arXiv subjects

Stella Seah

Publications and source records attributed to Stella Seah.

14 recordsLinked to original sources

arXiv2022

Characterizing the performance of heat rectifiers

A physical system connected to two thermal reservoirs at different temperatures is said to act as a heat rectifier when it is able to bias the heat current in a given direction, similarly to an electronic diode. We propose to quantify the performance of a heat rectifier by mapping out the trade-off between heat currents and rectification. By optimizing over the system's parameters, we obtain Pareto fronts, which can be efficiently computed using general coefficients of performance. This approach naturally highlights the fundamental trade-off between heat rectification and conduction, and allows for a meaningful comparison between different devices for heat rectification. We illustrate the practical relevance of these ideas on three minimal models for spin-boson nanoscale rectifiers, i.e., systems consisting of one or two interacting qubits coupled to bosonic reservoirs biased in temperature. Our results demonstrate the superiority of two strongly-interacting qubits for heat rectification.

quant-ph↗

arXiv2021

Uninformed Bayesian Quantum Thermometry

We study the Bayesian approach to thermometry with no prior knowledge about the expected temperature scale, through the example of energy measurements on fully or partially thermalized qubit probes. We show that the most common Bayesian estimators, namely the mean and the median, lead to high-temperature divergences when used for uninformed thermometry. To circumvent this and achieve better overall accuracy, we propose two new estimators based on an optimization of relative deviations. Their global temperature-averaged behavior matches a modified van Trees bound, which complements the Cram\'er-Rao bound for smaller probe numbers and unrestricted temperature ranges. Furthermore, we show that, using partially thermalized probes, one can increase the range of temperatures to which the thermometer is sensitive at the cost of the local accuracy.

quant-ph↗

arXiv2021

Fundamental limits in Bayesian thermometry and attainability via adaptive strategies

We investigate the limits of thermometry using quantum probes at thermal equilibrium within the Bayesian approach. We consider the possibility of engineering interactions between the probes in order to enhance their sensitivity, as well as feedback during the measurement process, i.e., adaptive protocols. On the one hand, we obtain an ultimate bound on thermometry precision in the Bayesian setting, valid for arbitrary interactions and measurement schemes, which lower bounds the error with a quadratic (Heisenberg-like) scaling with the number of probes. We develop a simple adaptive strategy that can saturate this limit. On the other hand, we derive a no-go theorem for non-adaptive protocols that does not allow for better than linear (shot-noise-like) scaling even if one has unlimited control over the probes, namely access to arbitrary many-body interactions.

quant-ph↗

arXiv2021

Quantum speed-up in collisional battery charging

We present a collision model for the charging of a quantum battery by identical nonequilibrium qubit units. When the units are prepared in a mixture of energy eigenstates, the energy gain in the battery can be described by a classical random walk, where both average energy and variance grow linearly with time. Conversely, when the qubits contain quantum coherence, interference effects buildup in the battery and lead to a faster spreading of the energy distribution, reminiscent of a quantum random walk. This can be exploited for faster and more efficient charging of a battery initialized in the ground state. Specifically, we show that coherent protocols can yield higher charging power than any possible incoherent strategy, demonstrating a quantum speed-up at the level of a single battery. Finally, we characterize the amount of extractable work from the battery through the notion of ergotropy.

quant-ph↗

arXiv2020

Surpassing the Thermal Cramer-Rao Bound with Collisional Thermometry

In collisional thermometry, a system in contact with the thermal bath is probed by a stream of ancillas. Coherences and collective measurements were shown to improve the Fisher information in some parameter regimes, for a stream of independent and identically prepared (i.i.d.) ancillas in some specific states [Seah et al., Phys. Rev. Lett., 180602 (2019)]. Here we refine the analysis of this metrological advantage by optimising over the possible input ancilla states, also for block-i.i.d.~states of block size b=2. For both an indirect measurement interaction and a coherent energy exchange channel, we show when the thermal Cram\'er-Rao bound can be beaten, and when a collective measurement of $N>1$ ancilla may return advantages over single-copy measurements.

quant-ph↗

arXiv2020

Maxwell's lesser demon: a quantum engine driven by pointer measurements

We discuss a self-contained spin-boson model for a measurement-driven engine, in which a demon generates work from thermal excitations of a quantum spin via measurement and feedback control. Instead of granting it full direct access to the spin state and to Landauer's erasure strokes for optimal performance, we restrict this demon's action to pointer measurements, i.e. random or continuous interrogations of a damped mechanical oscillator that assumes macroscopically distinct positions depending on the spin state. The engine can reach simultaneously the power and efficiency benchmarks and operate in temperature regimes where quantum Otto engines would fail.

quant-ph↗

arXiv2019

Collisional quantum thermometry

We introduce a general framework for thermometry based on collisional models, where ancillas probe the temperature of the environment through an intermediary system. This allows for the generation of correlated ancillas even if they are initially independent. Using tools from parameter estimation theory, we show through a minimal qubit model that individual ancillas can already outperform the thermal Cramer-Rao bound. In addition, due to the steady-state nature of our model, when measured collectively the ancillas always exhibit superlinear scalings of the Fisher information. This means that even collective measurements on pairs of ancillas will already lead to an advantage. As we find in our qubit model, such a feature may be particularly valuable for weak system-ancilla interactions. Our approach sets forth the notion of metrology in a sequential interactions setting, and may inspire further advances in quantum thermometry.

quant-ph↗

arXiv2019

Almost thermal operations: inhomogeneous reservoirs

The resource theory of thermal operations explains the state transformations that are possible in a very specific thermodynamic setting: there is only one thermal bath, auxiliary systems can only be in corresponding thermal state (free states), and the interaction must commute with the free Hamiltonian (free operation). In this paper we study the mildest deviation: the reservoir particles are subject to inhomogeneities, either in the local temperature (introducing resource states) or in the local Hamiltonian (generating a resource operation). For small inhomogeneities, the two models generate the same channel and thus the same state transformations. However, their thermodynamics is significantly different when it comes to work generation or to the interpretation of the "second laws of thermal operations".

quant-ph↗

arXiv2019

Nonequilibrium Dynamics with Finite-Time Repeated Interactions

We study quantum dynamics in the framework of repeated interactions between a system and a stream of identical probes. We present a coarse-grained master equation that captures the system's dynamics in the natural regime where interactions with different probes do not overlap, but is otherwise valid for arbitrary values of the interaction strength and mean interaction time. We then apply it to some specific examples. For probes prepared in Gibbs states, such channels have been used to describe thermalisation: while this is the case for many choices of parameters, for others one finds out-of-equilibrium states including inverted Gibbs and maximally mixed states. Gapless probes can be interpreted as performing an indirect measurement, and we study the energy transfer associated with this measurement.

quant-ph↗

arXiv2018

Refrigeration beyond weak internal coupling

We investigate the performance of a three-spin quantum absorption refrigerator using a refined open quantum system model valid across all inter-spin coupling strengths. It describes the transition between previous approximate models for the weak and the ultrastrong coupling limit, and it predicts optimal refrigeration for moderately strong coupling, where both approximations are inaccurate. Two effects impede a more effective cooling: the coupling between the spins no longer reduces to a simple resonant energy exchange (the rotating wave approximation fails), and the interactions with the thermal baths become sensitive to the level splitting, thus opening additional heat channels between the reservoirs. We identify the modified conditions of refrigeration as a function of the inter-spin coupling strength, and we show that, contrary to intuition, a high-temperature work reservoir thwarts refrigeration in the strong coupling regime.

quant-ph↗

arXiv2018

Violation of all the second laws of thermal operations by inhomogeneous reservoirs

In the resource theory of thermodynamics, the decrease of the free energy based on von Neumann entropy is not a sufficient condition to determine free evolution. Rather, a whole family of generalised free energies $F_α$ must be monotonically decreasing. We study the resilience of this result to relaxations of the framework. We use a toy collisional model, in which the deviations from the ideal situation can be described as arising from inhomogeneities of local fields or temperatures. For any small amount of perturbation, we find that there exist initial states such that both single-shot and averaged values of $F_α$ do not decrease monotonically for all $α>0$. A geometric representation accounts for the observed behavior in a graphic way.

quant-ph↗

arXiv2018

Quantum Rotor Engines

This chapter presents autonomous quantum engines that generate work in the form of directed motion for a rotor. We first formulate a prototypical clock-driven model in a time-dependent framework and demonstrate how it can be translated into an autonomous engine with the introduction of a planar rotor degree of freedom. The rotor plays both the roles of internal engine clock and of work repository. Using the example of a single-qubit piston engine, the thermodynamic performance is then reviewed. We evaluate the extractable work in terms of ergotropy, the kinetic energy associated to net directed rotation, as well as the intrinsic work based on the exerted torque under autonomous operation; and we compare them with the actual energy output to an external dissipative load. The chapter closes with a quantum-classical comparison of the engine's dynamics. For the single-qubit piston example, we propose two alternative representations of the qubit in an entirely classical framework: (i) a coin flip model and (ii) a classical magnet moment, showing subtle differences between the quantum and classical descriptions.

quant-ph↗

arXiv2018

Work production of quantum rotor engines

We study the mechanical performance of quantum rotor heat engines in terms of common notions of work using two prototypical models: a mill driven by the heat flow from a hot to a cold mode, and a piston driven by the alternate heating and cooling of a single working mode. We evaluate the extractable work in terms of ergotropy, the kinetic energy associated to net directed rotation, as well as the intrinsic work based on the exerted torque under autonomous operation, and we compare them to the energy output for the case of an external dissipative load and for externally driven engine cycles. Our results connect work definitions from both physical and information-theoretical perspectives. In particular, we find that apart from signatures of angular momentum quantization, the ergotropy is consistent with the intuitive notion of work in the form of net directed motion. It also agrees with the energy output to an external load or agent under optimal conditions. This sets forth a consistent thermodynamical description of rotating quantum motors, flywheels, and clocks.

quant-ph↗

arXiv2017

Autonomous Rotor Heat Engine

The triumph of heat engines is their ability to convert the disordered energy of thermal sources into useful mechanical motion. In recent years, much effort has been devoted to generalizing thermodynamic notions to the quantum regime, partly motivated by the promise of surpassing classical heat engines. Here, we instead adopt a bottom-up approach: we propose a realistic autonomous heat engine that can serve as a testbed for quantum effects in the context of thermodynamics. Our model draws inspiration from actual piston engines and is built from closed-system Hamiltonians and weak bath coupling terms. We analytically derive the performance of the engine in the classical regime via a set of nonlinear Langevin equations. In the quantum case, we perform numerical simulations of the master equation. Finally, we perform a dynamic and thermodynamic analysis of the engine's behaviour for several parameter regimes in both the classical and quantum case, and find that the latter exhibits a consistently lower efficiency due to additional noise.

quant-ph↗