arXiv subjects

Stefano Poletto

Publications and source records attributed to Stefano Poletto.

16 recordsLinked to original sources

arXiv2026

Scaling Alternating-Bias-Assisted Annealing for Precision Transmon Frequency Targeting on Superconducting Quantum Processors

Recent advances in the alternating-bias-assisted annealing (ABAA) technique have successfully mitigated intrinsic Josephson-junction (JJ) fabrication variations. This new technique enables precision qubit frequency tuning alongside simplicity. However, it is critical to enhance tuning throughput and yield while investigating the factors that drive targeting performance as the technology scales. Here, we characterize ABAA tuning performance within a 150-mm wafer process flow and extend this technique to simultaneous, multi-channel tuning, demonstrating that a wafer-scale JJ resistance tuning precision of $\sigma=0.50\pm0.05\%$ alongside a component-level yield of $\ge 98.8\%$ can be achieved. Furthermore, we demonstrate a strong correlation between yield, tuning speed, and junction breakdown voltage, establishing the latter as a vital process control parameter for meeting production goals. Finally, we demonstrate a successful implementation of ABAA tuning on a quad-module quantum processor (Rigetti Cepheus-1-36Q), where we achieve an empirical frequency targeting precision of $\sigma \sim 30\text{ MHz}$ in both qubit and qubit-qubit detuning frequencies, contributing to high median two-qubit gate fidelities. These results confirm the efficacy and scalability of ABAA for high-precision Hamiltonian targeting, a critical enabler for modular superconducting quantum processor technology.

quant-ph↗

arXiv2026

Unlocking a fast adiabatic CZ gate and exact residual $ZZ$ cancellation between fixed-frequency transmons using a floating tunable coupler

Tunable couplers in superconducting qubit architectures enable strong qubit-qubit interactions for two-qubit gates while suppressing unwanted coupling during single-qubit operations. However, achieving low error rates for fast two-qubit gates remains challenging, as suppressing leakage and non-adiabatic errors typically requires specialized qubit, coupler, or pulse designs, often at the expense of an idling $ZZ=0$ condition. In this work, we demonstrate that a symmetric floating tunable coupler provides a natural platform for fast, high-fidelity adiabatic controlled-Z (CZ) gates. Its favorable energy-level structure eliminates the conventional trade-off between rapid conditional-phase accumulation and adiabatic evolution while preserving exact cancellation of residual $ZZ$ interaction at idling. This architecture exhibits intrinsic robustness to non-adiabatic transitions, even under simple flux modulation waveforms. To push performance at short gate durations, where maintaining adiabaticity becomes more challenging despite the favorable level structure, we introduce pulse-shaping techniques based on the instantaneous adiabatic factor that further suppress non-adiabatic errors. We experimentally realize a 24 ns adiabatic CZ gate with fidelity exceeding 99.9% and stable operation over several hours.

quant-ph↗

arXiv2024

Demonstrating real-time and low-latency quantum error correction with superconducting qubits

Quantum error correction (QEC) will be essential to achieve the accuracy needed for quantum computers to realise their full potential. The field has seen promising progress with demonstrations of early QEC and real-time decoded experiments. As quantum computers advance towards demonstrating a universal fault-tolerant logical gate set, implementing scalable and low-latency real-time decoding will be crucial to prevent the backlog problem, avoiding an exponential slowdown and maintaining a fast logical clock rate. Here, we demonstrate low-latency feedback with a scalable FPGA decoder integrated into the control system of a superconducting quantum processor. We perform an 8-qubit stability experiment with up to $25$ decoding rounds and a mean decoding time per round below $1$ ${\mu}s$, showing that we avoid the backlog problem even on superconducting hardware with the strictest speed requirements. We observe logical error suppression as the number of decoding rounds is increased. We also implement and time a fast-feedback experiment demonstrating a decoding response time of $9.6$ ${\mu}s$ for a total of $9$ measurement rounds. The decoder throughput and latency developed in this work, combined with continued device improvements, unlock the next generation of experiments that go beyond purely keeping logical qubits alive and into demonstrating building blocks of fault-tolerant computation, such as lattice surgery and magic state teleportation.

quant-ph↗

arXiv2024

Precision frequency tuning of tunable transmon qubits using alternating-bias assisted annealing

Superconducting quantum processors are one of the leading platforms for realizing scalable fault-tolerant quantum computation (FTQC). The recent demonstration of post-fabrication tuning of Josephson junctions using alternating-bias assisted annealing (ABAA) technique and a reduction in junction loss after ABAA illuminates a promising path towards precision tuning of qubit frequency while maintaining high coherence. Here, we demonstrate precision tuning of the maximum $|0\rangle\rightarrow |1\rangle$ transition frequency ($f_{01}^{\rm max}$) of tunable transmon qubits by performing ABAA at room temperature using commercially available test equipment. We characterize the impact of junction relaxation and aging on resistance spread after tuning, and demonstrate a frequency equivalent tuning precision of 7.7 MHz ($0.17\%$) based on targeted resistance tuning on hundreds of qubits, with a resistance tuning range up to $18.5\%$. Cryogenic measurements on tuned and untuned qubits show evidence of improved coherence after ABAA with no significant impact on tunability. Despite a small global offset, we show an empirical $f_{01}^{\rm max}$ tuning precision of 18.4 MHz by tuning a set of multi-qubit processors targeting their designed Hamiltonians. We experimentally characterize high-fidelity parametric resonance iSWAP gates on two ABAA-tuned 9-qubit processors with fidelity as high as $99.51\pm 0.20\%$. On the best-performing device, we measured across the device a median fidelity of $99.22\%$ and an average fidelity of $99.13\pm 0.12 \%$. Yield modeling analysis predicts high detuning-edge-yield using ABAA beyond the 1000-qubit scale. These results demonstrate the cutting-edge capability of frequency targeting using ABAA and open up a new avenue to systematically improving Hamiltonian targeting and optimization for scaling high-performance superconducting quantum processors.

quant-ph↗

arXiv2024

Modular Superconducting Qubit Architecture with a Multi-chip Tunable Coupler

We use a floating tunable coupler to mediate interactions between qubits on separate chips to build a modular architecture. We demonstrate three different designs of multi-chip tunable couplers using vacuum gap capacitors or superconducting indium bump bonds to connect the coupler to a microwave line on a common substrate and then connect to the qubit on the next chip. We show that the zero-coupling condition between qubits on separate chips can be achieved in each design and that the relaxation rates for the coupler and qubits are not noticeably affected by the extra circuit elements. Finally, we demonstrate two-qubit gate operations with fidelity at the same level as qubits with a tunable coupler on a single chip. Using one or more indium bonds does not degrade qubit coherence or impact the performance of two-qubit gates.

quant-ph↗

arXiv2023

Coherent control of a superconducting qubit using light

Quantum communications technologies require a network of quantum processors connected with low loss and low noise communication channels capable of distributing entangled states. Superconducting microwave qubits operating in cryogenic environments have emerged as promising candidates for quantum processor nodes. However, scaling these systems is challenging because they require bulky microwave components with high thermal loads that can quickly overwhelm the cooling power of a dilution refrigerator. Telecommunication frequency optical signals, meanwhile, can be fabricated in significantly smaller form factors while avoiding challenges due to high signal loss, noise sensitivity, and thermal loads due to their high carrier frequency and propagation in silica optical fibers. Transduction of information via coherent links between optical and microwave frequencies is therefore critical to leverage the advantages of optics for superconducting microwave qubits, while also enabling superconducting processors to be linked with low-loss optical interconnects. Here, we demonstrate coherent optical control of a superconducting qubit. We achieve this by developing a microwave-optical quantum transducer that operates with up to 1.18% conversion efficiency with low added microwave noise, and demonstrate optically-driven Rabi oscillations in a superconducting qubit.

quant-ph↗

arXiv2021

Parametric-resonance entangling gates with a tunable coupler

High-fidelity parametric gates have been demonstrated with superconducting qubits via rf flux modulation of the qubit frequency. The modulation however leads to renormalization of the bare qubit-qubit coupling, thereby reducing the gate speed. Here, we realize a parametric-resonance gate, which is activated by bringing the average frequency of the modulated qubit in resonance with a static-frequency qubit while approximately retaining the bare qubit-qubit coupling. The activation of parametric-resonance gates does not depend on the frequency of modulation, allowing us to choose the modulation frequencies and avoid frequency collisions. Moreover, we show that this approach is compatible with tunable coupler architectures, which reduce always-on residual couplings. Using these techniques, we demonstrate iSWAP and CZ gates between two qubits coupled via a tunable coupler with average process fidelities as high as $99.3\%$ and $97.9\%$, respectively. The flexibility in activating parametric-resonance gates combined with a tunable coupler architecture provides a pathway for building large-scale quantum computers.

quant-ph↗

arXiv2021

Full control of superconducting qubits with combined on-chip microwave and flux lines

As the field of quantum computing progresses to larger-scale devices, multiplexing will be crucial to scale quantum processors. While multiplexed readout is common practice for superconducting devices, relatively little work has been reported about the combination of flux and microwave control lines. Here, we present a method to integrate a microwave line and a flux line into a single "XYZ line". This combined control line allows us to perform fast single-qubit gates as well as to deliver flux signals to the qubits. The measured relaxation times of the qubits are comparable to state-of-art devices employing separate control lines. We benchmark the fidelity of single-qubit gates with randomized benchmarking, achieving a fidelity above 99.5%, and we demonstrate that XYZ lines can in principle be used to run parametric entangling gates.

quant-ph↗

arXiv2021

Floating tunable coupler for scalable quantum computing architectures

We propose a floating tunable coupler that does not rely on direct qubit-qubit coupling capacitances to achieve the zero-coupling condition. We show that the polarity of the qubit-coupler couplings can be engineered to offset the otherwise constant qubit-qubit coupling and attain the zero-coupling condition when the coupler frequency is above or below the qubit frequencies. We experimentally demonstrate these two operating regimes of the tunable coupler by implementing symmetric and asymmetric configurations of the coupler's superconducting pads with respect to the qubits. Such a floating tunable coupler provides flexibility in designing large-scale quantum processors while reducing the always-on residual couplings.

quant-ph↗

arXiv2019

Manufacturing low dissipation superconducting quantum processors

Enabling applications for solid state quantum technology will require systematically reducing noise, particularly dissipation, in these systems. Yet, when multiple decay channels are present in a system with similar weight, resolution to distinguish relatively small changes is necessary to infer improvements to noise levels. For superconducting qubits, uncontrolled variation of nominal performance makes obtaining such resolution challenging. Here, we approach this problem by investigating specific combinations of previously reported fabrication techniques on the quality of 242 thin film superconducting resonators and qubits. Our results quantify the influence of elementary processes on dissipation at key interfaces. We report that an end-to-end optimization of the manufacturing process that integrates multiple small improvements together can produce an average ${\overline{T}_{1}=76\pm13~μ}$s across 24 qubits with the best qubits having ${T_1\geq110~μ}$s. Moreover, our analysis places bounds on energy decay rates for three fabrication-related loss channels present in state-of-the-art superconducting qubits. Understanding dissipation through such systematic analysis may pave the way for lower noise solid state quantum computers.

quant-ph↗

arXiv2015

Bulk and surface loss in superconducting transmon qubits

Decoherence of superconducting transmon qubits is purported to be consistent with surface loss from two-level systems on the substrate surface. Here, we present a study of surface loss in transmon devices, explicitly designed to have varying sensitivities to different surface loss contributors. Our experiments also encompass two particular different sapphire substrates, which reveal the onset of a yet unknown additional loss mechanism outside of surface loss for one of the substrates. Tests across different wafers and devices demonstrate substantial variation, and we emphasize the importance of testing large numbers of devices for disentangling different sources of decoherence.

quant-ph↗

arXiv2015

Interacting two-level defects as sources of fluctuating high-frequency noise in superconducting circuits

Since the very first experiments, superconducting circuits have suffered from strong coupling to environmental noise, destroying quantum coherence and degrading performance. In state-of-the-art experiments, it is found that the relaxation time of superconducting qubits fluctuates as a function of time. We present measurements of such fluctuations in a 3D-Transmon circuit and develop a qualitative model based on interactions within a bath of background two-level systems (TLS) which emerge from defects in the device material. In our model, the time-dependent noise density acting on the qubit emerges from its near-resonant coupling to high-frequency TLS which experience energy fluctuations due to their interaction with thermally fluctuating TLS at low frequencies. We support the model by providing experimental evidence of such energy fluctuations observed in a single TLS in a phase qubit circuit.

cond-mat.mes-hall↗

arXiv2012

Frequency Division Multiplexing Readout and Simultaneous Manipulation of an Array of Flux Qubits

An important desired ingredient of superconducting quantum circuits is a readout scheme whose complexity does not increase with the number of qubits involved in the measurement. Here, we present a readout scheme employing a single microwave line, which enables simultaneous readout of multiple qubits. Consequently, scaling up superconducting qubit circuits is no longer limited by the readout apparatus. Parallel readout of 6 flux qubits using a frequency division multiplexing technique is demonstrated, as well as simultaneous manipulation and time resolved measurement of 3 qubits. We discuss how this technique can be scaled up to read out hundreds of qubits on a chip.

quant-ph↗

arXiv2012

Superconducting qubit in waveguide cavity with coherence time approaching 0.1ms

We report a superconducting artificial atom with an observed quantum coherence time of T2*=95us and energy relaxation time T1=70us. The system consists of a single Josephson junction transmon qubit embedded in an otherwise empty copper waveguide cavity whose lowest eigenmode is dispersively coupled to the qubit transition. We attribute the factor of four increase in the coherence quality factor relative to previous reports to device modifications aimed at reducing qubit dephasing from residual cavity photons. This simple device holds great promise as a robust and easily produced artificial quantum system whose intrinsic coherence properties are sufficient to allow tests of quantum error correction.

quant-ph↗

arXiv2006

Characterization of a fabrication process for the integration of superconducting qubits and RSFQ circuits

In order to integrate superconducting qubits with rapid-single-flux-quantum (RSFQ) control circuitry, it is necessary to develop a fabrication process that fulfills at the same time the requirements of both elements: low critical current density, very low operating temperature (tens of milliKelvin) and reduced dissipation on the qubit side; high operation frequency, large stability margins, low dissipated power on the RSFQ side. For this purpose, VTT has developed a fabrication process based on Nb trilayer technology, which allows the on-chip integration of superconducting qubits and RSFQ circuits even at very low temperature. Here we present the characterization (at 4.2 K) of the process from the point of view of the Josephson devices and show that they are suitable to build integrated superconducting qubits.

cond-mat.supr-con↗

arXiv2005

Superconducting tunable flux qubit with direct readout scheme

We describe a simple and efficient scheme for the readout of a tunable flux qubit, and present preliminary experimental tests for the preparation, manipulation and final readout of the qubit state, performed in incoherent regime at liquid Helium temperature. The tunable flux qubit is realized by a double SQUID with an extra Josephson junction inserted in the large superconducting loop, and the readout is performed by applying a current ramp to the junction and recording the value for which there is a voltage response, depending on the qubit state. This preliminary work indicates the feasibility and efficiency of the scheme.

cond-mat.supr-con↗