arXiv subjects

Stephen Jesse

Publications and source records attributed to Stephen Jesse.

83 records · Page 5Linked to original sources

arXiv2011

Watching Domains Grow: In-situ studies of polarization switching by combined Scanning Probe and Scanning Transmission Electron Microscopy

Ferroelectric domain nucleation and growth in multiferroic BiFeO3 films is observed directly by applying a local electric field with a conductive tip inside a scanning transmission electron microscope. The nucleation and growth of a ferroelastic domain and its interaction with pre-existing 71^{\circ} domain walls are observed and compared with the results of phase-field modeling. In particular, a preferential nucleation site and direction-dependent pinning of domain walls is observed due to slow kinetics of metastable switching in the sample without a bottom electrode. These in-situ spatially-resolved observations of a first-order bias-induced phase transition reveal the mesoscopic mechanisms underpinning functionality of a wide range of multiferroic materials.

cond-mat.mtrl-sci↗

arXiv2010

Ferroelectric domain scaling and electronic properties in ultrathin BiFeO3 films on vicinal substrates

We report electrically switchable polarization and ferroelectric domain scaling over a thickness range of 5-100 nm in BiFeO3 films deposited on [110] vicinal substrates. The BiFeO3 films of variable thickness were deposited with SrRuO3 bottom layer using pulsed laser deposition technique. These films have fractal domain patterns and the domain width scales closely with the square root of film thickness, in accordance with the Landau-Lifschitz-Kittel (LLK) law. The Switching Spectroscopy Piezo-response Force Microscopy provides clear evidence for the ferroelectric switching behavior in all the films. Using Quasi-particle Self-consistent GW (QPGW) approximation we have investigated physical parameters relevant for direct tunneling behavior, namely the effective mass and effective barrier height of electrons. For rhombohedral BFO, we report a large effective barrier height value of 3.6 eV, which is in reasonable agreement with nanoscale transport measurements. QPGW investigations into the tetragonal BFO structure with P4mm symmetry revealed a barrier height of 0.38 eV, significantly lower compared to its rhombohedral counterpart. This difference has very significant implications on the transport properties of nearly tetragonal BFO phase.

cond-mat.mtrl-sci↗

arXiv2010

Nanoscale switching characteristics of nearly tetragonal BiFeO3 thin films

We have investigated the nanoscale switching properties of strain-engineered BiFeO3 thin films deposited on LaAlO3 substrates using a combination of scanning probe techniques. Polarized Raman spectral analysis indicate that the nearly-tetragonal films have monoclinic (Cc) rather than P4mm tetragonal symmetry. Through local switching-spectroscopy measurements and piezoresponse force microscopy we provide clear evidence of ferroelectric switching of the tetragonal phase but the polarization direction, and therefore its switching, deviates strongly from the expected (001) tetragonal axis. We also demonstrate a large and reversible, electrically-driven structural phase transition from the tetragonal to the rhombohedral polymorph in this material which is promising for a plethora of applications.

cond-mat.mtrl-sci↗

arXiv2007

Local Polarization Switching in the Presence of Surface Charged Defects: Microscopic Mechanisms and Piezoresponse Force Spectroscopy Observations

The thermodynamics and kinetics of tip-induced polarization switching in Piezoresponse Force Microscopy in the presence of surface charge defects is studied using the combination of analytical and numerical techniques. The signature of the defects in hysteresis loop fine structure and Switching Spectroscopy PFM images is identified and compared to experimental observations. An approach for the deconvolution of PFM spectroscopy measurements to extract relevant defect parameters is derived. This methodology is universal and can be extended to switching in other ferroics and in reversible electrochemical processes, establishing a pathway for the understanding of the thermodynamics and kinetics of phase transitions at a single defect level.

cond-mat.mtrl-sci↗

arXiv2007

The Band Excitation Method in Scanning Probe Microscopy for Rapid Mapping of Energy Dissipation on the Nanoscale

Mapping energy transformation pathways and dissipation on the nanoscale and understanding the role of local structure on dissipative behavior is a challenge for imaging in areas ranging from electronics and information technologies to efficient energy production. Here we develop a novel Scanning Probe Microscopy (SPM) technique in which the cantilever is excited and the response is recorded over a band of frequencies simultaneously rather than at a single frequency as in conventional SPMs. This band excitation (BE) SPM allows very rapid acquisition of the full frequency response at each point (i.e. transfer function) in an image and in particular enables the direct measurement of energy dissipation through the determination of the Q-factor of the cantilever-sample system. The BE method is demonstrated for force-distance and voltage spectroscopies and for magnetic dissipation imaging with sensitivity close to the thermomechanical limit. The applicability of BE for various SPMs is analyzed, and the method is expected to be universally applicable to all ambient and liquid SPMs.

cond-mat.mtrl-sci↗

arXiv2007

Towards local electromechanical probing of cellular and biomolecular systems in a liquid environment

Electromechanical coupling is ubiquitous in biological systems with examples ranging from simple piezoelectricity in calcified and connective tissues to voltage-gated ion channels, energy storage in mitochondria, and electromechanical activity in cardiac myocytes and outer hair cell stereocilia. Piezoresponse force microscopy (PFM) has originally emerged as a technique to study electromechanical phenomena in ferroelectric materials, and in recent years, has been employed to study a broad range of non-ferroelectric polar materials, including piezoelectric biomaterials. At the same time, the technique has been extended from ambient to liquid imaging on model ferroelectric systems. Here, we present results on local electromechanical probing of several model cellular and biomolecular systems, including insulin and lysozyme amyloid fibrils, breast adenocarcinoma cells, and bacteriorhodopsin in a liquid environment. The specific features of SPM operation in liquid are delineated and bottlenecks on the route towards nanometer-resolution electromechanical imaging of biological systems are identified.

cond-mat.other↗

arXiv2006

Nanoscale polarization manipulation and imaging in ferroelectric Langmuir-Blodgett polymer films

The behavior of ferroelectricity at the nanoscale is the focus of increasing research activity because of intense interest in the fundamental nature of spontaneous order in condensed-matter systems and because of the many practical applications of ferroelectric thin films to, for example, electromechanical transducers, infrared imaging sensors, and nonvolatile random-access memories. Ferroelectricity, in analogy with its namesake ferromagnetism, is the property of some crystalline systems to maintain a permanent, but reversible, electrical polarization in the absence of an external electric field. The imaging and dynamics of the piezoelectric response at the nanoscale is perhaps the most direct means of probing polarization, as has been demonstrated in a number of thin films and nanostructures . Here we report the use of piezoresponse force microscopy (PFM) and switching spectroscopy PFM (SSPFM) to image the ferroelectric properties, domain structure, and polarization switching of ultrathin ferroelectric Langmuir-Blodgett films of poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) copolymers. PFM imaging of P(VDF-TrFE) thin films reveals ferroelectric domain sizes on the order of 25-50 nm and an imaging resolution below 5 nm. The feature sizes in topography and PFM images are comparable and the boundaries of uniformly polarized regions coincide with topographic features. Arbitrary polarization patterns could be repeatedly written and erased, with writing resolution limited by the grain size. Hysteresis loops from individual domains show clear coercive voltage, but are not well saturated at +/-10 V amplitude.

cond-mat.mtrl-sci↗

arXiv2006

Piezoresponse Force Spectroscopy of Ferroelectric Materials

Piezoresponse Force Spectroscopy (PFS) has emerged as a powerful technique for probing highly localized switching behavior and the role of microstructure and defects on switching. The application of a dc bias to a scanning probe microscope tip in contact with a ferroelectric surface results in the nucleation and growth of a ferroelectric domain below the tip, resulting in changes in local electromechanical response. Resulting hysteresis loops contains information on local ferroelectric switching behavior. The signal in PFS is the convolution of the volume of the nascent domain and the probing volume of the tip. Here, we analyze the signal formation mechanism in PFS by deriving the main parameters of domain nucleation in a semi-infinite material and establishing the relationships between domain parameters and PFM signal using a linear Greens function theory. The effect of surface screening and finite Debye length on the switching behavior is established. In particular, we predict that the critical nucleus size in PFM is controlled by the surface screening mechanism and in the absence of screening, tip-induced switching is impossible. Future prospects of PFS to study domain nucleation in the vicinity of defects, local switching centers in ferroelectrics, and unusual polarization states in low-dimensional ferroelectrics are discussed.

cond-mat.mtrl-sci↗

arXiv2006

Electromechanical Detection in Scanning Probe Microscopy: Tip Models and Materials Contrast

The rapid development of nanoscience and nanotechnology in the last two decades was stimulated by the emergence of scanning probe microscopy (SPM) techniques capable of accessing local material properties, including transport, mechanical, and electromechanical behavior on the nanoscale. Here, we analyze the general principles of electromechanical probing by piezoresponse force microscopy (PFM), a scanning probe technique applicable to a broad range of piezoelectric and ferroelectric materials. The physics of image formation in PFM is compared to Scanning Tunneling Microscopy and Atomic Force Microscopy in terms of the tensorial nature of excitation and the detection signals and signal dependence on the tip-surface contact area. It is shown that its insensitivity to contact area, capability for vector detection, and strong orientational dependence render this technique a distinct class of SPM. The relationship between vertical and lateral PFM signals and material properties are derived analytically for two cases: transversally-isotropic piezoelectric materials in the limit of weak elastic anisotropy, and anisotropic piezoelectric materials in the limit of weak elastic and dielectric anisotropies. The integral representations for PFM response for fully anisotropic material are also obtained. The image formation mechanism for conventional (e.g., sphere and cone) and multipole tips corresponding to emerging shielded and strip-line type probes are analyzed. Resolution limits in PFM and possible applications for orientation imaging on the nanoscale and molecular resolution imaging are discussed.

cond-mat.mtrl-sci↗

arXiv2005

Dynamic Behavior in Piezoresponse Force Microscopy

Frequency dependent dynamic behavior in Piezoresponse Force Microscopy (PFM) implemented on a beam-deflection atomic force microscope (AFM) is analyzed using a combination of modeling and experimental measurements. The PFM signal comprises contributions from local electrostatic forces acting on the tip, distributed forces acting on the cantilever, and three components of the electromechanical response vector. These interactions result in the bending and torsion of the cantilever, detected as vertical and lateral PFM signals. The relative magnitudes of these contributions depend on geometric parameters of the system, the stiffness and frictional forces of tip-surface junction, and operation frequencies. The dynamic signal formation mechanism in PFM is analyzed and conditions for optimal PFM imaging are formulated. The experimental approach for probing cantilever dynamics using frequency-bias spectroscopy and deconvolution of electromechanical and electrostatic contrast is implemented.

cond-mat.mtrl-sci↗

arXiv2005

A Decade of Piezoresponse Force Microscopy: Progress, Challenges and Opportunities

Coupling between electrical and mechanical phenomena is a near-universal characteristic of inorganic and biological systems alike, with examples ranging from ferroelectric perovskites to electromotor proteins in cellular membranes. Understanding electromechanical functionality in materials such as ferroelectric nanocrystals, thin films, relaxor ferroelectrics, and biosystems requires probing these properties on the nanometer level of individual grain, domain, or protein fibril. In the last decade, Piezoresponse Force Microscopy (PFM) was established a powerful tool for nanoscale imaging, spectroscopy, and manipulation of ferroelectric and piezoelectric materials. Here, we present principles and recent advances in PFM, including vector and frequency dependent imaging of piezoelectric materials, briefly review applications for ferroelectric materials, discuss prospects for electromechanical imaging of local crystallographic and molecular orientations and disorder, and summarize future challenges and opportunities for PFM emerging in the second decade since its invention.

cond-mat.mtrl-sci↗