arXiv subjects

Stephan M. Birkmann

Publications and source records attributed to Stephan M. Birkmann.

At least 19 recordsLinked to original sources

arXiv2024

Atmospheric retrievals suggest the presence of a secondary atmosphere and possible sulfur species on L 98-59 d from JWST NIRSpec G395H transmission spectroscopy

L 98-59 d is a Super-Earth planet orbiting an M-type star. We performed retrievals on the transmission spectrum of L 98-59 d obtained using NIRSpec G395H during a single transit, from JWST Cycle 1 GTO 1224. The wavelength range of this spectrum allows us to detect the presence of several atmospheric species. We found that the spectrum is consistent with a high mean molecular weight atmosphere. The atmospheric spectrum indicates the possible presence of the sulfur-bearing species H$_2$S and SO$_2$, which could hint at active volcanism on this planet if verified by future observations. We also tested for signs of stellar contamination in the spectrum, and found signs of unocculted faculae on the star. The tentative signs of an atmosphere on L 98-59 d presented in this work from just one transit bodes well for possible molecular detections in the future, particularly as it is one of the best targets among small exoplanets for atmospheric characterization using JWST.

astro-ph.EP↗

arXiv2024

Hints of a sulfur-rich atmosphere around the 1.6 R$_{\oplus}$ Super-Earth L98-59 d from JWST NIRSpec G395H transmission spectroscopy

Detecting atmospheres around planets with a radius below 1.6 R$_{\oplus}$, commonly referred to as rocky planets (Rogers_2015, Rogers_2021), has proven to be challenging. However, rocky planets orbiting M-dwarfs are ideal candidates due to their favorable planet-to-star radius ratio. Here, we present one transit observation of the Super-Earth L98-59d (1.58 R$_{\oplus}$, 2.31 M$_{\oplus}$), at the limit of rocky/gas-rich, using the JWST NIRSpec G395H mode covering the 2.8 to 5.1 microns wavelength range. The extracted transit spectrum from a single transit observation deviates from a flat line by 2.6 to 5.6$\sigma$, depending on the data reduction and retrieval setup. The hints of an atmospheric detection are driven by a large absorption feature between 3.3 to 4.8 microns. A stellar contamination retrieval analysis rejected the source of this feature as being due to stellar inhomogeneities, making the best fit an atmospheric model including sulfur-bearing species, suggesting that the atmosphere of L98-59d may not be at equilibrium. This result will need to be confirmed by the analysis of the second NIRSpec G395H visit in addition to the NIRISS SOSS transit observation.

astro-ph.EP↗

arXiv2024

Latitudinal Asymmetry in the Dayside Atmosphere of WASP-43b

We present two-dimensional near-infrared temperature maps of the canonical hot Jupiter WASP-43b using a phase-curve observation with JWST NIRSpec/G395H. From the white-light planetary transit, we improve constraints on the planet's orbital parameters and measure a planet-to-star radius ratio of $0.15883^{+0.00056}_{-0.00053}$. Using the white-light phase curve, we measure a longitude of maximum brightness of $6.9^{+0^\circ.5}_{-0^\circ.5}$ east of the substellar point and a phase-curve offset of $10.0^{+0^\circ.8}_{-0^\circ.8}$. We also find an $\approx4\sigma$ detection of a latitudinal hotspot offset of $-13.4^{+3^\circ.2}_{-1^\circ.7}$, the first significant detection of a non-equatorial hotspot in an exoplanet atmosphere. We show that this detection is robust to variations within planetary parameter uncertainties, but only if the transit is used to improve constraints, showing the importance of transit observations to eclipse mapping. Maps retrieved from the NRS1 and NRS2 detectors are similar, with hotspot locations consistent between the two detectors at the $1\sigma$ level. Our JWST data show brighter (hotter) nightsides and a dimmer (colder) dayside at the shorter wavelengths relative to fits to \textit{Spitzer} 3.6 and 4.5 \microns\ phase curves. Through comparison between our phase curves and a set of general circulation models, we find evidence for clouds on the nightside and atmospheric drag or high metallicity reducing the eastward hotspot offset.

astro-ph.EP↗

arXiv2024

A warm Neptune's methane reveals core mass and vigorous atmospheric mixing

Observations of transiting gas giant exoplanets have revealed a pervasive depletion of methane, which has only recently been identified atmospherically. The depletion is thought to be maintained by disequilibrium processes such as photochemistry or mixing from a hotter interior. However, the interiors are largely unconstrained along with the vertical mixing strength and only upper limits on the CH$_4$ depletion have been available. The warm Neptune WASP-107 b stands out among exoplanets with an unusually low density, reported low core mass, and temperatures amenable to CH$_4$ though previous observations have yet to find the molecule. Here we present a JWST NIRSpec transmission spectrum of WASP-107 b which shows features from both SO$_2$ and CH$_4$ along with H$_2$O, CO$_2$, and CO. We detect methane with 4.2$σ$ significance at an abundance of 1.0$\pm$0.5 ppm, which is depleted by 3 orders of magnitude relative to equilibrium expectations. Our results are highly constraining for the atmosphere and interior, which indicate the envelope has a super-solar metallicity of 43$\pm$8$\times$ solar, a hot interior with an intrinsic temperature of T$_{\rm int}$=460$\pm$40 K, and vigorous vertical mixing which depletes CH4 with a diffusion coefficient of Kzz = 10$^{11.6\pm0.1}$ cm$^2$/s. Photochemistry has a negligible effect on the CH$_4$ abundance, but is needed to account for the SO$_2$. We infer a core mass of 11.5$_{-3.6}^{+3.0}$ M$_{\odot}$, which is much higher than previous upper limits, releasing a tension with core-accretion models.

astro-ph.EP↗

arXiv2022

Spectroscopic Time-series Performance of JWST/NIRSpec from Commissioning Observations

We report on JWST commissioning observations of the transiting exoplanet HAT-P-14 b, obtained using the Bright Object Time Series (BOTS) mode of the NIRSpec instrument with the G395H/F290LP grating/filter combination ($3-5μ$m). While the data were used primarily to verify that the NIRSpec BOTS mode is working as expected, and to enable it for general scientific use, they yield a precise transmission spectrum which we find is featureless down to the precision level of the instrument, consistent with expectations given HAT-P-14~b's small scale-height and hence expected atmospheric features. The exquisite quality and stability of the \emph{JWST/NIRSpec} transit spectrum -- almost devoid of any systematic effects -- allowed us to obtain median uncertainties of 50-60 ppm in this wavelength range at a resolution of $R=100$ in a single exposure, which is in excellent agreement with pre-flight expectations and close to the (or at the) photon-noise limit for a $J = 9.094$, F-type star like HAT-P-14. These observations showcase the ability of NIRSpec/BOTS to perform cutting-edge transiting exoplanet atmospheric science, setting the stage for observations and discoveries to be made in Cycle 1 and beyond.

astro-ph.EP↗

arXiv2022

The In-Flight Noise Performance of the JWST/NIRSpec Detector System

The Near-Infrared Spectrograph (NIRSpec) is one the four focal plane instruments on the James Webb Space Telescope (JWST) which was launched on December 25, 2021. We present the in-flight status and performance of NIRSpec's detector system as derived from the instrument commissioning data. The instrument features two 2048 x 2048 HAWAII-2RG sensor chip assemblies (SCAs) that are operated at a temperature of about 42.8 K and are read out via a pair of SIDECAR ASICs. NIRSpec supports "Improved Reference Sampling and Subtraction" (IRS2) readout mode that was designed to meet NIRSpec's stringent noise requirements and to reduce 1/f and correlated noise. In addition, NIRSpec features subarrays optimized for bright object time series observations, e.g. for the observation of exoplanet transit around bright host stars. We focus on the dark signal as well as the read and total noise performance of the detectors.

astro-ph.IM↗

arXiv2022

Identification of carbon dioxide in an exoplanet atmosphere

Carbon dioxide (CO2) is a key chemical species that is found in a wide range of planetary atmospheres. In the context of exoplanets, CO2 is an indicator of the metal enrichment (i.e., elements heavier than helium, also called "metallicity"), and thus formation processes of the primary atmospheres of hot gas giants. It is also one of the most promising species to detect in the secondary atmospheres of terrestrial exoplanets. Previous photometric measurements of transiting planets with the Spitzer Space Telescope have given hints of the presence of CO2 but have not yielded definitive detections due to the lack of unambiguous spectroscopic identification. Here we present the detection of CO2 in the atmosphere of the gas giant exoplanet WASP-39b from transmission spectroscopy observations obtained with JWST as part of the Early Release Science Program (ERS). The data used in this study span 3.0 to 5.5 μm in wavelength and show a prominent CO2 absorption feature at 4.3 μm (26σ significance). The overall spectrum is well matched by one-dimensional, 10x solar metallicity models that assume radiative-convective-thermochemical equilibrium and have moderate cloud opacity. These models predict that the atmosphere should have water, carbon monoxide, and hydrogen sulfide in addition to CO2, but little methane. Furthermore, we also tentatively detect a small absorption feature near 4.0 μm that is not reproduced by these models.

astro-ph.EP↗

arXiv2022

In-flight performance and calibration of the Grating Wheel Assembly sensors (NIRSpec/JWST)

The Near-Infrared Spectrograph (NIRSpec) on board of the James Webb Space Telescope will be the first multi-object spectrograph in space offering ~250,000 configurable micro-shutters, apart from being equipped with an integral field unit and fixed slits. At its heart, the NIRSpec grating wheel assembly is a cryogenic mechanism equipped with six dispersion gratings, a prism, and a mirror. The finite angular positioning repeatability of the wheel causes small but measurable displacements of the light beam on the focal plane, precluding a static solution to predict the light-path. To address that, two magneto-resistive position sensors are used to measure the tip and tilt displacement of the selected GWA element each time the wheel is rotated. The calibration of these sensors is a crucial component of the model-based approach used for NIRSpec for calibration, spectral extraction, and target placement in the micro-shutters. In this paper, we present the results of the evolution of the GWA sensors performance and calibration from ground to space environments.

astro-ph.IM↗

arXiv2022

Astrometric and Wavelength Calibration of the NIRSpec Instrument during Commissioning using a model-based approach

The NIRSpec instrument for the James Webb Space Telescope (JWST) is a highly versatile near-infrared spectrograph that can be operated in various observing modes, slit apertures, and spectral resolutions. Obtaining dedicated calibration data for all possible combinations of aperture and disperser is an intractable task. We have therefore developed a procedure to derive a highly realistic model of the instrument's optical geometry across the entire field of view, using calibration data acquired through only a subset of NIRSpec apertures, which nevertheless allows the light paths within the spectrograph to be accurately computed for all apertures and all observing modes. This parametric instrument model thus provides the basis for the extraction of wavelength-calibrated spectra from any NIRSpec exposure, regardless of observing mode or aperture used. Optimizing the NIRSpec instrument model and deriving its final wavelength and astrometric calibration was one of the most crucial elements of the NIRSpec commissioning phase. Here, we describe the process of re-fitting the NIRSpec instrument model with in-orbit commissioning data, and present its final performance in terms of wavelength accuracy and astrometric calibration.

astro-ph.IM↗

arXiv2022

In-flight performance of the NIRSpec Micro Shutter Array

The NIRSpec instrument on the James Webb Space Telescope (JWST) brings the first multi-object spectrograph (MOS) into space, enabled by a programmable Micro Shutter Array (MSA) of ~250,000 individual apertures. During the 6-month Commissioning period, the MSA performed admirably, completing ~800 reconfigurations with an average success rate of ~96% for commanding shutters open in science-like patterns. We show that 82.5% of the unvignetted shutter population is usable for science, with electrical short masking now the primary cause of inoperable apertures. In response, we propose a plan to recheck existing shorts during nominal operations, which is expected to reduce the number of affected shutters. We also present a full assessment of the Failed Open and Failed Closed shutter populations, which both show a marginal increase in line with predictions from ground testing. We suggest an amendment to the Failed Closed shutter flagging scheme to improve flexibility for MSA configuration planning. Overall, the NIRSpec MSA performed very well during Commissioning, and the MOS mode was declared ready for science operations on schedule.

astro-ph.IM↗

arXiv2022

In-orbit Commissioning of the Near-Infrared Spectrograph on the James Webb Space Telescope

The Near-Infrared Spectrograph (NIRSpec) is one of the four focal plane instruments on the James Webb Space Telescope which was launched on Dec. 25, 2021. We present an overview of the as-run NIRSpec commissioning campaign, with particular emphasis on the sequence of activities that led to the verification of all hardware components of NIRSpec. We also discuss the mechanical, thermal, and operational performance of NIRSpec, as well as the readiness of all NIRSpec observing modes for use in the upcoming JWST science program.

astro-ph.IM↗

arXiv2018

Preparing the NIRSpec/JWST science data calibration: from ground testing to sky

The Near-Infrared Spectrograph (NIRSpec) is one of four instruments aboard the James Webb Space Telescope (JWST). NIRSpec is developed by ESA with AIRBUS Defence & Space as prime contractor. The calibration of its various observing modes is a fundamental step to achieve the mission science goals and provide users with the best quality data from early on in the mission. Extensive testing of NIRSpec on the ground, aided by a detailed model of the instrument, allow us to derive initial corrections for the foreseeable calibrations. We present a snapshot of the current calibration scheme that will be revisited once JWST is in orbit.

astro-ph.IM↗

arXiv2016

A model-based approach to the spatial and spectral calibration of NIRSpec onboard JWST

Context: The NIRSpec instrument for the James Webb Space Telescope (JWST) can be operated in multiobject (MOS), long-slit, and integral field (IFU) mode with spectral resolutions from 100 to 2700. Its MOS mode uses about a quarter of a million individually addressable minislits for object selection, covering a field of view of $\sim$9 $\mathrm{arcmin}^2$. Aims: The pipeline used to extract wavelength-calibrated spectra from NIRSpec detector images relies heavily on a model of NIRSpec optical geometry. We demonstrate how dedicated calibration data from a small subset of NIRSpec modes and apertures can be used to optimize this parametric model to the necessary levels of fidelity. Methods: Following an iterative procedure, the initial fiducial values of the model parameters are manually adjusted and then automatically optimized, so that the model predicted location of the images and spectral lines from the fixed slits, the IFU, and a small subset of the MOS apertures matches their measured location in the main optical planes of the instrument. Results: The NIRSpec parametric model is able to reproduce the spatial and spectral position of the input spectra with high fidelity. The intrinsic accuracy (1-sigma, RMS) of the model, as measured from the extracted calibration spectra, is better than 1/10 of a pixel along the spatial direction and better than 1/20 of a resolution element in the spectral direction for all of the grating-based spectral modes. This is fully consistent with the corresponding allocation in the spatial and spectral calibration budgets of NIRSpec.

astro-ph.IM↗

arXiv2016

Transiting Exoplanet Studies and Community Targets for JWST's Early Release Science Program

The James Webb Space Telescope will revolutionize transiting exoplanet atmospheric science due to its capability for continuous, long-duration observations and its larger collecting area, spectral coverage, and spectral resolution compared to existing space-based facilities. However, it is unclear precisely how well JWST will perform and which of its myriad instruments and observing modes will be best suited for transiting exoplanet studies. In this article, we describe a prefatory JWST Early Release Science (ERS) program that focuses on testing specific observing modes to quickly give the community the data and experience it needs to plan more efficient and successful future transiting exoplanet characterization programs. We propose a multi-pronged approach wherein one aspect of the program focuses on observing transits of a single target with all of the recommended observing modes to identify and understand potential systematics, compare transmission spectra at overlapping and neighboring wavelength regions, confirm throughputs, and determine overall performances. In our search for transiting exoplanets that are well suited to achieving these goals, we identify 12 objects (dubbed "community targets") that meet our defined criteria. Currently, the most favorable target is WASP-62b because of its large predicted signal size, relatively bright host star, and location in JWST's continuous viewing zone. Since most of the community targets do not have well-characterized atmospheres, we recommend initiating preparatory observing programs to determine the presence of obscuring clouds/hazes within their atmospheres. Measurable spectroscopic features are needed to establish the optimal resolution and wavelength regions for exoplanet characterization. Other initiatives from our proposed ERS program include testing the instrument brightness limits and performing phase-curve observations.(Abridged)

astro-ph.EP↗

arXiv2011

Resolving the inner regions of the HD97048 circumstellar disk with VLT/NACO polarimetric differential imaging

Circumstellar disks are the cradles of planetary systems and their physical and chemical properties directly influence the planet formation process. As most planets supposedly form in the inner disk regions, i.e., within a few tens of AU, it is crucial to study circumstellar disk on these scales to constrain the conditions for planet formation. Our aims are to characterize the inner regions of the circumstellar disk around the young Herbig Ae/Be star HD97048 in polarized light. We use VLT/NACO to observe HD97048 in polarimetric differential imaging (PDI) mode in the H and Ks band. We spatially resolve the disk around HD97048 in polarized flux in both filters on scales between ~0.1"-1.0" corresponding to the inner ~16-160 AU. Fitting isophots to the flux calibrated H-band image between 13 - 14 mag/arcsec^2 and 14 - 15 mag/arcsec^2 we derive a apparent disk inclination angle of 34+-5 deg and 47+-2 deg, respectively. The disk position angle in both brightness regimes is almost identical and roughly 80 deg. Along the disk major axis the surface brightness of the polarized flux drops from ~11 mag/arcsec^2 at ~0.1" (~16 AU) to ~15.3 mag/arcsec^2 at ~1.0" (~160 AU). The brightness profiles along the major axis are fitted with power-laws falling off as ~r^(-1.78+-0.02) in H and ~r^(-2.34+-0.04) in Ks. As the surface brightness drops off more rapidly in Ks compared to H the disks becomes relatively bluer at larger separations possibly indicating changing dust grain properties as a function of radius. For the first time the inner ~0.1"-1.0" (~16-160 AU) of the surface layer of the HD97048 circumstellar disk have been imaged in scattered light demonstrating the power of ground-based imaging polarimetry. Our data fill an important gap in a large collection of existing data including resolved thermal dust and PAH emission images as well as resolved gas emission lines.

astro-ph.GA↗

arXiv2010

A large, massive, rotating disk around an isolated young stellar object

We present multi-wavelengths observations and a radiative transfer model of a newly discovered massive circumstellar disk of gas and dust which is one of the largest disks known today. Seen almost edge-on, the disk is resolved in high-resolution near-infrared (NIR) images and appears as a dark lane of high opacity intersecting a bipolar reflection nebula. Based on molecular line observations we estimate the distance to the object to be 3.5 kpc. This leads to a size for the dark lane of ~10500 AU but due to shadowing effects the true disk size could be smaller. In Spitzer/IRAC 3.6 micron images the elongated shape of the bipolar reflection nebula is still preserved and the bulk of the flux seems to come from disk regions that can be detected due to the slight inclination of the disk. At longer IRAC wavelengths, the flux is mainly coming from the central regions penetrating directly through the dust lane. Interferometric observations of the dust continuum emission at millimeter wavelengths with the SMA confirm this finding as the peak of the unresolved mm-emission coincides perfectly with the peak of the Spitzer/IRAC 5.8 micron flux and the center of the dark lane seen in the NIR images. Simultaneously acquired CO data reveal a molecular outflow along the northern part of the reflection nebula which seems to be the outflow cavity. An elongated gaseous disk component is also detected and shows signs of rotation. The emission is perpendicular to the molecular outflow and thus parallel to but even more extended than the dark lane in the NIR images. Based on the dust continuum and the CO observations we estimate a disk mass of up to a few solar masses depending on the underlying assumptions. Whether the disk-like structure is an actual accretion disk or rather a larger-scale flattened envelope or pseudodisk is difficult to discriminate with the current dataset (abridged).

astro-ph.SR↗

arXiv2008

Star-forming cores embedded in a massive cold clump: Fragmentation, collapse and energetic outflows

The fate of massive cold clumps, their internal structure and collapse need to be characterised to understand the initial conditions for the formation of high-mass stars, stellar systems, and the origin of associations and clusters. We explore the onset of star formation in the 75 M_sun SMM1 clump in the region ISOSS J18364-0221 using infrared and (sub-)millimetre observations including interferometry. This contracting clump has fragmented into two compact cores SMM1 North and South of 0.05 pc radius, having masses of 15 and 10 M_sun, and luminosities of 20 and 180 L_sun. SMM1 South harbours a source traced at 24 and 70um, drives an energetic molecular outflow, and appears supersonically turbulent at the core centre. SMM1 North has no infrared counterparts and shows lower levels of turbulence, but also drives an outflow. Both outflows appear collimated and parsec-scale near-infrared features probably trace the outflow-powering jets. We derived mass outflow rates of at least 4E-5 M_sun/yr and outflow timescales of less than 1E4 yr. Our HCN(1-0) modelling for SMM1 South yielded an infall velocity of 0.14 km/s and an estimated mass infall rate of 3E-5 M_sun/yr. Both cores may harbour seeds of intermediate- or high-mass stars. We compare the derived core properties with recent simulations of massive core collapse. They are consistent with the very early stages dominated by accretion luminosity.

astro-ph↗

arXiv2008

Cold performance tests of blocked-impurity-band Si:As detectors developed for DARWIN

We report first results of laboratory tests of Si:As blocked-impurity-band (BIB) mid-infrared (4 to 28 um) detectors developed by IMEC. These prototypes feature 88 pixels hybridized on an integrated cryogenic readout electronics (CRE). They were developed as part of a technology demonstration program for the future DARWIN mission. In order to be able to separate detector and readout effects, a custom build TIA circuitry was used to characterize additional single pixel detectors. We used a newly designed test setup at the MPIA to determine the relative spectral response, the quantum efficiency, and the dark current. All these properties were measured as a function of operating temperature and detector bias. In addition the effects of ionizing radiation on the detector were studied. For determining the relative spectral response we used a dual-grating monochromator and a bolometer with known response that was operated in parallel to the Si:As detectors. The quantum efficiency was measured by using a custom-build high-precision vacuum black body together with cold (T ~ 4 K) filters of known (measured) transmission.

physics.ins-det↗