symmetric infrared cavity is smaller than $15\,$pL. The small beam waist, together with a finesse exceeding 34,000, enables the detection of nano-scale dielectric particles in high vacuum. This device allows monitoring of the motion of individual $150\,$nm radius silica nanospheres in real time. We observe strong coupling between the particles and the cavity field, a precondition for optomechanical control. We discuss the prospects for optical cooling and detection of dielectric particles smaller than $10\,$nm in radius and $1\times10^7\,$amu in mass.

quant-ph

Optically driven ultra-stable nanomechanical rotor

Nanomechanical devices have attracted the interest of a growing interdisciplinary research community, since they can be used as highly sensitive transducers for various physical quantities. Exquisite control over these systems facilitates experiments on the foundations of physics. Here, we demonstrate that an optically trapped silicon nanorod, set into rotation at MHz frequencies, can be locked to an external clock, transducing the properties of the time standard to the rod's motion with the remarkable frequency stability $f_{\rm r}/Δf_{\rm r}$ of $7.7 \times 10^{11}$. While the dynamics of this periodically driven rotor generally can be chaotic, we derive and verify that stable limit cycles exist over a surprisingly wide parameter range. This robustness should enable, in principle, measurements of external torques with sensitivities better than 0.25zNm, even at room temperature. We show that in a dilute gas, real-time phase measurements on the locked nanorod transduce pressure values with a sensitivity of 0.3%.

quant-ph

Full Rotational Control of Levitated Silicon Nanorods

We study a nanofabricated silicon rod levitated in an optical trap. By manipulating the polarization of the light we gain full control over the ro-translational dynamics of the rod. We are able to trap both its centre-of-mass and align it along the linear polarization of the laser field. The rod can be set into rotation at a tuned frequency by exploiting the radiation pressure exerted by elliptically polarized light. The rotational motion of the rod dynamically modifies the optical potential, which allows tuning of the rotational frequency over hundreds of Kilohertz. This ability to trap and control the motion and alignment of nanoparticles opens up the field of rotational optomechanics, rotational ground state cooling and the study of rotational thermodynamics in the underdamped regime.

quant-ph

Ro-Translational Cavity Cooling of Dielectric Rods and Disks

We study the interaction of dielectric rods and disks with the laser field of a high finesse cavity. The quantum master equation for the coupled particle-cavity dynamics, including Rayleigh scattering, is derived for particle sizes comparable to the laser wavelength. We demonstrate that such anisotropic nanoparticles can be captured from free flight at velocities higher than those required to capture dielectric spheres of the same volume, and that efficient ro-translational cavity cooling into the deep quantum regime is achievable.

quant-ph

Cavity-assisted manipulation of freely rotating silicon nanorods in high vacuum

Optical control of nanoscale objects has recently developed into a thriving field of research with far-reaching promises for precision measurements, fundamental quantum physics and studies on single-particle thermodynamics. Here, we demonstrate the optical manipulation of silicon nanorods in high vacuum. Initially, we sculpture these particles into a silicon substrate with a tailored geometry to facilitate their launch into high vacuum by laser-induced mechanical cleavage. We manipulate and trace their center-of-mass and rotational motion through the interaction with an intense intra-cavity field. Our experiments show optical forces on nanorotors three times stronger than on silicon nanospheres of the same mass. The optical torque experienced by the spinning rods will enable cooling of the rotational motion and torsional opto-mechanics in a dissipation-free environment.

quant-ph

Cavity cooling of free silicon nanoparticles in high-vacuum

Laser cooling has given a boost to atomic physics throughout the last thirty years since it allows one to prepare atoms in motional states which can only be described by quantum mechanics. Most methods, such as Doppler cooling, polarization gradient cooling or sub-recoil laser cooling rely, however, on a near-resonant and cyclic coupling between laser light and well-defined internal states. Although this feat has recently even been achieved for diatomic molecules, it is very hard for mesoscopic particles. It has been proposed that an external cavity may compensate for the lack of internal cycling transitions in dielectric objects and it may thus provide assistance in the cooling of their centre of mass state. Here, we demonstrate cavity cooling of the transverse kinetic energy of silicon nanoparticles propagating in genuine high-vacuum (< 10^8 mbar). We create and launch them with longitudinal velocities even down to v < 1 m/s using laser induced thermomechanical stress on a pristine silicon wafer. The interaction with the light of a high-finesse infrared cavity reduces their transverse kinetic energy by more than a factor of 30. This is an important step towards new tests of recent proposals to explore the still speculative non-linearities of quantum mechanics with objects in the mass range between 10^7 and 10^10 amu.

quant-ph

Optimal Camera Placement to measure Distances Conservativly Regarding Static and Dynamic Obstacles

In modern production facilities industrial robots and humans are supposed to interact sharing a common working area. In order to avoid collisions, the distances between objects need to be measured conservatively which can be done by a camera network. To estimate the acquired distance, unmodelled objects, e.g., an interacting human, need to be modelled and distinguished from premodelled objects like workbenches or robots by image processing such as the background subtraction method. The quality of such an approach massively depends on the settings of the camera network, that is the positions and orientations of the individual cameras. Of particular interest in this context is the minimization of the error of the distance using the objects modelled by the background subtraction method instead of the real objects. Here, we show how this minimization can be formulated as an abstract optimization problem. Moreover, we state various aspects on the implementation as well as reasons for the selection of a suitable optimization method, analyze the complexity of the proposed method and present a basic version used for extensive experiments.

cs.CV