Searcharxiv⌕ Search

arXiv subjects

Stefano Zapperi

Publications and source records attributed to Stefano Zapperi.

At least 91 records · Page 5Linked to original sources
arXiv2008

Stochastic dynamics of a sheared granular medium

We experimentally investigate the response of a sheared granular medium in a Couette geometry. The apparatus exhibits the expected stick-slip motion and we probe it in the very intermittent regime resulting from low driving. Statistical analysis of the dynamic fluctuations reveals notable regularities. We observe a possible stability property for the torque distribution, reminiscent of the stability of Gaussian independent variables. In this case, however, the variables are correlated and the distribution is skewed. Moreover, the whole dynamical intermittent regime can be described with a simple stochastic model, finding good quantitative agreement with the experimental data. Interestingly, a similar model has been previously introduced in the study of magnetic domain wall motion, a source of Barkhausen noise. Our study suggests interesting connections between different complex phenomena and reveals some unexpected features that remain to be explained.

cond-mat.stat-mech↗
arXiv2008

Fracture size effects from disordered lattice models

We study size effects in the fracture strength of notched disordered samples using numerical simulations of lattice models for fracture. In particular, we consider the random fuse model, the random spring model and the random beam model, which all give similar results. These allow us to establish and understand the crossover between a regime controlled by disorder-induced statistical effects and a stress-concentration controlled regime ruled by fracture mechanics. The crossover is described by a scaling law that accounts for the presence of fracture process zone which we quantify by averaging over several disordered configurations of the model. The models allow to study the development of the fracture process zone as the load is increased and to express this in terms of crack resistance (R-curve).

cond-mat.mtrl-sci↗
arXiv2008

Anomalous Roughness of Fracture Surfaces in 2D Fuse Models

We study anomalous scaling and multiscaling of two-dimensional crack profiles in the random fuse model using both periodic and open boundary conditions. Our large scale and extensively sampled numerical results reveal the importance of crack branching and coalescence of microcracks, which induce jumps in the solid-on-solid crack profiles. Removal of overhangs (jumps) in the crack profiles eliminates the multiscaling observed in earlier studies and reduces anomalous scaling. We find that the probability density distribution $p(Δh(\ell))$ of the height differences $Δh(\ell) = [h(x+\ell) - h(x)]$ of the crack profile obtained after removing the jumps in the profiles has the scaling form $p(Δh(\ell)) = <Δh^2(\ell)>^{-1/2} ~f(\frac{Δh(\ell)}{<Δh^2(\ell)>^{1/2}})$, and follows a Gaussian distribution even for small bin sizes $\ell$. The anomalous scaling can be summarized with the scaling relation $[\frac{<Δh^2(\ell)>^{1/2}}{<Δh^2(L/2)>^{1/2}}]^{1/ζ_{loc}} + \frac{(\ell-L/2)^2}{(L/2)^2} = 1$, where $<Δh^2(L/2)>^{1/2} \sim L^ζ$.

cond-mat.stat-mech↗
arXiv2008

Crack Roughness in the 2D Random Threshold Beam Model

We study the scaling of two-dimensional crack roughness using large scale beam lattice systems. Our results indicate that the crack roughness obtained using beam lattice systems does not exhibit anomalous scaling in sharp contrast to the simulation results obtained using scalar fuse lattices. The local and global roughness exponents ($ζ_{loc}$ and $ζ$, respectively) are equal to each other, and the two-dimensional crack roughness exponent is estimated to be $ζ_{loc} = ζ= 0.64 \pm 0.02$. Removal of overhangs (jumps) in the crack profiles eliminates even the minute differences between the local and global roughness exponents. Furthermore, removing these jumps in the crack profile completely eliminates the multiscaling observed in other studies. We find that the probability density distribution $p(Δh(\ell))$ of the height differences $Δh(\ell) = [h(x+\ell) - h(x)]$ of the crack profile obtained after removing the jumps in the profiles follows a Gaussian distribution even for small window sizes ($\ell$).

cond-mat.stat-mech↗
arXiv2007

Effect of Disorder and Notches on Crack Roughness

We analyze the effect of disorder and notches on crack roughness in two dimensions. Our simulation results based on large system sizes and extensive statistical sampling indicate that the crack surface exhibits a universal local roughness of $ζ_{loc} = 0.71$ and is independent of the initial notch size and disorder in breaking thresholds. The global roughness exponent scales as $ζ= 0.87$ and is also independent of material disorder. Furthermore, we note that the statistical distribution of crack profile height fluctuations is also independent of material disorder and is described by a Gaussian distribution, albeit deviations are observed in the tails.

cond-mat.stat-mech↗
arXiv2007

Role of disorder in the size-scaling of material strength

We study the sample size dependence of the strength of disordered materials with a flaw, by numerical simulations of lattice models for fracture. We find a crossover between a regime controlled by the fluctuations due to disorder and another controlled by stress-concentrations, ruled by continuum fracture mechanics. The results are formulated in terms of a scaling law involving a statistical fracture process zone. Its existence and scaling properties are only revealed by sampling over many configurations of the disorder. The scaling law is in good agreement with experimental results obtained from notched paper samples.

cond-mat.mtrl-sci↗
arXiv2007

Eddy current damping of a moving domain wall: beyond the quasistatic approximation

In conducting ferromagnetic materials, a moving domain wall induces eddy currents in the sample which give rise to an effective retarding pressure on the domain wall. We show here that the pressure is not just proportional to the instantaneous velocity of the wall, as often assumed in domain wall models, but depends on the history of the motion. We calculate the retarding pressure by solving the Maxwell equations for the field generated by the eddy currents, and show how its effect can be accounted for by associating a negative effective mass to the magnetic wall. We analyze the dependence of this effect on the sample geometry and discuss the implications for Barkhausen noise measurements.

cond-mat.dis-nn↗
arXiv2006

Statistical Models of Fracture

Disorder and long-range interactions are two of the key components that make material failure an interesting playfield for the application of statistical mechanics. The cornerstone in this respect has been lattice models of the fracture in which a network of elastic beams, bonds or electrical fuses with random failure thresholds are subject to an increasing external load. These models describe on a qualitative level the failure processes of real, brittle or quasi-brittle materials. This has been particularly important in solving the classical engineering problems of material strength: the size dependence of maximum stress and its sample to sample statistical fluctuations. At the same time, lattice models pose many new fundamental questions in statistical physics, such as the relation between fracture and phase transitions. Experimental results point out to the existence of an intriguing crackling noise in the acoustic emission and of self-affine fractals in the crack surface morphology. Recent advances in computer power have enabled considerable progress in the understanding of such models. Among these partly still controversial issues, are the scaling and size effects in material strength and accumulated damage, the statistics of avalanches or bursts of microfailures, and the morphology of the crack surface. Here we present an overview of the results obtained with lattice models for fracture, highlighting the relations with statistical physics theories and more conventional fracture mechanics approaches.

cond-mat.stat-mech↗
arXiv2006

Morphology of two dimensional fracture surface

We consider the morphology of two dimensional cracks observed in experimental results obtained from paper samples and compare these results with the numerical simulations of the random fuse model (RFM). We demonstrate that the data obey multiscaling at small scales but cross over to self-affine scaling at larger scales. Next, we show that the roughness exponent of the random fuse model is recovered by a simpler model that produces a connected crack, while a directed crack yields a different result, close to a random walk. We discuss the multiscaling behavior of all these models.

cond-mat.dis-nn↗
arXiv2006

Loss separation for dynamic hysteresis in magnetic thin films

We develop a theory for dynamic hysteresis in ferromagnetic thin films, on the basis of the phenomenological principle of loss separation. We observe that, remarkably, the theory of loss separation, originally derived for bulk metallic materials, is applicable to disordered magnetic systems under fairly general conditions regardless of the particular damping mechanism. We confirm our theory both by numerical simulations of a driven random--field Ising model, and by re--examining several experimental data reported in the literature on dynamic hysteresis in thin films. All the experiments examined and the simulations find a natural interpretation in terms of loss separation. The power losses dependence on the driving field rate predicted by our theory fits satisfactorily all the data in the entire frequency range, thus reconciling the apparent lack of universality observed in different materials.

cond-mat.mtrl-sci↗
arXiv2006

Dynamic hysteresis from zigzag domain walls

We investigate dynamic hysteresis in ferromagnetic thin films with zigzag domain walls. We introduce a discrete model describing the motion of a wall in a disordered ferromagnet with in-plane magnetization, driven by an external magnetic field, considering the effects of dipolar interactions and anisotropy. We analyze the effects of external field frequency and temperature on the coercive field by Monte Carlo simulations, and find a good agreement with the experimental data reported in literature for Fe/GaAs films. This implies that dynamic hysteresis in this case can be explained by a single propagating domain wall model without invoking domain nucleation.

cond-mat.stat-mech↗
arXiv2006

Brownian forces in sheared granular matter

We present results from a series of experiments on a granular medium sheared in a Couette geometry and show that their statistical properties can be computed in a quantitative way from the assumption that the resultant from the set of forces acting in the system performs a Brownian motion. The same assumption has been utilised, with success, to describe other phenomena, such as the Barkhausen effect in ferromagnets, and so the scheme suggests itself as a more general description of a wider class of driven instabilities.

cond-mat.stat-mech↗
arXiv2005

The role of stationarity in magnetic crackling noise

We discuss the effect of the stationarity on the avalanche statistics of Barkhuasen noise signals. We perform experimental measurements on a Fe$_{85}$B$_{15}$ amorphous ribbon and compare the avalanche distributions measured around the coercive field, where the signal is stationary, with those sampled through the entire hysteresis loop. In the first case, we recover the scaling exponents commonly observed in other amorphous materials ($τ=1.3$, $α=1.5$). while in the second the exponents are significantly larger ($τ=1.7$, $α=2.2$). We provide a quantitative explanation of the experimental results through a model for the depinning of a ferromagnetic domain wall. The present analysis shed light on the unusually high values for the Barkhausen noise exponents measured by Spasojevic et al. [Phys. Rev. E 54 2531 (1996)].

cond-mat.stat-mech↗
arXiv2005

Power spectra of self-organized critical sandpiles

We analyze the power spectra of avalanches in two classes of self-organized critical sandpile models, the Bak-Tang-Wiesenfeld model and the Manna model. We show that these decay with a $1/f^α$ power law, where the exponent value $α$ is significantly smaller than 2 and equals the scaling exponent relating the avalanche size to its duration. We discuss the basic ingredients behind this result, such as the scaling of the average avalanche shape.

cond-mat.stat-mech↗
arXiv2005

Signature of effective mass in crackling noise asymmetry

Crackling noise is a common feature in many dynamic systems [1-9], the most familiar instance of which is the sound made by a sheet of paper when crumpled into a ball. Although seemingly random, this noise contains fundamental information about the properties of the system in which it occurs. One potential source of such information lies in the asymmetric shape of noise pulses emitted by a diverse range of noisy systems [8-12], but the cause of this asymmetry has lacked explanation [1]. Here we show that the leftward asymmetry observed in the Barkhausen effect [2] - the noise generated by the jerky motion of domain walls as they interact with impurities in a soft magnet - is a direct consequence of a magnetic domain wall's negative effective mass. As well as providing a means of determining domain wall effective mass from a magnet's Barkhausen noise our work suggests an inertial explanation for the origin of avalanche asymmetries in crackling noise phenomena more generally.

cond-mat.stat-mech↗
arXiv2005

Grain boundaries in vortex matter

We explore the statistical properties of grain boundaries in the vortex polycrystalline phase of type II superconductors. Treating grain boundaries as arrays of dislocations interacting through linear elasticity, we show that self-interaction of a deformed grain boundary is equivalent to a non-local long-range surface tension. This affects the pinning properties of grain boundaries, that are found to be less rough than isolated dislocations. The presence of grain boundaries has an important effect on the transport properties of type II superconductors as we show by numerical simulations: our results indicate that the critical current is higher for a vortex polycrystal than for a regular vortex lattice. Finally, we discuss the possible role of grain boundaries in vortex lattice melting. Through a phenomenological theory we show that melting can be preceded by an intermediate polycrystalline phase.

cond-mat.stat-mech↗
arXiv2005

Statistical properties of fracture in a random spring model

Using large scale numerical simulations we analyze the statistical properties of fracture in the two dimensional random spring model and compare it with its scalar counterpart: the random fuse model. We first consider the process of crack localization measuring the evolution of damage as the external load is raised. We find that, as in the fuse model, damage is initially uniform and localizes at peak load. Scaling laws for the damage density, fracture strength and avalanche distributions follow with slight variations the behavior observed in the random fuse model. We thus conclude that scalar models provide a faithful representation of the fracture properties of disordered systems.

cond-mat.mtrl-sci↗