arXiv subjects

Steinar Stapnes

Publications and source records attributed to Steinar Stapnes.

16 recordsLinked to original sources

arXiv2026

Initial Characterisation of a Prototype TMR Assembly for an Electron-Driven CANS at CERN's CLEAR Facility

The Versatile ULtra-Compact Accelerator-based Neutron source (VULCAN) project is developing a compact accelerator-driven neutron source (CANS) optimised for neutron diffractometry in industrial and university settings. Central to VULCAN is a novel target-moderator-reflector (TMR) assembly optimised to convert a 35 MeV pulsed electron beam into short neutron pulses (FWHM < 20 {\mu}s) in the 1.5-3.5 {\AA} wavelength range. To validate the simulation-driven design process, a prototype TMR was developed for testing at CERN's CLEAR facility, and this paper presents the design, installation, and results of the first experimental campaign. While moderated neutron pulses were successfully detected, significant discrepancies were observed between the experimental and simulated energy spectra. Potential causes are discussed and recommendations for follow-up measurements are provided.

physics.ins-det↗

arXiv2026

RadMaps: A Geospatial Framework for Simultaneously Modelling Capacity and Geographic Constraints on Radiotherapy Access

Background: Access to radiotherapy (RT) is constrained by two compounding factors: insufficient machine capacity to meet patient demand and geographic distance from treatment facilities. Existing analyses address these factors separately, constraining the insights available to planners and policymakers. This paper presents RadMaps, an open-source geospatial framework that simultaneously models capacity and geographic constraints on RT access at any spatial scale. Methods: RadMaps operates on Uber's H3 hexagonal grid and integrates population density data with national cancer incidence estimates and RT facility inventories. RT demand is estimated using cancer-site-specific RT utilisation rates, and geographic access is modelled via configurable decay functions using either distance, driving time, or public transport time. A greedy nearest-first allocation algorithm assigns demand to facilities subject to both capacity and geographic constraints, producing a localised access metric for every H3 hexagon. Results: Applied globally with a 200 km step-function access threshold, RadMaps computes a capacity-only access of 70 %, a geography-only access of 91 %, and a combined RT access of 60 %, illustrating the compounding effect of capacity and geographic constraints to significantly reduce effective access. High-resolution analyses of six countries demonstrate the tool's ability to localise access deficits at sub-national scale and reveal distinct access profiles: capacity-limited, geographically-limited, and doubly-constrained. Conclusions: RadMaps provides a flexible, open-access framework for visualising and identifying RT access gaps at regional to global scales, with applications in infrastructure planning and policy prioritisation. RadMaps' modular framework is also readily extensible to other spatial access modelling applications.

physics.med-ph↗

arXiv2025

Performance of High-Intensity Electron Linacs as Drivers for Compact Neutron Sources

The demand for neutron production facilities is increasing, as the applications of neutron science are manifold. These applications drive the need for efficient and compact neutron sources. In this context, this paper explores the potential performance of normal-conducting compact electron linacs from 20 MeV to 500 MeV as drivers for neutron sources. Results from a G4BEAMLINE simulation study find optimum dimensions of a tungsten target and characterize the emitted neutron spectrum. Two electron linac are then evaluated as drivers of such target: HPCI, an X-band linac; and CTF3 drive beam linac, an S-band alternative. The simulation study shows neutron strength values up to $1.5\cdot 10^{15}$ n/s can be attained, as well as low energy consumed per neutron produced values up to $5.65 \cdot 10^{-10}$ J/n, suggesting these electron-based neutron sources may be a compact and energy-efficient solution for many research, industry and medical applications.

physics.acc-ph↗

arXiv2025

ILC250 Cost Update -- 2024

The International Linear Collider was conceived as a global project for an energy-frontier electron-positron collider.It employs superconducting RF and nano-beam technologies with a center-of-mass energy of 500 GeV. Its cost was estimated in 2013, based on the Technical Design Report published in 2013.Japan's high-energy community proposed to host the ILC in Japan as a Higgs boson factory at 250 GeV in its first phase, and a revised cost estimate was conducted in 2017 to host it in Japan. However, due to global price increases and currency fluctuations that emerged afterward, the 2017 estimate is now outdated. A new cost evaluation has therefore been performed, according for global inflation tends, exchange rate shifts, and recent experiences in SRF based accelerators. This report describes the cost update performed in 2024. The cost update is included in the ILC Status Report in May 2025, contributing to the ongoing 2026 update of the European Strategy for Particle Physics.

physics.acc-ph↗

arXiv2025

Enhancing European Cooperation in the Search for Dark Matter

The search for dark matter is an exciting topic that is pursued in different communities over a wide range of masses and using a variety of experimental approaches. The result is a strongly correlated matrix of activities across Europe and beyond, both on the experimental and the theoretical side. We suggest to encourage and foster the collaboration of the involved institutions on technical, scientific and organisational level, in order to realise the synergies that are required to increase the impact of dark matter research and to cope with the increasing experiment sizes. The suggested network -- loosely titled "DMInfraNet" -- could be realised as a new initiative of the European strategy or be based on existing structures like iDMEu or DRD. The network can also serve as a nucleus for future joint funding proposals.

hep-ex↗

arXiv2025

The Compact Linear e$^+$e$^-$ Collider (CLIC)

The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear e$^+$e$^-$ collider studied by the international CLIC and CLICdp collaborations. CLIC uses a two-beam acceleration scheme, in which normal-conducting high-gradient 12 GHz accelerating structures are powered via a high-current drive beam. CLIC is foreseen to be built and operated in stages. The initial 380 GeV stage, with a site length of 11 km, optimally combines the exploration of Higgs and top-quark physics, including a top threshold scan near 350 GeV. A higher-energy stage, still using the initial single drive-beam complex, can be optimised for any energy up to 2 TeV. Parameters are presented in detail for a 1.5 TeV stage, with a site length of 29 km. Since the 2018 ESPPU reporting, significant effort was invested in CLIC accelerator optimisation, technology developments and system tests, including collaboration with new-generation light sources and free-electron lasers. CLIC implementation aspects at CERN have covered detailed studies of civil engineering, electrical networks, cooling and ventilation, scheduling, and costing. The CLIC baseline at 380 GeV is now 100 Hz operation, with a luminosity of 4.5$\times 10^{34}$ cm$^{-2}$s$^{-1}$ and a power consumption of 166 MW. Compared to the 2018 design, this gives three times higher luminosity-per-power. The new baseline has two beam-delivery systems, allowing for two detectors operating in parallel. The cost estimate of the 380 GeV baseline is approximately 7.2 billion CHF. The construction of the first CLIC energy stage could start as early as ~2034/35 with first beams following a decade later. This report summarises the CLIC project, its implementation and running scenarios, with emphasis on new developments and recent progress. It concludes with an update on the CLIC detector studies and on the physics potential in light of the improved accelerator performance.

physics.acc-ph↗

arXiv2025

HALHF: a hybrid, asymmetric, linear Higgs factory using plasma- and RF-based acceleration. Backup Document

This document expands on the Comprehensive Summary submitted to the EPPSU 2026. It contains details on aspects of the HALHF project that could not be fitted into the Summary. Some sections contain work that is still preliminary and/or status reports on current progress.

physics.acc-ph↗

arXiv2025

HALHF: a hybrid, asymmetric, linear Higgs factory using plasma- and RF-based acceleration

HALHF is a hybrid linear collider that uses electron-driven plasma-wakefield acceleration to accelerate electrons to high energy while using radio-frequency cavity technology to accelerate positrons. The most cost-effective solution collides low-energy positrons with high-energy electrons, producing a boost to the final state in the electron direction with $\gamma= 1.67$. The current HALHF baseline design produces a luminosity comparable to that of the baseline ILC but with a greatly reduced construction and carbon footprint and hence much lower cost than the mature linear-collider designs ILC and CLIC. Costs for HALHF are evaluated, together with that for the approximate 15-year R\&D programme necessary to realise HALHF. Time scales and cost for the R\&D are estimated. Upgrade paths for HALHF technology from a 250~GeV Higgs factory, through 380 and 550~GeV, up to 10~TeV are sketched.

physics.acc-ph↗

arXiv2019

The International Linear Collider. A European Perspective

The International Linear Collider (ILC) being proposed in Japan is an electron-positron linear collider with an initial energy of 250 GeV. The ILC accelerator is based on the technology of superconducting radio-frequency cavities. This technology has reached a mature stage in the European XFEL project and is now widely used. The ILC will start by measuring the Higgs properties, providing high-precision and model-independent determinations of its parameters. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. The use of polarised electron and positron beams opens new capabilities and scenarios that add to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The international -- including European -- interest for the project is very strong. Europe has participated in the ILC project since its early conception and plays a major role in its present development covering most of its scientific and technological aspects: physics studies, accelerator and detectors. The potential for a wide participation of European groups and laboratories is thus high, including important opportunities for European industry. Following decades of technical development, R&D, and design optimisation, the project is ready for construction and the European particle physics community, technological centers and industry are prepared to participate in this challenging endeavour.

hep-ex↗

arXiv2019

The International Linear Collider. A Global Project

A large, world-wide community of physicists is working to realise an exceptional physics program of energy-frontier, electron-positron collisions with the International Linear Collider (ILC). This program will begin with a central focus on high-precision and model-independent measurements of the Higgs boson couplings. This method of searching for new physics beyond the Standard Model is orthogonal to and complements the LHC physics program. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. Polarised electron and positron beams add unique opportunities to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The key accelerator technology, superconducting radio-frequency cavities, has matured. Optimised collider and detector designs, and associated physics analyses, were presented in the ILC Technical Design Report, signed by 2400 scientists. There is a strong interest in Japan to host this international effort. A detailed review of the many aspects of the project is nearing a conclusion in Japan. Now the Japanese government is preparing for a decision on the next phase of international negotiations, that could lead to a project start within a few years. The potential timeline of the ILC project includes an initial phase of about 4 years to obtain international agreements, complete engineering design and prepare construction, and form the requisite international collaboration, followed by a construction phase of 9 years.

hep-ex↗

arXiv2018

Machine Parameters and Projected Luminosity Performance of Proposed Future Colliders at CERN

In response to a request from the CERN Scientific Policy Committee (SPC), the machine parameters and expected luminosity performance for several proposed post-LHC collider projects at CERN are compiled: three types of hadron colliders (HL-LHC upgrade, FCC-hh and HE-LHC), a circular lepton collider (FCC-ee), a linear lepton collider (CLIC), and three options for lepton-hadron colliders (LHeC, HE-LHeC, and FCC-eh). Particular emphasis is put on availability, physics run time, and efficiency. The information contained in this document was presented at the SPC Meeting of September 2018. It will serve as one of the inputs to the 2019/20 Update of the European Strategy for Particle Physics.

physics.acc-ph↗

arXiv2013

Physics at the CLIC e+e- Linear Collider -- Input to the Snowmass process 2013

This paper summarizes the physics potential of the CLIC high-energy e+e- linear collider. It provides input to the Snowmass 2013 process for the energy-frontier working groups on The Higgs Boson (HE1), Precision Study of Electroweak Interactions (HE2), Fully Understanding the Top Quark (HE3), as well as The Path Beyond the Standard Model -- New Particles, Forces, and Dimensions (HE4). It is accompanied by a paper describing the CLIC accelerator study, submitted to the Frontier Capabilities group of the Snowmass process.

hep-ex↗

arXiv2013

The International Linear Collider Technical Design Report - Volume 3.II: Accelerator Baseline Design

The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.

physics.acc-ph↗

arXiv2013

The International Linear Collider Technical Design Report - Volume 3.I: Accelerator R&D in the Technical Design Phase

physics.acc-ph↗

arXiv2013

CLIC e+e- Linear Collider Studies - Input to the Snowmass process 2013

This paper addresses the issues in question for Energy Frontier Lepton and Gamma Colliders by the Frontier Capabilities group of the Snowmass 2013 process and is structured accordingly. It will be accompanied by a paper describing the Detector and Physics studies for the CLIC project currently in preparation for submission to the Energy Frontier group.

physics.acc-ph↗

arXiv2012

CLIC e+e- Linear Collider Studies

This document provides input from the CLIC e+e- linear collider studies to the update process of the European Strategy for Particle Physics. It is submitted on behalf of the CLIC/CTF3 collaboration and the CLIC physics and detector study. It describes the exploration of fundamental questions in particle physics at the energy frontier with a future TeV-scale e+e- linear collider based on the Compact Linear Collider (CLIC) two-beam acceleration technique. A high-luminosity high-energy e+e- collider allows for the exploration of Standard Model physics, such as precise measurements of the Higgs, top and gauge sectors, as well as for a multitude of searches for New Physics, either through direct discovery or indirectly, via high-precision observables. Given the current state of knowledge, following the observation of a \sim125 GeV Higgs-like particle at the LHC, and pending further LHC results at 8 TeV and 14 TeV, a linear e+e- collider built and operated in centre-of-mass energy stages from a few-hundred GeV up to a few TeV will be an ideal physics exploration tool, complementing the LHC. Two example scenarios are presented for a CLIC accelerator built in three main stages of 500 GeV, 1.4 (1.5) TeV, and 3 TeV, together with the layout and performance of the experiments and accompanied by cost estimates. The resulting CLIC physics potential and measurement precisions are illustrated through detector simulations under realistic beam conditions.

physics.acc-ph↗