SearcharxivSearch

arXiv subjects

Stephanie C. Malek

Publications and source records attributed to Stephanie C. Malek.

9 recordsLinked to original sources

Thermally-Switchable Metalenses Based on Quasi-Bound States in the Continuum

Dynamic wavefront shaping with optical metasurfaces has presented a major challenge and inspired a large number of highly elaborate solutions. Here, we experimentally demonstrate thermo-optically reconfigurable, nonlocal metasurfaces using simple device architectures and conventional CMOS-compatible dielectric materials. These metasurfaces support quasi-bound states in the continuum (q-BICs) derived from symmetry breaking and encoded with a spatially varying geometric phase, such that they shape optical wavefront exclusively on spectrally narrowband resonances. Due to the enhanced light-matter interaction enabled by the resonant q-BICs, a slight variation of the refractive index introduced by heating and cooling the entire device leads to a substantial shift of the resonant wavelength and a subsequent change to the optical wavefront associated with the resonance. We experimentally demonstrate a metalens modulator, the focusing capability of which can be thermally turned on and off, and reconfigurable metalenses, which can be thermo-optically switched to produce two distinct focal patterns. Our devices offer a pathway to realize reconfigurable, multifunctional meta-optics using established manufacturing processes and widely available dielectric materials that are conventionally not considered "active" materials due to their small thermo-optic or electro-optic coefficients.

physics.optics

Leaky-wave metasurfaces for integrated photonics

Metasurfaces have been rapidly advancing our command over the many degrees of freedom of light within compact, lightweight devices. However, so far, they have mostly been limited to manipulating light in free space. Grating couplers provide the opportunity of bridging far-field optical radiation and in-plane guided waves, and thus have become fundamental building blocks in photonic integrated circuits. However, their operation and degree of light control is much more limited than metasurfaces. Metasurfaces integrated on top of guided wave photonic systems have been explored to control the scattering of light off-chip with enhanced functionalities - namely, point-by-point manipulation of amplitude, phase or polarization. However, these efforts have so far been limited to controlling one or two optical degrees of freedom at best, and to device configurations much more complex compared to conventional grating couplers. Here, we introduce leaky-wave metasurfaces, which are based on symmetry-broken photonic crystal slabs that support quasi-bound states in the continuum. This platform has a compact form factor equivalent to the one of conventional grating couplers, but it provides full command over amplitude, phase and polarization (four optical degrees of freedom) across large apertures. We present experimental demonstrations of various functionalities for operation at wavelengths near 1.55 microns based on leaky-wave metasurfaces, including devices for phase and amplitude control at a fixed polarization state, and devices controlling all four optical degrees of freedom. Our results merge the fields of guided and free-space optics under the umbrella of metasurfaces, exploiting the hybrid nature of quasi-bound states in the continuum, for opportunities to advance in disruptive ways imaging, communications, augmented reality, quantum optics, LIDAR and integrated photonic systems.

physics.optics

Multifunctional Resonant Wavefront-Shaping Meta-Optics Based on Multilayer and Multi-Perturbation Nonlocal Metasurfaces

Photonic devices rarely provide both elaborate spatial control and sharp spectral control over an incoming wavefront. In optical metasurfaces, for example, the localized modes of individual meta-units govern the wavefront shape over a broad bandwidth, while nonlocal lattice modes extended over many unit cells support high quality-factor resonances. Here, we experimentally demonstrate nonlocal dielectric metasurfaces in the near-infrared that offer both spatial and spectral control of light, realizing metalenses focusing light exclusively over a narrowband resonance while leaving off-resonant frequencies unaffected. Our devices attain this functionality by supporting a quasi-bound state in the continuum encoded with a spatially varying geometric phase. We leverage this capability to experimentally realize a versatile platform for multispectral wavefront shaping where a stack of metasurfaces, each supporting multiple independently controlled quasi-bound states in the continuum, molds the optical wavefront distinctively at multiple wavelengths and yet stay transparent over the rest of the spectrum. Such a platform is scalable to the visible for applications in augmented reality and transparent displays.

physics.optics

Enhanced Harmonic Generation in Gases Using an All-Dielectric Metasurface

Strong field-confinement, long-lifetime resonances, and slow-light effects suggest that meta surfaces are a promising tool for nonlinear optical applications. These nanostructured devices have been utilized for relatively high efficiency solid-state high-harmonic generation platforms, four-wave mixing, and Raman scattering experiments, among others. Here we report the first all-dielectric metasurface to enhance harmonic generation from a surrounding gas, achieving as much as a factor of 45 increase in the overall yield for Argon atoms. When compared to metal nanostructures, dielectrics are more robust against damage for high power applications such as those using atomic gases. We employ dimerized high-contrast gratings fabricated in silicon-on-insulator that support bound states in the continuum, a resonance feature accessible in broken-symmetry planar devices. Our 1D gratings maintain large mode volumes, overcoming one of the more severe limitations of earlier device designs and greatly contributing to enhanced third- and fifth- harmonic generation. The interaction lengths that can be achieved are also significantly greater than the 10's of nm to which earlier solid-state designs were restricted. We perform finite-difference time-domain simulations to fully characterize the wavelength, linewidth, mode profile, and polarization dependence of the resonances. Our experiments confirm these predictions and are consistent with other nonlinear optical properties. The tunable wavelength dependence and quality-factor control we demonstrate in these devices make them an attractive tool for the next generation of high-harmonic sources, which are anticipated to be pumped at longer wavelengths and with lower peak power, higher repetition rate lasers.

physics.optics

Active Nonlocal Metasurfaces

Actively tunable and reconfigurable wavefront shaping by optical metasurfaces poses a significant technical challenge often requiring unconventional materials engineering and nanofabrication. Most wavefront-shaping metasurfaces can be considered 'local' in that their operation depends on the responses of individual meta-units. In contrast, 'nonlocal' metasurfaces function based on the modes supported by many adjacent meta-units, resulting in sharp spectral features but typically no spatial control of the outgoing wavefront. Recently, nonlocal metasurfaces based on quasi-bound states in the continuum have been shown to produce designer wavefronts only across the narrow bandwidth of the supported Fano resonance. Here, we leverage the enhanced light-matter interactions associated with sharp Fano resonances to explore the active modulation of optical spectra and wavefronts by refractive index tuning and mechanical stretching. We experimentally demonstrate proof-of-principle thermo-optically tuned nonlocal metasurfaces made of silicon, and numerically demonstrate nonlocal metasurfaces that thermo-optically switch between distinct wavefront shapes. This meta-optics platform for thermally reconfigurable wavefront-shaping requires neither unusual materials and fabrication nor active control of individual meta-units.

physics.optics

Selection Rules for Quasi-Bound States in the Continuum

Photonic crystal slabs (PCSs) are a well-studied class of devices known to support optical Fano resonances for light normally incident to the slab, useful for narrowband filters, modulators, and nonlinear photonic devices. In shallow-etched PCSs the linewidth of the resonances is easily controlled by tuning the etching depth. This design strength comes at the cost of large device footprint due to the poor in-plane localization of optical energy. In fully-etched PCSs realized in high index contrast material systems, the in-plane localization is greatly improved, but the command over linewidth suffers. This disadvantage in fully-etched PCSs, also known as high contrast gratings (HCGs), can be overcome by accessing symmetry-protected Bound States in the Continuum (BICs). By perturbing an HCG, the BIC may be excited from the free space with quality factor showing an inverse squared dependence on the magnitude of the perturbation, while inheriting the excellent in-plane localization of their unperturbed counterparts. Here, we report an exhaustive catalog of the selection rules (if and to which free space polarization coupling occurs) of symmetry-protected BICs controlled by in-plane symmetry breaking in six types of two-dimensional PCS lattices. The chosen lattices allow access to the three highest symmetry mode classes of unperturbed square and hexagonal PCSs. The restriction to in-plane symmetry breaking allows for manufacturing devices with simple lithographic fabrication techniques in comparison to out-of-plane symmetry breaking, useful for practical applications. The approach reported provides a high-level roadmap for designing PCSs supporting controllable sharp spectral features with minimal device footprints using a mature fabrication platform.

physics.optics

Multifunctional Nonlocal Metasurfaces

Diffractive photonic devices manipulate light via local and nonlocal optical modes. Local devices, such as metasurfaces, can shape a wavefront at multiple selected wavelengths, but inevitably modify light across the spectrum; nonlocal devices, such as grating filters, offer great frequency selectivity but limited spatial control. Here, we introduce a rational design paradigm using quasi-bound states in the continuum to realize multifunctional nonlocal devices: metasurfaces that produce narrowband spatially tailored wavefronts at multiple selected wavelengths and yet are otherwise transparent.

physics.optics

Dielectric Metasurfaces for Complete and Independent Control of Optical Amplitude and Phase

Metasurfaces are optically thin metamaterials that promise complete control of the wavefront of light but are primarily used to control only the phase of light. Here, we present an approach, simple in concept and in practice, that uses meta-atoms with a varying degree of form birefringence and rotation angles to create high-efficiency dielectric metasurfaces that control both the optical amplitude and phase at one or two frequencies. This opens up applications in computer-generated holography, allowing faithful reproduction of both the phase and amplitude of a target holographic scene without the iterative algorithms required in phase-only holography. We demonstrate all-dielectric metasurface holograms with independent and complete control of the amplitude and phase at up to two optical frequencies simultaneously to generate two- and three-dimensional holographic objects. We show that phase-amplitude metasurfaces enable a few features not attainable in phase-only holography; these include creating artifact-free two-dimensional holographic images, encoding phase and amplitude profiles separately at the object plane, encoding intensity profiles at the metasurface and object planes separately, and controlling the surface textures of three-dimensional holographic objects.

physics.optics

Strain multiplexed metasurface holograms on a stretchable substrate

We demonstrate reconfigurable phase-only computer-generated metasurface holograms with one, two, or three image planes operating in the visible regime on a stretchable polydimethylsiloxane substrate. Stretching the substrate enlarges the hologram image and changes the location of the image plane. Upon stretching, these devices can switch the displayed holographic image between multiple distinct images. This work opens up the possibilities for stretchable metasurface holograms as flat devices for dynamically reconfigurable optical communication and display. It also confirms that metasurfaces on stretchable substrates can serve as platform for a variety of reconfigurable optical devices.

physics.optics