arXiv subjects

Stephen H. Lubow

Publications and source records attributed to Stephen H. Lubow.

82 records · Page 5Linked to original sources

arXiv2011

Dead Zones around Young Stellar Objects: Dependence on Physical Parameters

Angular momentum is transported outwards through an accretion disc by magnetohydrodynamical (MHD) turbulence thus allowing material to accrete on to the central object. The magneto-rotational instability (MRI) requires a minimum ionisation fraction to drive turbulence in a disc. The inner parts of the disc around a young stellar object are sufficiently hot to be thermally ionised. Further out, cosmic rays ionise the surface layers and a dead zone forms at the mid-plane where the disc is too cool for the MRI to operate. The surface density in the turbulent active layer is often assumed to be constant with radius because the cosmic rays penetrate a constant layer. However, if a critical magnetic Reynolds number, Re_{M,crit}, is used to determine the extent of the dead zone, the surface density in the layer generally increases with radius. For small critical magnetic Reynolds number of order 1, the constant layer approximation may be a reasonable fit. However, MHD simulations suggest the critical magnetic Reynolds number may be much larger, of order 10^4. Analytical fits for the surface density in the magnetic active layer show that Σ_m \propto Re_{M,crit}^{-2} R^{9/2} T^{\,2}$, at temperature T and radius R, are a good fit for higher critical magnetic Reynolds number. For the metallicity variation between our galaxy, the LMC and the SMC, there should be no significant difference in the extent of the dead zone. Observations suggest an increase in the lifetime of the disc with decreasing metallicity that cannot be explained by the dead zone structure (ignoring possible differences in dust abundances).

astro-ph.SR↗

arXiv2011

The Gravo-Magneto Limit Cycle in Accretion Disks

Previous theoretical studies have found that repeating outbursts can occur in certain regions of an accretion disk, due to sudden transitions in time from gravitationally produced turbulence to magnetically produced turbulence. We analyze the disk evolution in a state diagram that plots the mass accretion rate versus disk surface density. We determine steady state accretion branches that involve gravitational and magnetic sources of turbulence. Using time-dependent numerical disk simulations, we show that cases having outbursts track along a nonsteady 'dead zone' branch and some steady state accretion branches. The outburst is the result of a rapid inter-branch transition. The gravo-magneto outbursts are then explained on this diagram as a limit cycle that is analogous to the well-known S-curve that has been applied to dwarf nova outbursts. The diagram and limit cycle provide a conceptual framework for understanding the nature of the outbursts that may occur in accretion disks of all scales, from circumplanetary to protoplanetary to AGN accretion disks.

astro-ph.SR↗

arXiv2011

Tidal Warping of Be Star Decretion Discs

Rapidly rotating Be stars are observed as shell stars when the decretion disc is viewed edge on. Transitions between the two implies that the discs may be warped and precessing. Type II X-ray outbursts are thought to occur when the warped disc interacts with the fast stellar wind. We suggest that tides from a misaligned companion neutron star can cause the observed effects. We make numerical models of a Be star decretion disc in which the spin of the Be star is misaligned with the orbital axis of a neutron star companion. Tidal torques from the neutron star truncate the disc at a radius small enough that the neutron star orbit does not intersect the disc unless the eccentricity or misalignment is very large. A magnetic torque from the Be star that is largest at the equator, where the rotation is fastest, is approximated by an inner boundary condition. There are large oscillations in the mass and inclination of the disc as it moves towards a steady state. These large variations may explain the observed changes from Be star to Be shell star and vice-versa and also the Type II X-ray outbursts. We find the tidal timescale on which the disc warps, precesses and reaches a steady state to be around a year up to a few hundred years. If present, the oscillations in mass and disc inclination occur on a fraction of this timescale depending on the orbital parameters of the binary. The timescales associated with the tidal torque for observed Be star binaries suggest that these effects are important in all but the longest period binaries.

astro-ph.SR↗

arXiv2010

Tidal Truncation of Circumplanetary Discs

We analyse some properties of circumplanetary discs. Flow through such discs may provide most of the mass to gas giant planets, and such discs are likely sites for the formation of regular satellites. We model these discs as accretion discs subject to the tidal forces of the central star. The tidal torques from the star remove the disc angular momentum near the disc outer edge and permit the accreting disc gas to lose angular momentum at the rate appropriate for steady accretion. Circumplanetary discs are truncated near the radius where periodic ballistic orbits cross, where tidal forces on the disc are strong. This radius occurs at approximately 0.4 r_H for the planet Hill radius r_H. During the T Tauri stage of disc accretion, the disc is fairly thick with aspect ratio H/r > 0.2 and the disc edge tapering occurs over a radial scale ~ H ~ 0.1 r_H. For a circular or slightly eccentric orbit planet, no significant resonances lie within the main body of the disc. Tidally driven waves involving resonances nonetheless play an important role in truncating the disc, especially when it is fairly thick. We model the disc structure using one dimensional time-dependent and steady-state models and also two dimensional SPH simulations. The circumplanetary disc structure depends on the variation of the disc turbulent viscosity with radius and is insensitive to the angular distribution of the accreting gas. Dead zones may occur within the circumplanetary disc and result in density structures. If the disc is turbulent throughout, the predicted disc structure near the location of the regular Jovian and Saturnian satellites is smooth with no obvious feature that would favor formation at their current locations.

astro-ph.EP↗

arXiv2010

Three-dimensional Disk-Planet Torques in a Locally Isothermal Disk

We determine an expression for the Type I planet migration torque involving a locally isothermal disk, with moderate turbulent viscosity (~0.0005 < alpha < ~0.05), based on three-dimensional nonlinear hydrodynamical simulations. The radial gradients (in a dimensionless logarithmic form) of density and temperature are assumed to be constant near the planet. We find that the torque is roughly equally sensitive to the surface density and temperature radial gradients. Both gradients contribute to inward migration when they are negative. Our results indicate that two-dimensional calculations with a smoothed planet potential, used to account for the effects of the third dimension, do not accurately determine the effects of density and temperature gradients on the three-dimensional torque. The results suggest that substantially slowing or stopping planet migration by means of changes in disk opacity or shadowing is difficult and appears unlikely for a disk that is locally isothermal. The scalings of the torque and torque density with planet mass and gas sound speed follow the expectations of linear theory. We also determine an improved formula for the torque density distribution that can be used in one-dimensional long-term evolution studies of planets embedded in locally isothermal disks. This formula can be also applied in the presence of mildly varying radial gradients and of planets that open gaps. We illustrate its use in the case of migrating super-Earths and determine some conditions sufficient for survival.

astro-ph.EP↗

arXiv2010

Planet Migration

Planet migration is the process by which a planet's orbital radius changes in time. The main agent for causing gas giant planet migration is the gravitational interaction of the young planet with the gaseous disk from which it forms. We describe the migration rates resulting from these interactions based on a simple model for disk properties. These migration rates are higher than is reasonable for planet survival. We discuss some proposed models for which the migration rates are lower. There are major uncertainties in migration rates due to a lack of knowledge about the detailed physical properties of disks. We also describe some additional forms of migration.

astro-ph.EP↗

arXiv2010

Eccentricity Growth Rates of Tidally Distorted Discs

We consider discs that orbit a central object and are tidally perturbed by a circular orbit companion. Such discs are sometimes subject to an eccentric instability due to the effects of certain resonances. Eccentric instabilities may be present in planetary rings perturbed by satellites, protostellar discs perturbed by planets, and discs in binary star systems. Although the basic mechanism for eccentric instability is well understood, the detailed response of a gaseous disc to such an instability is not understood. We apply a linear eccentricity evolution equation developed by Goodchild and Ogilvie. We explore how the eccentricity is distributed in such a disc and how the distribution in turn affects the instability growth rate for a range of disc properties. We identify a disc mode, termed the superhump mode, that is likely at work in the superhump binary star case. The mode results from the excitation of the fundamental free precession mode. We determine an analytic expression for the fundamental free mode precession rate that is applicable to a sufficiently cool disc. Depending on the disc sound speed and disc edge location, other eccentric modes can grow faster than the superhump mode and dominate.

astro-ph.SR↗

arXiv2008

Evolution of Migrating Planets Undergoing Gas Accretion

We analyze the orbital and mass evolution of planets that undergo run-away gas accretion by means of 2D and 3D hydrodynamic simulations. The disk torque distribution per unit disk mass as a function of radius provides an important diagnostic for the nature of the disk-planet interactions. We first consider torque distributions for nonmigrating planets of fixed mass and show that there is general agreement with the expectations of resonance theory. We then present results of simulations for mass-gaining, migrating planets. For planets with an initial mass of 5 Earth masses, which are embedded in disks with standard parameters and which undergo run-away gas accretion to one Jupiter mass (Mjup), the torque distributions per unit disk mass are largely unaffected by migration and accretion for a given planet mass. The migration rates for these planets are in agreement with the predictions of the standard theory for planet migration (Type I and Type II migration). The planet mass growth occurs through gas capture within the planet's Bondi radius at lower planet masses, the Hill radius at intermediate planet masses, and through reduced accretion at higher planet masses due to gap formation. During run-away mass growth, a planet migrates inwards by only about 20% in radius before achieving a mass of ~1 Mjup. For the above models, we find no evidence of fast migration driven by coorbital torques, known as Type III migration. We do find evidence of Type III migration for a fixed mass planet of Saturn's mass that is immersed in a cold and massive disk. In this case the planet migration is assumed to begin before gap formation completes. The migration is understood through a model in which the torque is due to an asymmetry in density between trapped gas on the leading side of the planet and ambient gas on the trailing side of the planet.

astro-ph↗

arXiv2006

Evolution of Giant Planets in Eccentric Disks

We investigate the interaction between a giant planet and a viscous circumstellar disk by means of high-resolution, two-dimensional hydrodynamical simulations. We consider planet masses that range from 1 to 3 Jupiter masses (Mjup) and initial orbital eccentricities that range from 0 to 0.4. We find that a planet can cause eccentricity growth in a disk region adjacent to the planet's orbit, even if the planet's orbit is circular. Disk-planet interactions lead to growth in a planet's orbital eccentricity. The orbital eccentricities of a 2 Mjup and a 3 Mjup planet increase from 0 to 0.11 within about 3000 orbits. Over a similar time period, the orbital eccentricity of a 1 Mjup planet grows from 0 to 0.02. For a case of a 1 Mjup planet with an initial eccentricity of 0.01, the orbital eccentricity grows to 0.09 over 4000 orbits. Radial migration is directed inwards, but slows considerably as a planet's orbit becomes eccentric. If a planet's orbital eccentricity becomes sufficiently large, e > ~0.2, migration can reverse and so be directed outwards. The accretion rate towards a planet depends on both the disk and the planet orbital eccentricity and is pulsed over the orbital period. Planet mass growth rates increase with planet orbital eccentricity. For e~0.2 the mass growth rate of a planet increases by approximately 30% above the value for e=0. For e > ~0.1, most of the accretion within the planet's Roche lobe occurs when the planet is near the apocenter. Similar accretion modulation occurs for flow at the inner disk boundary which represents accretion toward the star.

astro-ph↗

arXiv2002

Interactions of High and Low-Mass Planets with Protoplanetary Disks

We present three-dimensional numerical simulations of the interaction of a circular-orbit planet with a protoplanetary disk. We calculate the flow pattern, the accretion rate, and torques on the planet. We consider planet masses ranging from 1 Earth mass to 1 Jupiter mass.

astro-ph↗