arXiv subjects

Stephanie Law

Publications and source records attributed to Stephanie Law.

28 records · Page 2Linked to original sources

arXiv2022

Bi2Se3 Growth on (001) GaAs Substrates for Terahertz Integrated Systems

Terahertz (THz) technologies have been of interest for many years due to the variety of applications including gas sensing, nonionizing imaging of biological systems, security and defense, etc. To date, scientists have used different classes of materials to perform different THz functions. However, to assemble an on-chip THz integrated system, we must understand how to integrate these different materials. Here, we explore the growth of Bi2Se3, a topological insulator (TI) material that could serve as a plasmonic waveguide in THz integrated devices, on technologically-important GaAs (001) substrates. We explore surface treatments and find that atomically smooth GaAs surface is critical to achieving high-quality Bi2Se3 films despite the relatively weak film/substrate interaction. Calculations indicate that the Bi2Se3/GaAs interface is likely selenium-terminated and shows no evidence of chemical bonding between the Bi2Se3 and the substrate. These results are a guide for integrating van der Waals materials with conventional semiconductor substrates and serve as the first steps toward achieving an on-chip THz integrated system.

cond-mat.mtrl-sci↗

arXiv2022

Surface plasmon-phonon-magnon polariton in a topological insulator-antiferromagnetic bilayer structure

We present a robust technique for computationally studying surface polariton modes in hybrid materials. We use a semi-classical model that allows us to understand the physics behind the interactions between collective excitations of the hybrid system and develop a scattering and transfer matrix method that imposes the proper boundary conditions to solve Maxwell equations and derive a general equation describing the surface polariton in a heterostructure consisting of N constituent materials. We apply this method to a test structure composed of a topological insulator (TI) and an antiferromagnetic material (AFM) to study the resulting surface Dirac plasmon-phonon-magnon polariton (DPPMP). We find that interactions between the excitations of the two constituents result in the formation of hybridized modes and the emergence of avoided-crossing points in the dispersion relations for the DPPMP. For the specific case of a Bi2Se3 TI material, the polariton branch with low frequency below 2 THz redshifts upon increasing the thickness of TI thin film, which leads to an upper bound on the thickness of the TI layer that will allow an observable signature of strong coupling and the emergence of hybridized states. We also find that the strength of the coupling between the TI and the AFM, which is parameterized by the amplitude of the avoided-crossing splitting between the two polariton branches at the magnon resonance frequency, depends on the magnitude of the magnetic dipole and the line width of the magnon in the AFM material as well as on the Fermi energy of Dirac plasmon in the TI. Finally, we predict that materials with extremely high quality, i.e. low scattering loss rate, are essential to achieve an experimentally-observable strong coupling between a TI and AFM.

cond-mat.mtrl-sci↗

arXiv2022

Real-space nanoimaging of THz polaritons in the topological insulator Bi2Se3

Plasmon polaritons in topological insulators attract attention from a fundamental perspective and for potential THz photonic applications. Although polaritons have been observed by THz far-field spectroscopy on topological insulator microstructures, real-space imaging of propagating THz polaritons has been elusive so far. Here, we show spectroscopic THz near-field images of thin Bi2Se3 layers (prototypical topological insulators) revealing polaritons with up to 12 times increased momenta as compared to photons of the same energy and decay times of about 0.48 ps, yet short propagation lengths. From the images we determine and analyze the polariton dispersion, showing that the polaritons can be explained by the coupling of THz radiation to various combinations of Dirac and massive carriers at the Bi2Se3 surfaces, massive bulk carriers and optical phonons. Our work provides critical insights into the nature of THz polaritons in topological insulators and establishes instrumentation and methodology for imaging of THz polaritons.

physics.optics↗

arXiv2022

Strong coupling between a topological insulator and a III-V heterostructure at terahertz frequency

We probe theoretically the emergence of strong coupling in a system consisting of a topological insulator (TI) and a III-V heterostructure using a numerical approach based on the scattering matrix formalism. Specifically, we investigate the interactions between terahertz excitations in a structure composed of Bi$_{2}$Se$_{3}$ and GaAs materials. We find that the interaction between the Bi$_{2}$Se$_{3}$ layer and AlGaAs/GaAs quantum wells with intersubband transitions (ISBTs) in the terahertz frequency regime creates new hybrid modes, namely Dirac plasmon-phonon-ISBT polaritons. The formation of these hybrid modes results in anti-crossings (spectral mode splitting) whose magnitude is an indication of the strength of the coupling. By varying the structural parameters of the constituent materials, our numerical calculations reveal that the magnitude of splitting depends strongly on the doping level and the scattering rate in the AlGaAs/GaAs quantum wells, as well as on the thickness of the GaAs spacer layer that separates the quantum-well structure from the TI layer. Our results reveal the material and device parameters required to obtain experimentally-observable signatures of strong coupling. Our model includes the contribution of an extra two-dimensional hole gas (2DHG) that is predicted to arise at the Bi$_{2}$Se$_{3}$/GaAs interface, based on density functional theory (DFT) calculations that explicitly account for details of the atomic terminations at the interface. The presence of this massive 2DHG at the TI/III-V interface shifts the dispersion of the Dirac plasmon-ISBT polaritons to higher frequencies. The damping rate at this interface, in contrast, compensates the effect of the 2DHG. Finally, we observe that the phonon resonances in the TI layer are crucial to the coupling between the THz excitations in the TI and III-V materials.

cond-mat.mtrl-sci↗

arXiv2021

Strong coupling in semiconductor hyperbolic metamaterials

Semiconductor-based layered hyperbolic metamaterials (HMMs) house high-wavevector volume plasmon polariton (VPP) modes in the infrared spectral range. VPP modes have successfully been exploited in the weak-coupling regime through the enhanced Purcell effect. In this paper, we experimentally demonstrate strong coupling between the VPP modes in a semiconductor HMM and the intersubband transition of epitaxially-embedded quantum wells. We observe clear anticrossings in the dispersion curves for the zeroth-, first-, second-, and third-order VPP modes, resulting in upper and lower polariton branches for each mode. This demonstration sets the stage for the creation of novel infrared optoelectronic structures combining HMMs with embedded epitaxial emitter or detector structures.

physics.optics↗

arXiv2021

Optimization of the growth of the van der Waals materials Bi2Se3 and (Bi0.5In0.5)2Se3 by molecular beam epitaxy

The naturally existing chalcogenide Bi2Se3 is topologically nontrivial due to the band inversion caused by strong spin-orbit coupling inside the bulk of the material. The surface states are spin polarized, protected by the time-inversion symmetry, and thus robust to the scattering caused by non-magnetic defects. A high purity topological insulator thin film can be easily grown via molecular beam epitaxy (MBE) on various substrates to enable novel electronics, optics, and spintronics applications. However, the unique surface state properties have historically been limited by the film quality, which is evaluated by crystallinity, surface morphology, and transport data. Here we propose and investigate different MBE growth strategies to improve the quality of Bi2Se3 thin films grown by MBE. In addition, growths of topological trivial insulator (Bi0.5In0.5)2Se3 (BIS) are also investigated. BIS is often used as a buffer layer or separation layer for topological insulator heterostructures. Based on the surface passivation status, we have classified the substrates into two categories, self-passivated or unpassivated, and determine the optimal growth mechanisms on the representative sapphire and GaAs, respectively. Growth temperature is a crucial control parameter for the van der Waals epitaxy for both types of substrates. For Bi2Se3 on GaAs, the surface passivation status determines the dominant growth mechanism.

cond-mat.mtrl-sci↗

arXiv2021

In-Plane Plasmon Coupling in Topological Insulator Bi$_2$Se$_3$ Thin Films

The surface states of the 3D topological insulator (TI), Bi$_2$Se$_3$, are known to host two-dimensional Dirac plasmon polaritons (DPPs) in the terahertz spectral range. In TI thin films, the DPPs excited on the top and bottom surfaces couple, leading to an acoustic and an optical plasmon mode. Vertical coupling in these materials is therefore reasonable well-understood, but in-plane coupling among localized TI DPPs has yet to be investigated. In this paper, we demonstrate in-plane DPP coupling in TI stripe arrays and show that they exhibit dipole-dipole type coupling. The coupling becomes negligible with the lattice constant is greater than approximately 2.8 times the stripe width, which is comparable to results for in-plane coupling of localized plasmons excited on metallic nanoparticles or graphene plasmon polaritons. This understanding could be leveraged for the creation of TI-based metasurfaces.

physics.optics↗

arXiv2021

Interface quality in GaSb/AlSb short period superlattices

Heterostructures including the members of the 6.1Å semiconductor family (AlSb, GaSb, and InAs) are used in infrared optoelectronic devices as well as a variety of other applications. Short-period superlattices of these materials are also of interest for creating composite materials with designer infrared dielectric functions. The conditions needed to create sharp InAs/GaSb and InAs/AlSb interfaces are well known, but the AlSb/GaSb interface is much less well-understood. In this article, we test a variety of interventions designed to improve interface sharpness in AlSb/GaSb short-period superlattices. These interventions include substrate temperature, III:Sb flux ratio, and the use of a bismuth surfactant. Superlattices are characterized by high-resolution x-ray diffraction and infrared spectroscopy. We find that AlSb/GaSb short-period superlattices have a wide growth window over which sharp interfaces can be obtained.

cond-mat.mtrl-sci↗

arXiv2021

Growth of Topological Insulator Bi2Se3 Particles on GaAs via Droplet Epitaxy

The discovery of topological insulators (TIs) and their unique electronic properties has motivated research into a variety of applications, including quantum computing. It has been proposed that TI surface states will be energetically discretized in a quantum dot nanoparticle. These discretized states could then be used as basis states for a qubit that is more resistant to decoherence. In this work, prototypical TI Bi2Se3 nanoparticles are grown on GaAs (001) using the droplet epitaxy technique, and we demonstrate the control of nanoparticle height, area, and density by changing the duration of bismuth deposition and substrate temperature. Within the growth window studied, nanoparticles ranged from 5-15 nm tall with an 8-18nm equivalent circular radius, and the density could be relatively well controlled by changing the substrate temperature and bismuth deposition time.

cond-mat.mes-hall↗

arXiv2021

Self-assembled nano-columns in Bi2Se3 grown by molecular beam epitaxy

Layered van der Waals (vdW) materials grown by physical vapor deposition techniques are generally assumed to have a weak interaction with the substrate during growth. This leads to films with relatively small domains that are usually triangular and a terraced morphology. In this paper, we demonstrate that Bi2Se3, a prototypical vdW material, will form a nano-column morphology when grown on GaAs(001) substrates. This morphology is explained by a relatively strong film/substrate interaction, long adatom diffusion lengths, and a high reactive selenium flux. This discovery paves the way toward growth of self-assembled vdW structures even in the absence of strain.

cond-mat.mtrl-sci↗