arXiv subjects

Stephen Millmore

Publications and source records attributed to Stephen Millmore.

5 recordsLinked to original sources

arXiv2026

A Structure- and Pressure-Positivity-Preserving Semi-implicit IMEX Finite Volume Scheme for Ideal MHD at All Acoustic Mach and Alfv\'en Mach Numbers with Generic Equation of State

We present a conservative, structure-preserving, finite-volume scheme for ideal MHD that ensures pressure positivity, remains applicable across all Mach and Alfven regimes, and handles general nonlinear equations of state. The scheme splits the MHD system into three sub-systems according to characteristic wave scales: an advective part for hydrodynamic transport, a magnetic part for velocity-field coupling, and a pressure part for pressure-velocity coupling. Nonlinear advective terms are explicit, while the other two sub-systems are implicit, yielding a mild, velocity-based CFL condition that is supported by extensive numerical evidence. This makes the scheme suitable for gas-pressure or magnetic-pressure dominated regimes and the incompressible limit. The implicit discretisation gives a pressure equation that reduces to an elliptic form in the low-Mach limit for ideal gases and general thermodynamics. Pressure positivity is ensured via a local conservation-preserving modification of the pressure-internal-energy relation, avoiding a posteriori clipping while preserving conservation. The divergence-free constraint is enforced exactly via constrained transport. Second-order accuracy is achieved with an IMEX Runge-Kutta time integration, TVD reconstruction for explicit fluxes, and central discretisation for implicit terms. The scheme is validated against numerous benchmarks, including high- and low-Mach regimes, strongly magnetised flows, and standard MHD shock problems in 1D and 2D, demonstrating accuracy, stability, and excellent shock-capturing.

math.NA↗

arXiv2022

Thermal Simulation of Millimetre Wave Ablation of Geological Materials

This work is concerned with the numerical simulation of ablation of geological materials using a millimetre wave source. To this end, a new mathematical model is developed for a thermal approach to the problem, allowing for large scale simulations, whilst being able to include the strong temperature dependence of material parameters to ensure accurate modelling of power input into the rock. The model presented is implemented within an adaptive meshing framework, such that resolution can be placed where needed, for example at the borehole wall, to further improve the computational efficiency of large scale simulations. This approach allows for both the heating of the rock, and the removal of evaporated material, allowing rate of penetration and the shape of the resulting borehole to be quantified. The model is validated against experimental results, which indicates that the approach can accurately predict temperatures, and temperature gradients within the rock. The validated model is then exercised to obtain initial results demonstrating its capabilities for simulating the millimetre wave drilling process. The effects of the conditions at the surface of the rock are investigated, highlighting the importance of understanding the physical processes which occur between the wave guide and the rock. Additionally, the absorptivity of the rock, and the impact this has on the evaporation behaviour is considered. Simulations are carried out both for isotropic rock, and also for a multi-strata configuration. It is found that strata between similar rock types, such as granite and basalt, absorptive properties pose little problem for uniform drilling. However, larger variations in material parameters are shown to have strong implications on the evaporation behaviour of the wellbore, and hence the resulting structure.

physics.geo-ph↗

arXiv2022

The Development of a Multi-Physics Approach for Modelling the Response of Aerospace Fastener Assemblies to Lightning Attachment

This work is concerned with the development of a numerical modelling approach for studying the time-accurate response of aerospace fasteners subjected to high electrical current loading from a simulated lightning strike. The electromagnetic, thermal and elastoplastic response of individual fastener components is captured by this method allowing a critical analysis of fastener design and material layering. Under high electrical current loading, ionisation of gas filled cavities in the fastener assembly can lead to viable current paths across internal voids. This ionisation can lead to localised pockets of high pressure plasma through the Joule heating effect. The multi-physics approach developed in this paper extends an existing methodology that allows a two-way dynamic non-linear coupling of the plasma arc, the titanium aerospace fastener components, the surrounding aircraft panels, the internal supporting structure and internal plasma-filled cavities. Results from this model are compared with experimental measurements of a titanium fastener holding together carbon composite panels separated by thin dielectric layers. The current distribution measurements are shown to be accurately reproduced. A parameter study is used to assess the internal cavity modelling strategy and to quantify the relation between the internal cavity plasma pressure, the electrical current distribution and changes in the internal cavity geometry.

physics.comp-ph↗

arXiv2021

An improved equation of state for air plasma simulations

This work is concerned with the development of a novel, accurate equation of state for describing partially ionised air plasma in local thermodynamic equilibrium. One key application for this new equation of state is the simulation of lightning strike on aircraft. Due to the complexities of species ionisation and interaction, although phenomenological curve fitting of thermodynamic properties is possible, these curves are intractable for practical numerical simulation. The large difference in size of the parameters (many orders of magnitude) and complexity of the equations means they are not straightforward to invert for conversion between thermodynamic variables. The approach of this paper is to take an accurate 19-species phenomenological model, and use this to generate a tabulated data set. Coupled with a suitable interpolation procedure this offers an accurate and computationally efficient technique for simulating partially ionised air plasma. The equation of state is implemented within a multiphysics methodology which can solve for two-way coupling between a plasma arc and an elastoplastic material substrate. The implementation is validated against experimental results, both for a single material plasma, and an arc coupled to a substrate. It is demonstrated that accurate, oscillation-free thermodynamic profiles can be obtained, with good results even close to material surfaces.

physics.comp-ph↗

arXiv2019

Multi-physics simulations of lightning strike on elastoplastic substrates

This work is concerned with the numerical simulation of elastoplastic, electromagnetic and thermal response of aerospace materials due to their interaction with a plasma arc under lightning strike conditions. Current approaches treat the interaction between these two states of matter either in a decoupled manner or through one-way coupled 'co-simulation'. In this paper a methodology for multiphysics simulations of two-way interaction between lightning and elastoplastic materials is presented, which can inherently capture the non-linear feedback between these two states of matter. This is achieved by simultaneously solving the magnetohydrodynamic and the elastoplastic systems of equations on the same computational mesh, evolving the magnetic and electric fields dynamically. The resulting model allows for the topological evolution and movement of the arc attachment point coupled to the structural response and Joule heating of the substrate. The dynamic communication between the elastoplastic material and the plasma is facilitated by means of Riemann problem-based ghost fluid methods. This two-way coupling, to the best of the authors' knowledge, has not been previously demonstrated. The proposed model is first validated against experimental laboratory studies, demonstrating that the growth of the plasma arc can be accurately reproduced, dependent on the electrical conductivity of the substrate. It is then subsequently evaluated in a setting where the dynamically-evolved properties within the substrate feed back into the plasma arc attachment. Results are presented for multi-layered substrates of different materials, and for a substrate with temperature-dependent electrical conductivity. It is demonstrated that these conditions generate distinct behaviour due to the interaction between the plasma arc and the substrate.

physics.comp-ph↗