arXiv subjects

Stefano Curtarolo

Publications and source records attributed to Stefano Curtarolo.

At least 109 records · Page 6Linked to original sources

arXiv2014

Low thermal conductivity and triaxial phononic anisotropy of SnSe

In this theoretical study, we investigate the origins of the very low thermal conductivity of tin selenide (SnSe) using ab-initio calculations. We obtained high-temperature lattice thermal conductivity values that are close to those of amorphous compounds. We also found a strong anisotropy between the three crystallographic axes: one of the in-plane directions conducts heat much more easily than the other. Our results are compatible with most of the experimental literature on SnSe, and differ markedly from the more isotropic values reported by a recent study.

cond-mat.mtrl-sci↗

arXiv2014

A RESTful API for exchanging Materials Data in the AFLOWLIB.org consortium

The continued advancement of science depends on shared and reproducible data. In the field of computational materials science and rational materials design this entails the construction of large open databases of materials properties. To this end, an Application Program Interface (API) following REST principles is introduced for the AFLOWLIB.org materials data repositories consortium. AUIDs (Aflowlib Unique IDentifier) and AURLs (Aflowlib Uniform Resource locator) are assigned to the database resources according to a well-defined protocol described herein, which enables the client to access, through appropriate queries, the desired data for post-processing. This introduces a new level of openness into the AFLOWLIB repository, allowing the community to construct high-level work-flows and tools exploiting its rich data set of calculated structural, thermodynamic, and electronic properties. Furthermore, federating these tools would open the door to collaborative investigation of the data by an unprecedented extended community of users to accelerate the advancement of computational materials design and development.

cond-mat.mtrl-sci↗

arXiv2014

Finding the stable structures of W$_x$N$_1$$_-$$_x$ with an $ab$$-$$initio$ high-throughput approach

Using density functional theory calculations, many researchers have predicted that various tungsten-nitride compounds WN$_x$ ($x$ > 1) will be "ultra-compressible" or "superhard", $i.e.$ as hard as or harder than diamond. These compounds are predicted to have large bulk and shear moduli (> 200 GPa) and to be elastically and vibrationally stable. Compounds with such desirable properties must be energetically stable against decomposition into other compounds. This stability can only be found after the determination of the convex hull for W$_x$N$_1$$_-$$_x$ lines which connect the lowest enthalpy structures as a function of composition. The phase diagram of the W-N structure is uncertain, both experimentally and computationally. Complex van der Waals forces play a significant role in determining the structure of solid N$_2$. Here we use high-throughput calculations to map out the convex hull and other low energy structures for the W-N system. We find that the ground state of the system is the NbO structure, and that the WN$_2$ structures found by Wang $et$ $al$. are also stable when the van der Waals forces are neglected. Other proposed structures are above the convex hull of the W-N system. We show how the choice of density functional influences the shape of the curve and the structures that form the hull. In nitrogen-rich compounds, the choice of functional can dramatically change the structural parameters and mechanical behavior. Using any of the functionals, the bulk and shear moduli of the NbO phase are comparable to the WN$_x$ compounds that have been claimed to be ultra-compressible for superhard.

cond-mat.mtrl-sci↗

arXiv2014

A high-throughput ab initio review of platinum-group alloy systems

We report a comprehensive study of the binary systems of the platinum group metals with the transition metals, using high-throughput first-principles calculations. These computations predict stability of new compounds in 38 binary systems where no compounds have been reported in the literature experimentally, and a few dozen of as yet unreported compounds in additional systems. Our calculations also identify stable structures at compound compositions that have been previously reported without detailed structural data and indicate that some experimentally reported compounds may actually be unstable at low temperatures. With these results we construct enhanced structure maps for the binary alloys of platinum group metals. These are much more complete, systematic and predictive than those based on empirical results alone.

cond-mat.mtrl-sci↗

arXiv2014

Finding unprecedentedly low-thermal-conductivity half-Heusler semiconductors via high-throughput materials modeling

The lattice thermal conductivity (κω) is a key property for many potential applications of compounds. Discovery of materials with very low or high κω remains an experimental challenge due to high costs and time-consuming synthesis procedures. High-throughput computational pre-screening is a valuable approach for significantly reducing the set of candidate compounds. In this article, we introduce efficient methods for reliably estimating the bulk κω for a large number of compounds. The algorithms are based on a combination of machine-learning algorithms, physical insights, and automatic ab-initio calculations. We scanned approximately 79,000 half-Heusler entries in the AFLOWLIB.org database. Among the 450 mechanically stable ordered semiconductors identified, we find that κω spans more than two orders of magnitude- a much larger range than that previously thought. κω is lowest for compounds whose elements in equivalent positions have large atomic radii. We then perform a thorough screening of thermodynamical stability that allows to reduce the list to 77 systems. We can then provide a quantitative estimate of κω for this selected range of systems. Three semiconductors having κω < 5 W /(m K) are proposed for further experimental study.

cond-mat.mtrl-sci↗

arXiv2014

Pressure effects on the superconducting critical temperature of Li2B2

We present the structural, electronic and superconducting properties of Li2B2 under pressure within the framework of the density functional theory. The structural parameters, electronic band structure, phonon frequency of the E2g phonon mode and superconducting critical temperature Tc were calculated for pressures up to 20 GPa. We predicted that the superconducting critical temperature of Li2B2 is about 11 K and this decreases as pressure increases. We found that even though the lattice dynamics of the E2g phonon mode is similar to MgB2, the reduction of the σ-band density of states at Fermi level and the raising of the E2g phonon frequency with pressure were determinant to decrease λ and consequently Tc.

cond-mat.supr-con↗

arXiv2013

Effective and accurate representation of extended Bloch states on finite Hilbert spaces

We present a straightforward, noniterative projection scheme that can represent the electronic ground state of a periodic system on a finite atomic-orbital-like basis, up to a predictable number of electronic states and with controllable accuracy. By co-filtering the projections of plane-wave Bloch states with high-kinetic-energy components, the richness of the finite space and thus the number of exactly-reproduced bands can be selectively increased at a negligible computational cost, an essential requirement for the design of efficient algorithms for electronic structure simulations of realistic material systems and massive high-throughput investigations.

cond-mat.mes-hall↗

arXiv2013

AFLOW: An automatic framework for high-throughput materials discovery

Recent advances in computational materials science present novel opportunities for structure discovery and optimization, including uncovering of unsuspected compounds and metastable structures, electronic structure, surface, and nano-particle properties. The practical realization of these opportunities requires systematic generation and classification of the relevant computational data by high-throughput methods. In this paper we present Aflow (Automatic Flow), a software framework for high-throughput calculation of crystal structure properties of alloys, intermetallics and inorganic compounds. The Aflow software is available for the scientific community on the website of the materials research consortium, aflowlib.org. Its geometric and electronic structure analysis and manipulation tools are additionally available for online operation at the same website. The combination of automatic methods and user online interfaces provide a powerful tool for efficient quantum computational materials discovery and characterization.

cond-mat.mtrl-sci↗

arXiv2013

Stable ordered structures of binary technetium alloys from first principles

Technetium, element 43, is the only radioactive transition metal. It occurs naturally on earth in only trace amounts. Experimental investigation of its possible compounds is thus inherently difficult and limited. Half of the Tc-transition-metal systems (14 out of 28) are reported to be phase separating or lack experimental data. Using high-throughput first-principles calculations, we present a comprehensive investigation of the binary alloys of technetium with the transition metals. The calculations predict stable, ordered structures in nine of these 14 binary systems. They also predict additional compounds in all nine known compound-forming systems and in two of the five systems reported with disordered \c{hi} or σ phases. These results accentuate the incompleteness of the current knowledge of technetium alloys and should guide experimental studies to obtain accurate structural information on potential compounds, obviating some of the difficulties associated with such work.

cond-mat.mtrl-sci↗

arXiv2010

Density Functional Study of the L1_0 - alpha-IrV Transition in IrV and RhV

Both IrV and RhV crystallize in the alpha-IrV structure, with a transition to the higher symmetry L1_0 structure at high temperature, or with the addition of excess Ir or Rh. Here we present evidence that this transition is driven by the lowering of the electronic density of states at the Fermi level of the alpha-IrV structure. The transition has long been thought to be second order, with a simple doubling of the L1_0 unit cell due to an unstable phonon at the R point (0 1/2 1/2). We use first-principles calculations to show that all phonons at the R point are, in fact, stable, but do find a region of reciprocal space where the L1_0 structure has unstable (imaginary frequency) phonons. We use the frozen phonon method to examine two of these modes, relaxing the structures associated with the unstable phonon modes to obtain new structures which are lower in energy than L1_0 but still above alpha-IrV. We examine the phonon spectra of these structures as well, looking for instabilities, and find further instabilities, and more relaxed structures, all of which have energies above the alpha-IrV phase. In addition, we find that all of the relaxed structures, stable and unstable, have a density comparable to the L1_0 phase (and less than the alpha-IrV phase), so that any transition from one of these structures to the ground state will have a volume change as well as an energy discontinuity. We conclude that the transition from L1_0 to alpha-IrV is probably weakly first order.

cond-mat.mtrl-sci↗

arXiv2010

High-throughput electronic band structure calculations: challenges and tools

The article is devoted to the discussion of the high-throughput approach to band structures calculations. We present scientific and computational challenges as well as solutions relying on the developed framework (Automatic Flow, AFLOW/ACONVASP). The key factors of the method are the standardization and the robustness of the procedures. Two scenarios are relevant: 1) independent users generating databases in their own computational systems (off-line approach) and 2) teamed users sharing computational information based on a common ground (on-line approach). Both cases are integrated in the framework: for off-line approaches, the standardization is automatic and fully integrated for the 14 Bravais lattices, the primitive and conventional unit cells, and the coordinates of the high symmetry k-path in the Brillouin zones. For on-line tasks, the framework offers an expandable web interface where the user can prepare and set up calculations following the proposed standard. Few examples of band structures are included. LSDA+U parameters (U, J) are also presented for Nd, Sm, and Eu.

cond-mat.mtrl-sci↗

arXiv2010

Structure maps for hcp metals from first principles calculations

The ability to predict the existence and crystal type of ordered structures of materials from their components is a major challenge of current materials research. Empirical methods use experimental data to construct structure maps and make predictions based on clustering of simple physical parameters. Their usefulness depends on the availability of reliable data over the entire parameter space. Recent development of high throughput methods opens the possibility to enhance these empirical structure maps by {\it ab initio} calculations in regions of the parameter space where the experimental evidence is lacking or not well characterized. In this paper we construct enhanced maps for the binary alloys of hcp metals, where the experimental data leaves large regions of poorly characterized systems believed to be phase-separating. In these enhanced maps, the clusters of non-compound forming systems are much smaller than indicated by the empirical results alone.

cond-mat.mtrl-sci↗

arXiv2009

Hafnium binary alloys from experiments and first principles

Despite the increasing importance of hafnium in numerous technological applications, experimental and computational data on its binary alloys is sparse. In particular, data is scant on those binary systems believed to be phase separating. We performed a comprehensive study of 44 hafnium binary systems with alkali metals, alkaline earths, transition metals and metals, using high-throughput first principles calculations. These computations predict novel unsuspected compounds in six binary systems previously believed to be phase separating They also predict a few unreported compounds in additional systems and indicate that some reported compounds may actually be unstable at low temperatures. We report the results for the following systems: AgHf, AlHf, AuHf, BaHf*, BeHf, BiHf, CaHf*, CdHf, CoHf, CrHf, CuHf, FeHf, GaHf, HfHg, HfIn, HfIr, HfK*, HfLa*, HfLi*, HfMg, HfMn, HfMo, HfNa*, HfNb*, HfNi, HfOs, HfPb, HfPd, HfPt, HfRe, HfRh, HfRu, HfSc, HfSn, HfSr*, HfTa*, HfTc, HfTi, HfTl, HfV*, HfW, HfY*, HfZn, and HfZr. (* = systems in which the ab initio method predicts that no compounds are stable).

cond-mat.mtrl-sci↗

arXiv2009

Comparative Study of Nonproportionality and Electronic Band Structures Features in Scintillator Materials

The origin of nonproportionality in scintillator materials has been a long standing problem for more than four decades. In this manuscript, we show that, with the help of first principle modeling, the parameterization of the nonproportionality for several systems, with respect to their band structure curvature suggests a correlation between carrier effective mass and energy response. We attribute this correlation to the case where free electrons and holes are the major energy carriers. Excitonic scintillators do not show such a definitive trend. This model suggests a potential high-throughput approach for discovering novel proportional scintillators in the former class of materials.

cond-mat.mtrl-sci↗

arXiv2009

Surface segregation in nanoparticles from first principles

FePt nanoparticles are known to exhibit reduced L1$_0$ order with decreasing particle size. The reduction in order reduces the magnetic anisotropy and the thermal stability of the direction of magnetization of the particle. The phenomenon is addressed by investigating the thermodynamic driving forces for surface segregation using a local (inhomogeneous) cluster expansion fitted to ab initio data which accurately represents interatomic interactions in both the bulk and surface regions. Subsequent Monte Carlo simulations reveal that first surface layer Pt segregation is compensated by Pt depletion in the second subsurface layer. This indicates that the core's ordered state is not affected by surface thermodynamics as much as previously thought. Thus, the weak ordering experimentally observed is likely not due to fundamental thermodynamic limitations but rather to kinetic effects.

cond-mat.mes-hall↗

arXiv2009

First-principle solubilities of alkali and alkaline earth metals in Mg-B alloys

By devising a novel framework, we present a comprehensive theoretical study of solubilities of alkali (Li, Na, K, Rb, Cs) and alkaline earth (Be, Ca, Sr, Ba) metals in the he boron-rich Mg-B system. The study is based on first-principle calculations of solutes formation energies in MgB$_2$, MgB$_4$, MgB$_7$ alloys and subsequent statistical-thermodynamical evaluation of solubilities. The advantage of the approach consists in considering all the known phase boundaries in the ternary phase diagram. Substitutional Na, Ca, and Li demonstrate the largest solubilities, and Na has the highest (0.5-1 % in MgB$_7$ at $T=650-1000$ K). All the considered interstitials have negligible solubilities. The solubility of Be in MgB$_7$ can not be determined because the corresponding low-solubility formation energy is negative indicating the existence of an unknown ternary ground state. We have performed a high-throughput search of ground states in binary Mg-B, Mg-$A$, and B-$A$ systems, and we construct the ternary phase diagrams of Mg-B-$A$ alloys based on the stable binary phases. Despite its high temperature observations, we find that Sr$_{9}$Mg$_{38}$ is not a low-temperature equilibrium structure. We also determine two new possible ground states CaB$_{4}$ and RbB$_{4}$, not yet observed experimentally.

cond-mat.mtrl-sci↗

arXiv2009

Calculation of solubility in titanium alloys from first-principles

We present an approach to calculate the atomic bulk solubility in binary alloys based on the statistical-thermodynamic theory of dilute lattice gas. The model considers all the appropriate ground states of the alloy and results in a simple Arrhenius-type temperature dependence determined by a {\it "low-solubility formation enthalpy"}. This quantity, directly obtainable from first-principle calculations, is defined as the composition derivative of the compound formation enthalpy with respect to nearby ground states. We apply the framework and calculate the solubility of the A specie in A-Ti alloys (A=Ag,Au,Cd,Co,Cr,Ir,W,Zn). In addition to determining unknown low-temperature ground states for the eight alloys, we find qualitative agreements with solubility experimental results. The presented formalism, correct in the low-solubility limit, should be considered as an appropriate starting point for determining if more computationally expensive formalisms are otherwise needed.

cond-mat.mtrl-sci↗

arXiv2008

Structures and topological transitions of hydrocarbon films on quasicrystalline surfaces

Lubricants can affect quasicrystalline coatings surfaces by modifying commensurability of the interfaces. We report results of the first computer simulation studies of physically adsorbed hydrocarbons on a quasicrystalline surface: methane, propane, and benzene on decagonal Al-Ni-Co. The grand canonical Monte Carlo method is employed, using novel Embedded Atom Method potentials generated from it ab initio calculations, and standard hydrocarbon interactions. The resulting adsorption isotherms and calculated structures show the films' evolution from submonolayer to condensation. We discover the presence and absence of the 5- to 6-fold topological transition, for benzene and methane, respectively, in agreement with a previsouly formulated phenomenological rule based on adsorbate-substrate size mismatch.

cond-mat.mtrl-sci↗