arXiv subjects

Stefano Minardi

Publications and source records attributed to Stefano Minardi.

At least 19 recordsLinked to original sources

arXiv2023

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.

astro-ph.IM↗

arXiv2019

Modal analysis using photonic lanterns coupled to arrays of waveguides

We present a new concept of an integrated optics component capable of measuring the complex amplitudes of the modes at the tip of a multimode waveguide. The device uses a photonic lantern to split the optical power carried by an $N$-modes waveguide among a collection of single-mode waveguides that excite a periodic array of at least $N^2$ single-mode evanescently-coupled waveguides. The power detected at each output of the array is a linear combination of the products of the modal amplitudes-a relation that can, under suitable conditions, be inverted allowing the derivation of the amplitudes and relative phases of the modal mixture at the input. The expected performance of the device is discussed and its application to the real-time measurement of modal instability in high power fiber lasers is proposed.

physics.optics↗

arXiv2018

A six-apertures discrete beam combiners for J-band interferometry

The astronomical J-band (1.25 micrometres) is a relatively untapped wave-band in long-baseline infrared interferometry. It allows access to the photosphere in giant and super-giant stars relatively free from opacities of molecular bands. The J-band can potentially be used for imaging spots in the 1350 nm ionised iron line on slowly rotating magnetically-active stars through spectro-interferometry. In addition, the access to the 1080 nanometres He I line may probe outflows and funnel-flows in T-Tauri stars and allow the study of the star-disk interaction. We present the progress in the development of a six-inputs, J-band interferometric beam combiner based on the discrete beam combiner (DBC) concept. DBCs are periodic arrays of evanescent coupled waveguides which can be used to retrieve simultaneously the complex visibility of every baseline from a multi-aperture interferometer. Existing, planned or future interferometric facilities combine or will combine six or more telescopes at the time, thus increasing the snapshot uv coverage from the interferometric measurements. A better uv coverage will consequently enhance the accuracy of the image reconstruction. The component we are currently developing is manufactured in borosilicate glass using the technique of multi-pass ultrafast laser inscription (ULI), using a mode-locked Yb:KYW laser at the wavelength of 1030 nm, pulse duration of 300 fs and repetition rate of 1 MHz. After annealing, the written components showed a propagation loss less than 0.3 dB/cm and a negligible birefringence at a wavelength of 1310 nm, which makes the components suitable for un-polarized light operation. A single mode fiber-to-component insertion loss of 0.9 dB was measured. Work is currently in progress to characterize the components in spectro-interferometric mode with white light covering the J-band spectrum.

astro-ph.IM↗

arXiv2018

The Planet Formation Imager

The Planet Formation Imager (PFI, www.planetformationimager.org) is a next-generation infrared interferometer array with the primary goal of imaging the active phases of planet formation in nearby star forming regions. PFI will be sensitive to warm dust emission using mid-infrared capabilities made possible by precise fringe tracking in the near-infrared. An L/M band combiner will be especially sensitive to thermal emission from young exoplanets (and their disks) with a high spectral resolution mode to probe the kinematics of CO and H2O gas. In this paper, we give an overview of the main science goals of PFI, define a baseline PFI architecture that can achieve those goals, point at remaining technical challenges, and suggest activities today that will help make the Planet Formation Imager facility a reality.

astro-ph.IM↗

arXiv2018

NAIR: Novel Astronomical Instrumentation through photonic Reformatting

The project "Novel Astronomical Instrumentation through photonic Reformatting" is a DFG-funded collaboration to exploit the recognized potential of photonics solutions for a radically new approach to astronomical instrumentation for optical/infrared high precision spectroscopy and high angular resolution imaging. We present a project overview and initial development results from our Adaptive Optics-photonic test bed, Ultrafast Laser Inscribed waveguides for interferometric beam combination and 3D printing structures for astronomical instrumentation. The project is expected to lead to important technological breakthroughs facilitating uniquely functionality and technical solutions for the next generation of instrumentation.

astro-ph.IM↗

arXiv2017

Integrated optics prototype beam combiner for long baseline interferometry in the L and M bands

In the last few years, integrated optics (IO) beam combiners have facilitated the emergence of 4-telescope interferometers such as PIONIER or GRAVITY, boosting the imaging capabilities of the VLTI. However, the spectral range beyond 2.2microns is not ideally covered by the conventional silica based IO. Here, we propose to consider new laser-written IO prototypes made of GLS glasses, a material that permits access to the mid-infrared spectral regime. Our goal is to conduct a full characterization of our mid-IR IO 2-telescope coupler in order to measure the performance levels directly relevant for long-baseline interferometry. We focus in particular on the exploitation of the L and M astronomical bands. We use a dedicated Michelson-interferometer setup to perform Fourier Transform spectroscopy on the coupler and measure its broadband interferometric performance. We also analyze the polarization properties of the coupler, the differential dispersion and phase degradation as well as the modal behavior and the total throughput. We measure broadband interferometric contrasts of 94.9% and 92.1% for unpolarized light in the L and M bands. Spectrally integrated splitting ratios are close to 50% but show chromatic dependence over the considered bandwidths. Additionally, the phase variation due to the combiner is measured and does not exceed 0.04rad and 0.07rad across the band L and M band, respectively. The total throughput of the coupler including Fresnel and injection losses from free-space is 25.4%. The laser-written IO GLS prototype combiners prove to be a reliable technological solution with promising performance for mid-infrared long-baseline interferometry. In the next steps, we will consider more advanced optical functions as well as a fiber-fed input and revise the optical design parameters in order the further enhance the total throughput and achromatic behavior.

astro-ph.IM↗

arXiv2016

Beam combination schemes and technologies for the Planet Formation Imager (PFI)

The Planet Formation Imager (PFI) initiative aims at developing the next generation large scale facility for imaging astronomical optical interferometry operating in the mid-infrared. Here we report on the progress of the Planet Formation Imager Technical Working Group on the beam-combination instruments. We will discuss various available options for the science and fringe-tracker beam combination instruments, ranging from direct imaging, to non-redundant fiber arrays, to integrated optics solutions. Besides considering basic characteristics of the schemes, we will investigate the maturity of the available technological platforms at near- and mid-infrared wavelengths.

astro-ph.IM↗

arXiv2016

Architecture design study and technology roadmap for the Planet Formation Imager (PFI)

The Planet Formation Imager (PFI) Project has formed a Technical Working Group (TWG) to explore possible facility architectures to meet the primary PFI science goal of imaging planet formation in situ in nearby star- forming regions. The goals of being sensitive to dust emission on solar system scales and resolving the Hill-sphere around forming giant planets can best be accomplished through sub-milliarcsecond imaging in the thermal infrared. Exploiting the 8-13 micron atmospheric window, a ground-based long-baseline interferometer with approximately 20 apertures including 10km baselines will have the necessary resolution to image structure down 0.1 milliarcseconds (0.014 AU) for T Tauri disks in Taurus. Even with large telescopes, this array will not have the sensitivity to directly track fringes in the mid-infrared for our prime targets and a fringe tracking system will be necessary in the near-infrared. While a heterodyne architecture using modern mid-IR laser comb technology remains a competitive option (especially for the intriguing 24 and 40μm atmospheric windows), the prioritization of 3-5μm observations of CO/H2O vibrotational levels by the PFI-Science Working Group (SWG) pushes the TWG to require vacuum pipe beam transport with potentially cooled optics. We present here a preliminary study of simulated L- and N-band PFI observations of a realistic 4-planet disk simulation, finding 21x2.5m PFI can easily detect the accreting protoplanets in both L and N-band but can see non-accreting planets only in L band. (abridged -- see PDF for full abstract)

astro-ph.IM↗

arXiv2016

Status of the Planet Formation Imager (PFI) concept

The Planet Formation Imager (PFI) project aims to image the period of planet assembly directly, resolving structures as small as a giant planet's Hill sphere. These images will be required in order to determine the key mechanisms for planet formation at the time when processes of grain growth, protoplanet assembly, magnetic fields, disk/planet dynamical interactions and complex radiative transfer all interact - making some planetary systems habitable and others inhospitable. We will present the overall vision for the PFI concept, focusing on the key technologies and requirements that are needed to achieve the science goals. Based on these key requirements, we will define a cost envelope range for the design and highlight where the largest uncertainties lie at this conceptual stage.

astro-ph.IM↗

arXiv2016

Astronomical photonics in the context of infrared interferometry and high-resolution spectroscopy

We review the potential of Astrophotonics, a relatively young field at the interface between photonics and astronomical instrumentation, for spectro-interferometry. We review some fundamental aspects of photonic science that drove the emer- gence of astrophotonics, and highlight the achievements in observational astrophysics. We analyze the prospects for further technological development also considering the potential synergies with other fields of physics (e.g. non-linear optics in condensed matter physics). We also stress the central role of fiber optics in routing and transporting light, delivering complex filters, or interfacing instruments and telescopes, more specifically in the context of a growing usage of adaptive optics.

astro-ph.IM↗

arXiv2014

Energy deposition dynamics of femtosecond pulses in water

We exploit inverse Raman scattering and solvated electron absorption to perform a quantitative characterization of the energy loss and ionization dynamics in water with tightly focused near-infrared femtosecond pulses. A comparison between experimental data and numerical simulations suggests that the ionization energy of water is 8 eV, rather than the commonly used value of 6.5 eV. We also introduce an equation for the Raman gain valid for ultra-short pulses that validates our experimental procedure.

physics.optics↗

arXiv2014

A broadband scalar optical vortex coronagraph

In recent years, new coronagraphic schemes have been proposed, the most promising being the optical vortex phase mask coronagraphs. In our work, a new scheme of broadband optical scalar vortex coronagraph is proposed and characterized experimentally in the laboratory. Our setup employs a pair of computer generated phase gratings (one of them containing a singularity) to control the chromatic dispersion of phase plates and achieves a constant peak-to-peak attenuation below 1:1000 over a bandwidth of 120 nm centered at 700 nm. An inner working angle of $λ$/D is demonstrated along with a raw contrast of 11.5\,magnitudes at 2$λ$/D. A more compact setup achieves a peak-to-peak attenuation below 1:1000 over a bandwidth of 60 nm with the other results remaining the same.

astro-ph.IM↗

arXiv2014

Integrated optics interferometric four telescopes nuller

Nulling interferometry has been identified as a competitive technique for the detection of extrasolar planets. The technique consists in combining out-of-phase pairs of telescopes to null effectively the light of a bright star an reveal the dim glow of the companion. We have manufactured and tested with monochromatic light an integrated optics component which combines a linear array of 4 telescopes in the nulling mode envisaged by Angel & Wolf (1997). Our testbench simulates the motion of a star in the sky. The tests have demonstrated a nulling scaling as the fourth power of the baseline delay.

astro-ph.IM↗

arXiv2014

3D-integrated beam combiner for optical spectro-interferometry

We present a compact setup based on a three-dimensional integrated optical component, allowing the mea- surement of spectrally resolved complex-visibilities for three channels of polychromatic light. We have tested a prototype of the component in R band and showed that accurate complex visibilities could be retrieved over a bandwidth of 50 nm centered at 650 nm (resolution: R=130). Closure phase stability in the order of $λ$/60 was achieved implying that the device could be used for spectro-interferometry imaging.

astro-ph.IM↗

arXiv2012

Higher-order Kerr effect and harmonic cascading in gases

The higher-order Kerr effect (HOKE) has been recently advocated to explain measurements of the saturation of the nonlinear refractive index in gases. Here we show that cascaded third-harmonic generation results in an effective fifth order nonlinearity that is negative and significant. Higher-order harmonic cascading will also occur from the HOKE, and the cascading contributions may significantly modify the observed nonlinear index change. At lower wavelengths cascading increases the HOKE saturation intensity, while for longer wavelengths cascading will decrease the HOKE saturation intensity.

physics.optics↗

arXiv2012

Photonic lattices for astronomical interferometry

Regular two-dimensional lattices of evanescently coupled waveguides may provide in the near future photonic components capable of combining interferometrically and simultaneously a large number of telescopes, thus easing the imaging capabilities of optical interferometers. In this paper, the theoretical modeling of the so-called Discrete Beam Combiners (DBC) is described and compared to the conventional model used for photonic beam combiners for astronomical interferometry. The performance of DBCs as compared to an ideal ABCD beam combiner is discussed and applications to astronomical instrumentation analyzed.

astro-ph.IM↗

arXiv2011

High precision astrometry mission for the detection and characterization of nearby habitable planetary systems with the Nearby Earth Astrometric Telescope (NEAT)

(abridged) A complete census of planetary systems around a volume-limited sample of solar-type stars (FGK dwarfs) in the Solar neighborhood with uniform sensitivity down to Earth-mass planets within their Habitable Zones out to several AUs would be a major milestone in extrasolar planets astrophysics. This fundamental goal can be achieved with a mission concept such as NEAT - the Nearby Earth Astrometric Telescope. NEAT is designed to carry out space-borne extremely-high-precision astrometric measurements sufficient to detect dynamical effects due to orbiting planets of mass even lower than Earth's around the nearest stars. Such a survey mission would provide the actual planetary masses and the full orbital geometry for all the components of the detected planetary systems down to the Earth-mass limit. The NEAT performance limits can be achieved by carrying out differential astrometry between the targets and a set of suitable reference stars in the field. The NEAT instrument design consists of an off-axis parabola single-mirror telescope, a detector with a large field of view made of small movable CCDs located around a fixed central CCD, and an interferometric calibration system originating from metrology fibers located at the primary mirror. The proposed mission architecture relies on the use of two satellites operating at L2 for 5 years, flying in formation and offering a capability of more than 20,000 reconfigurations (alternative option uses deployable boom). The NEAT primary science program will encompass an astrometric survey of our 200 closest F-, G- and K-type stellar neighbors, with an average of 50 visits. The remaining time might be allocated to improve the characterization of the architecture of selected planetary systems around nearby targets of specific interest (low-mass stars, young stars, etc.) discovered by Gaia, ground-based high-precision radial-velocity surveys.

astro-ph.EP↗

arXiv2011

Three-Dimensional Light Bullets in Arrays of Waveguides

We report the first experimental observation of 3D-LBs, excited by femtosecond pulses in a system featuring quasi-instantaneous cubic nonlinearity and a periodic, transversally-modulated refractive index. Stringent evidence of the excitation of LBs is based on time-gated images and spectra which perfectly match our numerical simulations. Furthermore, we reveal a novel evolution mechanism forcing the LBs to follow varying dispersion/diffraction conditions, until they leave their existence range and decay.

physics.optics↗