arXiv subjects

Stephen Y. Chou

Publications and source records attributed to Stephen Y. Chou.

5 recordsLinked to original sources

arXiv2023

Significant Light Extraction and Power Efficiency Enhancement of Organic Light Emitting Diodes by Subwavelength Dielectric-Nanomesh Using Large-area Nanoimprint

To improve the power efficiency of light emitting diodes (OLEDs), we developed a novel OLED structure, termed Dielectric-Nanomesh OLED (DNM-OLED), fabricated by large-area nanoimprint lithography (NIL). A dielectric-nanomesh substrate with a subwavelength nanomesh grating patterned into glass releases the photons trapped in ITO and organic layers by guided modes into leaky modes. And the dielectric-nanomesh substrate modifies the entire OLED layers into a corrugated configuration, which further lowers the parasitic resistance and hence the operating voltage. For a red phosphorescent OLED in our demonstration, with the DNM-OLED structure, the light extraction efficiency was enhanced by 1.33 fold and the operating voltage was lowered by 46%, acting together, leading to a 1.8-fold enhancement in power efficiency. Besides red OELDs, the DNM-OLED structure was also shown to be able to work for green and blue OELDs and achieved enhanced light extraction efficiency (1.31 fold for green light, 1.45 fold for blue light) without further structure modification, which demonstrated the light extraction enhancement by the DNM-OLED is broadband.

physics.optics↗

arXiv2023

Over 100% Light Extraction Enhancement of Organic Light Emitting Diodes Using Flat Moire Micro-Lens Array Fabricated by Double Nanoimprint Lithography Over a Large Area

To improve the light extraction efficiency of organic light emitting diodes (OLEDs), we developed a novel substrate, i.e., a metamaterial based flat Moire micro-lens array formed using double nanoimprint, termed Mlens-array, consisting of a hexagonal moiré pattern pillar array. By choosing a low refractive index dielectric material for the pillar array and a high refractive index dielectric material for the layer capped on top of the pillar array, we fabricated the Mlens-array behaving as a conventional convex optical micro-lens array. The Mlens-array was fabricated on a 4-inch wafer-size glass substrate by double-cycle compositional nanoimprint lithography (NIL) which is easy for achieving high throughput fabrication in large-scale. Applying the Mlens-array substrate in a typical green-emitting OLED, the light extraction efficiency was enhanced by over 100% (2.08-fold) compared to a control device fabricated on the conventional planar glass substrate.

physics.optics↗

arXiv2023

Enhancing Light Extraction of Organic Light Emitting Diodes by Deep-Groove High-index Dielectric Nanomesh Using Large-area Nanoimprint

To solve the conventional conflict between maintaining good charge transport property and achieving high light extraction efficiency when using micro/nanostructure patterned substrates to extract light from organic light emitting diodes (OLEDs), we developed a novel OLED structure, termed High-index Deep-Groove Dielectric Nanomesh OLED (HDNM-OLED), fabricated by large-area nanoimprint lithography (NIL). The key component is a nanostructure-patterned substrate embedded with a high-index deep-groove nanomesh and capped with a low-index planarization layer. The high-index and deep-groove nanomesh efficiently releases the tapped photons to achieve significantly enhanced light extraction. And the planarization layer helps to maintain the good charge transport property of the organic active layers deposited on top of it. For a green phosphorescent OLED in our demonstration, with the HDNM-OLED structure, compared to planar conventional ITO-OLED structure, the external quantum efficiency (EQE) was enhanced by 1.85-fold from 26% to 48% and power efficiency was enhanced by 1.86-fold from 42lm/W to 79lm/W. Besides green OELDs, the HDNM-OLED structure was also shown to be able to work for red and blue-emitting OELDs and achieved enhanced light extraction efficiency (1.58-fold for red light, 1.86-fold for blue light) without further structure modification, which demonstrated the light extraction enhancement by the HDNM-OLED is broadband.

physics.optics↗

arXiv2008

Fabrication and Characterization of Large Area Metallic Nano-Split-Ring Arrays by Nanoimprint Lithography

This paper presents a novel method to parallel fabricate large area (wafer scale) metallic nano-split-ring arrays with nanoimprint lithography (NIL). To our knowledge it is the first method that can pattern large area and high dense metallic split-ring arrays with advantages of high throughput, low-cost and simplicity. This method makes metallic nano-split-ring arrays, which was somehow conceptual before, practically useful. The optical properties of the fabricated gold nano-split-ring arrays with different parameters were measured. They show very obvious magnetic response to the incident light (which shows 10dB extinction ration in transmission spectra). The structure fabricated by this method can generate magnetic response in optical range with relatively large feature size that relax the requirement of resolution on lithography.

physics.optics↗

arXiv2005

Overlay Alignment Using Two Photonic Crystals

In this paper we proposed a novel overlay alignment method using two sets of identical photonic crystals (PhCs). In this method the reflection or transmission spectrum of the two overlaid photonic crystals is measured to help wafer tilt, yaw rotation, and translation aligning. The initial testing results with two 1D photonic crystals and analysis of the alignment accuracy are presented. This method is particularly useful in building photonic crystal stacks with nanoimprint lithography (NIL).

physics.optics↗