arXiv subjects

Stephan Hageboeck

Publications and source records attributed to Stephan Hageboeck.

10 recordsLinked to original sources

arXiv2023

Madgraph5_aMC@NLO on GPUs and vector CPUs Experience with the first alpha release

Madgraph5_aMC@NLO is one of the most-frequently used Monte-Carlo event generators at the LHC, and an important consumer of compute resources. The software has been reengineered to maintain the overall look and feel of the user interface while speeding up event generation on CPUs and GPUs. The most computationally intensive part, the calculation of "matrix elements", is offloaded to new implementations optimised for GPUs and for CPU vector instructions, using event-level data parallelism. We present the work to support accelerated leading-order QCD processes, and discuss how this work is going to be released to Madgraph5_aMC@NLO's users.

physics.comp-ph↗

arXiv2022

Second Analysis Ecosystem Workshop Report

The second workshop on the HEP Analysis Ecosystem took place 23-25 May 2022 at IJCLab in Orsay, to look at progress and continuing challenges in scaling up HEP analysis to meet the needs of HL-LHC and DUNE, as well as the very pressing needs of LHC Run 3 analysis. The workshop was themed around six particular topics, which were felt to capture key questions, opportunities and challenges. Each topic arranged a plenary session introduction, often with speakers summarising the state-of-the art and the next steps for analysis. This was then followed by parallel sessions, which were much more discussion focused, and where attendees could grapple with the challenges and propose solutions that could be tried. Where there was significant overlap between topics, a joint discussion between them was arranged. In the weeks following the workshop the session conveners wrote this document, which is a summary of the main discussions, the key points raised and the conclusions and outcomes. The document was circulated amongst the participants for comments before being finalised here.

hep-ex↗

arXiv2021

When Two Worlds Collide: Using Particle Physics Tools to Visualize the Limit Order Book

We introduce a methodology to visualize the limit order book (LOB) using a particle physics lens. Open-source data-analysis tool ROOT, developed by CERN, is used to reconstruct and visualize futures markets. Message-based data is used, rather than snapshots, as it offers numerous visualization advantages. The visualization method can include multiple variables and markets simultaneously and is not necessarily time dependent. Stakeholders can use it to visualize high-velocity data to gain a better understanding of markets or effectively monitor markets. In addition, the method is easily adjustable to user specifications to examine various LOB research topics, thereby complementing existing methods.

q-fin.TR↗

arXiv2021

Software Training in HEP

Long term sustainability of the high energy physics (HEP) research software ecosystem is essential for the field. With upgrades and new facilities coming online throughout the 2020s this will only become increasingly relevant throughout this decade. Meeting this sustainability challenge requires a workforce with a combination of HEP domain knowledge and advanced software skills. The required software skills fall into three broad groups. The first is fundamental and generic software engineering (e.g. Unix, version control,C++, continuous integration). The second is knowledge of domain specific HEP packages and practices (e.g., the ROOT data format and analysis framework). The third is more advanced knowledge involving more specialized techniques. These include parallel programming, machine learning and data science tools, and techniques to preserve software projects at all scales. This paper dis-cusses the collective software training program in HEP and its activities led by the HEP Software Foundation (HSF) and the Institute for Research and Innovation in Software in HEP (IRIS-HEP). The program equips participants with an array of software skills that serve as ingredients from which solutions to the computing challenges of HEP can be formed. Beyond serving the community by ensuring that members are able to pursue research goals, this program serves individuals by providing intellectual capital and transferable skills that are becoming increasingly important to careers in the realm of software and computing, whether inside or outside HEP

hep-ex↗

arXiv2021

Design and engineering of a simplified workflow execution for the MG5aMC event generator on GPUs and vector CPUs

Physics event generators are essential components of the data analysis software chain of high energy physics experiments, and important consumers of their CPU resources. Improving the software performance of these packages on modern hardware architectures, such as those deployed at HPC centers, is essential in view of the upcoming HL-LHC physics programme. In this paper, we describe an ongoing activity to reengineer the Madgraph5_aMC@NLO physics event generator, primarily to port it and allow its efficient execution on GPUs, but also to modernize it and optimize its performance on vector CPUs. We describe the motivation, engineering process and software architecture design of our developments, as well as the current challenges and future directions for this project. This paper is based on our submission to vCHEP2021 in March 2021,complemented with a few preliminary results that we presented during the conference. Further details and updated results will be given in later publications.

physics.comp-ph↗

arXiv2021

What the new RooFit can do for your analysis

RooFit is a toolkit for statistical modelling and fitting, and together with RooStats it is used for measurements and statistical tests by most experiments in particle physics. Since one year, RooFit is being modernised. In this talk, improvements already released with ROOT will be discussed, such as faster data loading, vectorised computations and more standard-like interfaces. These allow for speeding up unbinned fits by several factors, and make RooFit easier to use from both C++ and Python.

physics.data-an↗

arXiv2020

HL-LHC Computing Review: Common Tools and Community Software

Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this document we address the issues for software that is used in multiple experiments (usually even more widely than ATLAS and CMS) and maintained by teams of developers who are either not linked to a particular experiment or who contribute to common software within the context of their experiment activity. We also give space to general considerations for future software and projects that tackle upcoming challenges, no matter who writes it, which is an area where community convergence on best practice is extremely useful.

physics.comp-ph↗

arXiv2020

A Faster, More Intuitive RooFit

RooFit and RooStats, the toolkits for statistical modelling in ROOT, are used in most searches and measurements at the Large Hadron Collider as well as at $B$ factories. Larger datasets to be collected at e.g. the High-Luminosity LHC will enable measurements with higher precision, but will require faster data processing to keep fitting times stable. In this work, a simplification of RooFit's interfaces and a redesign of its internal dataflow is presented. Interfaces are being extended to look and feel more STL-like to be more accessible both from C++ and Python to improve interoperability and ease of use, while maintaining compatibility with old code. The redesign of the dataflow improves cache locality and data loading, and can be used to process batches of data with vectorised SIMD computations. This reduces the time for computing unbinned likelihoods by a factor four to 16. This will allow to fit larger datasets of the future in the same time or faster than today's fits.

cs.MS↗

arXiv2020

Software Challenges For HL-LHC Data Analysis

The high energy physics community is discussing where investment is needed to prepare software for the HL-LHC and its unprecedented challenges. The ROOT project is one of the central software players in high energy physics since decades. From its experience and expectations, the ROOT team has distilled a comprehensive set of areas that should see research and development in the context of data analysis software, for making best use of HL-LHC's physics potential. This work shows what these areas could be, why the ROOT team believes investing in them is needed, which gains are expected, and where related work is ongoing. It can serve as an indication for future research proposals and cooperations.

physics.data-an↗

arXiv2020

Making RooFit Ready for Run 3

RooFit and RooStats, the toolkits for statistical modelling in ROOT, are used in most searches and measurements at the Large Hadron Collider. The data to be collected in Run 3 will enable measurements with higher precision and models with larger complexity, but also require faster data processing. In this work, first results on modernising RooFit's collections, restructuring data flow and vectorising likelihood fits in RooFit will be discussed. These improvements will enable the LHC experiments to process larger datasets without having to compromise with respect to model complexity, as fitting times would increase significantly with the large datasets to be expected in Run 3.

cs.MS↗