SearcharxivSearch

arXiv subjects

Stefan Wabnitz

Publications and source records attributed to Stefan Wabnitz.

At least 19 recordsLinked to original sources

Spatio-temporal equilibrium thermodynamics of guided optical waves at positive and negative temperatures

Optical thermalization has been recently studied in the 2D spatial evolution of (quasi-)monochromatic light waves propagating in multimode waveguides. Here, we investigate the spatio-temporal equilibrium properties of optical waves through the analysis of the (2+1)D Bose-Einstein thermal distribution and the corresponding classical Rayleigh-Jeans approximation. Numerical simulations of the nonlinear Schrödinger equation (NLSE) demonstrate relaxation toward the spatio-temporal Rayleigh-Jeans equilibrium state, as described by the corresponding wave turbulence kinetic equation. Remarkable adiabatic cooling phenomena stemming from the high-frequency tails of the Rayleigh-Jeans distribution are discussed and the consequent limitations of the classical approximation are highlighted. To overcome these issues, we make use of a quantum version of the NLSE whose associated kinetic equation describes relaxation toward the spatio-temporal Bose-Einstein equilibrium distribution. The analysis of thermodynamic properties reveals a strong dependence on the dispersion regime. In the anomalous dispersion regime, the system relaxes to positive-temperatures equilibrium states: as the number of modes of the waveguide increases, the fundamental spatial mode becomes macroscopically populated, while its temporal spectrum undergoes significant narrowing, ultimately leading to complete (2+1)D spatio-temporal condensation in the thermodynamic limit. In the normal dispersion regime, the system evolves toward negative-temperature equilibrium states characterized by an inverted spatial modal population. In this regime, we predict a phase transition to Bose-Einstein condensation at negative temperatures, which occurs by increasing the temperature above a negative critical value. Our work opens new avenues for future research and lay the groundwork for the development of spatiotemporal optical thermodynamics.

physics.optics

Generation of High-order Laguerre-Gaussian modes in Coated and Uncoated Graded-Index and Step-Index Multimode Fibers

We report an efficient experimental method for generating high-order Laguerre-Gauss (HOLG) modes by simply coupling a Gaussian beam into the cladding of a multimode fiber (MMF). In particular, the order of the HOLG mode remains invariant with respect to input power, propagation distance, and pulse duration. Furthermore, spectral and power measurements confirm that the beam-shaping mechanism is predominantly linear, whereas Kerr nonlinearity primarily affects the longitudinal phase-matching condition and conversion efficiency, without altering the generated mode order. Altogether, these findings establish our approach as a highly robust and scalable platform for generating tailored optical beams.

physics.optics

Extreme nonlinear optics in optical fibers

This paper reviews the field of extreme nonlinear optics in optical fibers, highlighting key phenomena and advancements. It discusses multiple ionization effects caused by femtosecond laser pulses that generate plasma and induce permanent material modifications, as well as plasma luminescence and its dependence on material imperfections. The formation and dynamics of plasma filaments, including helical structures, are explored, along with the rainbow spiral emission pattern useful in communications and particle manipulation. The review covers the generation of spatial-temporal waves, supercontinuum broadening, and advanced modeling techniques, such as multimode unidirectional pulse propagation equations for describing optical pulse evolution. Experimental demonstrations involving discretized conical waves and supercontinuum generation optimization are detailed. The paper emphasizes the unique capabilities of photonic crystal fibers, especially hollow-core variants, in achieving broad supercontinua and Raman frequency combs, ultrashort pulse compression, high-harmonic generation, plasma formation, and nonclassical light production. Our outlook highlights ongoing research into spatiotemporal helicon waves, ultrashort pulse propagation, vacuum ultraviolet and mid-infrared supercontinuum generation, and innovative fiber technologies. Future directions focus on enhancing fiber performance, understanding multimodal wave dynamics, and expanding applications in telecommunications, sensing, and quantum science.

physics.optics

Multiscale X-ray computed tomography of standard optical fibers

Optical fiber technologies enable high-speed communication, medical imaging, and advanced sensing. Among the techniques for the characterization of optical fibers, Xray computed tomography has recently emerged as a versatile non-destructive tool for mapping their refractive index variations in 3D. In this study, we present a multiscale characterization of standard optical fibers. We carry out an intercomparison of three tomography setups: classical computed microtomography, X-ray microscopy, and nanotomography. In each method, our analysis highlights the trade-offs between resolution, field of view, and segmentation efficiency. Additionally, we integrate deep learning segmentation thresholding to improve the image analysis process. Thanks to its large field of view, microtomography with classical sources is ideal for the analysis of relatively long fiber spans, where a low spatial resolution is acceptable. The other way around, nanotomography has the highest spatial resolution, but it is limited to very small fiber samples, e.g., fiber tapers and nanofibers, which have diameters of the order of a few microns. Finally, X-ray microscopy provides a good compromise between the sample size fitting the device's field of view and the spatial resolution needed for properly imaging the inner features of the fiber. Specifically, thanks to its practicality in terms of costs and cumbersomeness, we foresee that the latter will provide the most suitable choice for the quality control of fiber drawing in real-time, e.g., using the "One-Minute Tomographies with Fast Acquisition Scanning Technology" developed by Zeiss. In this regard, the combination of X-ray computed tomography and artificial intelligence-driven enhancements is poised to revolutionize fiber characterization, by enabling precise monitoring and adaptive control in fiber manufacturing.

physics.app-ph

Dispersion engineered AlGaAs-on-insulator nanophotonics by distributed feedback

Technological advances in the fabrication of nanophotonic circuits have driven the scientific community to increasingly focus on the precise tailoring of their key optical properties, over a broadband spectral domain. In this context, the modulation of the local refractive index can be exploited to customize an effective reflectivity by the use of distributed Bragg mirrors, enabling the on-chip integration of Fabry-Pérot resonators. The resulting cavity length is strongly wavelength-dependent, offering practical solutions to the growing demand of dispersion engineering. Owing to their typically high core-to-cladding refractive index contrast and exceptional nonlinear properties, III-V semiconductor-based platforms represent promising candidates for the fabrication of Bragg reflectors. In this work, we propose an AlGaAs-on-insulator linear resonator based on distributed Bragg mirrors. We discuss the first experimental demonstration of a systematic, shape-constrained inverse design technique which tailors a prescribed dispersion profile, showing a strong agreement between simulations and measurements. In perspective, the proposed approach offers an efficient and general response to the challenge of dispersion engineering in integrated optical circuits.

physics.optics

Spatio-spectral light-by-light moulding in multimode fibre

Controlling complex light waves to achieve desired behaviours or characteristics on demand presents a significant challenge. This task becomes even more complicated when manipulating speckled light beams owing to their inherently fuzzy intensity and phase structures. Here, we demonstrate that a weak speckled second-harmonic signal in a multimode graded-index fibre can be manipulated via its conservative interaction with a high-power co-propagating fundamental pump wave. Specifically, the spatial quality of the signal can be either enhanced or degraded by varying the pump's power or its modal power distribution. The underlying physical mechanism is the optically induced mode conversion, whose phase-matching can be controlled by the mode power distribution of the pump beam. This phenomenon enables new possibilities for manipulating complex light via material nonlinearities in multimode guiding structures. A striking example of this novel light-by-light control is the experimentally observed enhancement or partial suppression of the visible Raman Stokes cascade regulated by the second harmonic beam, while modulated by the mode power distribution of the fundamental beam.

physics.optics

Bistable soliton optical frequency combs in a second harmonic generation Kerr cavity

We study the dynamics and stability of soliton optical frequency comb generation in a dissipative, coherently pumped cavity with both second and third-order nonlinearity. Cavity sweep simulations and linear stability analysis based on path continuation reveal the existence of bistable solitons. These families of solutions represent a continuous transition between a purely quadratic and a Kerr cavity soliton frequency comb. Perspective demonstrations of these novel optical sources is an ongoing relevant subject within the frequency comb community.

nlin.CD

Modal division multiplexing of quantum and classical signals in few-mode fibers

Mode-division multiplexing using multimode optical fibers has been intensively studied in recent years, in order to alleviate the transmission capacity crunch. Moreover, the need for secure information transmission based on quantum encryption protocols leads to investigating the possibility of multiplexing both quantum and classical signals in the same fiber. In this work, we experimentally study the modal multiplexing of both quantum and classical signals at telecom wavelengths, by using a few-mode fiber of 8 km and modal multiplexers/demultiplexers. We observe the existence of random-mode coupling at the quantum level, leading to cross-talk among both degenerate and non-degenerate channels. Our results demonstrate the feasibility of using few-mode fibers for simultaneously transmitting classical and quantum information, leading to an efficient implementation of physical information encryption protocols in spatial-division multiplexed systems.

quant-ph

Concatenation of Kerr solitary waves in Ceramic YAG: application to coherent Raman imaging

A coherent concatenation of multiple Townes solitons may lead to a stable infrared and visible broadband filament in ceramic YAG polycrystal. This self-trapped soliton train is leveraged to implement self-referenced multiplex coherent anti-Stokes Raman scattering imaging. Simulations and experiments illustrating the filamentation process and the concatenation of focusing-defocusing cycles in ceramic and crystal YAG are presented. In addition, our simulations and experiments further examine the dependence of the filamentation onset location and supercontinuum generation upon peak input power. Understanding this dependence is key for implementation of viable CARS imaging techniques, due to the comparatively exceptional ability of YAG to generate supercontinuum which can enable higher-sensitivity imaging without delay lines.

physics.optics

Sub-nanosecond all-optically reconfigurable photonics in optical fibres

We introduce a novel all-optical platform in multimode and multicore fibres. By using a low-power probe beam and a high-power counter-propagating control beam, we achieve advanced and dynamic control over light propagation within the fibres. This setup enables all-optical reconfiguration of the probe, which is achieved by solely tuning the control beam power. Key operations such as fully tuneable power splitting and mode conversion, core-to-core switching and combination, along with remote probe characterization, are demonstrated at the sub-nanosecond time scale. Our experimental results are supported by a theoretical model that extends to fibres with an arbitrary number of modes and cores. The implementation of these operations in a single platform underlines its versatility, a critical feature of next-generation photonic systems. These results represent a significant shift from existing methods that rely on electro-optical or thermo-optical modulation for tunability. They pave the way towards a fast and energy-efficient alternative through all-optical modulation, a keystone for the advancement of future reconfigurable optical networks and optical computing. Scaling these techniques to highly nonlinear materials could underpin ultrafast all-optically programmable integrated photonics.

physics.optics

Light tailored by multimode fiber for multiphoton fluorescence microscopy

We study the diffraction of a particular class of beams, composed only by a combination of azimuthally invariant guided modes of an optical fiber. We demonstrate that such beams can be obtained by injecting a Gaussian beam in a small piece of silica graded-index multimode fiber. This minimalistic low-cost method is applied for improving the axial resolution of a two-photon microscope.

physics.optics

Inter-Modal Raman Amplification in Space-division Multiplexed Systems

We theoretically analyze and experimentally demonstrate the possibility of amplifying optical signals in an unrepeatered mode-division multiplexed tranmsmission system, through inter-modal stimulated Raman scattering process between signal and pump beams coupled onto distinct modes of a few-mode graded-index optical fiber.

physics.optics

Multidimensional localized states in externally driven Kerr cavities with a parabolic spatiotemporal potential: a dimensional connection

In this work, we study the bifurcation structures and the stability of multidimensional localized states within coherently driven Kerr optical cavities with parabolic potentials in 1D, 2D, and 3D systems. Based on symmetric considerations, we transform higher-dimensional models into a single 1D model with a dimension parameter. This transformation not only yields a substantial reduction in computational complexity, but also enables an efficient examination of how dimensionality impacts the system dynamics. In the absence of nonlinearity, we analyze the eigenstates of the linear systems. This allows us to uncover a heightened concentration of the eigenmodes at the center of the potential well, while witnessing a consistent equal spacing among their eigenvalues, as the dimension parameter increases. In the presence of nonlinearity, our findings distinctly reveal that the stability of the localized states diminishes with increasing dimensionality. This study offers an approach to tackling high-dimensional problems, shedding light on the fundamental dimensional connections among radially symmetric states across different dimensions, and providing valuable tools for analysis.

physics.optics

Mode attraction, rejection and control in nonlinear multimode optics

Novel fundamental notions helping in the interpretation of the complex dynamics of nonlinear systems are essential to our understanding and ability to exploit them. In this work we predict and demonstrate experimentally a fundamental property of Kerr-nonlinear media, which we name mode rejection and takes place when two intense counter-propagating beams interact in a multimode waveguide. In stark contrast to mode attraction phenomena, mode rejection leads to the selective suppression of a spatial mode in the forward beam, which is controlled via the counter-propagating backward beam. Starting from this observation we generalise the ideas of attraction and rejection in nonlinear multimode systems of arbitrary dimension, which paves the way towards a more general idea of all-optical mode control. These ideas represent universal tools to explore novel dynamics and applications in a variety of optical and non-optical nonlinear systems. Coherent beam combination in polarization-maintaining multicore fibres is demonstrated as example.

physics.optics

Multimode resonance transition to collapsed snaking in normal dispersion Kerr resonators: Bright versus dark solitons

We study the dynamics of Kerr cavity solitons in the normal dispersion regime, in the presence of an intracavity phase modulation. The associated parabolic potential introduces multimode resonances, which promote the formation of high-order bright solitons. By gradually reducing the potential strength, bright solitons undergo a transition into dark solitons. We describe this process as a shift from a multimode resonance to a collapsed snaking bifurcation structure. This work offers a comprehensive overview of cavity dynamics and may provide a potential pathway to access multi-stable states by effectively varying the phase modulation.

physics.optics

Statistics of modal condensation in nonlinear multimode fibers

Optical pulses propagating in multimode optical fibers are affected by linear disorder and nonlinearity, and experience chaotic exchange of power among modes. On the other hand, complex systems can attain steady states characterized by energy condensation into single as well multiple sub-systems. In this work, we study beam propagation in multimode optical fibers in the presence of linear random mode coupling and Kerr nonlinearity; both effects lead to a mode power redistribution at the fiber output. We use a new 3D mode decomposition method to obtain, with unprecedented accuracy, measurements of the modal distribution from long spans of graded-index fiber; we perform numerical simulations using a new model for the linear disorder; we introduce a weighted Bose-Einstein law and show that it is suitable for describing steady-state modal power distributions both in the linear and nonlinear regimes. We show that, at power levels intermediate between the linear and the soliton regimes, energy condensation is attained locally by the second, third and fourth modal groups, before global condensation to the fundamental mode is reached in the soliton regime. Our results extend the thermodynamic approach to multimode fibers to unexplored optical states, which acquire the characteristics of optical glass.

physics.optics

Pure quartic three-dimensional spatiotemporal Kerr solitons

We analyze the formation of three-dimensional spatiotemporal solitons in waveguides with a parabolic refractive index profile and pure quartic chromatic dispersion. We show, by applying both variational approaches and full three-dimensional numerical simulations, that fourth-order dispersion has a positive impact on soliton stabilization against spatiotemporal wave collapse. Specifically, pure quartic spatiotemporal solitons remain stable within a significantly larger energy range with respect to their second-order dispersion counterparts.

nlin.PS

Nonlinear dynamics of dissipative structures in coherently-driven Kerr cavities with a parabolic potential

By means of a modified Lugiato-Lefever equation model, we investigate the nonlinear dynamics of dissipative wave structures in coherently-driven Kerr cavities with a parabolic potential. The potential stabilizes system dynamics, leading to the generation of robust dissipative solitons in the positive detuning regime, and of higher-order solitons in the negative detuning regime. In order to understand the underlying mechanisms which are responsible for these high-order states, we decompose the field on the basis of linear eigenmodes of the system. This permits to investigate the resulting nonlinear mode coupling processes. By increasing the external pumping, one observes the emergence of high-order breathers and chaoticons. Our modal content analysis reveals that breathers are dominated by modes of corresponding orders, while chaoticons exhibit proper chaotic dynamics. We characterize the evolution of dissipative structures by using bifurcation diagrams, and confirm their stability by combining linear stability analysis results with numerical simulations. Finally, we draw phase diagrams that summarize the complex dynamics landscape, obtained when varying the pump, the detuning, and the strength of the potential.

physics.optics