arXiv subjects

Stephen Eikenberry

Publications and source records attributed to Stephen Eikenberry.

17 recordsLinked to original sources

arXiv2026

Design and simulation of a photonic lantern-inspired astrophotonic chip for spectral sensing

Compact astrophotonic sensors can trade general-purpose spectral coverage for task-specific wavelength discrimination in a small integrated footprint. Developed with the Mazin Lab at UC Santa Barbara, this chip couples a single-mode input into a multimode interference region and seven-port fanout, producing wavelength-dependent output power fingerprints for spectral retrieval. Using ANSYS Lumerical FDTD simulations in silicon nitride, we compare symmetric and staggered-release geometries and quantify throughput, wavelength-dependent changes in the seven-port output distribution, and sensitivity near a 745 nm design point. We optimize over the tested geometric parameter space and identify designs with improved throughput and wavelength discrimination, including increased throughput-weighted Fisher information relative to the baseline. These results suggest that lantern-inspired integrated photonics can enable compact, task-specific spectral sensors for astrophotonic applications.

astro-ph.IM↗

arXiv2026

Demonstrating the integration of a photonic lantern with an all-fiber-based nulling interferometer

High-contrast imaging of Solar System scale exoplanets and protoplanets demands advancements in instrumentation to access deeper starlight suppression at smaller angular separations than today's state-of-the-art. The multi-mode to single-mode conversion capabilities of photonic lanterns (PLs) provide new avenues to implement techniques such as nulling interferometry due to the inherent spatial filtering of single-mode waveguides. In this work, we present laboratory results on an all-fiber-based focal plane nulling interferometer using off-the-shelf components operating at 1550 nm. We demonstrate the implementation of a PL for coupling light into the instrument, and compare it to the case when laser light is directly fed into the interferometer. The integration of a PL with the interferometer evidences their potential for feeding photonic-based science instruments. Additionally, we discuss expanding the concept of the instrument for the detection of accreting protoplanets.

astro-ph.IM↗

arXiv2025

The Santa Cruz Extreme AO Lab (SEAL) 2.0: A reflective, multi-wavelength rebuild

The Santa cruz Extreme Adaptive optics Lab (SEAL) is a visible/near-infrared wavelength testbed designed to support technology development for high contrast imaging on large, segmented, ground-based telescopes. SEAL saw first light in 2021 as a transmissive, visible-wavelength AO testbed. In this paper, we present four major upgrades to SEAL: (1) the testbed has been rebuilt with custom off-axis parabolic mirrors, enabling operation in both near-infrared and visible wavelengths; (2) the suite of wavefront sensors now includes a Shack-Hartmann, transmissive four-sided pyramid, vector-Zernike, and, in the muirSEAL testbed, a photonic lantern; (3) the testbed includes a vector-vortex coronagraph and will soon include a hybrid astrophotonic coronagraph; (4) in addition to its original Keck-heritage RTC, SEAL now includes two additional control software packages: Catkit, originally developed for the HiCAT testbed at the Space Telescope Science Institute, and the RTC Compute And Control for Adaptive Optics (CACAO), originally designed for Subaru/SCExAO. We discuss the performance of the testbed after the reflective rebuild and on-going technology development work at SEAL.

astro-ph.IM↗

arXiv2025

Exploring the Capabilities of Astrophotonics for the Precise Alignment of Segmented Telescopes

The next generation of large telescopes for direct imaging of exoplanets will require segmented primary mirrors. Over both long and short timescales, these telescopes experience segment misalignments which degrade the final science image. Adaptive optics (AO) systems can be used to correct these aberrations in real time. AO systems require wavefront sensors (WFSs) that measure the phase of the incoming light in order to reconstruct optical aberrations. However, most WFSs used for sensing atmospheric turbulence cannot correctly detect aberrations induced by misalignments in segmented telescopes, as they show poor sensitivity to phase discontinuities. We investigate the potential of photonic lanterns (PLs), which are waveguides that allow for the low-loss transmission from multi-mode to multiple single-mode optical signals, for sensing segment misalignments at the focal plane. We assess the ability of PLs to measure piston offsets in segmented mirrors through both simulations and laboratory experiments. We simulate the photonic lantern and demonstrate linear reconstruction on segment pistons. Further, we train a neural network to reconstruct aberrations outside of the linear regime. We experimentally validate reconstruction of segment piston offsets on the Miniature Infrared SEAL (muirSEAL) testbed, which includes a segmented deformable mirror, a PSF imaging branch, and a PL. This work demonstrates the potential of the PL as a compact WFS for future space- and ground-based segmented-mirror telescopes.

astro-ph.IM↗

arXiv2025

Laser Interferometer Lunar Antenna (LILA): Advancing the U.S. Priorities in Gravitational-wave and Lunar Science

The Laser Interferometer Lunar Antenna (LILA) is a next-generation gravitational-wave (GW) facility on the Moon. By harnessing the Moon's unique environment, LILA fills a critical observational gap in the mid-band GW spectrum ($0.1 - 10$ Hz) between terrestrial detectors (LIGO, Virgo, KAGRA) and the future space mission LISA. Observations enabled by LILA will fundamentally transform multi-messenger astrophysics and GW probes of fundamental physics. LILA will measure the lunar deep interior better than any existing planetary seismic instruments. The LILA mission is designed for phased development aligned with capabilities of the U.S.'s Commercial Lunar Payload Services and Artemis programs. LILA is a unique collaboration between universities, space industries, U.S. government laboratories, and international partners.

gr-qc↗

arXiv2024

Laboratory demonstration of an all-fiber-based focal plane nulling interferometer

Starlight suppression techniques for High-Contrast Imaging (HCI) are crucial to achieving the demanding contrast ratios and inner working angles required for detecting and characterizing exoplanets with a wide range of masses and separations. The advent of photonic technologies provides new opportunities to control the amplitude and phase characteristics of light, with the potential to enhance and control starlight suppression. Here, we present a focal plane optical-fiber-based nulling interferometer working with commercially available components for amplitude and phase modulation. The instrument implements single-mode fiber-coupled elements: a MEMS variable optical attenuator (VOA) matches the on-axis and off-axis starlight amplitude, while a piezoelectric-driven fiber stretcher modifies the optical path difference between the channels to achieve the $π$ phase shift condition for destructive interference. We show preliminary lab results using a narrowband light source working at 632 nm and discuss future opportunities for testing on-sky with the Astrophotonics Advancement Platform at Lick Observatory (APALO) at the Shane 3-m Telescope.

astro-ph.IM↗

arXiv2023

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.

astro-ph.IM↗

arXiv2022

Forecasting cosmic acceleration measurements using the Lyman-$α$ forest

We present results from end-to-end simulations of observations designed to constrain the rate of change in the expansion history of the Universe using the redshift drift of the Lyman-$α$ forest absorption lines along the lines-of-sight toward bright quasars. For our simulations we take Lyman-$α$ forest lines extracted from Keck/HIRES spectra of bright quasars at $z>3$, and compare the results from these real quasar spectra with mock spectra generated via Monte Carlo realizations. We use the results of these simulations to assess the potential for a dedicated observatory to detect redshift drift, and quantify the telescope and spectrograph requirements for these observations. Relative to Liske et al. (2008), two main refinements in the current work are inclusion of quasars from more recent catalogs and consideration of a realistic observing strategy for a dedicated redshift drift experiment that maximizes $\dot{v}/σ_{\dot{v}}$. We find that using a dedicated facility and our designed observing plan, the redshift drift can be detected at $3σ$ significance in 15 years with a 25m telescope, given a spectrograph with long term stability with $R=50,000$ and 25% total system efficiency. To achieve this significance, the optimal number of targets is four quasars, with observing time weighted based upon $\dot{v}/σ_{\dot{v}}$ and object visibility. This optimized strategy leads to a 9% decrease in the telescope diameter or a 6% decrease in the required time to achieve the same S/N as for the idealized case of uniformly distributing time to the same quasars.

astro-ph.CO↗

arXiv2020

An Extremely Bright QSO at $z=2.89$

We report the discovery and confirmation of a bright quasi-stellar object (QSO), 2MASS J13260399+7023462, at $z=2.889$. This QSO is the first spectroscopically confirmed candidate from an ongoing search using the combination of Gaia and WISE photometry to identify bright QSOs at $z>2$, the redshift regime for which the Lyman-$α$ forest is accessible with ground-based facilities. With a Gaia apparent magnitude $G=16.07$, 2MASS J13260399+7023462 is one of the brightest QSOs known at $z>2$, with only 15 currently known brighter QSOs. Given its inferred $M_{1450,AB}$ magnitude and redshift, it is among the most luminous objects in the Universe; the inferred black hole mass and corresponding Eddington ratio are ($2.7 \pm 0.4$) $\times$ 10$^{10}$ M$_{\odot}$ and $1.3 \pm 0.3$, respectively. Follow-up Hubble observations confirm it is not gravitationally lensed.

astro-ph.GA↗

arXiv2019

Astro2020 Science White Paper: Compact Stellar Jets

This paper outlines the importance of understanding jets from compact binaries for the problem of understanding the broader phenomenology of jet production. Because X-ray binaries are nearby and bright, have well-measured system parameters, and vary by factors of $\sim 10^6$ on $\sim$ year timescales, they provide a unique opportunity to understand how various aspects of the jet physics change in response to changes in the accretion flow, giving the possibility of looking for trends within individual systems and testing their universality with other systems, rather than trying to interpret large samples of objects on a statistical basis.

astro-ph.HE↗

arXiv2019

Astro2020 White Paper: A Direct Measure of Cosmic Acceleration

Nearly a century after the discovery that we live in an expanding Universe, and two decades after the discovery of accelerating cosmic expansion, there remains no direct detection of this acceleration via redshift drift - a change in the cosmological expansion velocity versus time. Because cosmological redshift drift directly determines the Hubble parameter H(z), it is arguably the cleanest possible measurement of the expansion history, and has the potential to constrain dark energy models (e.g. Kim et al. 2015). The challenge is that the signal is small - the best observational constraint presently has an uncertainty several orders of magnitude larger than the expected signal (Darling 2012). Nonetheless, direct detection of redshift drift is becoming feasible, with upcoming facilities such as the ESO-ELT and SKA projecting possible detection within two to three decades. This timescale is uncomfortably long given the potential of this cosmological test. With dedicated experiments it should be possible to rapidly accelerate progress and detect redshift drift with only a five-year observational baseline. Such a facility would also be ideal for precision radial velocity measurements of exoplanets, which could be obtained as a byproduct of the ongoing calibration measurements for the experiment.

astro-ph.CO↗

arXiv2018

The Wide Integral Field Infrared Spectrograph: Commissioning Results and On-sky Performance

We have recently commissioned a novel infrared ($0.9-1.7$ $μ$m) integral field spectrograph (IFS) called the Wide Integral Field Infrared Spectrograph (WIFIS). WIFIS is a unique instrument that offers a very large field-of-view (50$^{\prime\prime}$ x 20$^{\prime\prime}$) on the 2.3-meter Bok telescope at Kitt Peak, USA for seeing-limited observations at moderate spectral resolving power. The measured spatial sampling scale is $\sim1\times1^{\prime\prime}$ and its spectral resolving power is $R\sim2,500$ and $3,000$ in the $zJ$ ($0.9-1.35$ $μ$m) and $H_{short}$ ($1.5-1.7$ $μ$m) modes, respectively. WIFIS's corresponding etendue is larger than existing near-infrared (NIR) IFSes, which are mostly designed to work with adaptive optics systems and therefore have very narrow fields. For this reason, this instrument is specifically suited for studying very extended objects in the near-infrared such as supernovae remnants, galactic star forming regions, and nearby galaxies, which are not easily accessible by other NIR IFSes. This enables scientific programs that were not originally possible, such as detailed surveys of a large number of nearby galaxies or a full accounting of nucleosynthetic yields of Milky Way supernova remnants. WIFIS is also designed to be easily adaptable to be used with larger telescopes. In this paper, we report on the overall performance characteristics of the instrument, which were measured during our commissioning runs in the second half of 2017. We present measurements of spectral resolving power, image quality, instrumental background, and overall efficiency and sensitivity of WIFIS and compare them with our design expectations. Finally, we present a few example observations that demonstrate WIFIS's full capability to carry out infrared imaging spectroscopy of extended objects, which is enabled by our custom data reduction pipeline.

astro-ph.IM↗

arXiv2006

FISICA: The Florida Image Slicer for Infrared Cosmology & Astrophysics

We report on the design, fabrication, and on-sky performance of the Florida Image Slicer for Infrared Cosmology and Astrophysics (FISICA)- a fully-cryogenic all-reflective image-slicing integral field unit for the FLAMINGOS near-infrared spectrograph. Designed to accept input beams near f/15, FISICA with FLAMINGOS provides R \sim 1300 spectra over a 16x33-arcsec field-of-view on the Cassegrain f/15 focus of the KPNO 4-meter telescope, or a 6x12-arcsec field-of-view on the Nasmyth or Bent Cassegrain foci of the Gran Telescopio Canarias 10.4-meter telescope. FISICA accomplishes this using three sets of "monolithic" powered mirror arrays, each with 22 mirrored surfaces cut into a single piece of aluminum. We review the optical and opto-mechanical design and fabrication of FISICA, as well as laboratory test results for FISICA integrated with the FLAMINGOS instrument. Finally, we present performance results from observations with FISICA at the KPNO 4-m telescope and comparisons of FISICA performance to other available IFUs on 4-m to 8-m-class telescopes.

astro-ph↗

arXiv2006

FLAMINGOS-2: The Facility Near-Infrared Wide-field Imager & Multi-Object Spectrograph for Gemini

We report on the design and status of the FLAMINGOS-2 instrument - a fully-cryogenic facility near-infrared imager and multi-object spectrograph for the Gemini 8-meter telescopes. FLAMINGOS-2 has a refractive all-spherical optical system providing 0.18-arcsecond pixels and a 6.2-arcminute circular field-of-view on a 2048x2048-pixel HAWAII-2 0.9-2.4 mm detector array. A slit/decker wheel mechanism allows the selection of up to 9 multi-object laser-machined plates or 3 long slits for spectroscopy over a 6x2-arcminute field of view, and selectable grisms provide resolutions from $\sim$ 1300 to $\sim $3000 over the entire spectrograph bandpass. FLAMINGOS-2 is also compatible with the Gemini Multi-Conjugate Adaptive Optics system, providing multi-object spectroscopic capabilities over a 3x1-arcminute field with high spatial resolution (0.09-arcsec/pixel). We review the designs of optical, mechanical, electronics, software, and On-Instrument WaveFront Sensor subsystems. We also present the current status of the project, currently in final testing in mid-2006.

astro-ph↗

arXiv2001

The Optical/Infrared Astronomical Quality of High Atacama Sites. I. Preliminary Results of Optical Seeing

The region surrounding the Llano de Chajnantor, a high altitude plateau in the Atacama Desert in northern Chile, has caught the attention of the astronomical community for its potential as an observatory site. Combining high elevation and extremely low atmospheric water content, the Llano has been chosen as the future site of the Atacama Large Millimeter Array. We have initiated a campaign to investigate the astronomical potential of the region in the optical/infrared. Here, we report on an aspect of our campaign aimed at establishing a seeing benchmark to be used as a reference for future activities in the region. After a brief description of the region and its climate, we describe the results of an astronomical seeing campaign, carried out with a Differential Image Motion Monitor that operates at 0.5 micron wavelength. The seeing at the Llano level of 5000 m, measured over 7 nights in May 1998, yielded a median FWHM of 1.1". However, the seeing decreased to 0.7" at a modest 100 m gain above the plateau (Cerro Chico), as measured over 38 nights spread between July 1998 and October 2000. Neither of these represents the best seeing expected in the region; the set of measurements provides a reference base for simultaneous dual runs at Cerro Chico and at other sites of interest in the region, currently underway. A comparison between simultaneous measurements at Cerro Chico and Cerro Paranal indicates that seeing at Cerro Chico is about 12% better than at Paranal. The percentage of optically photometric nights in the Chajnantor region is about 60%, while that of nights useful for astronomical work is near 80%.

astro-ph↗

arXiv2001

The Optical/Infrared Astronomical Quality of High Atacama Sites. II. Infrared Characteristics

We discuss properties of the atmospheric water vapor above the high Andean plateau region known as the Llano de Chajnantor, in the Atacama Desert of northern Chile. A combination of radiometric and radiosonde measurements indicate that the median column of precipitable water vapor (PWV) above the plateau at an elevation of 5000 m is approximately 1.2 mm. The exponential scaleheight of the water vapor density in the median Chajnantor atmosphere is 1.13 km; the median PWV is 0.5 mm above an elevation of 5750 m. Both of these numbers appear to be lower at night. Annual, diurnal and other dependences of PWV and its scaleheight are discussed, as well as the occurrence of temperature inversion layers below the elevation of peaks surrounding the plateau. We estimate the background for infrared observations and sensitivities for broad band and high resolution spectroscopy. The results suggest that exceptional atmospheric conditions are present in the region, yielding high infrared transparency and high sensitivity for future ground-based infrared telescopes.

astro-ph↗

arXiv2000

Three modes of long wavelength flaring from GRS 1915+105: implications for jet formation

GRS 1915+105 has exhibited at least three modes of long-wavelength (infrared to radio) flares. Class A flares are the bright ($\sim 1$ Jy) radio events whose apparent superluminal motion in many ways defines the microquasars. Class B flares have intermediate ($\sim 50-300$ mJy) flux densities in the IR and radio, and are associated with hard X-ray dipping behaviors. Class C flares are faint ($\sim 5-50$ mJy) IR/radio events associated with soft X-ray dips. We discuss each of these classes and their inter-relationships.

astro-ph↗