arXiv subjects

Stefan Rothe

Publications and source records attributed to Stefan Rothe.

9 recordsLinked to original sources

arXiv2026

Reconfigurable generation of high-power structured light via nonlinear beam shaping

High-power structured light has a wide range of applications, from material processing and high-capacity optical communications to programmable electron beams, plasmas, and nuclear states. On-demand generation of structured light and adaptive control of beam profiles are essential for many practical applications, but are difficult to achieve at high power. Here, we demonstrate reconfigurable generation of structured light from a high-power multimode-fiber laser amplifier through full-field control of a low-power seed. An efficient nonlinear beam shaping scheme based on a local linear approximation of the complex nonlinear input--output relation is developed and realized in situ. Diverse structured beams such as Gaussian, Bessel, vector and orbital angular momentum beams are directly generated from the fiber amplifier at powers exceeding 500 W. Our scheme enables real-time programmability of structured light and is readily scalable to even higher power levels. This work provides a general framework for controlling high-dimensional nonlinear systems without accurate knowledge or tractable model.

physics.optics↗

arXiv2025

Wavefront shaping enables high-power multimode fiber amplifier with output control

Over the past two decades there have been tremendous advances in high-power fiber lasers, which have provided a powerful tool for science, engineering and defense. A major roadblock for further power scaling of single-frequency fiber laser amplifiers is stimulated Brillouin scattering. Intense efforts were devoted to mitigate this nonlinear process, but mostly limited to single-mode or few-mode fiber amplifiers which have good beam quality. Here we explore a highly multimode fiber amplifier, where stimulated Brillouin scattering is greatly suppressed due to reduction of light intensity in a large fiber core and broadening of Brillouin scattering spectrum by multimode excitation. To control the output beam profile, we apply spatial wavefront shaping technique to the input light of a nonlinear amplifier to focus the output beam to a diffraction-limited spot outside the fiber facet. Our multimode fiber amplifier can operate at high power with high efficiency and narrow linewidth which ensures high coherence. Optical wavefront shaping enables coherent control of multimode laser amplification, with potential applications in coherent beam combining, large-scale interferometry and directed energy delivery.

physics.optics↗

arXiv2024

Output beam shaping of a multimode fiber amplifier

Multimode fibers provide a promising platform for realizing high-power laser amplifiers with suppressed nonlinearities and instabilities. The potential degradation of optical beam quality has been a major concern for highly multimode fiber amplifiers. We show numerically that the beam propagation factor M2 of a single-frequency multimode fiber amplifier can be reduced to nearly unity by shaping the input or output beam profile with spatial phase-masks. Our method works for narrowband multimode fiber amplifiers with strong gain saturation, pump depletion, random mode coupling and polarization mixing. The numerical results validate our approach of utilizing highly multimode excitation to mitigate nonlinear effects in high-power fiber amplifiers and performing input wavefront shaping to control output beam profile and polarization state.

physics.optics↗

arXiv2024

Unlocking Mode Programming with Multi-Plane Light Conversion Using Computer-Generated Hologram Optimisation

Programmable optical devices provide performance enhancement and flexibility to spatial multiplexing systems enabling transmission of tributaries in high-order eigenmodes of spatially-diverse transmission media, like multimode fiber (MMF). Wavefront shaping with spatial light modulators (SLMs) facilitates scalability of the transmission media by allowing for channel diagonalization and quasi-single-input single-output operation. Programmable mode multiplexing configurations like multi-plane light conversion (MPLC) utilise the SLM and offer the potential to simultaneously launch an arbitrary subset of spatial tributaries in any N-mode MMF. Such programmable optical processor would enable the throughput of space-division multiplexing (SDM) systems to be progressively increased by addressing a growing number of tributaries over one MMF and in this way meet a growing traffic demand - similarly to the wavelength-division multiplexing evolution path. Conventionally, MPLC phasemasks are calculated using the wavefront matching algorithm (WMA). However, this method does not exploit the full potential of programmable mode multiplexers. We show, that computer-generated hologram algorithms like direct search enable significant improvement compared to the traditional WMA-approach. Such gains are enabled by tailored cost functions with dynamic constraints concerning insertion loss as well as mode extinction ratio. We show that average mode extinction ratio can be greatly improved by as much as 15 dB at the expense of insertion loss deterioration of < 3 dB. One particular feature of programmable mode multiplexers is the adaptability to optimised transmission functions. Besides conventional LP modes transmission, we employ our approach on Schmidt modes, which are spatial eigenchannels with minimum crosstalk derived from a measured transmission matrix.

physics.optics↗

arXiv2023

Securing Data in Multimode Fibers by Exploiting Mode-Dependent Light Propagation Effects

Multimode fibers hold great promise to advance data rates in optical communications but come with the challenge to compensate for modal crosstalk and mode-dependent losses, resulting in strong distortions. The holographic measurement of the transmission matrix enables not only correcting distortions but also harnessing these effects for creating a confidential data connection between legitimate communication parties, Alice and Bob. The feasibility of this physical-layer-security-based approach is demonstrated experimentally for the first time on a multimode fiber link to which the eavesdropper Eve is physically coupled. Once the proper structured light field is launched at Alice's side, the message can be delivered to Bob, and, simultaneously, the decipherment for an illegitimate wiretapper Eve is destroyed. Within a real communication scenario, we implement wiretap codes and demonstrate confidentiality by quantifying the level of secrecy. Compared to an uncoded data transmission, the amount of securely exchanged data is enhanced by a factor of 538. The complex light transportation phenomena that have long been considered limiting and have restricted the widespread use of multimode fiber are exploited for opening new perspectives on information security in spatial multiplexing communication systems.

physics.app-ph↗

arXiv2022

On a Scalable Path for Multimode MIMO-DSP

A novel MIMO-DSP for space-division multiplexing over multimode fibres is proposed. A principal modes approach is shown to provide two-fold benefits: over 13 times channel memory reduction while minimising the number of optical front-ends needed to detect a subset of the spatial domain.

eess.SP↗

arXiv2021

Achievable Physical-Layer Secrecy in Multi-Mode Fiber Channels using Artificial Noise

Reliable and secure communication is an important aspect of modern fiber optic communication. In this work we consider a multi-mode fiber (MMF) channel wiretapped by an eavesdropper. We assume the transmitter knows the legitimate channel, but statistical knowledge of the eavesdropper's channel only. We propose a transmission scheme with artificial noise (AN) for such a channel. In particular, we formulate the corresponding optimization problem which aims to maximize the average secrecy rate and develop an algorithm to solve it. We apply this algorithm to actual measured MMF channels. As real fiber measurements show, for a 55 mode MMF we can achieve positive average secrecy rates with the proper use of AN. Furthermore, the gain compared to standard precoding and power allocation schemes is illustrated.

cs.IT↗

arXiv2020

Intensity-only Mode Decomposition on Multimode Fibers using a Densely Connected Convolutional Network

The use of multimode fibers offers advantages in the field of communication technology in terms of transferable information density and information security. For applications using physical layer security or mode division multiplexing, the complex transmission matrix must be known. To measure the transmission matrix, the individual modes of the multimode fiber are excited sequentially at the input and a mode decomposition is performed at the output. Mode decomposition is usually performed using digital holography, which requires the provision of a reference wave and leads to high efforts. To overcome these drawbacks, a neural network is proposed, which performs mode decomposition with intensity-only camera recordings of the multimode fiber facet. Due to the high computational complexity of the problem, this approach was usually limited to a number of 6 modes. In this work, it could be shown for the first time that by using a DenseNet with 121 layers it is possible to break through the hurdle of 6 modes. The advancement is demonstrated by a mode decomposition with 10 modes experimentally. The training process is based on synthetic data. The proposed method is quantitatively compared to the conventional approach with digital holography. In addition, it is shown that the network can perform mode decomposition on a 55-mode fiber, which also supports modes unknown to the neural network. The smart detection using a DenseNet opens new ways for the application of multimode fibers in optical communication networks for physical layer security.

eess.IV↗

arXiv2019

Physical Layer Security in Multimode Fiber Optical Networks

Inverse precoding algorithms in multimode fiber based communication networks are used to exploit mode dependent losses on the physical layer. This provides an asymmetry between legitimate (Bob) and unlegitimate (Eve) receiver of messages resulting in a significant SNR advantage for Bob. In combination with dynamic mode channel changes, Eve has no chance to reconstruct a sent message even in a worst case scenario in which she is almighty. This is the first time, Physical Layer Security in a fiber optical network is investigated on the basis of measured transmission matrices. These results show that messages can be sent securely with conventional communication techniques. Translating the task of securing data from software to hardware represents the potential of a scientific paradigm shift. The introduced technique is a step towards the development of cyber physical systems.

cs.CR↗